Since im not a dev, i dont have the chops to figure this out.... but I would definately donate to a dev that can figure this out.
Is hdmi mirroring possible?
in build.prop theres this:
ro.hdmi.mirror.enable=false
ro.hdmi.default.app=
hw.overlay.path.config=
Click to expand...
Click to collapse
changing the first line to true WORKS only at boot, it correctly mirrors what you see on your phone. but once the phone is done booting, it kicks the TV to a black screen and the phone asks you if you want to open up the entertainment app or do nothing.
So mirroring is there, its just blocked by something on boot.
andy2na said:
changing the first line to true WORKS only at boot, it correctly mirrors what you see on your phone. but once the phone is done booting, it kicks the TV to a black screen and the phone asks you if you want to open up the entertainment app or do nothing.
Click to expand...
Click to collapse
Have you tried disabling webtop? It sounds like the app takes over control of the HDMI port once started.
krkeegan said:
Have you tried disabling webtop? It sounds like the app takes over control of the HDMI port once started.
Click to expand...
Click to collapse
how do you do that?
omg yes how do you do that. please, thank you thank you thank you. they're such assholes for blocking this very basic task and wanting you to buy the stupid dock
eatkabab said:
omg yes how do you do that. please, thank you thank you thank you. they're such assholes for blocking this very basic task and wanting you to buy the stupid dock
Click to expand...
Click to collapse
Sorry, I just ordered my phone, so I don't have one to tinker with yet. But maybe you can use titanium backup to freeze the app. If it doesn't show up as an app, maybe you can use autostarts to try and stop it. Finally, the last idea I have is to poke around in the init scripts to find the offending app. All of this is just speculation, but since you can see mirroring at bootup I think it is pretty clear that the webtop app is causing the issue.
I can confirm this. It boots to the homescreens. I got to unlock and touch a widget. Then it disappeared, the box came up asking if I wanted to connect to the entertainment center.
I back through my apps with titanium backup and froze anything regarding hdmi. The entertainment box went away, but it still takes away hdmi mirroring.
I didn't have any results with autostarts either, but I don't really know what to look for.
Sent from my MB860 using XDA Premium App
Tried to freeze up some services with Titanium backup - no luck so far.
There is something happening during the boot process which disables the mirroring.
Tried this also. Same results.
I went into Titanium Backup and deleted the Entertainment Center application as well as a couple of other ones I thought might be the reason. But, it still switched off to a black screen after a few seconds.
Any updates on this?
I still don't have a phone yet, but I had another realization.
When you plug in the HDMI cord, the phone pops up with options regarding what to display. i.e. the webtop or the entertainment center. Ergo, something lower in the OS than the webtop is blocking the HDMI port.
However, my thought is, rather than block this, we need to figure out how to make another entry in this list. So the options read, webtop, entertainment, and mirroring.
Unfortunately this may require waiting for Moto to release the code. It will also require someone with coding skill. I for one have never worked with Android and have very poor experience with even Java.
This subject is being killed all over the forums in different threads. The hdmi is being toggled for different apps like webtop or media. The config is the other part that supports the hdmi app service options. We have dumped the apk into smalli and have confirmed this.
There is devs working on webtop without dock and it maybe beneficial to combine these efforts to support display mirroring... just a thought
Sent from my MB860 using XDA App
Any updates on this?
ANDY12001 said:
Any updates on this?
Click to expand...
Click to collapse
There is no need for dedicated mirroring now that you can launch the webtop without the dock.
You can run mobile view full screen once you launch webtop.... and alas, you have HDMI mirroring.
Mods: You can lock this thread.
leadguy68 said:
There is no need for dedicated mirroring now that you can launch the webtop without the dock.
You can run mobile view full screen once you launch webtop.... and alas, you have HDMI mirroring.
Mods: You can lock this thread.
Click to expand...
Click to collapse
Can i just run mirroring?
leadguy68 said:
There is no need for dedicated mirroring now that you can launch the webtop without the dock.
You can run mobile view full screen once you launch webtop.... and alas, you have HDMI mirroring.
Mods: You can lock this thread.
Click to expand...
