If I want to flash a nightly can I just flash the zip in CWM or do I have to create the whole bootable sd card thing again?
This is me personally, i have a functional SD card that's 16GB and a flashy flash recovery SD card that's 4GB.
Whenever a new nightly comes out I put it on my 4GB card then flash it.
Related
Thinking about rooting and installing cyanogen's latest rom but before I do I want to know what happens if I purchase a larger micro sd card in the future?
Is it as simple as copying everything from my sd card onto my pc and then transferring it onto my new card or will I have to reflash things and stuff?
Thanks in advance
yes, just backup to pc then new sd
if you're installing 5.0.5 cyanogenmod you may want to backup the sdcard first if you want app2sd
then in amonra partition the sd card with
swap partiton=0
EXT=512mb (or whatever size you want for apps)
fat32=remainder
then do the upgrade ext>ext2 ext2>ext3 ext3>ext4
then just put your backup from pc into the sdcard
only thing is amonra doesnt support the nandroid+ext for app2sd currently, but i believe is in the works. so would need to backup the ext and fat32 before swapping to new sdcard, depending how soon you're upgrading to new sdcard that is.
Cheers for that. Sounds simple enough.
So, I downloaded the nookie-froyo-0.6.8.custom.3.zip file mentioned in this thread:
http://forum.xda-developers.com/showthread.php?t=883175
I assume the next step is to make that zip file available to clockwork on the nook somehow? Is that correct? How do I do that?
Thanks.
custom.3 ? I see only nookie-froyo-flashable-0.6.8.zip on the op.
Anyway thats what I'm on and its what I finally decided on after a week of ROM jumping. It runs on the internal flash memory. emmc.
Two steps:
1)on your pc download a suitable CWM recovery .img file. Write it to your sd card via a sd card read/writer. I'm using the CWM 3.0.0.5 image. Next copy the above froyo image .zip to the sd card.
2)insert the sd card in your nook and boot from the power off state. It will boot off the SD card into CWR recovery. Use the recovery menu (vol+,vol-, nook n) and install the .zip file from the sd card. Next remove the sd card and reboot.
done.
I used the 4GB sdcard CWR .img file from here, can flash/backup/recover HC and froyo.
http://legacyschool.us.to/nookdev/clockwork/0.1-ext4/
britoso said:
custom.3 ? I see only nookie-froyo-flashable-0.6.8.zip on the op.
Anyway thats what I'm on and its what I finally decided on after a week of ROM jumping. It runs on the internal flash memory. emmc.
Two steps:
1)on your pc download a suitable CWM recovery .img file. Write it to your sd card via a sd card read/writer. I'm using the CWM 3.0.0.5 image. Next copy the above froyo image .zip to the sd card.
2)insert the sd card in your nook and boot from the power off state. It will boot off the SD card into CWR recovery. Use the recovery menu (vol+,vol-, nook n) and install the .zip file from the sd card. Next remove the sd card and reboot.
done.
I used the 4GB sdcard CWR .img file from here, can flash/backup/recover HC and froyo.
Click to expand...
Click to collapse
When I copy the froyo image to the card where do I place it?
Thanks!
Root directory
SO basically I want to
1.) burn a CWR SD card.
2.) Put it in the nook and boot into CWR
3.) Take the card out, format it back to fat32
4.) Put the Phiremod 6.3 SD flashable rom.zip on it.
5.) Pop it back into the nook and mount the storage.
6.) Flash Phiremod onto the SD card.
7- Turn nook on and Profit??
Well, I just booted my NC to CWR from SD, then removed the SD and was able to read a second card without any error from CWR.
So I suppose that would work in theory, the only difference would be you are doing it on one single card and not two. Though I don't know how safe it would be.
Yea I took the plunge and tried it.
Although I flashed
Update 4/30: v6.2 Update(This will format /system only): http://www.multiupload.com/58WUW1AZ0A
MD5 - 70b2ff0345897252f3f3dff8728a4b55
found in this thread Flashing Roms to SD CARD -
http://forum.xda-developers.com/showthread.php?t=998861
and I didn't boot into Phiremod, instead it was nook stock.
Would I first need to flash V6.zip, then flash the 6.2 update.zip?
EDIT* Did not work. Still boots into stock
How about you try this:
[ROM][CM7] Size-agnostic SD Card image and CM7 installer for SD Cards. with updater
I don't know if it works with a Phiremod ROM but it doesn't hurt to try. I used this to install plain CM7 on my Card.
____________________________________________________
Sent from NookColor CM7 using Tapatalk
can anyone give a cwm zip flashable file to revert from internal sd card as external sd card
i flashing my phone from temasek gb rom to pacman rom (JB 4.1.2)for old bootloader but it always got stuck on lg logo it's seem after format data and wipe,the internal sd card still become as external sd card ,its because system partition or what?
please help
i tried this method http://www.mediafire.com/?vmu8sh0832oaac8
it works and now my firmware is 2.2 stock with internal storage as default but in CWM or TWRP the internal sd card still recognized as ext sd card so can someone help me? to return it to normal?
solved
Hey, My i9000 is running the latest PA 4.3 Beta 2. I tried flashing Semaphore along with it, but all the time it shows that the Internal SD is unmounted. This is the issue with the other Kernels too! The SD Card is only mounted with the stock PA Kernel, otherwise the SD Card mounts in any ROM.