To all friends who using n1.. im have about 1 question.... could be all n1 will be die brcause power button issue????? I really love my n1.. so afraid my device will die because of that.... anyone have answer? Or its just defect device who counter that problem?
Sent from my Nexus One using XDA App
Best suggestion I can give you is to get root and use a ROM with trackball wake/unlock. This will reduce the use of the power button to almost nothing. You could also then use quick boot to allow reboot to recovery, bootloader or normal. All without touching the power button ever.
Some devices have faulty power button. Some don't.
I don't know how lucky you are with your device, and I don't know how gentle you are with the power button, so it's impossible to tell if your power button will fail or not.
In any case, as suggested above, using trackball wake can lower the chances of it failing.
U said some have some dont... that mean not all could possible became faulty.. usually how long the device became faulty? 4 month? 6 month? Or over 1 years? Currently im using widgetlocker to unlock via trackball...
Sent from my Nexus One using XDA App
I have had mine since about a week after release. My power button is still like new. I have never had to push it twice to do the same thing.
Mine broke about a month ago, i bought ti a couple of weeks after release.
I used quick boot to reboot it, screen off and lock app to turn the screen off, trackball wake to turn it on. And if you need to turn the phone back on, you can plug it into power and pull the battery a few times.
Power button is fine after a year. But I avoid it as much as possible by using Quick boot, Lock, & Trackball wake.
That mean all possible became faulty!!. Right now im avoid it using power button.. i use widgetlocker and screen off and lock free on market.it help me to turn off screen without touch ur power button
Sent from my Nexus One using XDA App
It's kinda strange, I keep hearing of these issues with the power button...
I had to have dropped my N1 at least 5 times straight on the power button. Almost split the device in half one time doing it. Power button never failed on me, nor did any other hardware come to think of it. And I still sold it. lol.
are-red said:
That mean all possible became faulty!!. Right now im avoid it using power button.. i use widgetlocker and screen off and lock free on market.it help me to turn off screen without touch ur power button
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
It IS a possibility that your power button will go bad. It is a possibility it may not. No one can say for sure that, yes your power button will quit working. The less you physically push it, the longer it will last, obviously.
Mines been fine and I've been using it regularly since April, I think the issue affected more of the early Nexuses than the later made ones.
My power button is starting to lose it's functionality and I am sad about it. It's still usable but my alternatives is using quickboot, trackball wake, and lock screen app. I barely use my power button now.
Jep4444 said:
Mines been fine and I've been using it regularly since April, I think the issue affected more of the early Nexuses than the later made ones.
Click to expand...
Click to collapse
Mine is an earlier model. Bought the 2nd week available, but no problems as of yet.
Maybe..not all device could be became faulty because of power button... take good care ur n1 dude...
Sent from my Nexus One using XDA App
Related
Has anyone figured out a solution for the faulty power button? It is killing me i can't wake my phone sometimes and now that i have Froyo i get no blue light notification so my reply to peoples text messages are VERY slow.
DaUub said:
Has anyone figured out a solution for the faulty power button? It is killing me i can't wake my phone sometimes and now that i have Froyo i get no blue light notification so my reply to peoples text messages are VERY slow.
Click to expand...
Click to collapse
Modaco-Paul is working on Trackball Wake! http://twitter.com/PaulOBrien/status/14543157295
You should still have light notifications in 2.2. Is yours not working?
I only get White notifications and it doesnt blink as fast and work sometimes
Has anyone worked out exactly why these power buttons are dying? Mine's dead as a doornail too
this is pretty funny to me cuz mine was not working in the morning anyways i THINK it has to do with some dust collecting on it (like the trackball) i blew on it a lil and it started working again also i read somewhere else about a wire that has a 90 degree angle so you might try pushing the power button forward then down
This is certainly the most annoying issue on Nexus one...
I use a combination of "no lock" and "lock 2.0" to enable trackball wake and turning off via home screen. And when I need to reboot I use the "plug-remove battery-replace battery" trick...
If someone has better solutions, we'll be glad to hear them, since it seems that this problem will eventually hit all Nexus one users.
I use fancy widget - In the clock settings, I selected application when clock pressed (lock enabler app). This solves the locking problem without pressing the power.
Use the usual trackball wake as the unlocker.
elio said:
This is certainly the most annoying issue on Nexus one...
I use a combination of "no lock" and "lock 2.0" to enable trackball wake and turning off via home screen. And when I need to reboot I use the "plug-remove battery-replace battery" trick...
If someone has better solutions, we'll be glad to hear them, since it seems that this problem will eventually hit all Nexus one users.
Click to expand...
Click to collapse
My situation is:
My Nexus is with non funcioning power on switch.
What is the solution to power on phone after i need to switch battery or Sim Card,
Thank You.
I have the same problem.Is it hardware or software issue?