Click to collapse
Well thats not fully correct, if you launch a app that has on screen buttons like games or emulators..you cant use or play them using the phone as these dont show up on phone.
so we could still do with mirroring for atrix
leadguy68 said:
There is no need for dedicated mirroring now that you can launch the webtop without the dock.
You can run mobile view full screen once you launch webtop.... and alas, you have HDMI mirroring.
Mods: You can lock this thread.
Click to expand...
Click to collapse
ANDY12001 said:
Can i just run mirroring?
Click to expand...
Click to collapse
As of now the best solution is to do what leadguy68 suggested. I don't think any dev is working on it. It is just not worth it since what you want to accomplish can be done with just one additional mouse click after enabling webtop.
If I am wrong and any devs are still working on this, please ignore this thread, otherwise it is prudent to close this thread. Or maybe OP can state this in the first post so that people stop asking about HDMI mirroring.
Immix said:
As of now the best solution is to do what leadguy68 suggested. I don't think any dev is working on it. It is just not worth it since what you want to accomplish can be done with just one additional mouse click after enabling webtop.
If I am wrong and any devs are still working on this, please ignore this thread, otherwise it is prudent to close this thread. Or maybe OP can state this in the first post so that people stop asking about HDMI mirroring.
Click to expand...
Click to collapse
I think it's dumb to end a thread because YOU aren't interested in something. I think it'd be a damn good idea to get mirroring running. The webtop mirror is laggy, and I want to play a real game of angry birds on a 100" screen, lol. Keep the work up, if anyone is working on it. I'll keep trying on my end to get it working.
link12245 said:
I think it's dumb to end a thread because YOU aren't interested in something. I think it'd be a damn good idea to get mirroring running. The webtop mirror is laggy, and I want to play a real game of angry birds on a 100" screen, lol. Keep the work up, if anyone is working on it. I'll keep trying on my end to get it working.
Click to expand...
Click to collapse
exactly. mirroring is still highly sought after. Like another said earlier, for people who want to run emulators, you're sol with the webtop, theres no onscreen buttons AND you cant use your wii-mote while in webtop mode.
Agreed. Still very much needed for games. Web top game emulation is laggy.
Sent from my MB860 using XDA App
Related
I was wondering if anyone had any ideas how to turn the g1 camera into an actual webcam connected to your computer with a USB. I've tried the method of pulling images and streamlining them through ADB, framerate is terrible and just not fast enough. If anyone has any better methods or way of doing this lets get cracking and release something asap
medjai said:
I was wondering if anyone had any ideas how to turn the g1 camera into an actual webcam connected to your computer with a USB. I've tried the method of pulling images and streamlining them through ADB, framerate is terrible and just not fast enough. If anyone has any better methods or way of doing this lets get cracking and release something asap
Click to expand...
Click to collapse
try qik in the market see if that suites ur need
turboyo said:
try qik in the market see if that suites ur need
Click to expand...
Click to collapse
He wants to connect it to his computer.
qik works great for that unless you want to stream to a site other than qik.
to clarify yes i get that he wants to use it as a regular webcam for something like stickam...etc, nothing out there to do that yet though.
exactly. I want to actually use it like you would a normal webcam. I dont want to stream to a server. I would rather have it stream to my computer and have applications handle displaying it. We would probably need to create a custom driver for that, but that shouldn't be too difficult if we can first find out a way to send more frames per second then I have a friend that can handle the driver issue.
eleminop said:
qik works great for that unless you want to stream to a site other than qik.
Click to expand...
Click to collapse
eleminop said:
qik works great for that unless you want to stream to a site other than qik.
Click to expand...
Click to collapse
Did you read his post? haha
tekkitan said:
Did you read his post? haha
Click to expand...
Click to collapse
i did read the post, there just isn't an app to do that, do you have any suggestions or are you just going to be a smartass all day?
eleminop said:
i did read the post, there just isn't an app to do that, do you have any suggestions or are you just going to be a smartass all day?
Click to expand...
Click to collapse
Instead of suggesting an app that isn't doing what he asked for, why not say there is no app for that yet?
I can be a smartass all I want, can you be intelligible?
tekkitan said:
I can be a smartass all I want
Click to expand...
