Running into issues while trying to install phiremod. Went into the recovery menu, followed instructions completely, it installed fine, rebooted device and it looped me back to recovery menu (CWR wasn't burned to SD, it was installed to the Nook). A few posts recommended that I format boot too, and now instead of having the recovery menu loop, I am stuck with a unit that doesn't power on. Help!
Same problem here. Followed the instructions to the letter, and now the Nook keeps booting to the ClockworkMod Recovery screen...even with the SD-card removed.
Is it that we were supposed to do something else to the Nook before attempting the install?
By the way, I used Clockwork Recovery v3.0.0.5 from the SD-card while installing.
swordsaint said:
Same problem here. Followed the instructions to the letter, and now the Nook keeps booting to the ClockworkMod Recovery screen...even with the SD-card removed.
Is it that we were supposed to do something else to the Nook before attempting the install?
By the way, I used Clockwork Recovery v3.0.0.5 from the SD-card while installing.
Click to expand...
Click to collapse
May try wiping cache and dalvik cache if you haven't tried that already.
OK, n00b question: what's a 'dalvik' cache?
[NQUOTE=swordsaint;11459824]OK, n00b question: what's a 'dalvik' cache?[/QUOTE]
When you are in recovery, you have the option to wipe cache on the first screen. On the advanced screen you have the option to wipe dalvik cache. I am not totally sure, but I believe it is cache that is directly related to your apps. The other is more general in nature. Wipe both.
Also WTF. USB storage wont mount in Phiremod. What kind of **** is that?
OK, guys...I finally fixed it.
1st, I used the CWR Removal tool from this thread, and then went through
the installation steps carefully again, but after the install was completed,
I removed the SD-card, THEN rebooted.
Problem solved. (Didn't need to mess with the caches though)
Happily playing Angry Birds just now just for the heck of it.
Is there any way to access the Nook's internal storage to put music,
movie files, etc?
Related
Can someone please explain to me the proper steps from point A to point B?
What I did was used an auto-nootered 1.01 B&N Stock rom, i downloaded an EXT-4 compatable CWR (updated it to 3.0.1 also) and then flashed CM7 (formatting system, cache) and I'm stuck in a boot loop...
I had CM7 working awesome the other day, but I guess it didn't support busybox when I installed it because then my nook stopped booting/freezing after a boot.
Can someone just create a real simple flow-chart of what I have to do? Thanks
Oh and I want to install it to the eMMC as well, although I have a class 6 sdcard I'd just much rather know its sitting on my internal and as fast as possible
Al2x,
This is what I did on my NC.
Downloaded the BOOT Only from this thread " http://forum.xda-developers.com/showthread.php?t=914690 "
http://www.etoile-laconnex.com/CWR-removal.zip
Downloaded CM7 RC4.
Boot to CWM 3.0.1.0, format Boot, System, Data and Cache.
Turn off the NC, boot to CWM 3.0.1.0 again, flash the BOOT file, then flash with CM7 RC4. I also did downloaded the GAPPS and flash that as well.
Reboot, back in the game.
Hope that would help.
Slu3
that seems pretty logical. what I just did was basically nootered stock 1.01 and then downloaded EXT4 bootable CWR 3.0.1.0 and formatted system, data, cache, battery stats & dalvik, and didn't touch boot.
It boots up into CM7 just fine, the only thing I've noticed is that I guess not formatting boot leaves the "power of reading" B&N boot screen up, which I don't mind at all, I used to have a nasty pixelated "LOADING" splash come up. Anyways, thanks for the help, I think I might be fine (knocks on wood)
Does anyone have any advice? My system was very stable, then I upgraded my uboot and flashed the 3.1 beta. The beta performed terribly, so I flashed back to the build in the title, and now all these force closes. I did install Pure Messenger and Pulse in the meantime and put up some widgets.
I'm planning to try out Phiremod on eMMC and see how that works out, but if there's a fix for this issue, I'd like to try it out. I have CWM on eMMC, but I'm thinking if I clear caches in there, it will be the caches in my stock OS install on eMMC, correct? Can I point it to the SD install?
Taosaur said:
Does anyone have any advice? My system was very stable, then I upgraded my uboot and flashed the 3.1 beta. The beta performed terribly, so I flashed back to the build in the title, and now all these force closes. I did install Pure Messenger and Pulse in the meantime and put up some widgets.
I'm planning to try out Phiremod on eMMC and see how that works out, but if there's a fix for this issue, I'd like to try it out. I have CWM on eMMC, but I'm thinking if I clear caches in there, it will be the caches in my stock OS install on eMMC, correct? Can I point it to the SD install?
Click to expand...
