URGENT ATT Captivate Rogers Help ROM - Captivate Q&A, Help & Troubleshooting

I posted in another section but there were no replies. Here's another one: (Sorry)
Hi, I bought my Samsung Captivate in December from Rogers Canada and I decided to flash to Att Froyo 2.2 since I wanted the latest version.
Unfortunately, because I'm a dumb noob, I can't seem to root, uninstall any Att crap, or do anything. I've tried doing the root applications, but it doesnt work (gives error message on Download mode).
I really want to take advantage of my phone (hoping not to make stupid mistakes again) so it would be awesome if someone could show me how to downgrade back to Rogers 2.1, remove the ATT startup screen and upgrade to Gingerbread 2.3, step by step. This would be very appreciated.
I've left my number 7789987933 just in case if this is too complex. Thanks

kooldc20 said:
I posted in another section but there were no replies. Here's another one: (Sorry)
Hi, I bought my Samsung Captivate in December from Rogers Canada and I decided to flash to Att Froyo 2.2 since I wanted the latest version.
Unfortunately, because I'm a dumb noob, I can't seem to root, uninstall any Att crap, or do anything. I've tried doing the root applications, but it doesnt work (gives error message on Download mode).
I really want to take advantage of my phone (hoping not to make stupid mistakes again) so it would be awesome if someone could show me how to downgrade back to Rogers 2.1, remove the ATT startup screen and upgrade to Gingerbread 2.3, step by step. This would be very appreciated.
I've left my number 7789987933 just in case if this is too complex. Thanks
Click to expand...
Click to collapse
based on your post you dont want gingerbread yet, trust me on that. you should probably use kies to upgrade to the rogers froyo. or flash a custom rom that already has root and busybox and various tweeks. im using andromeda from the armani captivate rom, it's a bit of a memory hog but has all the touchwiz features working like the music player in the notification bar and lock screen and the battery life is amazing.
im not totally familiar with rooting the rogers version or flashing it to stock roger but im pretty sure root doesn't involve download mode. if you do get it rooted you can flash a kernel with cwm recovery and flash a custom rom.

No, download mode should only be used if you're flashing back to a stock rom (such as the I897UCJF6).
The best idea for you to do right now is to run the 'One click root' application that TGA_Gunnman has made.
I'll give you the steps here:
1. Download this.
2. Also install this.
3. Make sure your phone is on USB Debug mode: (MENU > Settings > Applications > Developement > USB debugging = Checked )
4. For Windows x86 and x64 systems make sure that the Samsung Drivers are installed....
If you use a 64-bit Windows, install this.
If you use a 32-bit Windows, install this instead.
5. Extract the contents of GalaxyS_One-Click_Root_All_Models.rar to a folder.
6. Connect your phone to your PC via the USB cable and launch the file "Galaxy_One-Click_Root.exe" file.
7. Click the "One-Click Root" button. This will launch a command shell follow the instructions in the CMD window, and MAKE SURE YOU FOLLOW THESE STEPS CAREFULLY.
If you really do need any further help, just send me a PM... Or alternatively follow the main topic here.

first off, ATT 2.2 hasnt been released yet for captivate (supposedly later today) dont know how you flased it (supposedly). Rogers in canada released it Jan 6. you should have flashed that (rogers boy) if you were going to do stock roms. but you are flasing anyway.. there are plenty of custom roms that are stripped down stock (no bloat just like you were trying to do), or tweaked up. shoulda flashed one of them.
and the only gingerbread roms for captivate are "look a-like" not real 2.3 dont bother.
so, you obviously didnt read enough first but here.....
heres some stuff to get you back
EASIEST: Captivate AIO toolbox (rogers edition)
http://forum.xda-developers.com/showthread.php?t=944418
some info so you know what youre doing:
http://forum.xda-developers.com/wiki...96#Custom_ROMs
Rogers 2.1 stock rom
http://www.megaupload.com/?d=TT4RYLDZ
Rogers 2.2 stock roms
http://forum.xda-developers.com/showthread.php?t=905042
alternate download
http://forum.xda-developers.com/show...&postcount=673
some info if you have installed 2.2 and now have e3 recovery and are having trouble installing clockwork recovery mod, where it fails verification check
http://forum.xda-developers.com/showthread.php?t=909213
and remove your phone # dumby,

