I have rooted my phone using the Onclick rooting software, that seems to have been a success.
However, I tried using teh OCLF from market to lagfix it but nothing seem to have happened in the 30mins I let it do its thing. THe progress bar goes full then start again, and does this repeatedly. And after reading around some people say that's now out dated and other lag fixes should be more suitable
So, now that my Samsung G S is rooted, what options for lagfixes do I have?
Hi, im asking the same questions
Hi, i am in uk running stock froyo 2.2, I have rooted my phone using Z4root, but I want to put a lagfix on, I have read that OCLF isnt very good anymore, and voodoo you have to install a new rom and im not brave enough to do anything like that so which is the best lagfix i can use and i have heard about overclocking what does that mean? thanks in advance
can anyone help us please
TheSippler said:
So, now that my Samsung G S is rooted, what options for lagfixes do I have?
Click to expand...
Click to collapse
Besides the fact I dont know whats a Samsung G S and no idea what your ROM version is you could do what I did. But depends on your ROM and SGS version!!!
But its on all your risk. Read manuals and warnings to the kernel and the app. You have been warned (I have done this on 2 SGS mine and my friends till now , he has 2.2 stock rom and I 2.2.1 stock JPY too)
Took the neldar kernel flasher , backed up my stock kernel.
Then flashed the speedmod CWM version with the kernel flasher, kernel you can find in the speedmod kernel thread.
Applied the tweaks and lagfixes (ext4) from the recovery. done
and that was it. btw when you do this, try to run the rom WITHOUT the lagfixes, just with the new kernel so you can easily get back to your stock. If you want more, then go to the recovery ULK options and do the recommended tweaks from there. If you still need it, then apply the lagfixes (always backup and always on your own risk)
kezgez said:
and voodoo you have to install a new rom and im not brave enough to do anything like that so which is the best lagfix i can use and i have heard about overclocking what does that mean? thanks in advance
can anyone help us please
Click to expand...
Click to collapse
Not sure you have to install another rom, but I do not know the the original voodoo kernel . Maybe you could try with the one I suggested up there.Btw there is more kernels to choose from, depends on your Galaxy Version and ROM.
Overclocking is nothing you should be concerned with yet I think there is a pretty big speed jump from stock to custom kernel, then from custom tweaks and also to lagfixes. If you are not satisfied then you can try that. OC should make the phone faster. In my opinion though the 1GHz is enough for the phone. With OC come some risks (heat, battery usage, stability)
Last night I managed to get the OCLF working on the phone and noticed improvements. Now that I have a lagfix working, will OCLF be alright to leave on there? Or do you still recommend going to somethign else? (I didn't quite understand why OCLF is being considered out dated anyway).
Install the new version (2.2.1) and lagfix is of no need anymore.
Completely satisfied with a smooth running Galaxy now.
TheSippler said:
Last night I managed to get the OCLF working on the phone and noticed improvements. Now that I have a lagfix working, will OCLF be alright to leave on there? Or do you still recommend going to somethign else? (I didn't quite understand why OCLF is being considered out dated anyway).
Click to expand...
Click to collapse
Well keep the lagfix you have now. If you wanted try something else you would have to undo the changes you have done till now. If it works and you like it keep it..
To plexat: yes the 2.2.1 it's sufficient in speed.
In my case though I had to do already 2 factory reset once cuz the phone didn't start at all and in time even the 2.2.1 became slow. I installed the custom kernel though just for the sharpness fix but was surprised with the lower battery usage and speed. There is still a big speed jump from stock to custom
Sent from my GT-I9000 using XDA App
thankyou for your help, ive got the kernal flasher and kernal thread but can you just confirm for me what I have to do with the kernal thread sorry but ive not done this before and really dont want to damage my phone thanks again Karen
kezgez said:
thankyou for your help, ive got the kernal flasher and kernal thread but can you just confirm for me what I have to do with the kernal thread sorry but ive not done this before and really dont want to damage my phone thanks again Karen
Click to expand...
Click to collapse
Ok man, first of all. You have stock 2.2 but which phone exactly?
In the kernel thread, is written for which phones it is and also for which ROM.
So if it fits yours. You can try what I wrote you somewhere up. Backup, flash the CWM version etc.
First make sure though if you have the correct kernel for your ROM and phone. AND you shouldn't have any other type lagfixes applied.
Thats kinda all. What you can do if you have root, without any trouble, is backup your kernel with the app. Then verify if other things fit. And you can try to flash a custom kernel.
