Hi everyone.
I just have a question regrading my SGS. It looks like my phone is bricked, however i thought to ask this question just in case someone knows something i dont.
My phone was going fine for a while. I was/have been flashing ROM's for a while now through Odin. So i know how to work it. However something went wrong last night.
I was running a custom ROM (DebusROM) and working fine. With Speedmod Kernel and LAGFIX. I decided to flash a stock ROM via Odin to start fresh. I first disable the lagfix (converted back to rfs) and it was booting fine still. I then flashed in Odin stock JPX. It booted into andriod fine, however the screen was working, but touch was not. I figured something wrong with the ROM and tried to flash JG4 instead, which has always worked in the past.
However, once done, it did not boot into Android. Just kept looping back to the i9000 boot screen. I can get into Download mode, but recovery is unavailable. I also tried flashing with re-partition, but also, no luck.
From some of the posts around, people have mentioned corrupt internal storage. I am starting to think this may be the case. Has anyone had a similar problem and were able to solve it?
good luck i had the same issue but i cant get to download mode have you tried a reflash with odin
Have you tried JM9 With 512 pit repart?
If not, you should give it a go.
I have tried to flash in Odin. But only single .tar files. And going to try with an old 3 file and .pit.
RMonst3r said:
Have you tried JM9 With 512 pit repart?
If not, you should give it a go.
Click to expand...
Click to collapse
Downloading JM9 now. Ill try and let you all know how it goes.
EDIT: Same problem. Goes through Odin OK. Says success. However still unable to boot. Think its safe to say its bricked.
is it a bell?
it seams that you have a defect phone.
can be the internal sdcard that's defected.
but you should be able to go into the recovery.
maby your boot sector is corrupt.
if you don't find any solution you can always flash a full firmware with a new boot sector. but do this only if you don't find any solution. this can brick your phone, but it can also solve your problem.
if all goes wrong you could always send it to a repair center.
**DamianGTO Steam kernel. 350MB Ram. 500HZ. all ext2. Steam Rom. Js5**
*EDIT*
OK. I got it working again. I had to re-flash the 3-Button Fix as found in here: http://forum.xda-developers.com/showthread.php?t=785201
Then reflashed the stock JPX ROM.
FYI if anyone else experiences the same problem.
Related
Searched all threads but can't seem to find anyone else reporting the same error, so if it's been asked before can someone link to the correct thread.
Here's the story....
After a beer fuelled flash frenzy one night I forgot to disable Voodoo lagfix, this was originally set through the extended CWM boot options via Doc's 7.(can't remember exactly which one). The result of this stupidity is whenever I flashed a new rom and tried to apply any lagfix the phone will start up, display a long stream of text and then reboot.
I've tried flashing another firmware through Odin, got things back up and running, put the directory in root to disable the lagfix if it's still there, reflashed just to clear anything still lurking around.
No matter what I try now, I cannot enable any lagfix from the CWM menu options without going back into the verbose boot loop.
I can get into download mode when it's like this but not update, so the only option is to reflash the whole thing.
As I said at the start, I've searched for a couple of days but still can't seem to find anyone else getting this
51 views and not even a "use the search function and you'll find xxxxx thread" ??
I'd reflash it all..
IDK what rom you were using or planning to use but i'd just repeat the flashing process as you did first.
For JPO that would be flashing to JM8 with 512 pit and re-partition. Then the JPO with 813 pit and no repartition.
From there you can try everything else you planned. Like flashing CF-Root and working from there.
But im a noob so not sure that will fix your problem, just an idea. Just "erasing" everything basically.
I'd tried that, although I didn't redo JPO through Odin, I used the update from Doc.
I'll give that a try, but even if I flash JM8 and try to apply OCLF it goes into the mad loop.
Oh well I carry on blindly stumbling along trying stuff until it works
Hi guys,
I have browsed the forum and have tried several of the remedies here but still no luck. I have been running Darkyy's 9.0.2 rom for a few weeks now, with a 500hz- speedmod kernel (don't remember what flavour, but was flashed via CWM). It has been running great since I flashed.
The problem arose when I went into settings to simply change the lock screen. I selected another lockscreen and my phone rebooted. Then it gave me quite a few FC errors,so I decided to boot into recovery and 'restore' a previous save. Now my phone just shows the samsung logo and reboots.
I am able to get into download mode but not recovery. This will be the fourth time I have to send it away. Is there another option or is this still my only option?
Any thing specific I should try to flash.
If it helps I am on the BEll network (gt-i9000M)
try to flash JPY base stock ROM with Odin......
try without repartition and pit (1 file PDA, no pit file from samfirmware.com)....
Then flash the latest speedmod kernel.....
Now it should work (maybe! XD)!!
Thanks for your reply, I tried your suggestion but still the same problem. I also tried all of the suggestions on this link. I finally was able to get into the recovery console by flashing JPY (no part, no pit), then immediately flash JL2 (with bootloader, no flash, no pit) but I got the dreaded 'no such directory'...again. So I am SOL but have to take it back today.
Did you tried flashing with 3 files + pit + repartition?
With this method it should work...
Remember: no bootloader update!
Sent from my GT-I9000 using XDA App
Did you ever upgrade to the official Bell JL2? If not, I'd probably do that through Odin and have it update the bootloader. I had gone from JH2 to different cooked roms and would always run into corruption/fc problems a week later. And eventually the phone would just not boot into the OS. The last time it happened, even flashing to another cooked ROM would not work. The official bell JL2 has an bootloader update that seemed to have fixed the issues I was having.