Related

[Q] Can't root Bell i9000M

Hey,
First of all, I tried to find the answer tot he problem in the forums before posting but I was unsuccessful.
I am having some trouble rooting my Bell i9000M. It came with Froyo when I recieved it. I tried androot, z4root, and SuperOneClick but they all failed. In my forum research I came across some comment that said z4root does notwork with the UGJK4 version.
I am restricted to 2 computers, a Mac and a laptop running Ubuntu Linux, so it'd be difficult for me to use Kies for anything.
What is my next step in rooting the phone?
I also tried to flash a kernel, which I read I can do without root access usining heimdall but this error occured: unknown required load command 0x80000022.
My phone is able to do into 3-button recovery and download modes.
Thanks in advance for your help.
Alex.
edit: spelling
Upgrade to Jl2 use superoneclick it works.
Sent from my GT-I9000 using XDA App
have done a lot of reading over the last week trying to work out how to root my SGS i9000M, checking both these forums as well as android & phandroid, as well as googling the issue and trying the Market. I've also checked out many youtube videos on this topic but they seem out of date now. I note the most recent thread on here by liv4air (march 2011) but it doesn't really help with my query.
I am a total noob with regard to this - only heard about rooting a couple of weeks ago but I definitely like the idea. My 1st handset had to be replaced due to a sound issue (it had 2.2 Froyo) - was replaced with a handset sourced for Canadian market (linked to Bell - has lots of stock apps from them that are useless to me). I'd like to get rid of them to start with, but this handset is running Eclair 2.1 - didn't realise this for awhile after it was replaced and didn't actually understand the differences between the builds and firmware.
So now i've got GT-i9000M, Eclair.UGJH2
kernel [email protected] #2, firmware version 2.1-update1 (updated via Kies).
I have tried the one click root download which put the 'update.zip' file on my SD but when I tried to install this in the recovery mode (have discovered that I have the download and recovery mode buttons - also totally new to me!) there was a red error message:
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
Have seen the Ryan ZA OCLF in Market too, but understand that the 'rooting' ability has been removed from that app.
Have downloaded the Odin3 program to maybe try to root it via this method but am confused about how to get kernels/which ones to get...or even if that's what I have to do! can find various kernels etc at SamFirmware but not really sure how to use them.
Am I even close to working out how to root this phone!?
Please help!
Flash EZbase : http://forum.xda-developers.com/showthread.php?t=991792 with odin. All the instructions you need are over there.
It's a complete, stock rom except for a few modifications (such as root and cwm recovery), you can choose to download froyo or gingerbread depending on what you want to flash next, if you do.
(Froyo is the 2.2 android OS that has more stable custom roms/kernels while Gingerbread is the new 2.3.3)
Also since you're on a i9000m, you may want to flash a "i9000m" modem (with the 850mhz band) found here: http://forum.xda-developers.com/showthread.php?t=876391 after flashing, but it's not necessary.
Thanks for that link - it looks promising so i'll read through it properly and give it a go soon. I can't query to that forum as it's a development thread but a couple more queries...just want to make sure i don't do anything stupid!
The instructions state: Download all the EZOdin, EZbase CSC, PDA, PHONE and PIT if you do not have Samsung Kies installed, The Samsung USB Drivers will be required to.
Do you know if this means to download ALL those things if I don't have Kies installed, or just PIT if I don't have Kies installed? I do have Kies installed so not sure which of the above I require.
And on the Kies topic, it also states: If Samsung Kies is used please make sure you kill all Samsung Kies related services that are running (kies, tray agent, etc.)
sorry if i'm making you smack your head in disbelief at my ignorance, but does this mean I can use Kies to flash a kernel to my phone (and hence not need the above)...or that when using EZOdin to flash my phone, I need to make sure I have Kies completely shut down during the process?
And I assume by having Kies on my PC, I do not need to download the samsung USB drivers.
Thanks!
What the first sentence means is that you will need the usb drivers if Kies is not installed. There's a period missing I guess.
For the second one, it means you need to close Kies completely before flashing.
Thanks!
Got EZOdin, and the PDA/PHONE/CSC files, but when I click on the EZBase pit file this is all that's written on the page it opens:
v˜4
Edit: don't know why the rest of my post wouldn't complete above, but no luck in downloading the EZOdin.pit file, either at home (or now here at work).
Any thoughts? Reiterating my noob knowledge (or lack thereof) - I assume the .pit file is crucial to the process? Is there anywhere else I get this file, or another .pit file that will suffice?
Maybe i'll do some reading on PIT....
Rooted successfully!
been a bit of a task over the last fortnight trying to work out the ins & outs of rooting, the ways to go about it and to find a method that worked, which i've finally done.
this is really just a post in case anyone in a similar position and feeling as lost as i was along the road to discovery might benefit from how i managed it.
(and this assumes you've already read the many disclaimers out there about bricking your phone, & making sure you do a lot of reading of the threads on this topic)
i ended up using shortfuse superoneclick. got the program from shortfuse.org - v1.9. i downloaded it and ran it with my anitvirus turned off. It worked fine as per the instructions on the website (shortfuse.org) or in the thread here.
Bell Galaxy Vibrant i9000M
recently upgraded from 2.1 to 2.2 via Kies
UGKC1
kernel 2.6.32.9 [email protected] #4
...now to do some proper exploring and fun!
Well done, take your time and,welcome to the world of fast galaxy s!!
Sent from gt i9000 insanity 8.5/fugumod
see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions
lgsshedden said:
see these instructions: http://touristinparadise.blogspot.com/2010/11/samsung-galaxy-s-how-to-install.html
good kernel, root, cwm and excellent, clear instructions
Click to expand...
Click to collapse
Now rooted and have gone and obtained TiB, Terminal Emulator, Wireless Tether and Root Explorer.
Had the speedmod kernel downloaded and was going to try to flash it to my phone via Odin as per the link you provided but wasn't sure if the kernel itself would root my phone and didn't get replies for my query about that.
So...now that i'm rooted you would still recommend flashing the speedmod kernel? I would assume mainly for the benefits of the kernel itself? Any likelihood of problems arising, having already rooted with SuperOneClick?
Thanks for your advice - the speedmod does sound good and have heard many happy reports from users.
yes it would have rooted you hence my suggestions for using it: sorry to have not been more clear
yes the speedmod kernel would be an upgrade over the stock one but my signature indicates what I use now: very fast and outstanding, not available on xda
I was never able to get oneclick to work as it was blocked on my pc, so my solution stemmed from having to find an alternate answer to a problem like yours
its fun once you get started: lots of help, even more opinion!

