Need help flashed jm8 through Odin, used correct files and have tried with repartition checked and unchecked.
On reboot just get:
E: Cant mount /dev/block/st110
(Invalid Argument)
E:copy_dbdata_media: cant mount DBDATA
copy default media content failed.
When I reboot it turns turns on to the s screen and then goes off again, any advice please?
Hello guys
I seem to have a problem with my GT-I9000M and I need help. Apparently my phone cannot seem to find the internal SD card. Now I'm just wondering if my phone is officially dead. The code is as follows in recovery 2e:
Code:
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
E:copy_dbdata_media:format SDCARD:
Formatting SDCARD:...
format_root_device: /dev/block/mmcblk0p1format_rfs_device -> /dev/block/mmcblk0p1
format_vfat_device -> argv[0] : /system/bin/newfs_msdos
format_vfat_device -> argv[1] : -F
format_vfat_device -> argv[2] : 32
format_vfat_device -> argv[3] : -0
format_vfat_device -> argv[4] : android
format_vfat_device -> argv[5] : /dev/block/mmcblk0p1
run_program: child exited with status 1
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
I've just been reading NOW about the massive FAIL of these phones... I guess I have fallen victim as well?? I just want to confirm if this phone has failed.
Thanks!
Hi,
I got this this msg on recovery:
E:Can't mount /dev/block/stl11
(Invalid argument)
upadate media, please wait...
upadate media, finished
# MANUAL MODE #
--Appling Multi-CSC...
Instaling Multi-CSC
mps_dat value: XEE
copy_multi_carrier from: XEE
multicsc : can not acces to /system/csc/XEE/syst
em/
copy_common_data E:Can't mount /dev/block/stl11
(Invalid argument)
E:Can't mount /dev/block/stl11
(Invalid argument)
I got this msg after my galaxy forced close, I guess it was was stuck on boot, it would not pass the S logo, was showing black screen and it was vibrating once_ pause_ twice every minute. I tried to flash with odin3 1.7 , pit 512, eclair, it worked, canot access market(msg still there), i flashed with froyo xxjpo, same message, and not able to download from market, and not have unmount option on sdcard...
thanks for helping guys, great forum!
try to see if you can format it
if not, then you are potentially looking at a dead internal SD
thanks for ansewer
I tried that it said fromat complete, but i still have the error message! the phone is working fine, other then being able to download from market...
u think that I can replace the sd card?
I had this same error using I think it was JM8 Firmware at the time, try a different firmware, fixed it for me =]
thanks I just flashed
http://forum.xda-developers.com/showpost.php?p=9289959&postcount=1
it's working!
rasdaq said:
it's working!
Click to expand...
Click to collapse
Good good
I have darkys rom 9.1 installed and ive had this issue as ive come up the version as well, for some reason my cache wont format and i think this is causing market issues for me.
When i goto update or download a new app it says downloading for 2 seconds then just disappears.
If i try clear cache in clockworkmod it says
"formatting cache"....
e:cant mount /dev/block/st111
(file exists)
error mounting /cache/!
skipping format...
cache wipe complete
e:cant mount /dev/block/st111
(file exists)
e:cant mount cache:recover/log
e:cant open cache:recovery/log
e:cant mount /dev/block/st111
(file exists)
e:cant mount /dev/block/mmcblk1p2
(file exists)
e:cant mount /dev/block/st111
(file exists)"
Any ideas??
Ok i found a fix. Flash JPC with 512 pit with repartition on, and use the csc file provided in the folder.
Flash, and then you can install the latest roms to get back to normal!
awesomeee
Can you let me know if this works please mate as I have had same issue with the same Tom, even flashed a different Tom and same proven exists now
yep it works! send me a pm if u have any troubles. cheers
Hi all.
I've been looking for answer for the problem that I have for a couple of days.
In short, My I9000 was fully submerged in the water I directly pulled it out (couple of second though) took out the battery and dried it. I've even managed to open the casing separate the main PCB, camera, audio jack, speaker, almost everything that I could do, in order to properly dry it. And I had put it in my camera dry box for couple of days to suck all the humidity which may still left.
As result, when I turn it on It went to boot loop Galaxy S logo on and on. The recovery console and download mode is still alive. I've tried several solution in the forum which include flashing it using odin with custom rom, stock rom, even went back as far as eclair, froyo, GB, was using initial asian rom DXJV9, flashed CSC phone etc. I've tried as far as flashed dbdata.rfs mentioned in another thread.
http://forum.xda-developers.com/showthread.php?t=984140
Also tried to copy some files using adb shell (sdparted and stuff like that), mentioned in this forum.
http://forum.cyanogenmod.com/topic/6433-solved-messed-up-partitions-on-internal-storage/
Now stuck at
E:failed to mount /sdcard (File exists)
E:copy_dbdata_media:Can't mount /sdcard
your storage not prepared yet. Please use UI menu for format and reboot actions.
