Related
Case: 1 star
Hello all,
Thought I'd give my input on this case before anyone else buys this thing.
The case as a whole and it's construction/quality is very good, hard durable plastic, good silicon underlay helps protect the back. Overall good quality.
People have mentioned that it's very hard to press the L/R and the volume buttons. I didn't have much of an issue, sure it's harder, but not impossible.
The dust covers on the USB and microphone jack are very good, fits in well, and easy to remove, and put back in.
If this was it, the Otterbox case would be great and get 5 stars.
So why then am I only giving this case 1 star? Simple, two fatal flaws that completely break this case.
1) To the left of the USB port are two clips keeping the top and bottom halves attached, these two clips OVERLAP. Why is this a bad thing? Because they push the screen apart, as well when you move the screen up and down, it will scratch against the gamepad. Over time this could cause some bad scratches or damage to the gamepad.
2) This is my biggest problem. The silicon inlay is too thick. What problem does this present? The clips on the side of the case rely on things fitting perfectly in order to latch onto the phone. Since the silicon is too thick, when the case is fitted, the clips are pushed out too far to properly grab on to edges of the phone. I noticed this when I was using the volume buttons, since I have to push down harder on the volume buttons than normal, because of the silicon, the extra force would push the case apart.
I have called Otterbox, and have twice had replacements sent to me, all had the same problems. I tried taking out the silicon and putting it on, the case fit PERFECTLY. But some of the buttons, power button, volume, L/R buttons are not as easily pressed anymore.
When I called Otterbox the last one, the rep made mention that it is an older phone and wasn't sure if they ever intended to fix the problem. He didn't say it, but you could tell what he was thinking.
These problems have existed since the case was made, theres no reason the problem should still exist. So they never intent to do anything, and anyone already with the case is forgotten about.
This is the second Otterbox case I have had problems with, my other was my Xperia X10 Impact case. I won't be buying any more Otterbox cases.
Just thought I'd share this in case anyone was even considering the Otterbox case for their Play.
When I get some money, I'll be trying out a Trident case.
Thanks for the review, I found it helpful.
I had an otterbox case on my old phone and it was awesome. Soon as I bought this phone last August I bougt an ottetbox case. Piece of crap for the same reasons you described thankfully I was provided and refund and got to keep the case, which sits in its box since August. Again stay the hell away from otterbox for this case is worthless and junk. I have never tried another case. However I do keep a nice otterbox screen shield on for good measure. That works well too bad I can't say the same for the case.
Sent from my R800x using xda premium
you are much better off with a trident aegis. In my view the best case on the market for play. If you don't have the dough get a cheap £3 gel case from ebay. Don't buy an acrylic case as they dont fit well or last long.
I have a £30 otterbox discarded somewher in my office. Waste of money
Good luck trying to get it to stay with an invisibleSHIELD on also
Sent from my R800x using XDA
i bought a trident case for my play.
Best decision ever.
Perfect fit and buttons are very easy to press.
The only bad thing is that there are no dust covers for the ports and the shoulder buttons are exposed, but that shouldnt stop you from getting this case.
You will enjoy it.
here in the Philippines, otterbox staff are also expert dickheads.. they're arrogant
This is the best Xperia Play case you can buy. I've got one and it's awesome !
It puts aside any of your trident cases.
http://www.fommy.co.uk/view-full-page.php?skuno=91144
sufy1000 said:
This is the best Xperia Play case you can buy. I've got one and it's awesome !
It puts aside any of your trident cases.
http://www.fommy.co.uk/view-full-page.php?skuno=91144
Click to expand...
Click to collapse
neh, looks like those cheap $2 worth sold in fake accessories shops here in the philippines.. wearing them only degrades the phone.. trident is still the best, both in protection & aesthetics..
narflynn619 said:
neh, looks like those cheap $2 worth sold in fake accessories shops here in the philippines.. wearing them only degrades the phone.. trident is still the best, both in protection & aesthetics..
Click to expand...
Click to collapse
Doesn't degrade the phone at all. Its see through and looks nice. It's made out of plastic though.
sufy1000 said:
Doesn't degrade the phone at all. Its see through and looks nice. It's made out of plastic though.
Click to expand...
Click to collapse
It destroyed my front glass and back battery cover.
Sent from my R800x using XDA
savage24x said:
It destroyed my front glass and back battery cover.
Sent from my R800x using XDA
Click to expand...
Click to collapse
Did you drop it ?
Yeah, it's see-through. That's what makes it look cheap & degraded. As I said, it looks like those $2 worth cases sold by street vendors.
