when i press HOME and POWER together the g1 splash screen comes up but then it just restarts
before this the g1 worked fine UNTILL i flashed back to STOCKED ROM and tried ROOTING it again.
im at the step where u have to HARD SPL it.
PLEASE HELP ME i can only go onto bootloader mode (camera+power)
i need to know asap
bstylz911 said:
when i press HOME and POWER together the g1 splash screen comes up but then it just restarts
before this the g1 worked fine UNTILL i flashed back to STOCKED ROM and tried ROOTING it again.
im at the step where u have to HARD SPL it.
PLEASE HELP ME i can only go onto bootloader mode (camera+power)
i need to know asap
Click to expand...
Click to collapse
Have you flashed the SPL?? If so some of the SPLs actually wipe out the phone so it's left "romless" Use an SD card reader to put a ROM on the then flash again....
But after reading your post again it seems like you cant get to recovery. If that's the case then the only thing that we can do is use fastboot to get the recovery img back. When you get to your SPL is it the Rainbow screen or is it androids skateboarding? If it's the Rainbow screen you may have hit a massive roadblock. If it's the skateboarding you're in luck. Now you do have to have ADB/Fastboot configured on your PC (Click Here to find out how)put a recovery image (named recovery.img) in the C:\[whatever you extracted the ADB stuff to]\tools and then using Command Prompt:
Code:
fastboot erase recovery
fastboot flash recovery recovery.img
What this does is erase your current recovery and then reloads your new recovery. If you continue to have issues you could always go back to stock, reroot and see if you're running into the same problems. (This part I think is easier)
So I followed all the rooting steps did the radio first and all that jazz then chose a rom, Got it loaded up on my g1 but when I reboot it just hangs at the t-mobile g1 screen for.....well, Ever. Help? Please and thank you.
turn off phone
hold home and power, you should be at the recovery menu. wipe and flash a new ROM
if you fail to get this screen, turn off, hold camera and power. you should see 3 skating androids, tell us which radio and SPL you are using
if you fail to get this screen also, i'm guessing you flashed haykuro's SPL before upgrading the radio, and have a very fasionable paperweight
hey guys sorry I did the dumbest thing possible.. i flashed an EBI0 Radio onto a EBI1 Device.. HELP!!!!! the wiki says its fixable if you know how, i would really appreciate it if someone would tell me how. i cannot boot into anything. no recovery.
0
Kipper321 said:
hey guys sorry I did the dumbest thing possible.. i flashed an EBI0 Radio onto a EBI1 Device.. HELP!!!!! the wiki says its fixable if you know how, i would really appreciate it if someone would tell me how. i cannot boot into anything. no recovery.
0
Click to expand...
Click to collapse
Can you still boot into fastboot ? (remove battery if needed to power off, put it back , hold back button and press power )
no i cant. i cannot boot into any menus.
you cant boot into fastboot or into recovery?
sorry man..... brick. at least as far as i could think.
the wiki says theres a way to fix it, does anyone know who wrote it? maybe i could contact them?
Seriously? So you can't access adb/fastboot shells from your computer?
Fastboot is not a menu you access, You need to have the android-sdk setup on your computer, and need to reboot your phone into fastboot:
Take out the battery.
Put battery back in.
Hold the Back Button
Press power button and continue to hold back button.
Device should boot into bootloader, and if you have the right spl fastboot will be enabled.. (i believe thats correct)
Also, did you flash the wrong radio and then continue to flash spl?
If so, your device is bricked. But if you only flashed the radio and it's compatible with your spl you should be ok.
dude, send me your phone, im a professional repair man , i'll even fix it for free XD
The fix way of doing it you may find hard lol but it's called JTAG ^^ read on cyanogenmod wiki
where would i have to send it out too? and some type of insurance would be nice but id possibly be willing to send it out
aBsolutex3 said:
dude, send me your phone, im a professional repair man , i'll even fix it for free XD
Click to expand...