[Q] Root GT-I9000M Noob

Alright so after 2 days of researching and getting ready to root my Samsung Vibrant, I've realized since I'm in Canada it's considered a GT-I9000M.
Carrier: Virgin Mobile Canada (Essentially Bell)
Firmware: 2.2
Baseband: I9000UGL2
Kernel: 2.6.32.9 [email protected] #3
Build: FROYO.UGJL2
Phone is compatible of going into recovery (3E) and Download mode.
Been reading a lot of issues with one click so I found a noob guide by user s15274n http://forum.xda-developers.com/showthread.php?t=849028 that seemed pretty easy. Was going to use odin to bring back firmware to 2.1 stock JFD (t-mobile) and then root with update.
Now since I don't even know if I'm considered a vibrant or not and what would happen if I use T-mobiles stock on my Bell phone I'm back to being mind ****ed on this rooting stuff.
Anyway I'm hoping someone can point me in the right direction.
Thanks
I am in the same boat
Dude, you just explained my situation. I have a Sasktel Vibrant and have been looking into rooting this darn thing for a while. Unfortunately, it at least appears more complicated for us with our different(?) phones. Our phones are almost the same one, unless you made a spelling error in your baseband version. Mine has a j in it. Here is my info:
Carrier: Sasktel
Firmware: 2.2
Baseband: I9000UGJL2
Kernel: 2.6.32.9 [email protected] #3
Build: FROYO.UGJL2
I did find this article here that appears promising:
androidforums dot com/galaxy-s-all-things-root/264530-flashing-darky-v9-gt-i9000m-minimal-risk.html
but I haven't convinced myself that it will work, and I sure as **** would hate to brick my phone over something silly. Lemmie know if you find something.
The easiest way to root is to use odin to flash a kernel that roots your phone. Check the development section. I'd recommend using speedmod's kernel-good kernel, and easy to follow instructions.. I'm running a i9000m as well, on SaskTel.
have done a lot of reading over the last week trying to work out how to root my SGS i9000M, checking both these forums as well as android & phandroid, as well as googling the issue and trying the Market. I've also checked out many youtube videos on this topic but they seem out of date now. I note the most recent thread on here by liv4air (march 2011) but it doesn't really help with my query.
I am a total noob with regard to this - only heard about rooting a couple of weeks ago but I definitely like the idea. My 1st handset had to be replaced due to a sound issue (it had 2.2 Froyo) - was replaced with a handset sourced for Canadian market (linked to Bell - has lots of stock apps from them that are useless to me). I'd like to get rid of them to start with, but this handset is running Eclair 2.1 - didn't realise this for awhile after it was replaced and didn't actually understand the differences between the builds and firmware.
So now i've got GT-i9000M, Eclair.UGJH2
kernel [email protected] #2, firmware version 2.1-update1 (updated via Kies).
I have tried the one click root download which put the 'update.zip' file on my SD but when I tried to install this in the recovery mode (have discovered that I have the download and recovery mode buttons - also totally new to me!) there was a red error message:
E:Error in /sdcard/update.zip
(status 7)
Installation aborted.
Have seen the Ryan ZA OCLF in Market too, but understand that the 'rooting' ability has been removed from that app.
Have downloaded the Odin3 program to maybe try to root it via this method but am confused about how to get kernels/which ones to get...or even if that's what I have to do! can find various kernels etc at SamFirmware but not really sure how to use them.
Am I even close to working out how to root this phone!?
Please help!
did you try to flash a kernel and root your phone from recovery ?
biscuit26 said:
did you try to flash a kernel and root your phone from recovery ?
Click to expand...
Click to collapse
no I haven't - the only thing i've tried is the one click root method which brings up a box offering "root or unroot" and this is what put the 'update.zip file on my sd. In recovery mode I scrolled down to the update sd option (below reboot and above the reset to factory etc options - ie. 2nd of 4 options) and that is what led to the error message. Have seen this on other threads so assume it's an old technique that won't work on my handset?
I have Odin v3 and get open the program ok - at least so it looks like the screenshots i've seen posted in forums - but I haven't downloaded any kernels yet. This is the next step i assume. Have found some on Samfirmware.com (including one for my very own build) but no idea which of those i need eg if i download the one for my phone will that just be the same as what i've got now? How would i know if one contained a root? And once i download it do i have to save it to any special location in order to use it / when i open Odin will it automatically pop in as a kernel to flash?
if you are just looking to root.... on any 2.2 just download superoneclick program, make sure you are in debug mode, plug your phone in, hit start, 20 seconds later you are rooted... lots of videos on youtube fyi
dlockhart said:
if you are just looking to root.... on any 2.2 just download superoneclick program, make sure you are in debug mode, plug your phone in, hit start, 20 seconds later you are rooted... lots of videos on youtube fyi
Click to expand...
Click to collapse
For now am just looking to root safely. 2nd step would be to play around a bit and look at other kernels/ROMs etc that would suit me, and upgrade firmware to either Froyo or Gingerbread...but all that other stuff is gonna require a lot more reading on my part before 'playing' as i've come across loads of threads describing various errors/problems people are having after flashing this or that.
i've been told to use lots of different methods eg. the superoneclick that you mention, Darky's 9.5, EZBase/EZOdin, using Heimdall etc etc and just as i think i'm onto something good, anothe method is advised. You mention on 2.2 but i'm on 2.1 Eclair - will the superoneclick method still work do you know?
I do not know if it will work with 2.1... i highly suggested upgrading to 2.2 your local mobile phone provider should do it for you if you take it in, it takes them like 30 mins maybe (just take it in with a full battery) other option is to download Kies which is free online provided by samsung, it should upgrade you to 2.2
I think if you can find z4root.apk in the forums or on google it used to be able to root 2.1
there maybe another version of OCLF with root option around in the forums or google.
I still suggested you upgrade to 2.2