EDIT: Why are you still on 2.2? I mean UK had as one of the first 2.2.1 and plexat is right. 2.2.1 is faster and smoother as 2.2 ? If you dont have any lagfixes or other custom things applied you should kinda update to 2.2.1
Hi Pagot, I checked I had the right kernel and stuff and YIPPEE ive done it, my heart was in my mouth but i took the plunge and it now says i have the kernel above, it does seem more responsive and quicker although the benchmark still says the same? the reason I have still got 2.2 is because I have a branded o2 phone and they havent released it yet for branded phones and i am scared to try and flash it to 2.2.1 is there anything i can now do to speed it up anymore ie lag fixes and things thanks for your help
Glad it worked for you
Well not sure about upgrading the rom with a custom kernel. Am new at this too . So dont flash a rom yet.
From what I asked in the speedmod kernel thread. It should be safe to put back the stock backup kernel you made with the app and then to update if its out. Thats just for 2.2.1 upgrade for you in the future. The condition is however no lagfixes applied!!! If you have them applied it can and will probably go bad on the update!!!
kezgez said:
does seem more responsive and quicker although the benchmark still says the same?
Click to expand...
Click to collapse
Ok please dont look at the score. Mine is actually worse as on the stock kernel if you are talking about quadrant. They are irrelevant.
If your phone feels right, leave it as it is
If you want to tweak it little more. Get to the recovery and there are some tweaks,should be still safe to make. They are marked as recommended in the ULK options.
I wouldn't suggest yet to apply a lagfix. Try it how it feels now. If it starts getting bad and laggy etc. Then experiment with that. I had a lagfix but reverted back, for me the speed is sufficient how it is now
Since you have now CWM you can even backup your whole phone.
If you dont know how to go to the recovery the 3 button combo. There are many nice tools in the market for that. I personally use SGS toolbox/tools, in it is a shorcut with reboot to recovery.
When you are there. the BACK button is actually like OK so beware of that!!! You navigate with the volume button UP/DOWN and confirm with home or back.
Thanks again, been in and enabled tweeks, just so as I no, I noticed in recovery there is a lagfix option is this where i go to apply this and if I do it how do I disable it if I want to
Also you said I could backup my phone now how do I do this Thanks again
Wow my phone is really speedy now thanks for all the help I've now flashed kernel tweaked and applied lagfix and all is well I've backed up my phone as well
YIPPIE
Sent from my GT-I9000 using XDA App
kezgez said:
Wow my phone is really speedy now thanks for all the help I've now flashed kernel tweaked and applied lagfix and all is well I've backed up my phone as well
YIPPIE
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ha seriously glad for you . One day you have no idea about anything, the next day you run a custom kernel with lagfixes and tweaks.
When you get to it, its kinda not so difficult. (It took me kinda a half year )
PAGOT said:
Ha seriously glad for you . One day you have no idea about anything, the next day you run a custom kernel with lagfixes and tweaks.
When you get to it, its kinda not so difficult. (It took me kinda a half year )
Click to expand...
Click to collapse
How true. Just in case get familiar with Odin. Having fun with flashing by CWM can sometimes result in being stuck. Knowing how to use Odin and having all necessary files on your computer should give you some sense of security.
Related
Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!
backdownup said:
but i'm really interested in flashing this rom (will be my first one)
Click to expand...
Click to collapse
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.
MikeyMike01 said:
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.
Click to expand...
Click to collapse
Agreed. Just to be save do alot of reading before attempting anything really lol. There are stickies in the Development section start there.
Ok so I did a little more reading. I896 and I897 are essentially the same. I'm not flashing a rom, just a kernel, so there should be no issue with the 3G problem mentioned in the wiki.
It won't change my rom or anything about the device other then how the filesystem works.
Thanks!
backdownup said:
Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!
Click to expand...
Click to collapse
Hi, I'm pretty new here too, and I have to tell you that know one will give you a straight answer. There's a lot of' tribal knowledge', and it seems that people would rather teach you how to unbrick your phone than to flash it without issue.
First of all, hook up to Samsung Kies and update your phone to Froyo. If you are on Rogers it's an official update, don't worry about flashing any other roms yet.
Next, Use the option in the OLCF to unlagfix.
Next, you will need to root your phone. OCLF is practically obsolete, as the developer does not update anymore. Your best bet is Superoneclick. Read all instructions first. It is very easy and effective.
After you have the phone rooted, you can now install Titanium Backup. This will save all of your apps, contact info, settings, virtually everything on the phone, it will save them to a folder on your external SD. drop and drag this folder to your desktop in case anything goes wrong. I never had a problem.
You should backup your kernel. I used Neldar's SGS Kernel Flasher. It will save your kernel as an 'update.zip' in your root folder. Drag this to your desktop and put it into a folder called 'i897 orig kernel' or what have you, in case something goes wrong. I never had a problem.
