Related
Firstly guys, I'd like to apologise for this being my first post. I'm usually a regular over at the SGS forums but am yet to have had a response. I'm ****ting bricks currently, so here goes...
ARGH wtf. Just as I thought I had the perfect phone, it messes up! Darky's ROM went mad on me. Kept rebooting the phone. Kept vibrating throughout. No idea what's wrong with it. Tried to do a wipe install of the ROM again, but the bloody thing has disappeared from the SD card! What am I going to do now? Reflash back to my previous firmware and start all over again, AGAIN? Ffs.
Just for the record, I'm basically stuck in recovery mode. It's either that or staring at the Nexus S logo as it attempts to boot, over and over and over... I'm so angry right now! I didn't do anything to the phone for this to happen! Bad luck or what. Really hope there is a solution to this. I don't suppose there's anyway of accessing the device's SD memory when in recovery mode? I just need to plant the update.zip on the SD card again so I can reflash it!
Click to expand...
Click to collapse
I would massively massively appreciate any help you guys could give me. I've had nothing but bad luck with my Galaxy S
[EDIT] Oh and by the way, I still have full access to my three-button combo modes. Clockwork recovery console and Download mode still fully accessible.
Hi
I'm also new here and got my SGS yesterday, but i had a HTC Desire before.
If you can get in to Clockworkmod recovery you should be able to push the file via adb to the sdcard. That was possible on the Desire at least.
vippe said:
Hi
I'm also new here and got my SGS yesterday, but i had a HTC Desire before.
If you can get in to Clockworkmod recovery you should be able to push the file via adb to the sdcard. That was possible on the Desire at least.
Click to expand...
Click to collapse
Hey there, thanks for your response! What may I ask is 'adb'?
Android development....something
Just flash back to eclair again. The time it took you to get an answer on a forum is longer tham the time it takes to flash.
Sent from my GT-I9000 using XDA App
I'm guessing you screwed up without diabling lagfixes or something, just install JM8 with repartition enabled and using pit 512 file again then install clockwork update.zip then install whatever rom (but in this case darkys). It starts to become habbit when testing new roms to do all of them steps, The first time something happens you **** bricks but soon relize the SGS is alot more brick poof then you think (unless you are one of the poor souls with broken recovery modes)
But anyways, calm the hell down. Everything is fine.
ickyboo said:
I'm guessing you screwed up without diabling lagfixes or something, just install JM8 with repartition enabled and using pit 512 file again then install clockwork update.zip then install whatever rom (but in this case darkys). It starts to become habbit when testing new roms to do all of them steps, The first time something happens you **** bricks but soon relize the SGS is alot more brick poof then you think (unless you are one of the poor souls with broken recovery modes)
But anyways, calm the hell down. Everything is fine.
Click to expand...
Click to collapse
I've absolutely no idea what files to flash... I'm a bit of a noob when it comes to flashing with the SGS. Quite embarrassing actually because I used to flash my old Omnia HD with no problems whatsoever! Don't suppose you could link to files.
Don't worry, your Galaxy is not bricked. Please see here how to reflash from a PC.
I've downloaded all necessary files... I've got a CODE a MODEM the 512.pit but no CSC? Am I okay to flash with no CSC?
Eddzz!! said:
I've downloaded all necessary files... I've got a CODE a MODEM the 512.pit but no CSC? Am I okay to flash with no CSC?
Click to expand...
Click to collapse
CSC contains all carrier-related (like APNs) data.
Depending on the type of packaging some CODE files are complete with CSC.
In any case, you can flash a CSC (like ITV or XEU) even later.
Before to go with flash, I'd like to advise you to backup /efs folder on your SD and/or your PC. This is the only folder with information (like your IMEI configuration) that cannot be recovered in case of a total data loss.
After a long gruelling process of flashing and reflashing, I'm back on Darky's ROM. Problem though - App market is messed up. I can't download anything from the Market and it's also the 'old' Market theme... I think has something to do with the fact that I've flashed from Eclair straight to Darky's? (Which I was advised to do...) - How can I get my Market working again?! Everything is fine besides that!
[EDIT] I now have the new market interface but still cannot download a thing!
My phone has/was working fine for the longest time. Was running cog 3.04. Ever since trying to update to cog4, i get symlink error EVERY time i try to install. I am flashing back to stock, and doing a master clear every time.
Thinking it was the cog4 rom, i have tried serendipity, and paragon. Though the error is on different lines, it gives me a symlink error everytime it is installing. What gives! I will throw this phone in the garbage if i have to be stuck on stock now!