dlockhart said:
if you are just looking to root.... on any 2.2 just download superoneclick program, make sure you are in debug mode, plug your phone in, hit start, 20 seconds later you are rooted... lots of videos on youtube fyi
Click to expand...
Click to collapse
managed to upgrade form 2.1 to 2.2 via kies at last - didn't work a few weeks ago but worked the other day. so....back to trying to root! downloaded the superoneclick v1.9.1 - my antivirus did freak at it but i see that that's expected.
problem - when i open the rar file or try to extract the contents or run the application inside an error screen comes up saying there was 'unexpected end of archive' and that 'the achive is damaged or corrupt'.
could this be because my antivirus program did something to it? should i try to download the file again with my antivirus turned off?
terranq said:
The easiest way to root is to use odin to flash a kernel that roots your phone. Check the development section. I'd recommend using speedmod's kernel-good kernel, and easy to follow instructions.. I'm running a i9000m as well, on SaskTel.
Click to expand...
Click to collapse
i'll have a look at that section and at speedmod. just a quick Q though about flashing via Odin - is a kernel composed of the pit file and the 3 other files for pda/csc and modem ie would i expect to get ALL those components and put them in the relevant boxes in Odin? (I have Odin and can open it fine - have not connected my phone yet to check that the yellow box confirms connection).
Still struggling to find the easiest/safest way to root!
a kernel is only a zImage file. It is TARed to that you can flash it as PDA in odin. No PIT.
Go to the ezbase thread, read the comprhnsive instructions and go for it!
Sent from my GT-I9000
>>>Go to the ezbase thread, read the comprhnsive instructions and go for it!
Do you have a link for that?
I am in the same boat. I dl'ed oclf from the market and it doesn't root any more.
I tried the update.zip method and when I did "adb reboot recovery" my vol buttons allowed me to select "apply sdcard:update.zip" but when I press the power key it doesn't execute the process.
samsungvibranthacks.com/samsung-vibrant-hacks/how-to-root-samsung-vibrant-galaxy-s/
In the comments of the above article I tried the following process but in step 11/12 I couldn't get into recovery mode.
samsungvibranthacks.com/samsung-vibrant-hacks/how-to-root-samsung-vibrant-galaxy-s/#comment-248
So I am trying to unlock this phone and I understand I have to root it first?
bob.
slaphead20 said:
Go to the ezbase thread, read the comprhnsive instructions and go for it!
Sent from my GT-I9000
Click to expand...
Click to collapse
Tried EZBase too last week. No joy there either. Got the EZOdin, the PDA/CSC/MODEM files but could not get the .pit file - the link just goes to either a blank webpage on 2 different computers, on my macbook it goes to some webpage which only displays about 3 lines of gibberish - some complicated looking code.
I assume I need all the components? I've noticed the speedmod kernel only requires the PDA .tar file (this looked the most promising method recently but not sure if that kernel will actually root, or if i need to be rooted first in order to flash it via Odin).
Oh, the other problem with EZBase I found was that the PDA/CSC/MODEM files downloaded as .tar.md5 files
...shouldn't they just be.tar? Did I do something wrong/can I just rename them .tar? Hence my reasons for abandoning the EZBase method as haven't had any joy answering those questions!
You wouldn't think a phone should be all that hard to root?
It's not hard to root. I have the i9000M on stock UGJL2 (Froyo) Downloaded SuperOneClick v 1.8 by CLShortFuse from this forum as there are no rooting apps any more on Market. Put my phone in USB debug mode started the program then followed directions. Try here for detailed instructions and a video if you want a preview. The directions are very good though and I chose it because I didn't want to use the 3E method.
CASz said:
It's not hard to root. I have the i9000M on stock UGJL2 (Froyo) Downloaded SuperOneClick v 1.8 by CLShortFuse from this forum as there are no rooting apps any more on Market. Put my phone in USB debug mode started the program then followed directions. Try here for detailed instructions and a video if you want a preview. The directions are very good though and I chose it because I didn't want to use the 3E method.
Click to expand...
Click to collapse
all sounds easy as pie...you convinced me to try again with the superoneclick method. However.....
1. v1.8 is not available via the thread link - only v1.9.1 and drivers for 1.9.1 or v1.7
2. the little youtube vid showing instructions (which also makes it look supereasy) advises to download the latest version, so i downloaded 1.9 - this time i disabled my antivirus in the hope that it would not interfere with the file which is what i assumed happened last time.
3. yet again when i go to extract the files form the .zip file there's an error saying the file is damaged or corrupt so I can't get the application to be extracted.
back to square one. haven't tried v1.7 yet. maybe i'll give that a go, but i assume it will have bugs that are why it's been updated to versions 1.8 and 1.9??
extracting the 1.9 drivers also does not work - "unexpected end of archive"; funnily enough the application does actually appear extracted but when i try to run it as administrator windows says there was an error and forces the application closed.
so no joy at my end with this method!
i'll try v1.7 (just to see if it extracts successfully really).
nope - get this warning when i try to download v1.7
didn't get this even with the 1.9 download when it contained a virus so have elected not to try to get v1.7.
and so endeth the superoneclick method as far as i can tell......
FINALLY!
Success via SuperOneClick after all! Was going nowhere with the links on the xda thread so went to shortfuse.org and downloaded the v1.9 via that site (see attached pic for the link to click on).
It downloads a folder with all the required files/drivers etc. The application is within the folder and it opened fine when run as administrator. Followed the guide which is to essentially just tick USB debugging, not to mount the SD card and clicked "root".
It sailed through the process fine and then asked if i wanted it to install busybox as it was not detected. I did, and it did.
Superuser icon in my application as it ought to be. Didn't have to reboot or anything. Only literally just done it so not sure if there are any bugs/ill effects as yet from having rooted it but will report if i come across any.
go for it bob!