---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------
Trident FTW! :-D
narflynn619 said:
Yeah, it's see-through. That's what makes it look cheap & degraded. As I said, it looks like those $2 worth cases sold by street vendors.
---------- Post added at 10:28 PM ---------- Previous post was at 10:26 PM ----------
Trident FTW! :-D
Click to expand...
Click to collapse
Well I have to say it doesn't look cheap or degraded. It fits perfectly well and does a good job of protecting the phone.
And the reason why I bought this case is because it's see through and I have a white Xperia Play so it looks awesome !
sufy1000 said:
Did you drop it ?
Click to expand...
Click to collapse
Nope.
Sent from my R800x using XDA
My OtterBox broke, they sent me a new one
Sent from my R800x using XDA
savage24x said:
Nope.
Sent from my R800x using XDA
Click to expand...
Click to collapse
Then how the hell did it destroy your front glass and battery cover ?
sufy1000 said:
Then how the hell did it destroy your front glass and battery cover ?
Click to expand...
Click to collapse
The clear plastic one wasn't sanded or clear coated and I didnt realize it.
Sent from my R800x using XDA
I have a Trident case for mine. I read too many bad reviews about otterbox that so i went with Trident. It does a very good job of protecting my phone and makes it have some grip so you don't drop it so easily.
I think the Otterbox was redesigned, because I experience NONE of this "clip overlap" issue that I read about. I received mine today and did not even know people had any issue until reading some reviews. I carefully inspected mine and it is flawless. Nothing rubs or scrapes at all. It is smooth as butter. Nor is it "falling off" like others claim. The volume controls are actually easier to volume up and down now, and while yes, there is a little more push involved with the trigger buttons, it is not so much that I cannot push them. It is great to know they are sealed from dust/grime/crap.
I cannot say anything wrong with this case at all. There are cutouts as well for the speakers, and I noticed some reviews said that there were not. I think the case has been re-done, because none of the reviews/reports reflect my case at all??
EDIT: I think I figured it out. If you put the top portion BACKWARD, the tabs overlap each other. You must ensure to put it on the RIGHT WAY and it will not scrape, etc. Wish they were a little more informative and let you know the correct method on the package. I did not put it on the wrong way, but after looking it over I can see how someone can do this and experience what the original reviewer did. When installed the correct way, *nothing* rubs.
Hey saw this and thought you case hunters would like to check it out.
I am going to order one next week. They look super awesome and are only 14 bucks.
http://www.ebay.com/itm/Nillkin-TPU...ccessories&hash=item35bec3a4cd#ht_9605wt_1265
Got some pictures for you, Oh and it comes with a screen protector also.
[email protected] said:
Hey saw this and thought you case hunters would like to check it out.
I am going to order one next week. They look super awesome and are only 14 bucks.
http://www.ebay.com/itm/Nillkin-TPU...ccessories&hash=item35bec3a4cd#ht_9605wt_1265
Got some pictures for you, Oh and it comes with a screen protector also.
Click to expand...
Click to collapse
I saw this too, the other day. Couldn't work out whether it was just posh photography or whether this case actually will be better quality. Let me know how it is when you get it!
You say its the best tpu case so far but you haven't even ordered it yet..?
Sent from my Nexus 7 using Tapatalk 2
ikn0wagh0st said:
You say its the best tpu case so far but you haven't even ordered it yet..?
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
That's XDA for you. Posts like that plague almost every forum here lol. -_-
This is the fourth or fifth thread in this forum in the last week about this particular case, and they've all been from people who haven't ordered them.
I'd almost think the creator was trying to spam the site and drum up some business... but I'm naturally paranoid. Anywho, buy one and test it before you put up another redundant thread!
-Ara
I sure do like that baby blue color though... I'd order one for half the price! :angel:
I ordered this the day it was made available by nillkin about two weeks ago. I should be getting it any day now but judging my the nillkin case I use on my Galaxy Nexus I'm pretty confident it should be a quality case. Will update once I get it.
Sent from my Nexus 7 using xda app-developers app
i would pay extra if it doesnt come with that stupid logo
Sent from my Nexus 7 using xda app-developers app
I saw this and just by looking at it, it seems pretty nice and high quality. A lot of the TPU skins are just S or X cases. That arent to nice. This is unique and the baby blue is nice.
I will order and post pictures when I receive it.
I was just trying to let everyone know about the cool case I found
How does that Msrware case in any way equate to a TPU cover?
/edit, just realised he's a spammer.
A spammer? Man tough crowd, this is like one of my first actual posts cus I thought the case looked cool. Chill damn. Looks like Im never gonna post a thread again. I just was trying to get the word out. I will post pictures when I get the case...