On another note, anytime i try to restore a backup (os backup, not apps), it will successfully restore, but then when it reboots it is back to the stock recovery. UGH. Someone please give me some guidance!
Do you get an error like this:
E: Can't symlink /system/bin/cat
E: Failure a lin 7:
symlink toolbox SYSTEM:bin/cat
installation aborted
I probably get at least one of these errors every time that I flash. I have asked around and some people say that it can be a bad download. I would recommend downloading cog4 again and maybe even 2 to 3 times and putting all of those on your internal memory (name them cog4, cog4a, cog4b.zip or something like that). This is what I do and typically at least one of the three/four that I have on there will work.
Yea I had one of these last night and it was just a bad download. Compared the file size and they were different
Sent from my SAMSUNG-SGH-I897 using XDA App
PLEAE SOMEBODY HELP I AM BEGGING PLEASE.
The ONLY custom rom i can install is cog3.04. Nothing else will work. I have flashed back to stock 2.1 and 2.2 and it does not make a difference. I have master cleared a million times. I have repartitioned my sd card also. From what i am gathering on the internet, is that i need to change the size of the system partition. It is too small. I cannot find ANY WAY AT ALL to do that. I will seriously send someone money over paypal if they just please try to help me. I am dead serious.
xsteven77x said:
PLEAE SOMEBODY HELP I AM BEGGING PLEASE.
The ONLY custom rom i can install is cog3.04. Nothing else will work. I have flashed back to stock 2.1 and 2.2 and it does not make a difference. I have master cleared a million times. I have repartitioned my sd card also. From what i am gathering on the internet, is that i need to change the size of the system partition. It is too small. I cannot find ANY WAY AT ALL to do that. I will seriously send someone money over paypal if they just please try to help me. I am dead serious.
Click to expand...
Click to collapse
The errors are different on every rom, but pretty much the same. It's always symlink error system/xbin/su or system/xbin/cap. ALWAYS. No matter what rom it is. BESIDES COG 3.04. That was the rom i had RIGHT before all this started. I tried to install cog 4 and it ****ed my phone. Not sure what to do....
Dead serious about paying someone to help me.
xsteven77x said:
The errors are different on every rom, but pretty much the same. It's always symlink error system/xbin/su or system/xbin/cap. ALWAYS. No matter what rom it is. BESIDES COG 3.04. That was the rom i had RIGHT before all this started. I tried to install cog 4 and it ****ed my phone. Not sure what to do....
Dead serious about paying someone to help me.
Click to expand...
Click to collapse
You have tried the full ODIN, and using Partition?
When flashing back to stock, use Odin3, and have the Re-Partition box checked
Note: Note I have not ever had to do that before, so not sure if would work
indomikey said:
You have tried the full ODIN, and using Partition?
When flashing back to stock, use Odin3, and have the Re-Partition box checked
Note: Note I have not ever had to do that before, so not sure if would work
Click to expand...
Click to collapse
Yes i have used the one click and the regular full odin. And yes i clicked the re-partition thinking that would help me. Makes no difference
The key to this mystery i think is the fact that cog 3.04 is the ONLY custom rom that will go on here...and was the one i had right before my phone got royally ****ed.
xsteven77x said:
Yes i have used the one click and the regular full odin. And yes i clicked the re-partition thinking that would help me. Makes no difference
The key to this mystery i think is the fact that cog 3.04 is the ONLY custom rom that will go on here...and was the one i had right before my phone got royally ****ed.
Click to expand...
Click to collapse
How about formatting through recovery menu? and then reinstalling with odin
indomikey said:
How about formatting through recovery menu? and then reinstalling with odin
Click to expand...
Click to collapse
Yes i have. Someone with a different phone but the same problem fixed it by doing some type of rm- rf /system through adb? It just totally deletes/wipes system partition? Not sure if that would help but anytime i try it says it cannot access system whether i have it mounted or not.
The problem seems to be (gathered this from reading) that the system partition is full and thats why it can't symlink or something. But if the system partition is getting formatted everytime i dont understand how that makes any sense.
xsteven77x said:
Yes i have. Someone with a different phone but the same problem fixed it by doing some type of rm- rf /system through adb? It just totally deletes/wipes system partition? Not sure if that would help but anytime i try it says it cannot access system whether i have it mounted or not.
The problem seems to be (gathered this from reading) that the system partition is full and thats why it can't symlink or something. But if the system partition is getting formatted everytime i dont understand how that makes any sense.