Now you can flash SpeedMod. The developer's website, which is linked to in the thread's first post, will walk you though it. You will first need to install ODIN. The SpeedMod developer has a step-by-step on how to flash SpeedMod using ODIN on the developer's page. Make sure you choose a Speedmod Kernel that is intended for the Captivate, not the I9000, and that you chose the one for ODIN, not the ClockWorkMod version. Follow the steps in the Developer's page.
When you have done that, reboot into recovery mode and you should see Green Text. From here you can enable the lagfix and other tweaks. use the volume keys to select the option you want and the power button to select. under the options, it will show you which tweaks you have enabled or disabled.
Remember to select the most stable SpeedMod release, the one that is posted in the Forum (K12U-T4) is a TEST VERSION, hence the 'T'. The latest stable version as of this writing was K12T, as posted in the developer's page. I have had great results with this one.
You may find that you don't need to flash a custom ROM, I have found this setup very satisfying.
Good Luck!
Wow,
Thank you so much clemmie! That's was succinct and very helpful, especially the part about the proper way to back up my stuff.
I uninstalled OCLF just now, and it seems my phone runs at the same speed (aka fast) as it did with the lag fix installed!
Going to flash this kernel tonight or tomorrow, I'll let you know how it goes.
Thanks again!
Good to hear. There would be a lot less smoke and mirrors if people would just be straightforward and post step by step instructions with links, to give people what they want. I hope what worked for me will work for you, and I encourage you to share what you learn as well.
Kernel flash done! Screen is initially very different looking thanks to the amoled mod. Success! Backed up, thanks for all the help.
hey clemmie,
i heard that there's some issues with voice quality due to the Speedmod kernel being initially i9000-based and that it's recommended to flash a i9000-based modem. Are you having any issues with using a stock i896 modem or do you recommend something else?
Yeah, that is true, but I haven't had any problems with the stock modem. The phone works as well in-call as any other I've owned. I wonder if there is a difference between the AT&T build vs. the Rogers build. It seems that it's the AT&T folks that have issues.
Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.
olwe said:
Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.
Click to expand...
Click to collapse
Are you on Rogers? Earlier versions of the SpeedMod kernel had the AT&T splash screen, but newer versions have a simple black screen similar to the stock Samsung boot logo.
Installing the SpeedMod kernel will not change the configuration, apps, or settings of your apps. There are some settings that you can tweak in recovery mode but they are mostly file system tweaks. You will however notice that screen resolution is sharper. Your phone will run smoother and more efficiently with better battery life. You can still flash any custom or stock ROM with SpeedMod or without SpeedMod.
Yes I am on Rogers. However, I can't seem to find the stable version K12T that you mentioned on your instructions from the developer's page.
If you click on the hotlinked 'SpeedMod' in my 'tutorial' post, it will take you to the XDA page dedicated to the SpeedMod revisions. Right now there is a 13A Test version posted, but the latest stable version is now K12U. If you click where it says 'more info and downloads', it will take you to the developer's(Hardcore) blog, 'Tourist In Paradise'. The revisions are listed there. I would bookmark this page and check back frequently, as Hardcore is constantly updating. However, I'll link you to the latest stable release for ODIN, K12U:
https://docs.google.com/uc?id=0B-3n...WJmNTUtZDVmNThmMmNhZTRm&export=download&hl=en
Thanks for that! I just did this and although it didn't show the ATT boot screen, it shows the Galaxy S I 897 screen after the I 896 though. Thanks again!
Glad to hear you had success. Not so hard after all, eh?
After using this for a day or two:
I can't believe how fast my phone is. I thought it was fast before with (and then without) the oclf. I can barely keep up!
Battery life seems improved.
Screen is perfect. The lowest brightness setting is much better and more comfortable for low light usage.
I lost 1000 points off quadrant, but quadrant doesn't matter.
The only real downside is call quality took a hit. It's a bit static-y and echo-y.
I'll look into this though and see if I can find a solution, but if you have any tips let me know.
Looks like you are a candidate for a modem flash. Let me know if you find something that works, there is a lot of info on swapping modems for SpeedMod. Maybe I'll try one too!
Hey clemmie (or anyone), if I want to install voodoo lagfix - how abouts would I do that if the SpeedMod kernel already comes with / is based on sztupy's Universal Lagfix (enhanced) and if voodoo is a kernel itself (unless I'm wrong about this)?
If you flash the SpeedMod kernel, voodoo lagfix comes integrated with the kernel. It's a master of enabling it from the recovery menu.