Troute said:
How does that Msrware case in any way equate to a TPU cover?
/edit, just realised he's a spammer.
Click to expand...
Click to collapse
I am a spammer? Please dont tell em your calling me a spammer? I am posting a thread about a case. Thats all. If you dont like it leave. I thought it was cool looking so I posted a thread. I have been part of XDA now for 2 years. My activity has been minimal but when I actually think to post something I get called a spammer?
Not cool man!
I will post pictures when I get it I ordered the See through and Baby Blue.
ASSMO said:
I am a spammer? Please dont tell em your calling me a spammer? I am posting a thread about a case. Thats all. If you dont like it leave. I thought it was cool looking so I posted a thread. I have been part of XDA now for 2 years. My activity has been minimal but when I actually think to post something I get called a spammer?
Not cool man!
I will post pictures when I get it I ordered the See through and Baby Blue.
Click to expand...
Click to collapse
The post he's talking about is now deleted, and the poster is gone. These folks aren't necessarily talking about you. This same case has been posted multiple times by actual spammers, and your topic states "Best TPU Case so far" though you don't have it yet. By your activity on the site it's obvious to me that you're not spamming, though.
Oh ok, Sorry for my ignorance. I didnt know. But I will post pictures when I get it. I shouldnt have posted about this and named it best TPU case when i havent even received it yet. Sorry again community. My bad lol. Also I checked the first couple pages and didnt see a post about this case so I said Ill do it myself then lol.
LouZiffer said:
The post he's talking about is now deleted, and the poster is gone.
Click to expand...
Click to collapse
This ^ thank you Mr Ziffer
Has anyone bought and received this case yet??
My case finally came after 3 weeks. I have a Nillkin case and screen protector on my Galaxy Nexus so I was expecting the same type of quality.
It's a great case and exactly what I expected.
The screen protector is cut very, very close so if you don't get it spot on, you will be getting bubbles anywhere it goes over the edge. I got it virtually perfect but had minor bubbling over one corner and the anal person in me just couldn't stand it so I simply sliced a little bit off with a pair of scissors and now it's perfect. It comes with a cloth and also a large sticker to remove dust particles stuck between the protector and screen during installation.
The case itself is glossy but tactile offering a good grip. It's neither particularly a fingerprint or dust magnet which is good. The 2 long edges are textured which I thought from the picture would have added more grip but it's actually the opposite. That's actually a good thing though allowing your fingers and hands to slide along the edges with ease when interacting with the screen instead of getting stuck. The fit is snug and does not cause the screen protector to lift up. The cutouts are big (for all the various holes plus the power/volume) so it should be no problem with various headphones or USB wires. It doesn't add much thickness to the device but still offers enough protection from scratches and minor bumps.
I could add pics but the ones from the website are accurate and do the case justice: http://www.nillkin.com/En/ProductView.asp?ID=2875
I got the black one and it looks really nice, especially from the front straight on as the case covers the silver bezel making the entire front all black. I definitely recommend this case. If anyone has any questions, I'll be happy to answer any.
Hwaiting said:
My case finally came after 3 weeks. I have a Nillkin case and screen protector on my Galaxy Nexus so I was expecting the same type of quality.
It's a great case and exactly what I expected.
The screen protector is cut very, very close so if you don't get it spot on, you will be getting bubbles anywhere it goes over the edge. I got it virtually perfect but had minor bubbling over one corner and the anal person in me just couldn't stand it so I simply sliced a little bit off with a pair of scissors and now it's perfect. It comes with a cloth and also a large sticker to remove dust particles stuck between the protector and screen during installation.
The case itself is glossy but tactile offering a good grip. It's neither particularly a fingerprint or dust magnet which is good. The 2 long edges are textured which I thought from the picture would have added more grip but it's actually the opposite. That's actually a good thing though allowing your fingers and hands to slide along the edges with ease when interacting with the screen instead of getting stuck. The fit is snug and does not cause the screen protector to lift up. The cutouts are big (for all the various holes plus the power/volume) so it should be no problem with various headphones or USB wires. It doesn't add much thickness to the device but still offers enough protection from scratches and minor bumps.
I could add pics but the ones from the website are accurate and do the case justice: http://www.nillkin.com/En/ProductView.asp?ID=2875
I got the black one and it looks really nice, especially from the front straight on as the case covers the silver bezel making the entire front all black. I definitely recommend this case. If anyone has any questions, I'll be happy to answer any.
Click to expand...