Click to expand...
Click to collapse
But even then, why would cog 3.04 install? And no other custom rom?
xsteven77x said:
But even then, why would cog 3.04 install? And no other custom rom?
Click to expand...
Click to collapse
Maybe Cog is still "suck" in that partition and can't be deleted, thereby taking up the space..... not sure why though and how to get at it, can you see the files through adb?
indomikey said:
Maybe Cog is still "suck" in that partition and can't be deleted, thereby taking up the space..... not sure why though and how to get at it, can you see the files through adb?
Click to expand...
Click to collapse
Thats an interesting theory, seems to make sense! I know how to do basic adb functions but i never really messed with the files/file system thorugh it. If you wanna give me any type of directions i would love it!
xsteven77x said:
Thats an interesting theory, seems to make sense! I know how to do basic adb functions but i never really messed with the files/file system thorugh it. If you wanna give me any type of directions i would love it!
Click to expand...
Click to collapse
Sorry I'm noobish when it comes to ADB, try this thread.... not sure if it will help: http://forum.xda-developers.com/showthread.php?t=717874 realize, it is not specific for captivate or any of our ROMS, its talking about Cyanogenmod, but hopefully you can use something there
I have to head out, if you are still having problems when I get back, I'll keep searching, good luck
Somebody ANYBODY. I can only install cog 3.04. Anything else and i mean ANYTHING gives me symlink system/xbin/su. That file is not even IN the roms i'm trying to flash in that folder! WTF
xsteven77x said:
Somebody ANYBODY. I can only install cog 3.04. Anything else and i mean ANYTHING gives me symlink system/xbin/su. That file is not even IN the roms i'm trying to flash in that folder! WTF
Click to expand...
Click to collapse
if the file isnt there, THAT is the problem. the update-script is looking for that file. have you tried actually removing that line from the update-script?
Pirateghost said:
if the file isnt there, THAT is the problem. the update-script is looking for that file. have you tried actually removing that line from the update-script?
Click to expand...
Click to collapse
I have tried removing that line, and tried moving that file into the folder. Makes no difference. It's doing this error on EVERY custom rom...i can't believe that every rom maker messed up the su symlink lol.
xsteven77x said:
I have tried removing that line, and tried moving that file into the folder. Makes no difference. It's doing this error on EVERY custom rom...i can't believe that every rom maker messed up the su symlink lol.
Click to expand...
Click to collapse
they didnt. there are literally thousands of people flashing roms every day....
that symlink works properly on all the captivates i have with all the roms that i throw together.....
Pirateghost said:
they didnt. there are literally thousands of people flashing roms every day....
that symlink works properly on all the captivates i have with all the roms that i throw together.....
Click to expand...
Click to collapse
That didnt come out right. It was meant to read "i do not believe that every rom maker messed up the su symlink". Meaning that ya, it is just me, i know it works fine for everyone else.
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
atquick said:
I'm not sure whats going on with my D3. However, I have RSD and I have .890 and .959 downloaded as well as Fastboot.
What I want to do is just wipe the phone completely and just flash it like its a brand new phone.
Anyone know how to do so? Please post a link or instructions, I would greatly appreciate it.
Click to expand...
Click to collapse
http://goo.gl/7NoAv
Androidsims said:
http://goo.gl/7NoAv
Click to expand...
Click to collapse
Tried that. It keeps failing saying something about size was not as expected or something like that.
Redownload?
Avelnan said:
Redownload?
Click to expand...
Click to collapse
I have. MD5 sums match up each time. Should I try removing the ext sd card?
I would redownload everything and try agian
littleneutrino said:
I would redownload everything and try agian
Click to expand...
Click to collapse
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
atquick said:
Alright, attempt will be made again. Should I redownload RSD again or just the sbf's?
Click to expand...
Click to collapse
Downloading the sbf's again. Went over to check and see if the phone was still on, The charging led is on, however the screen is off..
Held power, nothing. Held M + Power. Still nothing... Any thoughts on whats going on now?
I didn't see if you have pulled the SD card but yeah it can't hurt.
Sent from my DROID3 using XDA App
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
wattnxt said:
http://forum.xda-developers.com/showthread.php?t=1278056
Follow the first portion of the instructions on how to flash back to original 5.6.890. Note the making of a folder and it's name for the 890 flash.
Ignore the part about flashing the new ROM. These are the best instructions I've found so far for flashing back to stock via RSD lite.