Click to collapse
yes. clearly.
there is a thread asking people for app ideas on xda. I'm sure if you post something there they'll be able to help you a little more
i managed to do it using Screencast here is a video:
http://www.youtube.com/watch?v=McI3qfkFFH4
lalalala1 said:
i managed to do it using Screencast here is a video:
http://www.youtube.com/watch?v=McI3qfkFFH4
Click to expand...
Click to collapse
If that's true (and from the looks of it I guess it is) then that would be AWESOME!! ..do share with others how you managed to do that!!
Using screencast does work, but it still has an issue with low frames.
For this you need either Droidexplorer (which is what i am using) or Screencast, and the SDK setup.
Open screencast, turn phone camera on, screencast has a record feature.
More info on making this happen would be greatly appreciated!
i didnt use recording, it was streamed live, i cant remember on how to do it, i will have a look at my computer when i get home! and yes the frame rate is pretty poor but when i use the webcam i hardly move so its alright
ok so how to do it first of all let me tell you that you have to have the phone showing on the desktop because screencast shows your phone on your desktop and screencamera shows your desktop as a webcam so if you cant see it, screencamera cant see it!
1. you need to get screencast showing what is on your phone;
get it via:
http://forum.xda-developers.com/showthread.php?t=558108
or http://forum.xda-developers.com/showthread.php?t=557717
2. download and install screencamera:
http://www.pcwinsoft.com/ScreenCamera/download.asp
3. open screencast and put your phone on the camera application (you can still use the phone don't have to struggle doing it on the computer)
4. open screencamera
go into configuration and change the frame rate to what is appropriate to screencast, i think at the moment its 4fps
go to video output an change the frame size to what you like, i have it at 320 x 420 and have the phone set horizonally on screencast (by right clicking on screencast)
(make sure you have screencast where you want it as you will have to do this step again if you want to move it and make sure you can see it) click on "select region of desktop to capture" and highlight the screen of the camera
done, skype will now see it as that selected area of the desktop as a webcam i cannot confirm if any other application will see it but they should
I believe i was able to capture a livecast event with Video Lan player
Livecast is available for android I believe but i squite the same as quick.
Only livecast made wmv-files.
just tried qik, didn't like it because it didnt have a portrait mode.
wish somebody would make an app for this it would be so much more easyer
i dont like qik cause u have to go to there web site i want to be able to connect my g1 though aim or yahoo web cam
Wanna turn your Screen off while watching videos over HDMI?
Or need a watchful Xoom but don´t want the screen to be on all the time?
Here´s the app you need!
Description:
The App adds the posibility to turn off the lcd backlight to your xoom. Its nothing less then a shutdown-button for your display backlight.
The app toggles your lcd backlight to zero and back, said doesn´t just overlay your screen with black, like the other apps inside the market.
it turns off your screen light completly , but the screen stays responsible and the devices stays awake.
Use it instead of locking your xoom, if you need your device itself to be active but dont need the display to be on, e.g. while you´re watching videos over hdmi, use your xoom as a vnc server or something like that.
Click to expand...
Click to collapse
Use this awesome little App with some "starter app" of your choice.
For example, use the Shaking Shortcurt App, register ToggleScreenXoom.apk and you could turn your screen on/off with just shaking your device.
(tested on xoom [email protected] but should work on every rooted xoom)
Thanks to [email protected] for his work on this.
If you find this useful, hit the Thanks button.
Click to expand...
Click to collapse
The attached zip contains a regularly installable .apk
Just install it as every other .apk
DON´T FLASH THIS VIA RECOVERY!!
Click to expand...
Click to collapse
DUDE. That's what I've been searching for, don't know how I didn't find it, trying this tonight! Will update back with my results...
Update: Perfect solution. Works great, thanks!
App attached to first post!
does it work on xoom2?
Hello!
Fanstastic app.
Does it work on xoom2? with 3.2.2 rooted?
I used the old method that this thread started as, using market apps. Unfortunately it doesn't work with the Cornerstone version of the Eos roms. What exactly is app? Can you provide more detail? I don't just download apps to try them without some type of info...
I use the current method on cornerstone #16.
otis_bartleh said:
I used the old method that this thread started as, using market apps. Unfortunately it doesn't work with the Cornerstone version of the Eos roms. What exactly is app? Can you provide more detail? I don't just download apps to try them without some type of info...
Click to expand...
