Database Develop

[Q] New phone with 2.2 preloaded

Hello, I just recieved my new captivate, after returning old one on warranty, it came preloaded with 2.2 Froyo. My question is: can I still do a ODIN flash to get it back to 2.1? Thanks in advance for any help

Odin one-click flash to stock 2.1 worked for me after doing the official KB1 2.2 update via Mini Kies. Batch 1008 with 3-button combo download mode working.

Maybe I should have been more informative. The new phone came with 2.2 installed. I do not know if it ever had 2.1 on it. Using ODIN3 has the term "flash back to stock". Since this came with 2.2 I am assuming that 2.2 is stock. Will using ODIN3 give me a 2.1 (JF6) operating system even if it never had 2.1 installed on the phone? Also something else I am scratching my head about. The phone I am returning is an 1008 batch and the new phone is an 1007 batch. Is the new phone actually built before the phone that is being returned? Could this mean it at one time had 2.1 installed? Could it mean I recieved a refurbished phone? I was hoping for a new build thinking they fixed the problems of the old builds. Again thanks in advance for any help

there are 2 Odin3 programs, the Odin3 one click flash to stock (2.1 stock) and the odin flash anything you want Odin3 1.7 version.
yes that odin will do 2.1
what carrier are you? att or rogers? there are 2.2 flash and or upgrade packages.

Trusselo said:
there are 2 Odin3 programs, the Odin3 one click flash to stock (2.1 stock) and the odin flash anything you want Odin3 1.7 version.
yes that odin will do 2.1
what carrier are you? att or rogers? there are 2.2 flash and or upgrade packages.
Click to expand...
Click to collapse
hey bud...I have some similar problem...so I got this replacement phone after i bricked my good phone becoz of battery issue...now I was on continuum 3.1.1 but i decided to flash CM7. So I used Odin one click to stock. But I wasnt aware that my phone is one of those builds which looses 3 button combo....so i lost 3 button combo and i was frustrated I updated it to official froyo 2.2 from ATT using mini kies...now after researching a lot...I came across Odin with 3 button combo fix http://forum.xda-developers.com/showthread.php?t=818439
Now I am not sure, if I use this Odin...will i go back to stock 2.1 eclair with my 3 button fix back...as the description of this program claim that it works same as Odin one click but with 3 button como fix....
can anyone tell me if this wont brick my phone and i can go back to stock 2.1 with 3 button combo safely?

http://forum.xda-developers.com/showthread.php?t=818439
Now I am not sure, if I use this Odin...will i go back to stock 2.1 eclair with my 3 button fix back...as the description of this program claim that it works same as Odin one click but with 3 button como fix....
Click to expand...
Click to collapse
with the link you provided, please go to it and read the BIG BLUE LETTERS at the very top of post. read the rest of post for instructions,

Trusselo said:
with the link you provided, please go to it and read the BIG BLUE LETTERS at the very top of post. read the rest of post for instructions,
Click to expand...
Click to collapse
LOL i read it..but i am not sure if this will work for me..as i am on 2.2 stock...so whats stock for me...i am confused there...

it will flash you to the att stock 2.1 with 3 button fix. att stock not your stock. your stock is gone. that file is a stock rom with 3 button fix.

Well I managed to get a few questions answered both by the people responding to this post "Thank you very much" and customer services of Samsung and AT&T. Called Samsung and they confirmed that the batch # on my new phone makes it older than the phone I am returning. They also informed me that it was more than likely a refurbished model. This would take care of the question of if it ever had 2.1 installed. Called AT&T and explained my concern about recieving someone else problem phone and them sending me a model older than the one I am returning. They confirmed that it was a refurbished model. I will call warranty service again tomorrow and see what they can do. I would atleast expect a phone with newer manufacturing dates that may not have had the problems of the earlier builds to begin with.

davietr said:
Well I managed to get a few questions answered both by the people responding to this post "Thank you very much" and customer services of Samsung and AT&T. Called Samsung and they confirmed that the batch # on my new phone makes it older than the phone I am returning. They also informed me that it was more than likely a refurbished model. This would take care of the question of if it ever had 2.1 installed. Called AT&T and explained my concern about recieving someone else problem phone and them sending me a model older than the one I am returning. They confirmed that it was a refurbished model. I will call warranty service again tomorrow and see what they can do. I would atleast expect a phone with newer manufacturing dates that may not have had the problems of the earlier builds to begin with.
Click to expand...
Click to collapse
yeah u r right...I had a nice phone from new batch..which never lost 3 button combo...then becoz of my stupidity i bricked it...acted innocent infront of ATT and got replacement, but this phone is reconditioned and is from that batch which looses it 3 button combo...which I didnt know and I lost it now.,,
but this phone as awesome battery life and GPS....i am on stock 2.2...and I upgraded it myself