I used the call Google and get a warranty replacement trick
Seriously, just call and get it replaced under warranty, that's the only real fix. They are aware of the problem. My phone is rooted, I didn't mention that, and they didn't have a problem with it, and I got my replacement within a few days.
Now that they've stopped selling them, it may not be as easy, but worth a try.
This is a serious issue for people outside countries that sell the nexus one.
I live in brazil and I hope this problem doesn't appear to me because it's cheaper to try to fix it than travel to usa.
Sent from my Nexus One using XDA App
As mentioned above, for people outside the US, replacement of the device is not an easy task; and even for those who get a replacement, the problem will eventually recur, since it seems obvious now that this is a hardware issue.
As for how to reboot the device: plug it to the charger (usb or main), wait for the orange led to turn on, remove the battery, as soon as the led will turn off replace the battery and the phone will boot.
I've had two bad power buttons, they were a hardware issue replaced under warranty.
Does anyone have any experience of getting a replacement from HTC in Singapore for this power button failure issue?
I bought my phone in the Google Online Store on my last vacations in US, I live in Mexico and call to HTC for the warranty but theres no solution outside US.
I use compressed air in the power button and works a little without the battery cover.
Sent from my Nexus One using XDA App
I had exactly the same problem. then i read about it in the nexus one forum and some folks mentioned, that deinstalling the app "advanced task killer" solved their problem. i tried it and now my power button is back to normal and working like a charme!
there is a program in the market to get it to wake from the trackball but I can't remember the name. I had the same problem and had to send it back to HTC and they fixed it for free. They told me there has numerous problems with the wake/power button.
Are ALL N1 fated to have the power button break? I just bought a Nexus One and i wan't to know if i should return it whilst i still can.
Some background info:
http://www.androidguys.com/2010/09/...yscom+(AndroidGuys)&utm_content=Google+Reader
Sent from my Nexus One using XDA App
Put me in the broken power button club. After going through a few months of the power button acting up, well it finally quit working. The good news is I still have 3 weeks remaining on my 1 year warranty, the bad news is the N1 has an unlocked bootloader. I called HTC last night and they emailed me an overnight shipping label. I chose the repair option instead of replacement. I did not discuss the unlocked bootloader with them. Since this is a hardware issue I can't see why they would deny the repair.
BTW, that is a great link on how to get the phone to turn on, I kept trying all last night to get it to come on by pressing the power button. If they deny the repair I will have them send it back and try one of the alternatives to turning the phone on and off.
I am currently using the Evil desire rom, should I flash back to a stock rom before sending it back.
Thanks.
I have been reading about broken power button issues all over the internet due to the ribbon cable connecting the board with the power button to the main circuit board.
Does anyone know, if HTC did anything to fix this issue at all on the SLCD version? Mine is working fine so far, but I am feeling paranoid about it every time I press the power button as I use this phone. Have had this phone for about 2 months.
Should I just use one of those trackball wake apps and avoid touching this button? Anyone know if when the phone is in the pocket the trackball will get pressed? As I don't want it to keep turning on and lose battery but i'd rather it did that than broke my power button.
Thanks
syl0n said:
I have been reading about broken power button issues all over the internet due to the ribbon cable connecting the board with the power button to the main circuit board.
Does anyone know, if HTC did anything to fix this issue at all on the SLCD version? Mine is working fine so far, but I am feeling paranoid about it every time I press the power button as I use this phone. Have had this phone for about 2 months.
Should I just use one of those trackball wake apps and avoid touching this button? Anyone know if when the phone is in the pocket the trackball will get pressed? As I don't want it to keep turning on and lose battery but i'd rather it did that than broke my power button.
Thanks
Click to expand...
Click to collapse
They didn't fix anything, my N1's power button got destroyed in two months and I have the SLCD version, went back to the store and got a swap...now I haven't used it for a month or so using trackball wake and sleep widget
Thanks for the tip. I guess I will do the same as you and avoid this messy failure. As I had to import my N1 from overseas, it is unlikely I will get warranty easily without jumping through multiple hoops and long delays.
BTW what is the best app for trackball wake that doesn't require root?
syl0n said:
Thanks for the tip. I guess I will do the same as you and avoid this messy failure. As I had to import my N1 from overseas, it is unlikely I will get warranty easily without jumping through multiple hoops and long delays.
BTW what is the best app for trackball wake that doesn't require root?
Click to expand...
Click to collapse
No clue to be honest, I'm using Cyanogen and it has both sleep and wake features integrated...
Heard about some widgets but forgot the names and dunno if they require root...maybe someone can help
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
ummm the power button on the nexus one has an incredibly high failure rate, all over the forum here. its a design defect from the factory. that's why it has always been recommended to root the device immediately, and use trackball wake, so you avoid using the power button as much as possible. you have to send the device to HTC for repair, that's your only option...