Click to collapse
description added to the first post.
jerrycycle said:
I use the current method on cornerstone #16.
Click to expand...
Click to collapse
Good to know...
aeros0ul said:
description added to the first post.
Click to expand...
Click to collapse
Cool, thanks, basically the same thing I have now with different apps. It's SwipePad that isn't working right with Cornerstone, I'll play around later. Thanks again for this...
otis_bartleh said:
Cool, thanks, basically the same thing I have now with different apps. It's SwipePad that isn't working right with Cornerstone, I'll play around later. Thanks again for this...
Click to expand...
Click to collapse
"Basically" the same as the old method, right. Just in one app without the need of configuration and with more flexibility to be launched by other apps.
Maybe you´ll try "Shaking Shortcurt". A nice app that lets you launch two other apps by shaking your xoom.
Yeah, think I'll try that instead of SwipePad. Since Swipepad rely's on the borders of the screen and Cornerstone alters the borders, I'm guessing that's the issue. Maybe the Shaking app won't have that issue.
Thanks again for the clarification, and the thread. I really can't believe this thread hasn't blown up!
Please excuse my ignorance but, how would I go about installing this??
Draxin said:
Please excuse my ignorance but, how would I go about installing this??
Click to expand...
Click to collapse
i dont understand your question.
just install the app and execute to turn off your screen and again (remember the position) to turn it back on.
or use a starter app like "Shaking Shortcut" to toggle the screen on and off by shaking your xoom.
aeros0ul said:
i dont understand your question.
just install the app and execute to turn off your screen and again (remember the position) to turn it back on.
or use a starter app like "Shaking Shortcut" to toggle the screen on and off by shaking your xoom.
Click to expand...
Click to collapse
Lol, sorry, haven't installed apps that i downloaded from a site before, only from the play store where everything gets taken care of for me, I had meant how to install this so that I could use it but i figured it out. Thank you very much, it works great.
aeros0ul said:
i dont understand your question.
just install the app and execute to turn off your screen and again (remember the position) to turn it back on.
or use a starter app like "Shaking Shortcut" to toggle the screen on and off by shaking your xoom.
Click to expand...
Click to collapse
Do we install by flashing zip file in recovery? Do we change the file to an apk? What is the way we should install the the file? Thanks
droidrev71 said:
Do we install by flashing zip file in recovery? Do we change the file to an apk? What is the way we should install the the file? Thanks
Click to expand...
Click to collapse
NO!!! don't flash in recovery, i say that, mainly cause I don't know what it will do... you can install the app while ics is running, I think I used astro but can't remember. What you just asked was the same thing I had wondered.
Draxin said:
NO!!! don't flash in recovery, i say that, mainly cause I don't know what it will do... you can install the app while ics is running, I think I used astro but can't remember. What you just asked was the same thing I had wondered.
Click to expand...
Click to collapse
You´re right. Thanks for the correction.
First post is edited to get it straight.
Does this only work on the xoom? I have an acer 510 and I want something like this. It sounds like this gets launched in conjunction with whatever app you launch. I'd rather that while on hdmi the tablet display is off entirely. Or maybe this does that as well.
So is this specific to the xoom?
sark666 said:
So is this specific to the xoom?
Click to expand...
Click to collapse
According to the readme provided in the zip file this application seems to be specific for the Xoom, or at least a few tegra 2 tablets.
That's disappointing. Why would manufacturer's assume that a user wants the display to stay on while using hdmi?! How about a sane default like leave hdmi output on and turn off tablet display after the normal inactivity duration. But allow a keyboard/mouse not to be recognized as tablet activity.
Could this be modified to work with more devices? Or say newer tegra 3 devices if it's chipset specific. But really, ics should have some application layer to control things like hdmi res, screen active etc...
Nice! Works in AOKP
First of all, this is a great app, and it works well in AOKP (build 37).
To trigger the app, I set my "home" softkey on my xoom (in Rom Control) to trigger the app when the key is held. Even though you can't see the softkeys when on hdmi, after a while, its exact location is easy to recall.
It is really convenient. Thanks for the much needed addition to a great device.