24hrs later and thinking I have overreacted. I returned phone because of random shutdown issues and absolutely horrible gps (even after several rom changes). The replacement phone (refurbished) has an awesome gps and no problem with the random shutdown "so far". I got a lock outdoors as soon as I turned it on not even a second of wait time. I even got a lock in my basement within 15 sec. I test drove it today. Instant lock, perfect tracking, no putting me on side roads, no going thru intersection I have stopped at, turned when I turned and no loss of signal. In other words PERFECT! I think the gps is a hardware problem that has a fix. I don't care when the phone was built as long as it works the way it is suppose to. Now I just hope that after I flash a new rom it stays that way.

viny2cool said:
yeah u r right...I had a nice phone from new batch..which never lost 3 button combo...then becoz of my stupidity i bricked it...acted innocent infront of ATT and got replacement, but this phone is reconditioned and is from that batch which looses it 3 button combo...which I didnt know and I lost it now.,,
but this phone as awesome battery life and GPS....i am on stock 2.2...and I upgraded it myself
Click to expand...
Click to collapse
Ummm... my phone is one of that batch (1008), and when I flashed with one-click I did lose 3-button. But flashing back to stock with ODIN 3 gave me 3-button back, and I' be been able to use it every since, since I'm one of those people who always flashes back to stock whenever I change or update ROMs...though honestly, I never use the 3-button option. I root, add Clockwork, and get into download mode from there. Works for me... Flashing to stock with ODIN 3 (NOT the 1-click version!) should give you back 3-click, too.
The real issue to me is AT&T giving you a used phone and calling it new. Beyond being really tacky, isn't that kind of fraudulent? Or is there something in the contract that makes lying about that okay? And if it's the latter, why don't they just tell you up front that you might get a refurb to replace your new one?
Tacky, I tell you; just tacky...

Update. Just flashed my phone back to 2.1. Flashed the "Paragon RC6" rom. Note to self: make sure you send a few donations. Everything is working great life is good. Refurbished or brand new doesn't really matter at this point. Awesome phone that works awesome. This phone is my very first cellphone. I was clueless until I found this forum. Thanks to everyone that contributes to this forum and the dev's that make having this phone worthwhile.

kevalin said:
Ummm... my phone is one of that batch (1008), and when I flashed with one-click I did lose 3-button. But flashing back to stock with ODIN 3 gave me 3-button back, and I' be been able to use it every since, since I'm one of those people who always flashes back to stock whenever I change or update ROMs...though honestly, I never use the 3-button option. I root, add Clockwork, and get into download mode from there. Works for me... Flashing to stock with ODIN 3 (NOT the 1-click version!) should give you back 3-click, too.
The real issue to me is AT&T giving you a used phone and calling it new. Beyond being really tacky, isn't that kind of fraudulent? Or is there something in the contract that makes lying about that okay? And if it's the latter, why don't they just tell you up front that you might get a refurb to replace your new one?
Tacky, I tell you; just tacky...
Click to expand...
Click to collapse
I would admit this all is easy...i got my new phone in september and had almost flashed all roms on xda for captivate...but once i didnt charge the battery full and used odin 1 click...which bricked my phone...
now i got replacement phone...which was refurb and ATT guys told me that...but as my original phone was actually bricked (means dead..no hopes) I accepted it...but ignored the fact that it can loose 3 button combo...while i was flashing it to stock (having CM7 in mind to flash next) I suddenly realized that i lost 3 button combo (which is required for CM7). I felt betrayed...so i thought to forget flashing any rom and go to stock 2.2....BIG MISTAKE....after 2.2, i was not able to flash any update.zip...i tried for root, CWM, 3 button combo...always got same error E:/signature un verified..
So in desperation I used AIO 3.0...and yes i managed to get the famous phone-!-computer screen....lol I dont have Jig...so i got it replaced again...
atleast from all this i learned how to use ADB (to get into recovery and download without 3 button combo)
Now waiting for my next refurbished phone...