Good luck, keep us posted.
Download and follow exactly and you'll be good to go.
Hope that helps.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It keeps failing.
Step 3 mbmloader.bin
Step 4 mbm.bin
Step 8 logo.bin
Step 9 'lbl'
I'm stuck.
Let me do some looking when I get home tonight. I remember there being a file for certain versions of XP that helped some people and they couldn't flash without it.
I never had it happen personally, but I know those that did were terribly frustrated.
I also hear the 959 version is easier to flash for some reason. Never flashed that version, so this is only hear-say. But I know it did flash easier according to posts.
I will try to dig up a link for you.
i am getting the same thing also getting the bad CG boot.. now this may be a fix but idk how this guy got it it.. i have been asking eveywhere maybe you guys could help me... here is the thread http://forum.xda-developers.com/showthread.php?t=1248721
I found this by Psouza. He is likely the foremost expert on making things easy as far as unbricking your D3. Rumor has it he has a set of unbrick tools floating around this forum somewhere, though I haven't found it yet. Try in the Development thread, for sure it has to be there somewhere.
Post number 84
psouza4 said:
For those of you having problems flashing this and/or are suspicious of flashing ebr, mbr, and parts of the bootloader, you can selectively just flash the rest of it.
See attachment.
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=715510&d=1315657647
Hope this helps.
I also saw that flashing the pre-installs file alone first helped someone. That file borked on me once, but I was able to adb it over and then execute it via adb to get my phone unbricked.
Please let us know what works for you, as all of this is a work in progress right now.
Good luck!
i don't know to much about adb and are looking for help on pre-installed files. I don't understand what that means or how to go about it? i also cant get past the bootloader screen, "invalid CG version". i can not boot up at all.
How bricked are you? can you boot into CWM? Are you able to boot into tools, or how far can you get?
What version were you running? 5.959 (stock) or 6.890 OTA or Leaked OTA or Soak test (all the same as far as 6.890 goes).
i can get into boot tools and just tryed another flash got to step 6 till it failed instead of 3.. I'm running stock. Cannot get passed boot tools... scratch all that just tried to flash again just on the off chance it mnight work and i got it. Going to try and re-root and CWN recovery with sdteel froids rom... will keep you in the loop
Awesome!!
Here is the link about the adb commands for preinstall.sh
http://forum.xda-developers.com/showpost.php?p=17196391&postcount=88
It helped me when I borked my leaked update. I ran into the same problem as limaxray did with too many files in /system. So make sure you clean out any apps you made into system apps before trying the update via the standard update route, and that all stock system apps are in place and properly named.
I had to remove some that updated partially with the leaked update when mine borked. I used the posted system dump to push them to the phone and then the update ran properly and updated them anyhow.
If for some reason re-rooting doesn't work for you. Go to /system/bin and remove su, busybox. Do the same in /system/xbin. For some reason if you already have them in there when you run the process, it will say success but no root after reboot. My 2c as it happened to me. You do not need to remove superuser.apk, but you will have to update it in the market after you re-root.
Congrats!!
I see now too there is a fastboot and moto-fastboot. moto-fastboot has worked for some who had issues from what I've found.
Keep us posted, and smile knowing you've recovered from a bork; none of us got where we are without doing it at least once, so you're in good company.
re-rooted and installed bootstrap, just got steel droid all loaded up and all is good.... thanks for your speedy responses and detailed instructions and links. I realy think all that happened was i took everything aet it sone last time tried to flash and it went threw. All i used was RSD lite and flashed the 8.6.590 fast boot file and after a several retries it went threw. If anyone needs help on this i will post the file links if you need the ones i used
Sorry for the long read, this is half rant and half question.
Alright, I got a captivate a long time ago (about a year and 3 months ago), loved it, rooted it and installed cyanogenmod as soon as I got home, changed roms and kernals constantly, did whatever I wanted to do.
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
-Pirate said:
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
Click to expand...
Click to collapse
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
-Pirate said:
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Click to expand...
Click to collapse
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
-Pirate said:
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
Click to expand...
Click to collapse
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
U def don't need a jig. If it's booting it's not bricked. Try removing battery, start Odin, hold down power and down, plug in and put battery in. This should bring u to download mode.
prbassplayer said:
If you would have actually searched you would have known it was a bug in the glitch. There are atleast 40 pages about that.
Click to expand...
Click to collapse
I did start to see a few people with the problem, however many people do not follow up with what fixes their problem, and I did what a few people had said to do.
prbassplayer said:
If you flashed ICS you should know it takes 2 flashes for it to work first time. Having a jig around is always a good idea as well.