Click to collapse
Boot into Clockwork. Under Mounts / Storage wipe cache, then go into "advanced" and wipe dalvik cache (will cause your device to lock & need hard reboot). Then boot your machine as normal. Load time will be a little on the long side because your Nook will be rebuilding cache...perfectly normal. This has to be done when going back to the stables from the Beta CM7.
hockeyfamily737 said:
Boot into Clockwork. Under Mounts / Storage wipe cache, then go into "advanced" and wipe dalvik cache (will cause your device to lock & need hard reboot). Then boot your machine as normal. Load time will be a little on the long side because your Nook will be rebuilding cache...perfectly normal. This has to be done when going back to the stables from the Beta CM7.
Click to expand...
Click to collapse
But again, with CWM on eMMC and CM7 on SD, won't that wipe the caches for the stock install on eMMC rather than for CM7?
That method did not work, btw, I'm guessing because it wasn't wiping the caches for the ROM on the card. Any way to do this for a verygreen SD install?
Taosaur said:
That method did not work, btw, I'm guessing because it wasn't wiping the caches for the ROM on the card. Any way to do this for a verygreen SD install?
Click to expand...
Click to collapse
In terminal emulator, su then rm /data/dalvik-cache/*
Just go to settings, applications, manage application, in the all tab, find "media storage" if I remembered correctly, then go in and clear data, reboot then you should be fine.
robot8 said:
In terminal emulator, su then rm /data/dalvik-cache/*
Click to expand...
Click to collapse
Hope I'm not counting my chickens before they hatch, but it looks like that did it--thank you!
knaries2000 said:
Just go to settings, applications, manage application, in the all tab, find "media storage" if I remembered correctly, then go in and clear data, reboot then you should be fine.
Click to expand...
Click to collapse
So far, this did the trick for me! Thank you!
I'm using a CM9 rom on my nook color and I wanted to go back to stock, so I created a cwr sd card. I can boot into recovery, so I format data/system/cache/dalvik and load nookcolor_1_4_1_update-signed.zip, then reboot the nook, it booted up to the Nook Color screen, then would do some weird boot loop is what I'm thinking I was getting. So I tried again, format everything, install the image .After rebooting it looks like its going to work, but then it hangs at the gray n screen. So I used a new sd card and a different cwr image and redid everything, same problem. So I went back to CM9 and it works fine, but why can't I go back to stock? I've read tutorials all over this place and even a few different ones from other websites. I'm following the instructions exactly.
jimmylee7706 said:
I'm using a CM9 rom on my nook color and I wanted to go back to stock, so I created a cwr sd card. I can boot into recovery, so I format data/system/cache/dalvik and load nookcolor_1_4_1_update-signed.zip, then reboot the nook, it booted up to the Nook Color screen, then would do some weird boot loop is what I'm thinking I was getting. So I tried again, format everything, install the image .After rebooting it looks like its going to work, but then it hangs at the gray n screen. So I used a new sd card and a different cwr image and redid everything, same problem. So I went back to CM9 and it works fine, but why can't I go back to stock? I've read tutorials all over this place and even a few different ones from other websites. I'm following the instructions exactly.
Click to expand...
Click to collapse
I had the same exact problem when I was experimenting that process for my tips thread. For some reason, CWM is not clearing the partitions with the wipe commands like it should. The only way I could get it to work properly was to use my partition format zip to format them. You can get that zip at my tips thread linked in my signature. That zip version (5-6-7) formats /system, /data and /cache. That thread also has a link to my 1.4.3 stock zip.
thanks!
leapinlar said:
I had the same exact problem when I was experimenting that process for my tips thread. For some reason, CWM is not clearing the partitions with the wipe commands like it should. The only way I could get it to work properly was to use my partition format zip to format them. You can get that zip at my tips thread linked in my signature. That zip version (5-6-7) formats /system, /data and /cache. That thread also has a link to my 1.4.3 stock zip.
Click to expand...
Click to collapse
That did that trick ! Thanks so much. I just ran the 5-6-7 zip, and then installed 1.4.1, and was back to stock, updating now.
Hi all, this is my first post on XDA. I'm having big troubles with my device, a Samsung Galaxy S Plus i 9001 and I'm looking for some advice.
After a clean installation of the rom i had been using for some time I started to get messages of force close for most of the apps installed at every boot. The ROM in question is SmoothieICS v2. I believe that the reason of this issue is the fact that I restored all the apps and the data with Titanium backup. To solve the problem I tried to restore a nandroid backup via CWM (version 6.0.1.0), but when a rebooted, the backup was not installed at all and the force close messages continued. After that I tried to wipe data and cache, reinstall the ROM via CWM and Odin, install the stock ROM, fix permissions, format the partition, but nothing worked. Every time I reboot the device, the old ROM boot up with the same force close messages.