Soft-Bricked, No PC connectivity

Hey there, i am feeling somewhat overwhelmed with all of the advice going on out there and need someone who can give me the answer to my specific problem hardware wise without breaking a sweat...
I flashed a froyo 2.2 rom onto my phone a while ago, recently all of my apps stopped working, and i could no longer install any apps.
Couple days ago i tried openning gmail and the screen went black and gave me the bzzzzzz...............................bzzz...bzzz...
vibrating error that you usually get when an app crashes.
Now the phone continues doing that even when booted up and stuff
It starts right after the S screen and repeats until the battery is removed.
My phone can't get into download or reset mode using the 3 button method so i bought a jig off of ebay, works like a charm.
however NOW, i cannot get the computer to see the phone; both when it is on and attached and in download mode and attached. Odin can't see it, neither can Kies.
If i can get either to see it, i can look up the flashing process to make sure everything is right.... but as of yet nothing i am doing is making a difference.
Thanks for any help

Ok, I'd focus on odin so disable Kies (in task manager processes - all the kies processes).
Then I would 1) reinstall the drivers (standalone ones) 2) Have a few versions of odin to try (like 1.3, 1.7 and ez odin) 3) Clean your usb port on the phone (and computer maybe too - whats the harm?).
Usually if you are sure the drivers are Ok then you should be able to odin working with a nice clean port. They are more sensitive to dirt/moisture or whatever than they should be.
Try that and let us know...
BTW Some people think that the order is important but I've never noticed that. I always have odin open and then connect it but cant hurt to try the other way around too.

Hey thanks alot,
I am at work right now but i am optimistic about trying that out lol.
Just so i know for when the time comes and if Odin works, what files do i need to flash it? .pit, .tar and anything else specific for Bell Canada?
I only ask because you are with Bell so it is probably a very simple answer for you. Otherwise I am sure i can find it elsewhere.
Thanks,
I'll keep you updated
Josh

Download the complete jl2 rom from link I posted yesterday (search my posts) with repartition ticked, then flash the kc1 rom from stock rom link on xda or at samfirmware.com and flash without repartition if you want the latest. You could just try the kc1 step but I you need to repartition.
Sent from my GT-I9000M using XDA Premium App

Hey man,
my phone has never been sent in for repairs or replaced...
I was reading one of your other posts and you advised another member to send it in and maybe they will replace/update hardware?
I have still had my phone for less than a year so sending it in will be no problem at all...
Should i flash to the latest myself or return to stock and send it in?
I really appreciate your help.
Thanks

Well he knows his is broken as he can see that his internal memory reads 0 (which means its cooked - ask me how I know...) and he was trying to fix it in a round about way. Or there was the guy who flashed a captivate rom - that was just a big no-no.
You might just have a corrupt partition or some other corruption in the file system. I seem to get that all the time and its a pain but very fixable .

Alright, sooo
-uninstall Kies
-install drivers only
-try to connect to Odin
-If succesful flash with Odin
-dance with joy
Got it, I will update you later when i get home.
Thanks

installed drivers on my work computer (32 bit windows xp) and nothing... I've tried phone off, phone on, phone in d/l mode... It doesn't pick up anything...
I can try it on my Windows 7 comp at home and see if that works but i'm wondering what the worst case scenario is just bringing into Bell and having them fix it... Am i looking at charges, warranty voiding, etc.. etc... to have it fixed or could i BS my way out of it?

Fuuuuuuuuuuuuuuuuuu
pretty sure i flashed the wrong firmware on my phone, when it boots up it says GT-I9000 not GT-I9000M.
It worked fine for like 6 months so i never questioned it... damn damn damn

Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....

I9000 firmware is completely compatible. The text you see is from the kernel which are always for i9000 unless you have one of the three bell firmwares. So that's not the issue.
Sent from my GT-I9000M using XDA Premium App

RogueCow27 said:
Not to be completely devious but i got an extended warranty that replaces the phone due to water damage, theft, etc. etc...
If there is no other way should i take advantage of that?
I would hate to jump to one of those actions but i am somewhat panicking becuase i made a super-noob mistake and effed up my phone....
Click to expand...
Click to collapse
I would keep trying. I have gotten warranty before and I was in the same predicament as you almost except I knew that the internal memory was dead. But that was also around the time when most of the I9000M models were dying. They might be checking more now.
If you get odin to flash a stock rom then you can go for it but by then you should be able to fix it.
Sent from my GT-I9000M using XDA Premium App

Alright i will keep trying.
As far as the firmware goes, my gf and i both have the same phone, but she kept heres official and i put custom roms on mine (just the 2.2 because it wasn't available)
We are both on bell canada so i asked her to boot up her phone and the beginning message on hers says GT-I9000M so it freaked me out lol
I will try on my home computer,
keep your fingers crossed for me