Click to collapse
We want pics! Official pictures are never enough, for me anyway.
PeatCoal said:
We want pics! Official pictures are never enough, for me anyway.
Click to expand...
Click to collapse
Here you go (hope this works)!
You gotta love the Google translation:
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
skateboard grip tape.
There are leather back covers on ebay but without NFC. I can do without NFC, so I'm planning to buy one.
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
Try a full body skin. I had a carbon fiber one that added some grip, but removed it. ...I didn't like the carbon fiber around the edges of the phone. I'm currently using the Spigen Matte full body skin. It adds some grip on my opinion, butsome may say it didn't add enough. Just my pinion of course.
Sent from my SCH-I605 using Tapatalk 2
I had used plastidip on my back cover to make it matte black and add grip, it worked well but it's just not durable enough, mine was peeling of within a few days
Sent from my GT-N7100 using xda app-developers app
xtremeguard do front and rear screen protectors.
if you buy 2 or more, you can use the code 85off2 to get 85% off. quite a nice sticky feel too it when used on the battery door and using a bumper case.
I just bought one of those skins, they have one in carbon aand brushed steel from ebay for around 6bucks
egrips...every time
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
First thing I do to any new phone (or laptop) is throw a couple egrip strips on the back... incredible traction...nothing slimmer...never need a case cause it doesnt slip out of your hands!
www.egrips.com
until i found a case i liked, i applied a generic, large, clear Zagg screen protector to the battery cover. i had to use 2 pieces and it was not an exact fit, but there was enough coverage to make it less slippery.
Try using flygrip
Just Google and YouTube "flygrip galaxy note 2".
I've been using this thing for almost a week now on my note 2. It's amazing.
flygrip is to big and doesn't allow the use of a case if needed. Great idea but dumb product for $30
Spray-on truck bedliner haha
Sent from my SGH-T889 using xda app-developers app
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
downtavern said:
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
Click to expand...
Click to collapse
Here you go!
http://www.lowes.com/pd_230659-6115...ip&pl=1¤tURL=?Ntt=plasti+dip&facetInfo=
I wonder how well this color will match the orange flip cover?
http://www.lowes.com/pd_416844-6115...ip&pl=1¤tURL=?Ntt=plasti+dip&facetInfo=
Does this type of spray grip tend to peel or scale easily with everyday usage? I was thinking of something to add more grip to my otterbox commuter case which tends to be on the slippery side. Is it easily removeable if needed and does it attract lint/dirt/etc?
downtavern said:
I used spray on tool grip in clear applied to the back cover. After 5-6 coats its very tacky/grippy and almost invisible. Best thing I've done to the phone yet.
Because of my limited number of posts I'm not allowed to include a link. The company/brand is PLAST-DIP. You'll be looking for the Clear in a spray can. If you'd like to get creative they also offer an assortment of colors and "smokes" that make a translucent effect.
Hope that helps!
Click to expand...
Click to collapse
You can try some gaffers tape, it will make it ugly though, used it on my nikon cameras before felt pretty nice.
I have one of these and I love it.
http://m.youtube.com/#/watch?v=C3hav9esA4U&desktop_uri=/watch?v=C3hav9esA4U
Sent from my SCH-I605 using Tapatalk 2
Lol ive used Plast dip on everything, including my car. Not sure how I feel about spraying my 700 device though. I guess it wouldn't hurt, because they do come off easily
Sent from my SGH-T889 using Tapatalk 2
just get a good case and dont be cheap
brian85 said:
Any ideas? The back of the phone gets very slippery and I hate cases so I'm not going to get one, so do you guys have any ideas on how to add some grip to the back?
Click to expand...
Click to collapse
use stickum
I've got the Case-Mate Tough Case and even though it has the little bump pattern on it it's way too slippery... it's not rubbery feeling like it looks in the pictures...
And I've spent the better part of a week reading reviews and searching and can't find a good answer... So what's the best case for GRIP? Preferably it should give decent protection, not be too big (I don't want something like the huge Otterbox or Seidio Active) and have a lip on the front to protect the screen.. other than that I just want it to actually be GRIPPY!!! This phone is huge (it's awesome, but huge) and I really need some grippiness on the back so that I can one-hand it... I've looked at the Aegis, Ballistic, UAG and others but there are mixed reviews as to the actual feel of the outside. I want something that I can lay it in my hand at a slight angle and it won't just slide off... The Case-Mate really checks all the boxes except for the fact that it's just so dang slippery!!
So if you've personally got a case/used one that you find exhibits exceptional "grippability" then toss a dog a bone and hook me up..
Thanks everyone..