Thanks for the information. I will have to look into repairs.
You are already running a rooted rom with track all wake. Use it. To reboot the the phone use quickboot. At this stage you really don't need the power button on your phone.
pcflet01 said:
... now that I have installed CM7.
I push the power button and the screen turns on and then back off almost immediate
Click to expand...
Click to collapse
This is a problem with CM7. Most advise turning off the screen off animation if it becomes a big problem for you. Make sure you are using the newest nightly and hope for a fix. I don't know if the RC's have this problem, but I would bet it appears on the 7.0.3 release.
At first glance that seems to have helped. Thanks for the advice!
No problem.
Also you can use widget locker to lock the screen then the trackball to wake, with that and quickboot I don't even touch my power button anymore. Although your problem doesn't sound like a broken power button so in your position I would switch ROMs and see what happens.
pcflet01 said:
I have an AT&T unlocked Nexus One that I recently flashed to CM-7.0.3-N1 . I have had a problem unlocking the device with the power button both when I was running stock Gingerbread and now that I have installed CM7.
When the screen is off and my N1 is in standby, I push the power button and the screen turns on and then back off almost immediately. Sometimes there is a half second delay before the screen turns on and then off. This usually goes on 2 or 3 times until the screen will stay on and I can unlock my phone.
Has anyone seen or heard of this problem, and maybe knows of a fix? It could be hardware related, but the button definitely sends a signal to the phone and it works fine to shutdown or turn on the device from completely off. Thanks.
Click to expand...
Click to collapse
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
As others have mentioned, this does not sound like a powerbutton issue, because the powerbutton still turns on the screen. The problem is that the screen turns off immediately after it turns on.
When you flashed 7.0.3, did you come from a previous CM verison? From stock? My first suggestion would probably be to wipe the /system partition (in CWM, it is under mounts and storage -- with Amon_RA, you need to find a flashable zip to do it) and reinstall CM and gapps. This will not cause any data loss. Sometimes, if you install a new ROM over an old one, the upgrade script in CM can get confused and carry over files that aren't supposed to be carried over. The system wipe fixes that.
I've been using this RC since it came out in late June. Only this week did it start flipping out on me.
Sent from my Nook Color!
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
bassmadrigal said:
It still can't hurt anything to do a system wipe, just in case something got screwed up (these things can be so temperamental at times). And, like I said, you won't lose any of your data.
Click to expand...
Click to collapse
I'm currently using S2E for apps2ext and some data2ext. How would a system wipe and reinstall interact with that? I'm a bit nervous on that front.
A system wipe shouldn't change any of that. It is one benefit of using S2E as it is a standard app that is stored in the /data partition without any changes to the /system partition.
Anyway, to be safe, it is a good idea to do a nandroid backup anytime you are doing something that involves the majority of the features in recovery.
It's a hardware problem for me. Failed completely as of today.
Sent from my Nexus One using Tapatalk
CM7 7.1.0
My power button seems to be in the process of completely failing. The new CM7 update to 7.1.0 has made it possible for me to lock the screen without using the power button using the "Notification power widget" -> "Go to sleep". Now the only times I have to use the power button are to shut the phone down or wake it up, which seems to be easier when the phone is plugged in to a wall charger. Are there any simple apps for shutting the phone down and maybe waking it up at a set time?
The only reliable trick I found to turn it back on was to plug into the wall and take the battery out/in a few times till it vibrated.
I ended up getting a replacement phone and then I sent the Nexus to HTC. They quoted a $55 repair cost off warranty which my credit card insurance would've covered, but when I asked for an invoice they offered to just waive the charges. Finally over a month later it came back fixed.
The app Easy Reboot can shut the phone down.
Sent from my Nook Color!
I also use an app called Lock Screen, which just locks the screen. I have it stored in my dock, because I don't like the space being used in the notification widget.
CM7 has an option for one of the items in the notification tray widget to be a lock screen button.
cmstlist said:
I'm experiencing exactly this too on the latest RC. It doesn't seem to be complete button failure but it's acting like I've pressed it twice sometimes. Disabling the screen-on animation does seem to prevent it from popping back on. But it still sometimes goes on-then-off when I wake it with the power button. So now I'm using trackball wake too.
Click to expand...
Click to collapse
THANK YOU!!!! This has been driving me crazy. Turning off the screen-off animations did nothing, but turning off the screen-on animation seems to have fixed the issue. My power button is toast (my new power button ribbon cable just arrived... time for surgery), and I've been using the trackball to wake my phone. Before the power button died, it did the same thing. I'm using CM7.2. I installed it after rooting and went straight to cm7.2 from stock, so obviously the cyanogemnod crew haven't fixed the issue since 7.0.3 when this thread started.