I had the 'great idea' to hook a monitor, keyboard and mouse to my Atrix HD and use it as a PC (to save $70 month on internet) Problem is, it's HORRIBLE. It goes into some kind of 'Dock' mode, and you can only have 4 icons. Flash player doesn't work in Chrome or Browser, so you have to launch youtube videos in a new window. Plus, all these ****ing "mobile" websites that everyone loves suck, and I can't figure out how to change Chromes user-agent header.
I bought this cable: shop dot teamblackhat dot info Cables_c4.htm
Think I'm going to try and root it and get the wifi hotspot to work.
Does anyone know if there is a way to keep the 'Dock' mode from showing up? It's worse than just the normal phone (which wouldn't be bad)
Forget chrome bro, its oversimplified garbage. With stock browser you only have to set desktop mode once every time you open it, with chome its everytime you open a website + everytime you open the browser.
Also, chrome doesnt have plugin support, you need this flash, and it will work in default browser: Adobe_Flash_Player_11.1.115.17.apk
When the dock notification comes, you should chose charge only so it doesnt switch to clock mode. BTW JB is **** with hdmi, google messed it up.
souljaboy said:
When the dock notification comes, you should chose charge only so it doesnt switch to clock mode. BTW JB is **** with hdmi, google messed it up.
Click to expand...
Click to collapse
well mine never shown the dock notification even after rebooting. any way to make it appear ?
smogtdi said:
well mine never shown the dock notification even after rebooting. any way to make it appear ?
Click to expand...
Click to collapse
It appears when you connect it, but dont open up the lid.
souljaboy said:
It appears when you connect it, but dont open up the lid.
Click to expand...
Click to collapse
thanks but none of the settings solved the screwed up display on a lapdock.
But I can't see how it's still ok mirroring to the 2 TVs we have at home.
smogtdi said:
thanks but none of the settings solved the screwed up display on a lapdock.
But I can't see how it's still ok mirroring to the 2 TVs we have at home.
Click to expand...
Click to collapse
Seems like they only support 720p and 1080p resolution now...
atrix hd does not support webtop like other motos, so it will only look like a big android screen just like the phone. no tablet mode or anything like that.
el_venga said:
atrix hd does not support webtop like other motos, so it will only look like a big android screen just like the phone. no tablet mode or anything like that.
Click to expand...
Click to collapse
I didn't see any reference to webtop. we all asked for true 720p display on the lapdocks.
souljaboy said:
Seems like they only support 720p and 1080p resolution now...
Click to expand...
Click to collapse
if it support 720p, we would get a very small black band around the display (as if you plug any other hdmi capable device in the lapdock (like a blue-ray player))
there's something wrong like if they targeted the lapdock on purpose.
My original email was wrote on dec.14.
***** ******* via Email 12/30/2012 10:50 AM
****,
So sorry for the extended response time. We've been working hard on improving our products and services to meet the needs of power users like yourself. You posed an excellent question, referencing your previous email, and currently my engineer team is looking into the HDMI issues you referred to. We are working diligently to locate and resolve any issues we find. I want to thank you for your inquiry and let you know that it is through feedback such as yours we are able to provide a better Motorola experience. We will be glad to provide more info when it's available. Again, Thank you for choosing Motorola.
Best Regards,
*****
Motorola Tech Team
I've already sent another back with some of my recent findings, the guys at s3 forum were of great help(they're having the same letterbox).
souljaboy said:
My original email was wrote on dec.14.
Click to expand...
Click to collapse
Is there a place where I can send my own comments (like the browser bookmarks mess) ?
https://motorola-global-portal.custhelp.com/app/account/overview
click on it, login, or register if you need to.
when youre logged in, click on the link again, should take you to the "mystuff" page
add a phone, and post question, you can also op-in to be contacted in some developer programs
The Chromecast only allows certain devices to use it's new mirroring functions. The OPO is apparently not on that list. But, thanks to this handy app, the Chromecast will now recognize my OPO and allow for full mirroring!
http://forum.xda-developers.com/har...experimental-enable-mirroring-device-t2812193
- Install the app and open it.
- Enable "Mirror Status:" and enable "QuickSettings Mirror:"
- Either open the chromecast app, and find mirroring in the left panel, or
- Pull down into your quick settings and see the icon for "cast screen"
There is a small bit of lag, which would mean some games that require split second timing would be hard to play on the big screen, but others work fine, like FIFA 14 for example. Any video site (that doesn't already support Chromecast) will work perfectly as well.
i try this but there is no audio out from my oneplus one only from youtube
Will this make my chromecast work as miracast that allow screen mirroring?