Click to expand...
Click to collapse
I should of mentioned that I did flash a few times, 3 total I think, it was getting stuck at boot.
prbassplayer said:
Stuff doesn't work as intended. Keep in mind everything is still in dev and not all devices are the same. But you should have searched a little more and it would have ran =/
Click to expand...
Click to collapse
I understand that **** happens but honestly my old captivate could always get into recover mode and download mode no matter what, it's extremely frustrating that something changed with the newer models. One of my questions was what caused the brick? I did nothing wrong from what I see and it was running perfectly until I tried to restart/boot into recovery.
Oh and mbc663, thanks but download mode doesn't work at all, nor does recovery obviously.
I can't say exactly what you are doing. Best advice I can do Re download your .zips Flash back to stock GB and try again.
-Pirate said:
About 3 months ago my screen stopped working.. So I take it in and they give me a refurb captivate, looked brand new so I didn't mind. However, when I tried to get into recovery it didn't work, the 3-button-method just wouldn't work at all, period, so I try to get it to work, gets stuck in bootloop.. pretty much every time I try to flash a rom something goes wrong and I get stuck in a bootloop but I can usually get into recovery or download mode because I had CWM.
So I'm on maxq's rom and it's working great for the past 2 months, decide not to mess with kernals or anything, however today I decided to try ICS, load it up, everything's fine, then I realize my soft keys aren't working, search for awhile, can't find anything, finally just manually start looking through the rom pages, and someone said that if you have the problem to just odin back to stock and try again.
I odin back to stock, but now 3 button combo doesn't work.. So more searching, find that I can run the 3e fix by TRusselo, doesn't work because I need root, more searching on how to root without recovery, find "SuperOneClick", root with superoneclick, then run 3e fix, everything is working fine, I check my email and load the ICS files onto SD card, go to restart and go into recovery mode.. Bricked, stuck in a bootloop, won't go to recovery, won't go to download, nothing.
Why the **** was I able to do anything I wanted with my old captivate, but if I even root this one it bricks? And what did I do to even brick it? I only ran the 2 programs and both of them worked flawlessly.
I guess my only option is to usb jig it, but honestly now I'm convinced that the phone is just faulty, I want to run the thing over.
Click to expand...
Click to collapse
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Sounds like you got one of the refurbs that is missing the SBL. Have you looked at this thread? http://forum.xda-developers.com/showthread.php?t=1129821
I've not had this problem myself but it sounds like that might help. If I remember reading correctly, once this is flashed it should stick as long as you don't flash any other bootloaders on top of it.
Its not missing the sbl. The sbl it has doesn't respond to key combos. Derpa sherpa moment for samsung I guess?
Rofl yeah...if it was missing the sbl it would be fuggin bricked!
studacris said:
Kangi...if you flash a firmware package without bootloaders, you won't have to do the 3 button fix every time. And if you keep a copy of the update.zip on your pc you don't have to even root, let alone bother with side loading ROM manager.
Cezar has a no boots jf6 and after you run that, you can still use master clear in one click.
Click to expand...
Click to collapse
I know, thanks. I'm such a creature of habit, I started doing it like this a bit over a year ago, and has worked flawlessly for me(just jinxed myself!) so I never saw a reason to "fix what aint broke".
I'll take a look at Cezar's thanks!
Yeah, missing SBL was a poor choice of words. My bad.
kangi26 said:
Last year, I had issues with my original Cap, and got a "new" one. I learned that the bulk of the Caps going out as replacements are referbs. The one I got was a 1008 build, and does not have 3 button recovery. There are minor differences with each and every Cap that's out there. That's why some have issues with ROM's and some don't, some can over clock like crazy, and some can't at all. My guess is you have a 1008 as well, but that really doesn't matter. You just have a different device and as you seem to already have learned.
It sounds like there is more research you need to do. Even though the devices are a bit different, if you are having issues with ROM's loading, then I would say it's more of a procedure issue, than one with your device.
My procedure, is,
Remove SD/Micro SD
Odin1 Click to Stock JF6, and Master Clear(This will erase EVERYTHING)
Root with One-Click Root
Use Sideload Wonder Machine to install ROM Manager, copy update.zip and 3buttonFix to my SD, then reboot into recovery
Once in recovery I install the 3buttonFix, and install my new ROM
For me this has proven to be a very good method versus going from one ROM to another. The Master Clear cleans EVERYTHING off of your SD, so there is no chance for anything to corrupt your new install. Anytime I read a post of a install gone FUBAR, USUALLY a Flash To Stock/Master Clear (FTS/MC) fixes it
Before using Odin 1 Click, check your devices build number!! If it is higher than 1012, I would NOT recommend using 1 click, there is a higher chance of hard brick on the newer devices
Click to expand...