Click to collapse
thatd be great pm me?
bl4cklabel said:
Fastboot is not a menu you access, You need to have the android-sdk setup on your computer, and need to reboot your phone into fastboot:
Take out the battery.
Put battery back in.
Hold the Back Button
Press power button and continue to hold back button.
Device should boot into bootloader, and if you have the right spl fastboot will be enabled.. (i believe thats correct)
Also, did you flash the wrong radio and then continue to flash spl?
If so, your device is bricked. But if you only flashed the radio and it's compatible with your spl you should be ok.
Click to expand...
Click to collapse
I only flashed the radio, and then the CM6 Rom
The radio i flashed was the g1-radio-2_22_23_02 but i flashed it on EBI1 not EBI0
i tried to boot with every key combination i can think of such as camera + power Volume + power Back + Power
EVERYTHING
but it always hangs at the rogers screen
Kipper321 said:
i tried to boot with every key combination i can think of such as camera + power Volume + power Back + Power
EVERYTHING
but it always hangs at the rogers screen
Click to expand...
Click to collapse
Why are you holding down all those keys ._.
hold camera while booting and give us a definitive answer on whether or not it loads a screen.
It does not work.
it stays at the rogers screen
Hey guys,
I am able to get into recovery (anon RA) but the camera down button + power is not working for going into fastboot screen so I can find out which Radio and SPL is on there.
When I wipe and try to install a ROM it gets stuck on the T-mobile G1 screen. Is the phone bricked? Any way to fix it?
Thanks.
aybe said:
Hey guys,
I am able to get into recovery (anon RA) but the camera down button + power is not working for going into fastboot screen so I can find out which Radio and SPL is on there.
When I wipe and try to install a ROM it gets stuck on the T-mobile G1 screen. Is the phone bricked? Any way to fix it?
Thanks.
Click to expand...
Click to collapse
try power on using (back+power)
Thanks. That worked.
hi guys,
yesterday i unlocked my bootloader flashed recovery (cwm 6.0.4.6) and a new rom. Slimkat 3.0 Stable.
today i made a nand and tried to flash new kernel (kozmikkernel) via adb (adb flash boot boot.img, i think this is the right way for s-on devices?)
but now my phone is stuck at bootloop, when i press the power button the other buttons startin to blink, bute nothing happens, the screen still stays black. what can i do to restore my nand backup?
hboot 1.56
s-on
m7ul
br
no ideas?
mookoe said:
no ideas?
Click to expand...
Click to collapse
I think you have to flash kernel thru fastboot so command is
fastboot flash boot boot.img
That should get it working since I don't believe you flash the kernel thru adb ...do it thru fast boot let me know I'd it helps
Sent from my One using XDA Premium 4 mobile app
I am sorry, but it says very clearly in the instructions of that kernel thread how to flash. Before doing anything, please familiarise yourself properly, and read read read....
Sent from my HTC One
mookoe said:
hi guys,
yesterday i unlocked my bootloader flashed recovery (cwm 6.0.4.6) and a new rom. Slimkat 3.0 Stable.
today i made a nand and tried to flash new kernel (kozmikkernel) via adb (adb flash boot boot.img, i think this is the right way for s-on devices?)
but now my phone is stuck at bootloop, when i press the power button the other buttons startin to blink, bute nothing happens, the screen still stays black. what can i do to restore my nand backup?
hboot 1.56
s-on
m7ul
br
Click to expand...
Click to collapse
put ur phone in charge about a1h then disconect charge , press volume down about 10 second then press power button 10 second then release power button and keep pressing volume down , now you can see ur bootloader and u follow me :
1- flash a new recovery i prefer twrp .
2-enter to recovery and mount ur usb storage ,if you get error cant mount ...etc , dont worry ,you can use adb sideload or "adb push zip "name of rom".zip wait about 3 or 5 min and you and u will find ur rom in ur storage , then flash ur rom and voila