Meida files copy failed. <<<<< is this really a typo from Recovery console
So Is there any other thing that I can do? does my internal sdcard spoiled? Is it not possible for the I9000 to boot without it's internal sdcard?
Thank you
I had my phone assessed with samsung customer service and they said that it had a hardware problem and must be replaced, first of all it cost S$279 to replace, and they will scrap the old main board. I could not get the old main board for my self, in case it revives back.
Is this true? should I just trust them that my phone was bricked?
Thanks for the response
It should not be hardware problem. I see this error before and solved with install old firmware. Install I9000XXJP1 or older from here I hope this will help you
canbas said:
It should not be hardware problem. I see this error before and solved with install old firmware. Install I9000XXJP1 or older from here I hope this will help you
Click to expand...
Click to collapse
I'll try it as soon as I get my phone back from the customer service. I'll post it as soon as I try it.
Thanks for the response.
I've always found that eclair jm9 will resurrect a soft bricked phone the best. Good luck.
Sent from my GT-I9000 using xda premium
canbas said:
It should not be hardware problem. I see this error before and solved with install old firmware. Install I9000XXJP1 or older from here I hope this will help you
Click to expand...
Click to collapse
After I install it with JP1 (with odin and repartition pit512). it came back to recovery console with this message:
update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed.
<Trying to format internal sd card)
Formating SDCARD:...
update media. please wait
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:
After this I'll try the JP9 or is it JM9?
flashed using JM9:
It came to recovery console, again with new message:
... (too fast, didn't catch what it said)
...
...
E:copy_dbdata_media:format SDCARD:
formatting SDCARD:...
format_root_device: /dev/block/mmcblk0p1format_rfs_device -> /dev/block/mmcblk0p1
format_vfat_device -> argv[0] : /system/bin/newfs_msdos
format_vfat_device -> argv[1] : -F
format_vfat_device -> argv[2] : 32
format_vfat_device -> argv[3] : -0
format_vfat_device -> argv[4] : android
format_vfat_device -> argv[5] : /dev/block/mmcblk0p1
run_program: child exited with status 1
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:copy default media content failed.
E:Can't mount /dev/block/st111 (Invalid argument)
E:Can't mount /dev/block/st111 (Invalid argument)
Please if there is anyone that understand what it means, and what can i do about it, it will surely very helpful, even though eventually i couldn't revive the phone.
Is it possible to access sdcard content from windows while we're in recovery? mount the sdcard manually using adb shell?
I tried :
/ # mount /sdcard
but replied with
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Not sure which to choose
For your case (provided you are root) :
mount /dev/block/mmcblk0p1 /mnt/sdcard
I seem to have the same issue with you and managed to boot the phone after passing a previous version stock rom and using speedmod kernel. However my SD card shows empty after the phone starts. Through adb I did the above mount and managed to mount and see some files in that block device. The strange thing - at least for my knowledge - is the mount filesystem (j4fs) instead of vfat or rfs. Is this something you see as well?
chikiball said:
flashed using JM9:
It came to recovery console, again with new message:
... (too fast, didn't catch what it said)
...
...
E:copy_dbdata_media:format SDCARD:
formatting SDCARD:...
format_root_device: /dev/block/mmcblk0p1format_rfs_device -> /dev/block/mmcblk0p1
format_vfat_device -> argv[0] : /system/bin/newfs_msdos
format_vfat_device -> argv[1] : -F
format_vfat_device -> argv[2] : 32
format_vfat_device -> argv[3] : -0
format_vfat_device -> argv[4] : android
format_vfat_device -> argv[5] : /dev/block/mmcblk0p1
run_program: child exited with status 1
E:Can't mount /dev/block/mmcblk0p1
(No such file or directory)
E:copy_dbdata_media:Can't mount SDCARD:copy default media content failed.
E:Can't mount /dev/block/st111 (Invalid argument)
E:Can't mount /dev/block/st111 (Invalid argument)
Please if there is anyone that understand what it means, and what can i do about it, it will surely very helpful, even though eventually i couldn't revive the phone.
Click to expand...
Click to collapse
I am having the exact same issues and I have tried all the possible ROMS out there and flashed with 512.pit and 803.pit.... nothing seems to resolved the problems... I even tried to flash speed mod kernel and it also cannot format the sdcard...
How can i mount the sd card??
Any solutions????