I've read several posts on XDA with similar issues, but usually a clean reinstall worked fine. At the moment I'm out of option.
Find attache a copy of the logcat recorded after rebooting the device.
Any suggestion to save my phone is really appreciated.
Thnaks in advance.
Some tips here:
1: Flash BroodROM RC5 (this is an Gingerbread ROM with all the partitions of our device) via odin
2: flash CWM 5.5.0.4 (this is in my eyes the most stable recovery) and wipe all (system, data, cache,dalvic etc)
ibacco said:
Hi all, this is my first post on XDA. I'm having big troubles with my device, a Samsung Galaxy S Plus i 9001 and I'm looking for some advice.
After a clean installation of the rom i had been using for some time I started to get messages of force close for most of the apps installed at every boot. The ROM in question is SmoothieICS v2. I believe that the reason of this issue is the fact that I restored all the apps and the data with Titanium backup. To solve the problem I tried to restore a nandroid backup via CWM (version 6.0.1.0), but when a rebooted, the backup was not installed at all and the force close messages continued. After that I tried to wipe data and cache, reinstall the ROM via CWM and Odin, install the stock ROM, fix permissions, format the partition, but nothing worked. Every time I reboot the device, the old ROM boot up with the same force close messages.
I've read several posts on XDA with similar issues, but usually a clean reinstall worked fine. At the moment I'm out of option.
Find attache a copy of the logcat recorded after rebooting the device.
Any suggestion to save my phone is really appreciated.
Thnaks in advance.
Click to expand...
Click to collapse
First solution,
SmoothieICS is an outdated ROM. Currently there are more stable and bug free releases are available for our device. You can try that.
But, the choice is yours, if you want to continue with it,
Access download mode, install a stable and safe recoveries like CWM 5.5.04, TWRP 2.2.1, or CWM 6.0.3.2 via odin or you can try to flash it via current recovery.
Then do a full data wipe, wipe cache, wipe dalvic cache. If necessary, delete the partition and do a full format
Restore the nandroid backup or do a fresh install
Edit: @mrjraider Haven't seen your reply. Silly me, repeated the same thing you said..
jabrif said:
First solution,
SmoothieICS is an outdated ROM. Currently there are more stable and bug free releases are available for our device. You can try that.
But, the choice is yours, if you want to continue with it,
Access download mode, install a stable and safe recoveries like CWM 5.5.04, TWRP 2.2.1, or CWM 6.0.3.2 via odin or you can try to flash it via current recovery.
Then do a full data wipe, wipe cache, wipe dalvic cache. If necessary, delete the partition and do a full format
Restore the nandroid backup or do a fresh install
Edit: @mrjraider Haven't seen your reply. Silly me, repeated the same thing you said..
Click to expand...
Click to collapse
No problem mate
Things happen
Thank you both, but your solutions didn't work. After installing BroodROM via Odin my phone rebooted in SmoothieICS just like nothing happened. Also a new recovery can't be installed, Tried with TWRP and CWM with no luck :crying:
ibacco said:
Thank you both, but your solutions didn't work. After installing BroodROM via Odin my phone rebooted in SmoothieICS just like nothing happened. Also a new recovery can't be installed, Tried with TWRP and CWM with no luck :crying:
Click to expand...
Click to collapse
That's strange. How is it possible to show up again after deleting and formatting the partition completely.. Are you sure you formatted the data and system in mounts and storage menu of cwm recovery.?
Anyway, Remove your external sd card, and try all the methods again..
Tried again. Did the following:
- removed the external sd card
- rebooted in recovery
- format system and data
- installed CWM 5.5.0.4
- rebooted in recovery
The recovery version installed is still the 6.0.1.0!!!!
It is like the internal SD card can't be written any more.
One thing I maybe didn't mention is that if I delete a file in the internal SD card and the reboot, the file is still there. it is not deleted.
This is really frustrating.
ibacco said:
Tried again. Did the following:
- removed the external sd card
- rebooted in recovery
- format system and data
- installed CWM 5.5.0.4
- rebooted in recovery
The recovery version installed is still the 6.0.1.0!!!!
It is like the internal SD card can't be written any more.
One thing I maybe didn't mention is that if I delete a file in the internal SD card and the reboot, the file is still there. it is not deleted.
This is really frustrating.
Click to expand...
Click to collapse
That's strange and weird. Haven't heard about such a problem before. I will look in to it and will reply you if i get something..
ibacco said:
Tried again. Did the following:
- removed the external sd card
- rebooted in recovery
- format system and data
- installed CWM 5.5.0.4
- rebooted in recovery
The recovery version installed is still the 6.0.1.0!!!!