Sent from my SAMSUNG-SGH-I896 using XDA App
SO, earlier today Supercurio put together something special for those of us in Canada on the i896- a stock Rogers Froyo kernel with voodoo injected into it. Following logic, those of us on the stock Rogers Froyo should be able to have our cake and eat it too: a kernel modified especially from Froyo, intended for the Captivate, with voodoo lagfix but without the need to reflash an i9000modem or kernel. Here are the files:
Kernel: stock Rogers Froyo i896 w/ voodoo injection
Modem: Stock Rogers I896 UXJL1 Modem
Before trying a flash, I unlagfixed and backed up via Titanium Backup.
First I tried the kernel flash. I knew it wouldn't work with the modem, but I flashed it first to make sure there were no issues.
Rebooted into recovery- RED SCREEN
I did not enable the lagfix at this point. Just a straight reboot.
Regular boot screen; Rogers logo; Samsung Splash screen- then everything goes black. The home key buttons will light up and never go out if pressed. The phone stays like this until I pull the battery(I waited 25 min before I gave up).
I have tried various configurations regarding flash order(kernel/modem), I have repartitioned the card, factory reset before starting, everything I can think of, but this kernel won't boot past the splash screen.
However, when I revert to SpeedMod kernel(k13c) everything goes back to normal.
I would have thought I could flash this stock kernel over the i-9000 based kernel with the lagfix on both without issue, clearly I am wrong.
Can anyone see anything in my process that is inherently wrong, or even better would some other brave soul with stock Rogers Froyo be willing to try a flash? I wouldn't bother if this is your first crack at it though.
Thanks in advance to all who can help out.
So after wiping all caches and factory resetting, I get the following message at my Red Recovery screen:
E:Can't mount /dev/block/mmcblk1p2
(File Exists)
Is this important?
clemmie said:
So after wiping all caches and factory resetting, I get the following message at my Red Recovery screen:
E:Can't mount /dev/block/mmcblk1p2
(File Exists)
Is this important?
Click to expand...
Click to collapse
I get that all the time. No idea what the hell it is and have had to manually select my GSM bands when I flash a new rom or wipe dalvik cache since it started. Other then that no problems seem to be caused by it, for me.
Call off the dogs- after I installed the driver package that was included with Odin 1-Click I managed to get a master clear and a flash to the AT&T stock.
I must have spent 3 hours installing different driver packages today.
A shame it didnt work out smoothly. I'd be interested but am far too new to risk the troubleshooting..
Sent from my SAMSUNG-SGH-I896 using XDA App
Well, I have some very good news. This little kernel seems to be pretty special. After getting myself back to Rogers Froyo, I have done a few tests. I am getting very solid Linpack scores of 15-16 mflops and Quadrant Standard scores of 1400-1500. Using CPU benchmark, we have scores of about 725 ms @ 1000 hz and 700 ms @ 550 hz.
These scores are very solid and are about 20-25% improvement over stock Rogers Froyo Kernel.
This is promising as the kernel is a native Captivate kernel and could do a better job of servicing the many Froyo ROMs out there in terms of simplicity and stability.
The stock modem still needs more testing in terms of gps fixes and accuracy and data speeds.
I'll get back to you about those shortly.
If you have thought about staying on Rogers Froyo, this would be a good start for improvement.
clemmie said:
Well, I have some very good news. This little kernel seems to be pretty special. After getting myself back to Rogers Froyo, I have done a few tests. I am getting very solid Linpack scores of 15-16 mflops and Quadrant Standard scores of 1400-1500. Using CPU benchmark, we have scores of about 725 ms @ 1000 hz and 700 ms @ 550 hz.
These scores are very solid and are about 20-25% improvement over stock Rogers Froyo Kernel.
This is promising as the kernel is a native Captivate kernel and could do a better job of servicing the many Froyo ROMs out there in terms of simplicity and stability.
The stock modem still needs more testing in terms of gps fixes and accuracy and data speeds.
I'll get back to you about those shortly.
If you have thought about staying on Rogers Froyo, this would be a good start for improvement.
Click to expand...
Click to collapse
I would highly recommend this Kernel!! All the above benefits, plus fantastic battery life. The stock modem seems fine, although I've had better data transfer speeds and GPS locks from JL1 kernel, but this stock modem is perfectly fine.
Would love to see anyone else's results as well!
I like what I see so far. I am getting 1575 scores on quadrant (I know it doesn't mean much) but overall lag is gone.
I was a little freaked out this morning as the Rogers network was dead here this morning and I thought maybe I had done something with all this to kill cell / data. But everything cleared up after a few hours and I was back to normal.