Booted official JL2 and remembered how much I hated lag After that, flashed a 2e kernel through Odin then seeARM's cooked JL2 through clockwork. Been running that for 3 weeks now without any issues.
Hi Guys,
I should probably write down what I flash when I flash it. I honestly do not remember what I flashed. I went through all the threads I could find and tried everything. So to answer your question, I cannot say for sure if I did that or not. But I ended up sending the phone away. It was weird, I asked my fiance to take my phone in while I was at work. She called me later that day and told me that her phone did the same thing so she sent hers back the same day....weird.
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
Hi,
This is my first time experimenting with flashing custom roms. I was trying to flash a custom rom onto my perfectly working newly rooted sgs (using odin), but the first rom i tried has gotten my phone to boot loop and now I don't know what to do with it. I can get to the download screen just fine and recovery mode but don't knwo what to do. Please help, I really can't afford a new phone/ don't know if samsung will let me replace it now.
Oh, the rom was the XXJVK Gingerbread which is near the top of the forums right now, if that helps at all.
I really just need my phone to be usable, I didn't expect to mess it up. Thanks again to anyone with information.
I assume you were running jl2. The problem might be because of bootloader issue.
When you were flashing gingerbread did you use pit file and repartition?
I am not a pro but If you download JL2 and flash it, should be good to go. Try not to repartition and flash without using pit file.
I did use the .pit and repartition. I'm guessing this was a no no? I'll look for jl2 and try flashing that. Might you direct me to the right download?
http://www.multiupload.com/6GRS1OWRJW
I have no idea if it will work or not. Same thing happened to me also when I was trying to flash darkys rom and I was able to open the phone after I flashed with bells original rom. Give it a try. If its a boot loop I assume its a firmware problem. You should be able to fix it. The problem might be the repartirion and pit file. I am not sure about it. Hope this helps.
Just try flashing again with boot loader update ticked in odin. I'm pretty sure that repartition and pit do nothing to the bootloader. If that doesn't work I'll add more after I shower, I stink!
Sent from my GT - I9000 running Darky's 9.5 w/ DamianGTO's Ultimate Kernel using XDA Premium App.
A bootloop = ****ed framework and/or /system/ (rom)
Flashing bootloaders will not fix the problem, they are not related at all. And if a bootloader flash fails your phone will actually be bricked.
Just flash a stock rom with odin. I recommend jl2 if you want to go official stock, js8 for fastest froyo stock or jvk for the latest leaked beta. Tick update bootloaders for jvk or jl2 flash because jvk requires jvk bootloaders and jl2 because it supposedly fixes corruption problems. Remember bootloaders are overwritten every time you flash them and us risky.
Sent from my GT-I9000 using XDA Premium App
Thanks a million guys, I did flash the stock jl2 (no .pit or partition, nor bootloader update) and the phone booted. It fed me a gajillion force closes, but i managed to connect to kies and updated it that way, so now I have a perfetly working phone again. I'll probably experiment with a few more things now that I know how to fix this.
Again, Thanks guys!
Today, my phone became laggy and I restarted my phone, however it didn't boot past the samsung galaxy s i900m screen. It never reaches the animation screen.
This happened before and after hours of trying different methods i sent it in to get fixed but now it has happened again and i want to see if i can fix it myself.
I have tried to flash it with I9000UGKC1 without any PIT file and repartition unticked and odin had completed it successfully but the phone just cycles back into the boot screen.
Ive tried flashing it again with the same firmware and a 512 PIT file with repartition ticked and unticked but its always the same result.
Is there anything I am doing wrong or are there any other suggestions?
p.s I have rooted the phone and applied a lagfix.
Thanks in advance.
Rule one before flashing UNDO LAGFIX lagfix F**** your install .
jje
Hi dude,
Try flashing with the ODIN included.
Hopefully, it will fix your problem
P.S. if nothing works try flashing Darky's resurrection edition
http://forum.xda-developers.com/showthread.php?t=940671&highlight=[ODIN+ROM]
Good luck!
Thanks for the replies guys.
jje, i would disable it now but since it's bricked i dont think i can. Also i cant get into recovery mode. Im only getting into download mode because i bought myself a jig the last time this happened.
Nitro, i dont know what you mean by "ODIN included" ive been using odin to flash it.
What is Darky's by the way? Is it a custom ROM?
darkys is a custom rom... and Im pretty sure he meant he had attached odin for you.
Maybe try flashing JL2 with 512 and part checked..? does odin flash without an issue? and do you get any errors when trying to enter recovery?
Oh okay... well i was using odin 1.7 anyway
odin flashes without an issue and i cant get into recover because my phone is one of the unfortunate ones without 3BR.
I'll try flash it again as you said but if it doesnt work ill just go ahead and send it in to get fixed.
there are phones with no 3BR? I thought it was only 3 button download??? So odin flashed without any issues and you still cannot boot?
What firmware are you flashing?
Try JL2/KC1 maybe try a gb like JVO
usually the phones can't get into either.
i had to buy a jig to get into download mode.
ive tried KC1, JL2 and some others for android 2.1 and the same keeps happening. Odin flashes fine but the phone never boots
I'm just going to send it in to get fixed. I was just seeing if it was me doing something wrong or its just the phone and well it seems like its the phone.
Thanks for your help
if you can hit download mode you should be able to flash it, does adb work for you to get into recovery i think it's something like
adb reboot recovery.....not sure on that though, anyways, try flashing a new kernel, go to the dev section and flash hardcore speedmod then flash the rom again, at this point I dont think it matters so I would try using a 512 pit and tick repartition......just me though, i'd be trying everything before I sent it away