Hi guys! I am buying a Nexus One. I just read about the power button problem. I wanted to know if there is any way that I could take care of my power button so that it does not break. I also wanted to know if there was a possible way of remapping the power button, for example the power button dies out on me, I could use the Volume up button to power on my device (cold boot).
Well that depends if you're running stock ROM or rooting and installing a custom ROM. I'm gonna assume you're gonna root and say to get a ROM with trackball root. This way you can unlock with the trackball and save your power button. You can also get a one of many apps that lets you lock the phone from a homescreen widget.
If you're not planning on rooting you could install GoLocker which would let you unlock with the volume rocker. Think the locking widgets should still work too.
Hope that helps.
I read somewhere that pressing the power button from the side closest to the headphone jack would also prevent damage to it. Is this true? I haven't really gotten my N1 yet so it's kind of hard to visualize how the power button works on it.
Yeah like addam360 stated, I use CM7 ROM with trackball unlock/trackball wake.
Barely use my power button. There's also app like Quickboot which let me reboot or reboot to recovery without having to use the button.
CM7 ROM also have an option to shut down via widget.
As for which side to push I really couldn't tell you.
DashBlacK said:
I read somewhere that pressing the power button from the side closest to the headphone jack would also prevent damage to it. Is this true? I haven't really gotten my N1 yet so it's kind of hard to visualize how the power button works on it.
Click to expand...
Click to collapse
I've had my N1 for over a year with no power button issues - Check out my signature; I did a huge long post explaining my reasoning.
zuberio said:
I've had my N1 for over a year with no power button issues - Check out my signature; I did a huge long post explaining my reasoning.
Click to expand...
Click to collapse
So that's where I got the info of pressing closest to the audio jack. Thanks very much for the info. So what if I were to place a thin piece of paper between the trace and the plastic power button head so that it does not press down on the trace? Do you think this will help preserve the trace?
I have had my nexus one for a year and 8 months, I haven't payed attention to where I click the button and its still working properly.
Sent from my Nexus One using xda premium
msavic6 said:
I have had my nexus one for a year and 8 months, I haven't payed attention to where I click the button and its still working properly.
Click to expand...
Click to collapse
Mine failed around that time. Luckily still under warranty so HTC fixed it. (Audio jack went at same time and fixed also)
Sent from my Nexus One using XDA App
DashBlacK said:
So that's where I got the info of pressing closest to the audio jack. Thanks very much for the info. So what if I were to place a thin piece of paper between the trace and the plastic power button head so that it does not press down on the trace? Do you think this will help preserve the trace?
Click to expand...
Click to collapse
If anything, that would probably push the trace down more every time you pressed the power button. If you really want to try a fix, see about grinding down the part of the power button above the trace - that way you won't accidentally press it on the wrong side.
I'm using an EVO 3d so I don't have insight for the N1 but I do know moving parts break. It's one reason I think slideout keyboards are retarded. But most aosp roms allow trackball wake. Me personally I think my volume down is going out. Scrolling in recovery to my download folder is like 16 presses lol. Lucky for me I can get a new back cover and be back to new.
Sent from my PG86100 using Tapatalk
I have a dead power button that I think is broken or have a dust in it that can't make it work.
I have read several threads about it.
For example the phone is off and i cant turn it on by power button is there any way to make it on?
using ADB?
or using a CM7/CM9 ROM? (some says that if you plug the charger it will automatically turn on)
or any methods that you can recommend?
I can relate, it's becoming quite common. Mine is slowly dying. I have volume rocker wake enabled and touch wake also. My understanding from reading other peoples problem is that it should turn on when plugged in with ics.
But if you are not on ics then i don't know how you'll turn it on to flash.
Sorry i cant help more
Sent from phone with app
Mine died to....get a rom that can utilize the volume wake feature to use ur power buttons...I did that for a while until I got it fixed like last week
Sent from my SGH-I897 using xda app-developers app
Thanks you too. Im using legend 5 and got MIUI locker for a while that it can wake up by using vol buttons. Used button remapping also for the power function. XD
Sent from my SAMSUNG-SGH-I897 using xda premium
Do at your own risk:
It's really easy to use a small( I mean correct size for the screws) screwdriver and pull the back plate off the phone and give everything a good cleaning out. You won't believe the junk you find in there. Chances are there's junk up in the power button. I used to have power button issues till I took it apart and cleaned it.
There is a guide(with pics) to tear it down and put it back together somewhere....
I've probably disassembled mine 3 or 4 times. Never had any trouble i only use 3 of the 6 screws to hold the back plate on. it's easier to deal with only three.
also you can use your fingernail to peel back the plastic by the screen and power button area. once you do this try your best to press your lips up to the phone and blow air through the crack. I use this almost every two weeks to get my power button to behave properly.
I think it's possible to replace the power button, might require soldering. I'm not sure, I've never needed to do it.
Hope this resource helps