Outcast, were you able to flash this custom Kernel without the issues that Clemmie came across? Much like phrenicthenub, I'd love to see the performance increase without the current bugs of custom ROMs, but I don't think I'm competent enough to troubleshoot if it all goes to hell.
As long as you disable any lagfixes and return any O/C or U/V kernels to normal you won't have these issues. Everything should work fine.
Sent from my SAMSUNG-SGH-I896 using XDA App
Did you guys do the 3e recovery fix first before being able to install CWM?
Hi guys... So i was trying to get SpeedMod to work with a i9000 modem like JK4, but my bluetooth is always noisy...
Right now, i have:
Latest SpeedMod kernel with LagFix enabled
JK4 Modem flashed.
What do i have to do to get this Rogers Supercirio's Voodoo kernel and modem ?
Thanks.
Elisha, I just took the plunge and got these flashed. Definately do the e3 recovery fix before setting up clockwork or anything else. That was the one part that gave me any trouble, but as soon as I got that sorted, everything went very well.
I'll try to pay attention to how things seem to perform and post my findings. Thanks for the encouragement again, Clemmie.
TheGrub said:
Hi guys... So i was trying to get SpeedMod to work with a i9000 modem like JK4, but my bluetooth is always noisy...
Right now, i have:
Latest SpeedMod kernel with LagFix enabled
JK4 Modem flashed.
What do i have to do to get this Rogers Supercirio's Voodoo kernel and modem ?
Thanks.
Click to expand...
Click to collapse
First you will need to boot into recovery and disable your lagfix. Back everything up with Titanium Backup. Download the files above to your root folder and reboot into recovery again. Using cwm, use the install zips option and flash both the kernel and the modem. Reboot yet again into recovery, clear your caches, then enable the new lagfix in your cwm options. It will take a while to convert your partitions from rfs to ext4, so be patient.
Sent from my SAMSUNG-SGH-I896 using XDA App
Thanks Clemmie,
I disabled LagFix from cwm and the speedmod kernel, rebooted, flashed modem with original JL1 modem, and then reflashed kernel with stock rogers froyo. backed everything up with Titanium backup. So i am currently back to stock, with a backup.
cwm is not in my recovery menu now, so if i use ODIN to flash the .tar version of supercurio's stock+voodoo kernel, does it contain cwm ?
ODIN with this kernel should work and then enable lagfix on first reboot by converting to ext4 right ?
Thanks alot, i am just starting with all this and want to make sure i understand everything before i take the plunge.
Thanks.
TheGrub said:
cwm is not in my recovery menu now, so if i use ODIN to flash the .tar version of supercurio's stock+voodoo kernel, does it contain cwm ?
Click to expand...
Click to collapse
Correct, it does.
TheGrub said:
ODIN with this kernel should work and then enable lagfix on first reboot by converting to ext4 right ?
Click to expand...
Click to collapse
Also correct.
Sent from my SAMSUNG-SGH-I896 using XDA App
Thanks ! i'll try that a little later... i'll let you know how it goes...
Well, so far, this Kernel seems to be the best thing to ever happen. I consistently get a score of 1501 in Quadrant standard (not from a fresh boot or anything, and running beautiful widgets and things, so I don't know if that makes a difference. I know with most benchmarks you're meant to close as much as possible, etc) and things just seem to be nice and smooth overall. On top of that, the battery life is, all of a sudden, seemingly PHENOMENAL! All whilst using the stock ROM. Either one of those benefits alone would have made the flash worth it. This is the way this thing should have run from the beginning.
I'll test out how well the GPS works, and try to pay attention to my signal strength with WIFI and calls and report back.
Thanks I figured as much as I had to do the 3e fix after I accidentally upgraded to the official Rogers Froyo the first day I got the phone.
Shroff said:
Elisha, I just took the plunge and got these flashed. Definately do the e3 recovery fix before setting up clockwork or anything else. That was the one part that gave me any trouble, but as soon as I got that sorted, everything went very well.
I'll try to pay attention to how things seem to perform and post my findings. Thanks for the encouragement again, Clemmie.
Click to expand...
Click to collapse
Ok, so i have used the tar version with ODIN3 v1.52 to flash stock+Voodoo-Froyo-I896-UXJL1. As i said, i was on stock kernel with stock JL1 modem.
Flash went great, took about 5 seconds, then rebooted. First reboot took about 7 or 8 minutes with a robot voice telling me the different steps it was in...
Everything workd without hickups... This kernel works realy well and speed is definitely there !
Thanks for the help guys...
Is it ok to use a modded kernel (like paragon) with a stock rom (KB1)?
I believe so.i think as long as you use a 2.2 kernal. I'm probably wrong though. Lol
I kill coneys, not phones.