(and if you're in the market for a Case-Mate Tough case then I'll make ya a deal....although it's prolly not worth the shipping..lol)
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
IamPro said:
Not sure but I use a Body Glove and its pretty grippy around the sides (not so on the flat back tho). I remember hearing of some adhesive kind of like Flygrip but cheaper kind of like tape/sticker which you could apply to all kinds of different things altho they made some specifically for phones and other devices to give you a better grip .
Click to expand...
Click to collapse
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
PM me if you really want the Case-Mate, I'll prolly keep it until I find something better though, it's slippery but at least it's protected when it falls.. And yeah, I had a Fly Grip, but I made the mistake of selling it with the phone I had at the time, plus I pocket this slab of a phone and I'm not sure I could handle the extra bump on the back...
No rush I'm just a case hoarder lol. If you find something else hit me up.
Sent from my SCH-I605 using xda premium
Will do buddy....
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Optimistic Pessimist said:
Perhaps take a look at the Ballistic SG http://forum.xda-developers.com/showthread.php?t=2198655
Click to expand...
Click to collapse
One of the few that's actually described as being grippy, that may be the ticket... haha.. thanks
Sent from the future.....
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Phogg said:
I don't think anything comes close to a cheap gel rubber case for sheer grippines. There are any number of brands that can be had for 4 bucks shipped and I keep one around for when I want to sit and read manga.
They suck for sliding in and out of a tight pocket though. There is a point of being too grippy.
Click to expand...
Click to collapse
I went ahead and got a cheapo rubber/silicone case from Ebay.. I figure I can't go wrong trying it when it cost <$6 shipped...
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
I just got this one off ebay I like it so far the black lines are the grips lol.
Sent from my SPH-L900 using xda app-developers app
UCSB said:
I have this case in black (also a couple of other colors). It has grippy ribbing on the sides and the Android logo on the back is matte ... overall a reasonable balance between grip and something that will go in and out of your pocket.
http://www.cruzerlite.com/cases/sam...dified-a2-tpu-case-for-samsung-galaxy-note-ii
Click to expand...
Click to collapse
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
ericrangel76 said:
Have you looked at the Case-mate Pop case? This is probably my favorite case I own. It has rubber grips on both sides of the case, and on the lip in the front. I think this may be what you are looking for.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
The best grippy case and most protective case you will find is I Face case
Sent from my SGH-I317M using xda premium
blakjak220 said:
All yhe reviews on that thing say the kickstand is a POS... is it really that bad?.. I probably wouldn't use it but it would kinda suck if I broke it the 1st time I used it... what's your thoughts on it?
Sent from the future.....
Click to expand...
Click to collapse
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
blakjak220 said:
Does that case have any kind of lip on the front so you can lay the phone on it's screen and it won't touch the surface? I couldn't tell from the pics on that site?
Sent from the future.....
Click to expand...
Click to collapse
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
ericrangel76 said:
The kickstand is kind of hard to use but I hardly ever use it. Honestly that wasn't one of the reasons why I decided to buy the case. I had one of these cases on my BlackBerry Bold 9900 before I bought my GN2. I like that my phone feels solid in my hand, it's not too bulky, it's easy to put on/take off and it offers great protection. I already had one drop when my GN2 fell out of my jacket pocket from about three feet to asphalt and the only wrong was my case had a small scough mark. I like the case. This is just my opinion.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I honestly prolly wouldn't use the kickstand that much either... but it's good to know that it's probably not as bad as some of the reviews..
UCSB said:
Yes, the case has a raised lip around the screen. The lip will keep the screen off a flat surface like a table; it is a significant lip. There are many pictures of this case in the thread where people are showing photos of their cases. Here is a youtube.com video that is pretty good.
http://www.youtube.com/watch?v=IA2SlvLq4sY&feature=youtu.be
Click to expand...
Click to collapse
That looks pretty good.. may have to get one if that one from Ebay turns out to be crap..
joshm.1219 said:
First off I'll take that case mate if you're in North America definitely not worth the shipping otherwise. Anyway I would assume any tpu case is as grippy as you're going to get but there's a protection trade-off obviously. You could try getting a flygrip or a sling grip. I have the fly on my otterbox/zl setup and it's definitely the best one handed solution I just feel super nerdy using it lol.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
blakjak220 said:
Yeah, I thought about getting some of that tape stuff but somehow putting tape on a $500 phone just feels wrong.. but I may have to resort to it...lol.
Click to expand...
Click to collapse
I actually meant (egrips) since I had seen it recommended in another thread here
Hopefully this might be some help