It is like the internal SD card can't be written any more.
One thing I maybe didn't mention is that if I delete a file in the internal SD card and the reboot, the file is still there. it is not deleted.
This is really frustrating.
Click to expand...
Click to collapse
I recognize those symptoms. The i/o of the sdcard is defect.
What happens is that when you want to format random 0 and 1 are being written to remove the data on the card. If your card is broken and cant be written to you will be unable to format or flash anything. And thus the data on the card remains.
Verstuurd van mijn GT-I9001 met Tapatalk
mrjraider said:
I recognize those symptoms. The i/o of the sdcard is defect.
What happens is that when you want to format random 0 and 1 are being written to remove the data on the card. If your card is broken and cant be written to you will be unable to format or flash anything. And thus the data on the card remains.
Verstuurd van mijn GT-I9001 met Tapatalk
Click to expand...
Click to collapse
Does this mean that the only way to solve the issue is to replace the internal SD card?
Same Issue, but with SGS GT-I9000
I have pretty much the same problem!
Ive been reading a lot and it really seems to be a problem of the internal SD card!
I tried many times to delete all the files on the internal SD card via USB and via Recovery Mode, installed different OS ...nothing worked and most of my apps crash the whole time, so force close to all!
Im now about to decide to use my external SD as internal!
What do you say?
Any ideas
Thanks
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Venrun said:
I got nook hd+ and used cm version 10.2 something for a while.
The device keeps crashing and restarting like crazy.
1 out of 10 times, it launches, but before I do anything, it crashes. Hell.
It has been crashing and restarting quite often these days, but since last night, all it does is crashing and restarting.
To make matters worse, I tried to format the device and install cm again. It did not work.
I made booting SD card and chose 'wipe data/ factory reset'. And nook said it wiped /data /cache data wipe complete etc. However, files were still there in internal storage.
On top of that, I had to try 4 times to install newest cm-11. It aborted.
Next, I tried to installnookjdplus factory2.2.0 . It had error. (status 6) to ne specific.
So, I tried newest cwm recovery. It installed, but nook still crashed.
I persevered and tried to install cm 11. It installed, but still crash and restart.
Hell. I literally spent whole day doing this. I am confused and frustrated and angry and experiencing a few other negative emotions English language dows not have in words.
Please, some advice.
Click to expand...
Click to collapse
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Ok. At least I got my biggest problem now.
I think my roblem is wipe data/factory reset does not do job it is supposed to do.
I still see folders and files in internal memory after factory reset. I think that is why install aborts and crashes even after successful install.
I think my problem is that wipe data/factory reset does not do its job
It gives me message it is formatting data cache and stuff. And last day they gave me data wipe complete. But the problem is, in internal memory, I can still see old folders and old files.
I think he should be gone if it is formatted. Where do I get the meaning of factory reset wrong?
Its not what is wrong with me. And how can I make factory reset work
And second question is that I tried to install B&N original operating system from cwm-based recovery. I tried a few different versions of
nookHDplus-factory-2.1.1-plain-stock.zip
However it always fail to install. Install aborted for some reason.
Thanks. It seem helpful.
digixmax said:
CM10.x, CM11, and stock ROM need different versions of CWM recovery.
See http://forum.xda-developers.com/showthread.php?t=2679899 for info/pointers on flashing CM11.
To go back to stock ROM, see http://forum.xda-developers.com/showthread.php?t=2062613(item #6).
When switching between CM10, CM11, and stock ROM, you need to do "wipe /data & factory reset".
If none of the above helps the your problem might be due to an unruly app or hardware related.
Click to expand...
Click to collapse
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Venrun said:
Thanks a lot for your advice
Going back to stock Rom 6 explains error message and aborting of install.
However the problem is where do I get CWM V 60036 or eariler?
Googling does not work.9
Click to expand...
Click to collapse
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
thanks
leapinlar said:
You can get v6036 on that same thread digimax referenced above (my CWM thread linked in my signature). And a data wipe does not wipe your media files. To do that, go to mounts and storage and select wipe "data and datamedia".
Sent from my SM-T707V using XDA Premium HD app
Click to expand...
Click to collapse
trying it. hope it works.
did not work
for about deleting internal data, I went to 'mounts and storage'. used 'format /sdcard' and 'format/ data and/ data/media (/sdcard), but still has stuff in internal memory.
and to my surprise , I have been using CWM-6028. so far. I thought its name was 'NookHDplus-bootable'.
hell. stupid me.