Alright, so Odin can now see my phone (it was the damn cord, my Win 7 comp couldnt see it but my xp work laptop can)
Which firmware would you recomend flashing? Stock gingerbread or a slight variation?
I am at work right now so i can wait a bit for a good response. It'd really help me out if you could provide links and tips to the best firmware out right now (i have no problem flashing a custom ROM if it is good).
Thanks alot,
Josh

Succesfully Flashes Gingerbread 2.3.4
Thanks for all your help!!!

how did you manage to see it in odin?
i have te same problem with restarting just after first screen (after flashing to gingerbread) but i cant see it in odin so i cant flash it again?
when i connect it when turned off, a small icon appears with usb connected sound but its still not visible.
Is it maybe my win7?
help, anyone please

Did you start in Download mod? Did you kill the Kies processes in you Win7 task manager ?
If yes, sometimes Windows takes time to install the drivers (be sure ton be connected to the internet), you should also close and relaunch Odin.

i launched download mode with sdk, and now i cant start it.
i went to another pc with xp. it installs drivers but odin cant recognize it.

Well i did it on my work XP computer becuase WIN 7 wasn't recognizing it. But it turns out the whole time the cable i was using would connect to charge, but not act as a pc connection.

HELP! Flashed Wrong Kernel Stuck at Galaxy Screen on Boot

Ok I have a stock KB2 Cappy. I used Odin to flash back to 2.1 KB1 JF6
Then I used Odin 3 to flash a kernel so I can put on CM7. I am now stuck in the Boot screen.
I have no 3 button, I cannot get into download mode (my jig is homemade should i order one?)
I tried to change usb and remove the sim card to try odin again to get back into stock.
Nothing seems to work the only thing is my jig is not good either for DL Mode. I want to get back to stock so any suggestions. I tried heimandall did not work either.
I am really stuck on this galaxy s I897 screen.

Is the jig soldered? If its not make sure you are connecting the correct pins and use some black tape or something to isolate your fingers from the resistors (might screw up the actual ohms making it to boot up normally and not in to dl mode.

The bootloop was expected, you are supposed to check that you have a working button combo both before you flash the kernel (because it will bootloop and you boot into recovery and flash whatever) and before you ever flash cm7 because that is the only way to get into download mode besides a jig on aosp roms.
so, fiddle around with your jig some more and if you get it in download mode just flash the captivate gingerbread bootloaders, that will fix your button combo and allow you to proceed flashing cm7.

Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks

Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE

This is probably the easiest guide on how to make one. Layman Jig First one I did I butchered a pare car charger to make it. You can just grab one from MobileTechVideos.com for about $8.
AlphaJ1 said:
Hi Guys,
I have a similar problem. I am a total noob-I've had my I896 cappy (Canadian Rogers based) for about a year now; i fiddled with it on Saturday and also got the bootloop. I freaked out, and managed to further flash (out of frustration and confusion) the cappy with another wrong ROM, the I900. I managed to get it back into DL mode and tried flashing stock eclair or 2.2 froyo via ODIN. For some reason, whenever I start the flash (press start on Odin with the froyo 2.2 file on PDA), the progress fails at the factory section. I don't know much about jigs yet, but any tips would be greatly appreciated.
thanks
Click to expand...
Click to collapse

Hi guys,
Thanks for the link.
From what I understand, a jig is an improvised connection that allows your phone to go into DL mode. What if my phone is still capable of going into DL mode? My apologies, as I am at work.

Im not sure what you mean with your question. What the jig does is give the signal for it to go to download mode as was intended by samsung. Same theory on how your phone knows its connected to your computer, or the wall or the car charger. Its by manipulating the current between 2 pins. Keep in mind your phone should always be capable of going in to download mode assuming the hardware is working and your bootloaders are in working order.

I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.

Read my post after yours...

studacris said:
Chord in the back of the PC directly attached to the motherboard NO EXTERNAL HUBS, right click on Odin run as admin.
Once you have it working READ AND UNDERSTAND WHAT YOU'RE DOING, BEFORE DOING ANYTHING ELSE TO YOUR PHONE
Click to expand...
Click to collapse
^What he said. If that fails could be a faulty cable.

AlphaJ1 said:
I believe I read it on a different website that as long as your phone can go into download mode, then it is only "soft-bricked," meaning it can still be recovered using ODIN. I don't know If I was misinformed or not. I guess my question is, since my phone is still able to go into download mode, but the flash is still failing, did I DL the wrong ROM, or was the copy of Froyo 2.2 I DL'd corrupt? If so, is there a reliable source/site where I can download Froyo or Eclair?
I hope that makes more sense.
Click to expand...
Click to collapse
You are correct, if you can get into download mode you are not bricked. Make sure you are using the usb cord that came with your phone, plugged directly into the back of your computer. Make sure your SIM card is out, you're logged in as an administrator, and that you start odin before you plug your phone in.
If it still doesn't work, try another computer and/or another cord.