Need help with installing a custom rom.

Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Rhiannon224 said:
What Rom is currently on you phone? Which Bootloaders do you have installed?
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Click to expand...
Click to collapse
Here is the info:
Firmware: 2.3.3
Baseband: I897UCKF1
Kernel: 2.6.35.7-I897UCKF1-CL273832
Build: GIGERBREAD.UCKF1
^ From the looks of what u posted, it looks like u have the leaked i897uckf1 currently on ur phone. If that is the case, then u could Odin the Cognition Beta 2 Kernel and then flash the latest Cog Rom (having already copied it to ur internal sd).
Just flash the kernel through Odin then use button combo (volume +/- and power...release after u see the at&t screen) to get into CWM 4.0.0.5 and flash Cog 5 v 1.00 from there.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Are you plugging into a usb port in the back of your pc? Also, there are several methods for flashing back to stock now, once you upgrade to GB bootloaders you don’t ever want to use the Odin with the button fix because it will only flash the secondary bootloader and the primary bootloader will remain GB and the result will be a hardbrick. Also, some of the newer builds came with Froyo installed and using the older 1 click Odin by DesignGears will put those devices in a bootloop. So it really is dependent on your device and your needs. I now use the method outlined in the Continuum 6.1 thread which will not touch the bootloaders and brings you safely back to 2.1 stock. I always clear user data and cache in recovery, flash back to stock using Cezar's method (not a 1 click) prior to flashing a new Rom. Most devs recommend flashing to stock first because there is less chance of corruption.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
http://www.youtube.com/watch?v=UOyx5JQ_8_I
MobileTechVideos video is how i flashed my first gingerbread ROM. Its easy, straight forward and he has all the links you will need under the video.
piece-a-cake
Gupone said:
Please help!!! I have searched and searched and searched the forums and have come across so many threads on how to add a custom rom to your Captivate.
To start, what I have been trying to do is add a custom rom after upgrading my phone from ver 2.2 to 2.3.3 GB. Some posts say you can just upgrade with the 2.3 on the phone, other posts say you need to take the phone back to the stock 2.1 rom. Then you find posts that say, make sure you have the stock bootloaders and kernals when you downgrade to the stock 2.1.
You can easily see how even a somewhat above novice can get confussed. To take my phone back to 2.1 I have followed posts that say use Odin 1.3. I have used odin before so no big deal. However in this case again you are getting different opionions and versions on this. Some have just the odin .exe and others have the .exe and the MD5 and .ini it the package. I am assuming that the one with just the .exe has everything built in as the size is quite big.
I have tried both ways and after I "Flash" it will not finish with the normal recovery mode and see the linux script. It will go to the ATT window and just keep rebooting over and over. I then will use my JIG and get back in download mode in order to reflash back to 2.3.3 just to get the phone to work again.
Can someone please give me a clue as to what I am doing wrong or direct me to the proper files and maybe some better step by step instructions.
Thanks in advance for the help.
Click to expand...
Click to collapse
Listen, I'm new at this and learned watchin mobiletech videos from youtube. At first I found it hard but now is pretty easy (in my opinion). The first thin I do is back up apps with titanium and paste to my laptop (for me is faster to install them back), go back to stock 2.2, master reset using dialer (no odin), root, reboot, install rom on sd card, using odin i install bootloaders (I9000), flash talon kernel (odin), flash rom (CWM) and reboot. That's how I do it. Now, I could b wrong but doing it that way, in that pattern works for me. Like I said, I'm new at this but trust me....I've done it several times and it works for me. Keep reading and then decide how you want to do it. Good luck..."HONESTLY"!!!
It all depends on where you are now and where you want to go.
Sent from my SGH-I897 using XDA App
I'm new to all of this and have done a good amount of research but seems like the information never ends and there are a few ways to load a custom rom.
Method one
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