The various release notes imply that it is possible but since its my wife's phone I dont really feel like getting killed for bricking it.
kevria said:
The various release notes imply that it is possible but since its my wife's phone I dont really feel like getting killed for bricking it.
Click to expand...
Click to collapse
Have no fear. If you follow the instructions you will be totally impressed with the performance improvement. I am running totally stock with the exception of my stock kernel with voodoo lagfix and you can't beat it with a stick.
clemmie said:
Have no fear. If you follow the instructions you will be totally impressed with the performance improvement. I am running totally stock with the exception of my stock kernel with voodoo lagfix and you can't beat it with a stick.
Click to expand...
Click to collapse
Which kernel are you running?
Edit: Nevermind, just read your sig file.
Cognition 4.x is basically stock Froyo with a lagfixed kernel.
If you don't want to venture too far from stock, you could use Supercurio's stock + Voodoo lagfix kernel for KB1.
http://forum.xda-developers.com/showthread.php?t=870760
You can flash the CWM version using SGS Kernel Flasher. It'll take a while for the first boot up, but you'll get audio prompts that it is working. Just take your typical precautions...backup, blah blah blah.
Works great with KB1.
lactardjosh said:
If you don't want to venture too far from stock, you could use Supercurio's stock + Voodoo lagfix kernel for KB1.
http://forum.xda-developers.com/showthread.php?t=870760
You can flash the CWM version using SGS Kernel Flasher. It'll take a while for the first boot up, but you'll get audio prompts that it is working. Just take your typical precautions...backup, blah blah blah.
Works great with KB1.
Click to expand...
Click to collapse
I actually have CWM flashed onto her phone from installing PlumbBob's GPS fix so I could flash it with CWM. Thanks.
My main reason for flashing a different kernel was because her battery life is lousy compared to my phone with Serendipity and Paragon.
kevria said:
I actually have CWM flashed onto her phone from installing PlumbBob's GPS fix so I could flash it with CWM. Thanks.
My main reason for flashing a different kernel was because her battery life is lousy compared to my phone with Serendipity and Paragon.
Click to expand...
Click to collapse
IMHO, the battery life has been great since flashing that kernel. I haven't done any official logging or anything, though.
And the difference in speed because of the lag fix is unbelievable. Incomparable.
lactardjosh said:
IMHO, the battery life has been great since flashing that kernel. I haven't done any official logging or anything, though.
And the difference in speed because of the lag fix is unbelievable. Incomparable.
Click to expand...
Click to collapse
Great, thanks. I guess I know what Im doing this weekend.
Edit: Installing that Kernel didnt wipe your phone did it?
Voodoo+KB1 = Speed, Performance & Reliability
lactardjosh said:
If you don't want to venture too far from stock, you could use Supercurio's stock + Voodoo lagfix kernel for KB1.
http://forum.xda-developers.com/showthread.php?t=870760
You can flash the CWM version using SGS Kernel Flasher. It'll take a while for the first boot up, but you'll get audio prompts that it is working. Just take your typical precautions...backup, blah blah blah.
Works great with KB1.
Click to expand...
Click to collapse
I absolutely agree with you lactardjosh.
Suoercurio has done a fantastic job in creating these kernels.
I flashed the V+KB1 the other day and my devices runs as if it's on a silicon base. Smooth - Extremely responsive - No difference in battery life - and most importantly - All of the features that are supposed to work...do!
Peace-
Liv33viL
kevria said:
Great, thanks. I guess I know what Im doing this weekend.
Edit: Installing that Kernel didnt wipe your phone did it?
Click to expand...
Click to collapse
Flashing the kernel did not wipe my phone. BUT, you should definitely do a back up before flashing it. Just good practice.
The first time you boot up after flashing the kernel, it will take a while to finish booting. It'll stay on the AT&T World Phone splash for quite a while. You'll get a digitized voice telling you that the Voodoo lag fix is running and it'll give you an estimated time to complete it. The first time I did it, I couldn't understand what it said, but after messing up something else and having to go back to 2.1 and then upgrade to 2.2 again (which did wipe my phone), I realized that the first time it had told me it was going to take 10 minutes to enable the lag fix. The second time around, it took 2 minutes because there was nothing extra on the phone since it had just been wiped. So, depending on how many apps, etc, you have installed, the lag fix will take a more or less time. Let it run, find something else to distract you from how long it is taking.
I have enabled the lagfix on my phone. My wife has a LOT of apps on her phone so it will take awhile. I backed the rom up using rommanager and copied the Titanium backup directory off to my home computer.