Click to collapse
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
kangi26 said:
3buttonFix to my SD, then reboot into recovery
Click to expand...
Click to collapse
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
-Pirate said:
I didn't think anyone else was going to reply to this thread, whoops.
Thank you for helping me, but I'm still having trouble.
Rom manager doesn't show up in Market, Sideload wonder machine tells me [INSTALL FAILED OLDER SDK] with any apk of Rom manager I find.
How do you reboot into recovery when 3buttonfix hasn't been applied yet?
This sucks and is extremely frustrating, I feel like my captivate is just trolling me.
Click to expand...
Click to collapse
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
kangi26 said:
When I get home later tonight I'll link you everything you'll need. Again, VERY important, what is your build number? If it's 1012 or higher, don't use Odin 1 click
Sent from a autonomous device
Click to expand...
Click to collapse
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
-Pirate said:
Ok, finally got it working, I did exactly what you said, I found the rom manager 3.00.002 or whatever and that worked with sideloader, it took some messing around with but I'm running ICS now, thank you so much man, you've helped me so much, and now I can change roms and keep up to date without worrying about constantly soft-bricking.
As for my build number, I'm not sure, the only thing I see under build number in settings is: "IML74k"
Click to expand...
Click to collapse
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
kangi26 said:
The build number is actually under your battery, and looks like 10.06, 10.07, 10.08 and so on. It is the production date
Edit** And as a side note, do NOT try to use the 3buttonFix with a GB ROM, it WILL brick your phone in a really bad way. ONLY use it with 2.1 or 2.2
Click to expand...
Click to collapse
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: deleted
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
-Pirate said:
Is it weird that I don't have a build number? It seems I can't post pictures without a few more posts, maybe this will work: imgurDOTcom/26sXGl.jpg
And thanks for the warning on the 3buttonfix, I'm going to have to read more about bootloaders though, I don't understand what you and studacris were talking about earlier in the thread, haha.
Click to expand...
Click to collapse
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
kangi26 said:
I havent seen that before, there doesnt seem to be a build#
Might want to pull that photo, it's not too good having your IMEI number publicly displayed
Click to expand...
Click to collapse
Maybe because it's a refurb? and whoops didn't think about that.
-Pirate said:
Maybe because it's a refurb? and whoops didn't think about that.
Click to expand...
Click to collapse
I'm not sure why, mine is a referb, and I have a sticker with mine on it. Ooh well, it is what it is
Sent from a autonomous device
I know this is a common thing, as I searched before coming to the conclusion that I had to create my own thread about this topic. However, everyone says to re-flash to stock, which is what caused this problem for me. I had a huge error with the phone, and after 2 weeks of flashing, I am able to get it to this stage where it will boot up, but after booting up, the screen turns black, but the bottom buttons light up, and can be pressed, but no action.
I can access recovery and download mode. Odin recognizes my phone. I can charge with phone off (the battery image shows it charging.)
Here is the thread where I discussed my issues if you care to learn more about my issues (it was a dbdata error).
androidforums.com/samsung-galaxy-s/567335-factory-reset-wont-fix-galaxy-s-infinite-boot-mode.html
Anyways, now there is no errors (no red lines during recovery mode). But I have no idea what to do.
No one has a clue? This really sucks, I've spent so much time trying to fix it when all along it can't really be fixed it seems.
Try flashin to Stock i897ucKK4.... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
Try flashin to Stock i897ucKK4.... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
I've tried that. With that rom it boot loops and gives me a dbdata error.
Edit. Just tried again and after the att screen during boot up it gives me different variations of this screened like a grainy type of image. I snapped a pic below. I tried going into recovery and it gave me the same image on the screen.
Imgur.com/qyo5P.jpg
U need to flash the KK4 WITH the GB Bootloaders.
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
U need to flash the KK4 WITH the GB Bootloaders.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
(I've tried that as well, and I tried it again)
After flashing it booted in recovery, and tried to do the wipes.
Failed to mount /sdcard (I/O error) -- (There's no SD card inside, so that's probably why)
E:copy_dbdata_media: can't mount /sdcard your storage not prepared yet, please use UI menu format and reboot actions.