Method 2
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
What are the differences? Which one is better?
Seems like the first video is very simple and straight forward?
Am I missing something here? I'm already rooted and used titanium backup.
I'm on 2.2 Froyo and wanting to flash to Firefly 3.0
Thanks!

[Q] Flashed Firefly & CM7 a couple of times, but now I can't root my Captivate

Hi all,
over the last couple of weeks I've been experimenting with Firefly 3.0 on my Rogers I896 Samsung Captivate. Then I put CM7 on the phone, but decided I liked Firefly better so I tried to switch back. Trouble is, it looks like I did something wrong because now I can no longer root my phone. I have searched a lot on line, and tried several root methods including z4root (which is what I was using during the Firefly installs - worked great) and SuperOneClick - no joy. Z4root runs for a few seconds, and finally just returns to the home screen rather than re-booting; and SuperOneClick goes through a lot of commands and finally hangs with the message "waiting for phone" (or something close to that).
I've used Odin 1.81 to flash back to the stock Rogers 2.1 image, then to 2.2. (I used the images from here.) When I dial *#1234# I get CSC="unknown" and when I dial *2767*4387264636# I get PCode = "SGH-I896ZKAATT" but I think this is wrong, I think it should display "SGH-I896ZKARWC". I tried the fix documented here and following this procedure I can get the CSC code to read "I896rwcjl1". But I can't load a custom ROM because none of the root tools will root the device.
One other problem I ran into - don't know if it's related, but I think it is - if I try to set up the stock e-mail client to use our Exchange server, it is not able to connect to the mail server even though I know FOR SURE the credentials are correct. (The same setup works like a champ on other Android phones.) I think that the firmware is sending some phone-related info to a Samsung server to validate the license for the Exchange client software, and this is actually the part that is failing rather than the connection to the mail server.
Can anyone provide some direction to a long-suffering Android noob who just wants his Firefly (and exchange e-mail) back?
Thanks in advance
Just go into download mode, Odin/Heimdall a CWM-based kernel onto the phone, then don't even bother with standard rooting procedures; just reboot to CWM recovery, flash a custom ROM and go.
Flashing to stock is largely unnecessary for this.
Aus_Azn said:
Flashing to stock is largely unnecessary for this.
Click to expand...
Click to collapse
NOT true coming from an aosp rom you HAVE to flash back to stock with either a one click or use a .pit with the firmware .tar. cm7 and miui use a completely different partitioning table if you try to flash a tw rom over them it will not work.
but yes you are right about just flashing a kernel with odin/heimdall that has cwm baked in. no need to root before you flash a rom.
studacris said:
NOT true coming from an aosp rom you HAVE to flash back to stock with either a one click or use a .pit with the firmware .tar. cm7 and miui use a completely different partitioning table if you try to flash a tw rom over them it will not work.
but yes you are right about just flashing a kernel with odin/heimdall that has cwm baked in. no need to root before you flash a rom.
Click to expand...
Click to collapse
I thought he meant oneclicking back to full stock (2.1 or 2.2), which is unnecessary due to bootloader rubbish. 3File to GB is pretty much the only way to go.
Thanks! 2 more follow-up questions
Thanks all for your helpful feedback. Two more questions:
what ROM(s) would you recommend that has CWM built-in?
I'm assuming once this ROM was loaded, I could replace it witl Firefly fairly easily?
Thanks again
embsyntax said:
Thanks all for your helpful feedback. Two more questions:
what ROM(s) would you recommend that has CWM built-in?
I'm assuming once this ROM was loaded, I could replace it witl Firefly fairly easily?
Thanks again
Click to expand...
Click to collapse
a ROM doesnt have CWM built in....a kernel does
READ, READ, then READ some more
please read the new user guide (below in sig)find out what stickies are and find said stickies.
also if needing rogers stock roms (one clicks and non one clicks with pit....) also look in my sig.
they call me mr. rogers.
Thanks for the clarification. I installed CM7 using the guide on their wiki page and everything works.
Sent from my SGH-I897 using XDA App