_____________
Sent from my GT-I9300 powered by Temasek Rom & Boeffla Kernel
Fueled by 7000mAh ZeroLemon Battery
Use Allcast its much better audio works perfect..
chainsuk said:
Use Allcast its much better audio works perfect..
Click to expand...
Click to collapse
Are you referring to samsungs allshare cast? Do you have it working on it?
Works perfectly, except many times there are lags. i hope google fix it
No he is talking about Koushik's "Allcast" app from the Playstore
chainsuk said:
Use Allcast its much better audio works perfect..
Click to expand...
Click to collapse
Allcast screens to TV or just PC. We are talking about screen mirroring and not Allcasts normal feature right?
A little easier way (for some)
Thanks for one of the popular and working solutions.. I was just about to apply that and I just wondered what happens if I try "Cast Screen" option in my One with my Samsung Smart TV, and I got it working with little efforts! Here's the thread I posted:
http://forum.xda-developers.com/oneplus-one/general/howto-oneplus-one-cast-screen-smart-tv-t2938752
Might be helpful for somebody who wants to go an easy way if possible.
Enjoy casting..!
yugz5 said:
Thanks for one of the popular and working solutions.. I was just about to apply that and I just wondered what happens if I try "Cast Screen" option in my One with my Samsung Smart TV, and I got it working with little efforts! Here's the thread I posted:
http://forum.xda-developers.com/oneplus-one/general/howto-oneplus-one-cast-screen-smart-tv-t2938752
Might be helpful for somebody who wants to go an easy way if possible.
Enjoy casting..!
Click to expand...
Click to collapse
Does it work with the latest version or CM11S 44S??? it stop working for me on that version.
I... am... not sure. I was on XNPH38R when I tried.
I will retry after updating to 44R and will post an Update.
If you try before me, do share..!
Sent from my A0001
masterchop said:
Does it work with the latest version or CM11S 44S??? it stop working for me on that version.
Click to expand...
Click to collapse
I found a little write up that makes it a lot easier and more stable. First download root explorer go to system folder then build prop. Find
ro.product.device=A0001 and change A0001 to hammerhead and save changes. Now go to settings / display and under cast screen option your chrome cast will now appear then click on it. Now once WiFi on and you pull down quick settings you will see cast option appear.
Sent from my A0001 using XDA Premium 4 mobile app
masterchop said:
Does it work with the latest version or CM11S 44S??? it stop working for me on that version.
Click to expand...
Click to collapse
working for me
masterchop said:
Does it work with the latest version or CM11S 44S??? it stop working for me on that version.
Click to expand...
Click to collapse
Tested... And working fine..!
Sent from my A0001
yugz5 said:
Tested... And working fine..!
hehe for some reason it did not work on the first try, after resinstalling it work like a charm.
the only problem is that the screen flickers a bit when you pull down the notifications.
Click to expand...
Click to collapse
masterchop said:
yugz5 said:
Tested... And working fine..!
hehe for some reason it did not work on the first try, after resinstalling it work like a charm.
the only problem is that the screen flickers a bit when you pull down the notifications.
Click to expand...
Click to collapse
That happened to me once when I was kind of away from the TV or when I thoroughly covered back of my phone. So I assume that would be because of weak Wi-Fi Direct connection between devices. Also, I noticed increase in delays and some jitter in video. So this surely seems like connectivity issue.
May be trying without a case or with WiFi antena area open/unblocked should reflect the improvement.
Sent from my A0001
Click to expand...
Click to collapse
Hi,
I only like to start a thread about the development of an Xposed module for tweak AA.
Someone is interested on it?
Reagards!
manos78 said:
Hi,
I only like to start a thread about the development of an Xposed module for tweak AA.
Someone is interested on it?
Reagards!
Click to expand...
Click to collapse
Oh yes - I would be very interested. I just have to wait for another 1-2 months until my car (A4) with AA/CarPlay support will be delivered.
Unfortunately I am not a developer but I'd be one of your first supporters and I will gladly test anything you guys develop .
Since Android Auto has a lot of limitations, an exposed module would be the best way to get rid of them.