Why do people say take sim out? Ive never taken it out and had no issues. Just curious.

That is a practice from way back in the winmo days, sometimes the flash would corrupt the Sim itself. Not the case anymore for the most part. I'm with you never take mine out either.

Thanks guys, I will try this at home; hopefully it works.

prbassplayer said:
Why do people say take sim out? Ive never taken it out and had no issues. Just curious.
Click to expand...
Click to collapse
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it

apbthe3 said:
I say it because, while I've never had it screw up the SIM itself, I had a situation where I forgot to remove it and then couldn't get odin to complete a flash on several attempts, resulting in a soft brick that I couldn't flash out of. As soon as I removed the sim, Odin flashed without an issue.
Coincidence? Maybe, although I didn't change anything else. If it possibly keeps me from repeating this terrifying event, though, I'll just keep doing it
Click to expand...
Click to collapse
Did you get a red "FAIL" message on ODIN? Because thats what I got several times. My buddy also tried and he got the same thing. The green progress bar completes up till about 80 percent and gives up on me. I'll try taking out the SD and SIM cards when I get home, hopefully it works.

Hi guys, little update:
I found this on the forums and used it:
http://forum.xda-developers.com/showthread.php?t=731989
Anyways, this worked after my second try. Interestingly enough, it worked once i removed the Sim card, which is what apbthe3 suggested..great! I'm just glad my phone is no longer bricked. Minor issue though, my phone is now an AT&T phone, but unfortunately, I am a Canadian Samsung user. New problem now. My phone is no longer rooted (never was actually, but was bricked in the process), I'm happy it works, but i need to know if there are any Canadians out there that know how to revert my device back to Rogers.
Any help would be great. Anyways, the link I provided works great, so its a great resource for our American friends.

Why don't you look at Cognition 4.x.x? Froyo stock ish looking rom tweaked out the ass very fast. Good rom.

Look in development. There are a couple of threads there just for Rogers users.

[Q] I think its Bricked..and odin doesnt work

hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks

Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.

You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).

OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.

Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck

hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!

So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.

blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it

the link on that page for the 1 click odin doesnt work.

Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)

Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.

blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.

Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?

If you don't know, flash them.

ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?

The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.

so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.

[Q] Can't downgrade to GB so I can unlock phone, gets stuck at boot screen (RESOLVED)

EDIT: I FINALLY GOT ADAM OUTLERS HEIMDALL 2.2 ROM TO INSTALL.
---------------------------------------------------------------------
So I was running 4.2.2 SlimBean on my Girlfriends phone.
But found out the phone needs to be unlocked.
Then found out you can't unlock a 4.2.2 phone based on AOSP.
So I've been trying like crazy to downgrade to a Froyo or GB ROM so I can unlock phone.
But NOTHING is working.
The odin-one-click's don't work.
The Adam Outler Heimdall just keeps saying there are no drivers for Heimdall, then installs drivers succesfully, then says there are no drivers...
Any Froyo or GB ROM I flash in CWM 6.x.x or older, just gets to boot screen and won't go any further.
I'm flipping annoyed here. Help!
My googling has worn my fingers numb and I gotta have someone take pity on me and tell me what the frack to do.
I've soft bricked this phone about fifteen times so far. The dang "computer & phone" screen thing has been kicking my butt over and over. Glad I finally got a fix for that. But, I keep bricking the phone again afterwards. ugh...
HOW THE HECK DO I GO ABOUT DOWNGRADING THIS PHONE ?!?

CZ Eddie said:
The odin-one-click's don't work.
Click to expand...
Click to collapse
I use Win 7 computer, original Samsung USB cable, correct drivers + run Odin one-click as Administrator and it works perfectly every time. Had to go back to stock GB a few times, no issues.

Well I don't know what combo of driver & kernel & other stuff worked, but I finally got the Odin One Click thing working. Not all of them work, but I found one that did (I897UCKF1_withBL). Even then, it only works about 1/2 of the time.
Flashed a 2.3.3
But after rooting it, I lost WiFi ability.
And so couldn't unlock it.
And this forum is full of DEAD links for everything I need that is old enough to unlock a phone.
awwrrghhh I'm ready to throw this phone against the wall.
AT&T already gave me the code to unlock it. And I have a new unused AT&T SIM installed, though it sounds like that may be a problem also. I might need a non-AT&T SIM to unlock.