how to root i896

hey guys just grabbed this samsung galaxy s captivate from a friend whos dad found in las vegas sooo i guess its mine now, i have no plan on using it as my phone just for developement but i see that this is the rogers version (i896 while the at&t is the i897) and the forum only has it for the at&t version so im guessing they can use same root methods and use same roms correct? i see that a 2.3 update rolled out for it via kies but this one is still on 2.1 and i saw you can only root it on 2.1 and 2.2 so im staying here for now, i was guessing that superoneclick or gingerbreak could root this phone so ill try them both. one last question is there a better version of touchwiz ported to it? like galaxy s2-s3 look and feel? if now i was hopeing to get CM 10.1 on it, ccan somone point me in the right direction please?
Edit: i rooted it with z4root and was successful, i tried to get CWM on it but it seems that Rom manager dosent support andrid 2.1, and if i do get rom manager on here is there one for my i896? or do i just use the at&t cwm?
Trozzul said:
hey guys just grabbed this samsung galaxy s captivate from a friend whos dad found in las vegas sooo i guess its mine now, i have no plan on using it as my phone just for developement but i see that this is the rogers version (i896 while the at&t is the i897) and the forum only has it for the at&t version so im guessing they can use same root methods and use same roms correct? i see that a 2.3 update rolled out for it via kies but this one is still on 2.1 and i saw you can only root it on 2.1 and 2.2 so im staying here for now, i was guessing that superoneclick or gingerbreak could root this phone so ill try them both. one last question is there a better version of touchwiz ported to it? like galaxy s2-s3 look and feel? if now i was hopeing to get CM 10.1 on it, ccan somone point me in the right direction please?
Edit: i rooted it with z4root and was successful, i tried to get CWM on it but it seems that Rom manager dosent support andrid 2.1, and if i do get rom manager on here is there one for my i896? or do i just use the at&t cwm?
Click to expand...
Click to collapse
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
thebulletfromhell said:
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
Click to expand...
Click to collapse
as we are speaking i am udating it with kies to the 2.3.3, do i still use this method? (i unrooted just in case)
thebulletfromhell said:
Yes, same device, different branding, better modem/radio. You can flash anything found here, and some from the Galaxy S i9000 section. As for rooting:
1. Grab a kernel for your current ROM version. I think the latest Rogers ROM is KH2, but you'll have to check on that. If you're not on it yet, grab this http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html (pass:sampro.pl), and flash it through Odin(I'm not sure if its included. If its not, google for it. Odin 1.83 or 1.85)
2. Flash it through Odin
3. Reboot into recovery, flash http://downloads.noshufou.netdna-cdn.com/superuser/Superuser-3.1.3-arm-signed.zip
4. You now have root. Mod all you want, and proceed to flash yourself to JB 4.3, or any other version you want
Click to expand...
Click to collapse
i lied sorry it says its 2.2 update, i thought i saw it was a 2.3 update.
Trozzul said:
i lied sorry it says its 2.2 update, i thought i saw it was a 2.3 update.
Click to expand...
Click to collapse
This method works for any and everything. Once you installed it, you can downgrade to Bootloader-less Froyo and Eclair ROM with no issue
thebulletfromhell said:
This method works for any and everything. Once you installed it, you can downgrade to Bootloader-less Froyo and Eclair ROM with no issue
Click to expand...
Click to collapse
I'll do this after school, and so I don't understand this fryo and eclair boot loader thing. Also can you show me the stable cm10.1/10.2 ROM please? I looked on cm and it was messed up for some reason
Careful with flashing ROMs with bootloaders!
Bad flash may brick your phone with no DIY solution.
- Update to 2.3.3 via Kies (install correct Samsung drivers first, follow the instructions)
- Reboot to make sure all is OK
- Go to Download mode, Flash Corn kernel to get CWM (find it in attached guide, read carefully and install correct drivers)
- Reboot to make sure all is OK
- Download CM10.1.2 Stable + Gapps, copy to your Internal storage (not SD card)
- In Recovery, do Factory Reset, Clear cache, Clear Dalvik
- Flash CM10.1.2. stable + Gapps (follow the instructions in the guide, no root needed to flash custom ROM)
- Enjoy rooted Android 4.2.2
https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Best use Windows 7 computer, Apple users report issues.
Val D. said:
Careful with flashing ROMs with bootloaders!