--Wiping data
Formatting /data...
Formatting/dbdata...
Formatting /cache...
Data wipe failed.
Then I tried a wipe data/factory reset. And this time it said Data wipe completed.
Then when I rebooted it said
Failed to mount /data (invalid argument)
And then it said another error but it was in yellow, so I didn't really catch it.
And it boot loops.
[Thank you for attempting to help me by the way!]
Do a search in the Q & A forum for the dbdata error that you are getting. This has happened before to several persons and i do remember that there were a few threads on this already.
U probably are going to have to flash a stock firmware (that is contained in a .tar file) through regular Odin3 v1.83 (or similar). This Odin is Not a "one click". Make sure the .tar file for the stock contains the dbdata.rfs file and also don't use the pit file. See if that works. --- The i897ucKF1 in the Dev forum would be a firmware that comes to mind that has all u need. Quick search should lead u to that one.
If successful, u should be able to flash up to KK4 afterwards or go to Dev Roms if u want.
4-2ndtwin said:
Do a search in the Q & A forum for the dbdata error that you are getting. This has happened before to several persons and i do remember that there were a few threads on this already.
U probably are going to have to flash a stock firmware (that is contained in a .tar file) through regular Odin3 v1.83 (or similar). This Odin is Not a "one click". Make sure the .tar file for the stock contains the dbdata.rfs file and also don't use the pit file. See if that works. --- The i897ucKF1 in the Dev forum would be a firmware that comes to mind that has all u need. Quick search should lead u to that one.
If successful, u should be able to flash up to KK4 afterwards or go to Dev Roms if u want.
Click to expand...
Click to collapse
I've tried 3 different roms with Odin3 v1.85. (that contain dbdata.rfs in the tar)
Maybe with that rom I'll have better luck. I searched for that rom at samfirmware and downloaded it. I searched in the dev forum, and all I got was an odin one click for that rom, and you said to do the regular version.
I flashed it, and it gave me the same error as before. With the data wipe failed and other errors. Then when it boots, it boot loops only the att logo.
Att logo, darkness for a second. Then repeat.
Also. I've done numerous searches for the words I'm getting, and every one says to flash back to the kk4 stock rom, but that's what causes the problems for me.
Is there anyone that can help at this point?
Is it possible that I have messed up partitions on the internal SD card? I found a way to fix that, but its for the HTC incredible. Any ideas on a captivate version of this thread?
forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/#entry56396
albokid2468 said:
Is there anyone that can help at this point?
Is it possible that I have messed up partitions on the internal SD card? I found a way to fix that, but its for the HTC incredible. Any ideas on a captivate version of this thread?
forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/#entry56396
Click to expand...
Click to collapse
Have you tried this one yet? http://forum.xda-developers.com/showthread.php?t=731989
This is probably the best restore rom I know of, it will flash eclair bootloaders so you will have to reflash gingerbread bootloaders before you flash any current roms.
If this doesn't do it then it sounds like you may have a bad spot in the memory module itself, possibly a bad transistor in the circuit. You may need some advanced help from a technician, I don't know if any of these jtag guys have advanced diagnostics but it wouldn't hurt to check it out.
As a last resort, you may have to send it in to Samsung.
crt60 said:
Have you tried this one yet? http://forum.xda-developers.com/showthread.php?t=731989
This is probably the best restore rom I know of, it will flash eclair bootloaders so you will have to reflash gingerbread bootloaders before you flash any current roms.
If this doesn't do it then it sounds like you may have a bad spot in the memory module itself, possibly a bad transistor in the circuit. You may need some advanced help from a technician, I don't know if any of these jtag guys have advanced diagnostics but it wouldn't hurt to check it out.
As a last resort, you may have to send it in to Samsung.
Click to expand...
Click to collapse
I've tried that one. That is one of the few where it will give no errors, however it boots up to a black screen. I believe that was the state I was in when I started this thread, with that rom.
Is the memory module or the transistor in the circuit located on the main board of the device. I was thinking of buying a logic board (mother board) and replacing it with a new one.
Although at this point, I got the Galaxy S3 so this phone isn't really a necessity at this point.
albokid2468 said:
I've tried that one. That is one of the few where it will give no errors, however it boots up to a black screen. I believe that was the state I was in when I started this thread, with that rom.
Is the memory module or the transistor in the circuit located on the main board of the device. I was thinking of buying a logic board (mother board) and replacing it with a new one.