Not a lot of replies. Looks like there are still not enough people who have Android Auto . We'll have to wait until it catches on I guess.
yes - I think so, too. But I am also still hoping, that manos78 will start the development anyway
Absolutely. For example here maps for Android Auto would be awesome
would also love to see some android auto mods
Me too !
Let me know if I can help by anyway
I'm interested.
I've got a Pioneer AVH-4200NEX on the way, so I'll be looking at doing some Xposed work, depending on what functionality is missing. Not everything can be done via Xposed (like making Waze work over AA), but it would be good to get an idea of what sort of additional functionality people are looking for on the AA platform.
agentdr8 said:
I've got a Pioneer AVH-4200NEX on the way, so I'll be looking at doing some Xposed work, depending on what functionality is missing. Not everything can be done via Xposed (like making Waze work over AA), but it would be good to get an idea of what sort of additional functionality people are looking for on the AA platform.
Click to expand...
Click to collapse
Hey, it would be great to get rid of the limitation of only viewing few entries in a list when scrolling... I believe this is tracked via GPS, so it would be great to feedback a velocity of 0 to this process only.
manos78 said:
Hi,
I only like to start a thread about the development of an Xposed module for tweak AA.
Someone is interested on it?
Reagards!
Click to expand...
Click to collapse
I'm not a developer. But I'd love to try anything new.
donverse said:
Hey, it would be great to get rid of the limitation of only viewing few entries in a list when scrolling... I believe this is tracked via GPS, so it would be great to feedback a velocity of 0 to this process only.
Click to expand...
Click to collapse
Is this in specific apps only, or all AA-enabled ones?
(
agentdr8 said:
Is this in specific apps only, or all AA-enabled ones?
Click to expand...
Click to collapse
I would like to request this aswell. I know this happens on spotify and iheartradio for sure, its annoyi lng to the point i unplug my,phone and use it via bluetooth audio streaming to get to yhe play list i would like to when on a road trip on driving long miles with out stopping to change my play list its crazy that they do this for safety but ends up. Us plaaying with phone dissconnected due to the dam moving locks. (typed,on,my mobile device. Please excuse the typos)
agentdr8 said:
Is this in specific apps only, or all AA-enabled ones?
Click to expand...
Click to collapse
Yep I only know about spotify and gmusic as well. You just end up using your Phone in the Hand, there's really no point in this restriction
Sent from my LG-D802 using XDA-Developers mobile app
donverse said:
Yep I only know about spotify and gmusic as well. You just end up using your Phone in the Hand, there's really no point in this restriction
Click to expand...
Click to collapse
Is there an error message shown when you've hit this limitation? I've found "Unlimited browsing is disabled because car is not parked." in the AA apk, but I'm not sure if that's the proper verbiage when it's limiting listview scrolling.
agentdr8 said:
Is there an error message shown when you've hit this limitation? I've found "Unlimited browsing is disabled because car is not parked." in the AA apk, but I'm not sure if that's the proper verbiage when it's limiting listview scrolling.
Click to expand...
Click to collapse
Yes. If you've reached the tap limit you'll get a "you cannot continue browsing unless you're parked" message.
Sent from my Nexus 6P using Tapatalk
agentdr8 said:
Is there an error message shown when you've hit this limitation? I've found "Unlimited browsing is disabled because car is not parked." in the AA apk, but I'm not sure if that's the proper verbiage when it's limiting listview scrolling.
Click to expand...
Click to collapse
Im sure it that setting. They all seem to have this scrolling limit once you get past say...5 items or so.
I can post photo next time i am in my truck and have another phone to take the photo
chevyguy128 said:
Im sure it that setting. They all seem to have this scrolling limit once you get past say...5 items or so.
I can post photo next time i am in my truck and have another phone to take the photo
Click to expand...
Click to collapse
I still have my NEX on my workbench, so I can test this out later tonight. I believe it's in the AA SDK, so that individual apps don't have to determine if the vehicle is in motion or not. Shouldn't be too hard to work around.
Here's a request:
Would like to manage what apps show up on Android Auto (headunit)
For example, sideloaded apps currently do not show up
http://forum.xda-developers.com/and...o-general/to-loaded-app-android-auto-t3246489