Anyhow, CWM-6028 has been giving me troule
so, I would try other versions.
So far, I have done
1. made boot sd by burning image.
2. copy 'NookHDplus-factory-2.1.0-plain-stock' files and other versions.
3. Insert SD in device and boot CWM.
4. choose zip from sdcard.
5. install factory plain stock.
then I get message 'Failed to retouch 'system/lib/libemoji.so' (WTF is libemoji? and it is always this same file.)
E: error in sdard/nookHDplus-factort-2.2.1-plain-stock.zip(status7)
Installation aborted.
hell. And I tried every factory zip.
Am I doing something wrong?
Failed tp retouch '/system/lib/libemoji' is error message I get
Everytime I tried to install factory stock.
I tried every version of stock files. And I tried all CWM. And even tried TWRP, but it is always the same message what the hell is that emoji?
And what can I do with it?
What frustrates me the most is the fact that it installed 99% in a minute without trouble and stays there 410 minutes until it fails to install. It's driving me crazy
Does CM makes Factory reset by power button and home button does not work either.
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
It is possible you have a bricked emmc. When bricked it looks like it is writing but is really read only and nothing takes. If you still have media files after a successful format data and datamedia then it is bricked. Probably best to get rid of it. You can buy a refurbished unit very cheaply these days.
Sent from my SM-T707V using XDA Premium HD app
Venrun said:
Because I am getting message factory reset failed.
If CM is not the reason for it, well, something is wrong. Very wrong.
I am suspecting Internal memory corrupted lr something.
I should seriously consider throwing it away now.
Click to expand...
Click to collapse
Assuming that your EMMC is shot, you can try running off SD card this no-emmc version of CM11 ROM: https://iamafanof.wordpress.com/201...-4-4-4-for-bricked-no-emmc-nook-hd-04nov2014/. It's best to use a card with fast randomized block read/write (which is what Class 4 cards are typically best at).
Thanks guys. By the way, what is emmc?
Is it part of CM software?
Does not sounds like hardware.
If I had factory resetted a day earlier, I would not have had problems.
Well. That is the way it is.
I finally kind of got nook working. I am running it on SD card now.
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
digixmax said:
Right after burning the ROM image to SDcard, it should be possible to use a disk partitioning tool such as MiniTool Partition Wizard to examine the SDcard ROM image's partitions and resize the /data partition to fill up the un-allocated space.
Click to expand...
Click to collapse
Thanks a lot. That sounds I can do it.
how you did it
Venrun said:
I got to thank you guys for your good advices.
Problem is that this ecmm free booting shrinks storage space.
No matter what is size of SD card, Internal storage is 900mb and SD card got 100mb. (I mean virtual Internal storage the file made in SD card) Not enough space to hold a movie.
I am happier to have tab working, but also wish to use full space of my SD.
At least I wish I can have a few Gs of storage.
Click to expand...
Click to collapse
Please tell how you made SD card work.
thanks.
rkgarg2000 said:
Please tell how you made SD card work.
thanks.
Click to expand...
Click to collapse
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Please confirm if my problem has any other solution
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting. Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
thanks.
digixmax said:
See http://forum.xda-developers.com/showpost.php?p=49007593&postcount=84 for some pointers on how to create a CM SD card with customized partition sizing for HD+. Although it was written for CM11, you should be able to adapt it for CM10.2 by using the appropriate ROM and GApps zip files corresponding to CM10.2.
Click to expand...
Click to collapse
rkgarg2000 said:
my NOOK HD+ I have CMW 10.2.1 with 6.0.4.6 recovery. Nook went to loop while booting.
Click to expand...
Click to collapse
Does it boot-loop to recovery?
If so, see http://forum.xda-developers.com/showpost.php?p=55582281&postcount=1459 for potential causes and solutions.
Now I can go to recovery and able to boot SD recovery CMW 6.0.2.8. But issue is:-
1. For any update even for Stock ROM it gives status 7 error.
2. With system recovery 6.0.4.6 when I try factory reset the TAB reboot same happen when i try to format DATA. While factory reset and DATA format happens with 6.0.2.8 position remains same.
3. When I try to make backup on internal storage both with 6.0.4.6 (TAB recovery) or 6.0.2.8 (From SD card) it makes boot,recovery and system image but give error as failed to backup /DATA.
4. I have done every thing right from various and latest ROM's ( error Status 7), Formatting boot,system but 6.0.4.6 on NOOK is intact and is in loop.
Please tell How I can over come this STATUS 7 error or DATA backup error.
...
Click to expand...
Click to collapse
CWM v6.0.4.6 is not compatible with CM10.x, you need to flash back to the CWM version you previously used.