Although at this point, I got the Galaxy S3 so this phone isn't really a necessity at this point.
Click to expand...
Click to collapse
Hi bro, have you solved your problem? Eager to hear from you cause I am having the excat same trouble.....
qaler2010 said:
Hi bro, have you solved your problem? Eager to hear from you cause I am having the excat same trouble.....
Click to expand...
Click to collapse
Look here: http://forum.xda-developers.com/showthread.php?p=39614278#post39614278
BWolf56 said:
Look here: http://forum.xda-developers.com/showthread.php?p=39614278#post39614278
Click to expand...
Click to collapse
Thks for your reply
I am not new to captivate, I have already had it for nearly 2 years, and everything including odin ways that used to work now doesn't....
So strange, yesterday it was ok as usual ,but when I got up this morning and it couldn't light up the screen no matter what physical button I hit. So I did flashing but it results in nothing.
Use I897UCJF6-final-OCD-REV0 and my phone can boot up but screen comes black during boot animation
Use 3FileKF1NOBOOT or JF6_secure, my phone just gets stuck on the first boot screen
Use custom recovery, then (E:failed to mount /data (file exists) E:delete_data_files: can't mount /data your storage not prepared yet, please use ui menu for format and reboot actions)
So sad now...I haven't backed up my data and for now it looks like I could never get it back...
qaler2010 said:
Thks for your reply
I am not new to captivate, I have already had it for nearly 2 years, and everything including odin ways that used to work now doesn't....
So strange, yesterday it was ok as usual ,but when I got up this morning and it couldn't light up the screen no matter what physical button I hit. So I did flashing but it results in nothing.
Use I897UCJF6-final-OCD-REV0 and my phone can boot up but screen comes black during boot animation
Use 3FileKF1NOBOOT or JF6_secure, my phone just gets stuck on the first boot screen
Use custom recovery, then (E:failed to mount /data (file exists) E:delete_data_files: can't mount /data your storage not prepared yet, please use ui menu for format and reboot actions)
So sad now...I haven't backed up my data and for now it looks like I could never get it back...
Click to expand...
Click to collapse
Try using Odin KK4 with bootloaders. JF6 is really outdated.
BWolf56 said:
Try using Odin KK4 with bootloaders. JF6 is really outdated.
Click to expand...
Click to collapse
Thanks again for your quick reply.
//Now I have only found one kk4 with bootloader download link in hotfile.com, which is currently not banned in my country...
So would you please be that kind to post another download link like in mediafire, dropbox or googled docs?
But I don't really think it is the problem of being outdated or not, JF6 and that I said above worked fine before...
FYI, I was using Slim 4.2.2 build 2.5 when I got the trouble, maybe there is something special I don't know when downgrading to GB?
Regards!
--------
Found the link:http://www.mediafire.com/?zqpip6uac4n7ov7
qaler2010 said:
Thanks again for your quick reply.
Now I have only found one kk4 with bootloader download link in hotfile.com, which is currently not banned in my country...
So would you please be that kind to post another download link like in mediafire, dropbox or googled docs?
But I don't really think it is the problem of being outdated or not, JF6 and that I said above worked fine before...
FYI, I wasing using Slim 4.2.2 build 2.5 when I got the trouble, maybe there is something special I don't know when downgrading to GB?
Regards!
Click to expand...
Click to collapse
JF6 is Froyo, not GB. Therefor, you're flashing the wrong bootloaders. You need the GB bootloaders, hence why I'm telling you to use KK4.
As for links, the only one I have is: http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html - Which is hotfile.com and I can't upload it to my db at work.
BWolf56 said:
JF6 is Froyo, not GB. Therefor, you're flashing the wrong bootloaders. You need the GB bootloaders, hence why I'm telling you to use KK4.
As for links, the only one I have is: http://hotfile.com/dl/137865417/4bc...S_Bootloaders_Re-partition_Full_Wipe.zip.html - Which is hotfile.com and I can't upload it to my db at work.
Click to expand...
Click to collapse
Pretty sure not the issue of bad flash after odining KK4...
I start to believe corrupted, or even worse, dead internal storage causes all the hell....
qaler2010 said:
Pretty sure not the issue of bad flash after odining KK4...
I start to believe corrupted, or even worse, dead internal storage causes all the hell....
Click to expand...
Click to collapse
Sorry but this isn't very clear.. Did you manage to flash Odin KK4 with bootloaders? Did it say complete and reboot the phone? If so, what exactly happened and what exactly did you do?