I installed the Supercurio kernel last night on my wifes phone so it will be interesting to see whether the battery life gets any better. The phone should run smoother though.
kevria said:
I installed the Supercurio kernel last night on my wifes phone so it will be interesting to see whether the battery life gets any better. The phone should run smoother though.
Click to expand...
Click to collapse
My Captivate runs great on the KB1+Voodoo Kernel from SuperCurio!
The performance of this Kernel has actually kept me on the stock ROM (for now)
bobapunk said:
My Captivate runs great on the KB1+Voodoo Kernel from SuperCurio!
The performance of this Kernel has actually kept me on the stock ROM (for now)
Click to expand...
Click to collapse
I told my wife that her phone should be snappier now but the battery life may stay the same. Also told her to drain the battery down to nothing, charge to full while off, unplug and plug back in, wait until its full then unplug and turn it on.
Hi guys make this post cause im kinda new to think kernel instal/removal and didnt find anythink usefull in google.So i have SGS i900 darky rom 9.3 xwjs5 and kernel [email protected]#24.So question is does speedmod a lagfix ?How do i remove it/replace it and is it normal on quadrant to have 1101 score with this setup?And does the kernel i wrote is the default one from darky.And can anyone post any other lagfix suitable for this rom cause vodoo drains way much batt.
Speedmod does have a lagfix. Quadrant scores vary but they don't really matter as their not indicative of how good your phone is running. You have to boot into recovery and then go into Speedmod menu. Then go to lagfix/tweaks to enable whatever you want.
You don't need to enable anything if you feel your phone is fast. Only do it if you think your phone is lagging.
There are a whole bunch of kernels here
http://forum.xda-developers.com/showthread.php?t=966646
utsmaster18 said:
Speedmod does have a lagfix. Quadrant scores vary but they don't really matter as their not indicative of how good your phone is running. You have to boot into recovery and then go into Speedmod menu. Then go to lagfix/tweaks to enable whatever you want.
You don't need to enable anything if you feel your phone is fast. Only do it if you think your phone is lagging.
There are a whole bunch of kernels here
http://forum.xda-developers.com/showthread.php?t=966646
Click to expand...
Click to collapse
So speedmode is like think that have alot tweaks?and those new kernels i instal over this one and flash with clockwork right
speedmod has a lagfix but to be honest I dont think its essential. Its snappy enough without it. Also the latest stock releases are super fast also.
sizzlers said:
So speedmode is like think that have alot tweaks?and those new kernels i instal over this one and flash with clockwork right
Click to expand...
Click to collapse
Yeah you flash it with clockwork. But to be honest, just like the poster above said, you don't need lagfixes with most of the new roms as they are all very fast as is. And sometimes the lagfix might also screw up your phone. I applied the lagfix to darkyy's 9.3 and it killed my battery much faster and when I tried to go back to RFS my phone gave me problems. So unless you really need it I don't think that you should apply the lagfix.
But to each his own. Good luck
I was able to root my captivate, my specs are: 2.3.5- 1897UCKK4- kernel 2.6.35.7-I897UCKK4-CL614489 Gingerbread. Downloaded ROM manager and it doesn't list captivate when I try to flash clockworkmod, why? Also have OCLF and when I try to lagfix it says I don't have playlogos file. Can some help me out here. I am fairly new to this, but I think it has something to do with EXT2 not being EXT4?
Don't use ROM manager. You need to flash a kernel that has CWM baked in. You can find one in the dev section. Also, I'm pretty sure lagfix is not really used anymore
Sent from my CM9 ICS i897 Captivate
captivate
Thank, I used Odin and the kk4 kernel you recommended, seems to work good, but I was wondering how I can make my phone faster. I only get a 1240 with quadrant
Quadrant means nothing... Those scores are able to be manipulated by a single line of code.
root 2.3.5 CKK4
I was able to root my captivate, my specs are: 2.3.5- 1897UCKK4- kernel 2.6.35.7-I897UCKK4-CL614489 Gingerbread.
Click to expand...
Click to collapse
gj23, Thanks for listing the fw versions of your phone, I'm interested in how you were able to root your stock 2.3.5 Captivate. I have tried three the following root methods and all have failed.
1) Super1Click, freezes during su from file system errors in logs.
2) update.zip to sdcard, fails with file signature not recognized.
3) rageagainstthecage.zip, fails to reconnect to PC after adb disconnects; or terminal emulator freezes up.
So I'm wondering if AT&T didn't make this build harder to root.
Is there a rooted mod compatible with this phone build?
If so, Can I use a rooted mod and flash it without being rooted first to get root permission?
I have searched and read so hopefully I'm not wasting anyones time. These are my phone specs.