Bad flash may brick your phone with no DIY solution.
- Update to 2.3.3 via Kies (install correct Samsung drivers first, follow the instructions)
- Reboot to make sure all is OK
- Go to Download mode, Flash Corn kernel to get CWM (find it in attached guide, read carefully and install correct drivers)
- Reboot to make sure all is OK
- Download CM10.1.2 Stable + Gapps, copy to your Internal storage (not SD card)
- In Recovery, do Factory Reset, Clear cache, Clear Dalvik
- Flash CM10.1.2. stable + Gapps (follow the instructions in the guide, no root needed to flash custom ROM)
- Enjoy rooted Android 4.2.2
https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1
Best use Windows 7 computer, Apple users report issues.
Click to expand...
Click to collapse
thanks for this! going to update it to gingerbread when I get home, I see that I have to flash a kernel in order to get root and CWM, this would have to be my first time so I hope I don't screw up xD I still don't quite know what kernels are even though I have been rooting/flashing for a long time. I have Hard bricked soooo many of my Samsung devices, like 2 or 3 and I wanted to cry when I bought my GS2 xD.
The good news is that Captivate is hard to brick. The only critical part is bootloaders update. Leave this task to Kies, millions of phones got updated this way (including mine). Yes, there are reports for bricked Captivate after Kies, but hope everything will go smoothly. Just follow Samsung's update instructions. Google what Kies version is recommended for Captivate update (i don't remember, sorry). To update to latest stable CyanogenMod read the guide and follow the instructions closely. You'll find inside the links to one-click Corn kernel update. Careful with Heimdall drivers, they are for a specific USB port (it is explained in the guide). Again, no root is needed for upgrade process, only CWM. CyanogenMod comes rooted. Good luck!
Val D. said:
The good news is that Captivate is hard to brick. The only critical part is bootloaders update. Leave this task to Kies, millions of phones got updated this way (including mine). Yes, there are reports for bricked Captivate after Kies, but hope everything will go smoothly. Just follow Samsung's update instructions. Google what Kies version is recommended for Captivate update (i don't remember, sorry). To update to latest stable CyanogenMod read the guide and follow the instructions closely. You'll find inside the links to one-click Corn kernel update. Careful with Heimdall drivers, they are for a specific USB port (it is explained in the guide). Again, no root is needed for upgrade process, only CWM. CyanogenMod comes rooted. Good luck!
Click to expand...
Click to collapse
alright thanks! hoping nothing goes wrong!, i also saw that it was hard to brick the cappy and theres a mod thought makes it unbrickable or something? would you recommend to use that?
Trozzul said:
...theres a mod thought makes it unbrickable or something? would you recommend to use that?
Click to expand...
Click to collapse
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Val D. said:
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Click to expand...
Click to collapse
i know its 3 years old but i think the cpu is better than my 1 year old lg venice, on minecraft it lags and is like 10fps i get amazing fps on my cappy!
Val D. said:
It's a hardware modification. No use to do it now on a 3y old phone. Just update your phone to a stable Android 4.2.2 build and go light on apps and data. Don't expect much from a single core CPU and limited RAM phone. Nobody ever expected that Captivate Android development will go so far. Use what you got and upgrade the phone when you need more muscle.
Click to expand...
Click to collapse
is this the correct stable CM10.2 rom? http://download.cyanogenmod.org/?type=stable&device=captivatemtd
Trozzul said:
is this the correct stable CM10.2 rom? http://download.cyanogenmod.org/?type=stable&device=captivatemtd
Click to expand...
Click to collapse
CM10.1.2 Android 4.2.2. is the latest Stable release. Don't get confused with CM10.2 Android 4.3 Beta.
Val D. said:
CM10.1.2 Android 4.2.2. is the latest Stable release. Don't get confused with CM10.2 Android 4.3 Beta.
Click to expand...
Click to collapse
Yay it worked thank you so much I'm enjoying every bit of it, one last question though xD I noticed this even without it being rooted and its doing it now, the WiFi signal on the status bar is always on the bottom two signals, this doesn't happen with my tablets, I don't see it taking a bit for stuff to load.
Trozzul said:
the WiFi signal on the status bar is always on the bottom two signals
Click to expand...
Click to collapse
Different levels for each indication bar, probably. Is the WIFI working correctly? If yes, then nothing to fix here.

Categories

Resources