Model Samsung Captivate SGH-I897
Firmware 2.3.5
Baseband I897UCKK4
Kernel 2.6.35.7-I897UCKK4-CL614489
Build GINGERBREAD.UCKK4
^
Rooting kk4 is cake.
Odin flash mtcarey's Corn Kernel version 7.0a and reboot into Recovery. There is an option to Root.
U can find the Corn Kernel thread in the Captivate Development forum.
Sent by XDA Premium App
worked like a charm
Thanks for the info, I was afraid of compatibility issues with modem/kernel/bootloaders but this worked flawlessly!
Im trying to run 2.3.5 stock with lagfix
This is the only forum that comes close to my question.
what i am trying to do:
Run 2.3.5 Gingerbread stock (i have to official kies mini release)
apply a lagfix
debloat.
but i always get a random reboot effect.
i took a look into the Fasty Rom but the DL links are dead.
since this was the only rom that seemed to appeal to me right now.
I wouldnt Mind a Deodexed rom. but i want to keep it as much of a stock as possible.
I am still learning the captivate ways since this was given to me and i use it as a tablet.
the stuff i use.
I897UCKF1-AutoRoot-DesignGears.tar
CornKernel_UCKK4_v706.tar (v705 also causes reboots)
my potential problems are
init.d
CWM (kernel)
and debloating (have gotten cases where the reboots dont start till after i debloat.)
any information might help since ive searched google and the androidforums website.
but the lagfix seems to be intended for 2.2 and 2.1
EDIT:
ima be trying this in the mean time.
4-2ndtwin said:
Odin flash mtcarey's Corn Kernel version 7.0a and reboot into Recovery. There is an option to Root.
U can find the Corn Kernel thread in the Captivate Development forum.
Click to expand...
Click to collapse
so far its working wonders for me. ran through a whole tutorial of a game on an emulator.
im gonna fresh install and debloat.
1stRarewolf said:
This is the only forum that comes close to my question.
what i am trying to do:
Run 2.3.5 Gingerbread stock (i have to official kies mini release)
apply a lagfix
debloat.
but i always get a random reboot effect.
i took a look into the Fasty Rom but the DL links are dead.
since this was the only rom that seemed to appeal to me right now.
I wouldnt Mind a Deodexed rom. but i want to keep it as much of a stock as possible.
I am still learning the captivate ways since this was given to me and i use it as a tablet.
the stuff i use.
I897UCKF1-AutoRoot-DesignGears.tar
CornKernel_UCKK4_v706.tar (v705 also causes reboots)
my potential problems are
init.d
CWM (kernel)
and debloating (have gotten cases where the reboots dont start till after i debloat.)
any information might help since ive searched google and the androidforums website.
but the lagfix seems to be intended for 2.2 and 2.1
EDIT:
ima be trying this in the mean time.
so far its working wonders for me. ran through a whole tutorial of a game on an emulator.
im gonna fresh install and debloat.
Click to expand...
Click to collapse
As you probably noticed, Corn is probably your best answer for what you wanna run.
If you're looking into something with better performance, I'd suggest a JB ROM. That being said, this device will only go so far which the hardware it has.
Any recommendations?
BWolf56 said:
As you probably noticed, Corn is probably your best answer for what you wanna run.
If you're looking into something with better performance, I'd suggest a JB ROM. That being said, this device will only go so far which the hardware it has.
Click to expand...
Click to collapse
if this is true about the performance, how noticeable would it be?
and what Jellybean Rom Would you suggest that could give me a balance of performance and battery life?
which is something im going for right now.
so far the specs i have are running great but if there really is a way to boost my performance by more then 30% it would be a welcoming sight.
1stRarewolf said:
if this is true about the performance, how noticeable would it be?
and what Jellybean Rom Would you suggest that could give me a balance of performance and battery life?
which is something im going for right now.
so far the specs i have are running great but if there really is a way to boost my performance by more then 30% it would be a welcoming sight.
Click to expand...
Click to collapse
You won't get much more than what you're getting atm cause like I said, the hardware can only go so far.
As for ROM, we don't make suggestion (to avoid flaming). If you really wanna take on a JB ROM, look them up and choose the one that suits your style the best.
i see then...`
BWolf56 said:
You won't get much more than what you're getting atm cause like I said, the hardware can only go so far.
As for ROM, we don't make suggestion (to avoid flaming). If you really wanna take on a JB ROM, look them up and choose the one that suits your style the best.
Click to expand...
Click to collapse
oh, i see.
its hard to find all of them since theres so many threads with ROMs.
ill try and take a look. but it seems like it would be just more time spent on it then it would actually be beneficial.