To quickly resize the FAT32 Data (ie music extra large data files etc) portion of any of the bootable SD cards use the following steps:
1. Create your SD Card from the Image.
2. Download and install Easeus Partion Master from Download.com
3. Close out file manager and any other active programs before starting Easeus.
4. Start Easeus, it will boot up and it will show the SD with the four partitions.
5. If your SD card has room that is unclaimed part of it will be gray and labeled unformated.
6. If it has room, right click on the last partition of the sd card and choose Resize/Move.
7. Now simply drag the end of the partition so that it extends the box to include as much of the unformated drive space as you want it to.
8. Hit Apply. Here is the rub, Easeus tries to save the data on that particular partition while extending/expanding the drive. I don't believe this is guaranteed so please backup anything you want to keep. But know that it is possible it might make the transition just fine.
9. Exit the program, you're done!
I've tried this and Easeus doesn't show any of the SD partitions. I've tried two different cards (an 8GB and a 16GB) on two different computers. Any suggestions? I posted this issue in another thread but nobody responded.
Bad reader?
Yeah, Partition Master only shows the first partition for me. I may try to pick up a different reader to see if that's the issue.
EDIT: I picked up another SD card reader over lunch and it also just shows the first partition. Is there some magic to showing all of the partitions on the card?
RE-EDIT: Scratch that...Windows only mounts the first partition as a drive letter but Partition Master shows all partitions properly. Cool!
So how do you access it
So you are correct and this works. My question is how do you access the SD card. If I pull it out and use a reader, windows only sees the boot sector. When I am booted autonooter 3.0 Rooted, put in the SD card and then plug into a computer it only sees the internal memory and the boot sector on the SD. When I connect it to the computer while booted in Honeycomb I do not see any drives.
Have you figured out how to load files on to this expanded area. I would love to try and play ripped DVDs on Honeycomb.
I'm able to resize the fat32 partition, but I would like to resize the internal memory so that I have more space for apps on my SD running honeycomb. Anyone find a work around for that?
Thanks
Related
I'm running Froyo off a 4GB SD card. I've followed all of the partitioning instructions and when it's in the nook the nook shows 2.8GB free space on the SD, but I can't seem to actually access it.
When I plug it into the computer via usb, only the 155mb boot partition mounts. When I put the SD card into a card reader on my computer, I can see all the partitions in disk manager but boot is the only one I can actually access.
I think I must be doing something wrong - if there was no benefit to using a larger SD card, nobody would be doing so.
Has anyone actually gotten the last "sd card" partition to mount to their computer?
If not, how can I access it to transfer music and pictures over?
It sounds like you are on Windows. Do you have EASEUS Partition Manager or something similar? What do you see? You should see the last partition, SDcard. To the right should be unused space. Right click on the SDcard partition and expand it to fill the rest of the card and apply the change. If you see something different, describe it here.
To answer your question, I have a 16GB card with Nookie Froyo and have put a ton of PDF files on it as well as some text files. I view them on my NC all the time.
Homer
I got the EASEUS parition manager, and expanded the SD card portion to the rest of the available space.
But I still can't access it! When I plug in the nook to the computer, and turn on USB storage, it mounts the boot drive! Which has the uImage and stuff. I don't understand how the hell to put anything on the SD portion of the sd card.
This is a limitation of Windows, it only mounts the first partition on a flash drive. I use Ubuntu installed via WUBI. It lets me dual boot Windows or Ubuntu. If you have your main drive partitioned so that data is separate, you can mount that partition in Ubuntu. In Ubuntu, when you insert the SDcard, all four partitions pop up. Blame Windows, and then get Ubuntu.
Homer
Short of installing ubuntu on my computer is there no program or something I can use to mount that sd partition?
Sent from my Nexus One using XDA App
ksc6000 said:
Short of installing ubuntu on my computer is there no program or something I can use to mount that sd partition?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Take a look here, don't fear the dark places.
Homer
so i either don't fully understand how images work in the SDCard itself (not on the nook), or i did something wrong and don't know how to fix the card, but at any rate, i managed to burn a 128meg image onto my 8gig sd card, didn't like the image, and now can't figure out how to get the card back to a regular 8gig card!
would love some direction. tried to search but must not be using right keywords.
didn't see any kind of format or clear option in the winimg program we're using.
thanks!
byproxy said:
so i either don't fully understand how images work in the SDCard itself (not on the nook), or i did something wrong and don't know how to fix the card, but at any rate, i managed to burn a 128meg image onto my 8gig sd card, didn't like the image, and now can't figure out how to get the card back to a regular 8gig card!
would love some direction. tried to search but must not be using right keywords.
didn't see any kind of format or clear option in the winimg program we're using.
thanks!
Click to expand...
Click to collapse
On your Nook I believe you can go to Settings, Device Info, Mount the SD card if it's not mounted and then format it. It'll erase it and you'll have a blank SD card. If you're going to put a different image on the card I don't know if you even need to bother formatting, but I' not sure about that stuff.
does the nook format work differently than a computer format? because i burned a 128meg image onto an 8gig card and now even a computer format won't get the whole 8gigs back... just the 128 megs. it's like it's got invisible partitions on it or something.
Partition
Try EASEUS Partition Manager to change the partition size/format card.
byproxy said:
so i either don't fully understand how images work in the SDCard itself (not on the nook), or i did something wrong and don't know how to fix the card, but at any rate, i managed to burn a 128meg image onto my 8gig sd card, didn't like the image, and now can't figure out how to get the card back to a regular 8gig card!
would love some direction. tried to search but must not be using right keywords.
didn't see any kind of format or clear option in the winimg program we're using.
thanks!
Click to expand...
Click to collapse
byproxy... here is the easy way...
1) Go and download "EASEUS Partition Master 7.0.1 Home Edition" --- just google it (the home edition is free and downloadable)
2) Put your microSD card into a card reader and plug into your computer
3) install EASEUS onto your computer and run the app
4) Once app is started, located your microSD card amongst the list of drives listed
5) select each one of the partitions on the SD card, and delete them individually
6) Once all partitions are deleted, make sure that you are still selecting the microSD card, and select the option to create partition (it may just say create)
7) Make sure you select FAT 32
8) Then select FORMAT
9) Lastly, click on APPLY and it will do all the things above. So in short you select all the actions that you want... and only in step 9 will it execute all those actions.
Please make sure that any changes you make are to the SD card and not any of your other drives. Last thing I would want is for you to accidentally format your Computer, NAS, or your non-SD card. =)
Enjoy...
sweet. exactly what i was looking for. thanks gents!!!
hvuong2 said:
byproxy... here is the easy way...
Enjoy...
Click to expand...
Click to collapse
OK, but isn't it easier just to do it in the Nook or am I missing something here?
...worst case there's a low level SD card formatter from Panasonic (IIRC might be Toshiba) that will do a complete low level format and has recovered uSDs for people using them with Nintendo DS dev carts...
A Google search should turn it up, or a thread on a DS site which might have a link to it. It'll be a little windows program...
(I believe that windows and most devices just do sort of a quick format of the uSD, and so can't recover from some problems like re-partitioning of the card... so monkeying around with a partition editor and assigning the card to be one big partition then re-fromatting under windows or some other device MIGHT work as well...)
[EDIT]
oops, I see post #5 has the re-partitioning solution as well... another way to do it would be to backup an image of the card BEFORE burning something like autonooter on it then restore that original image to card once finished with whatever you were trying out... it's what I did when I tried autonooter w/my old 128MB card, in linux in my case a
dd if=/path/to/sd/card of=./somefilename
dd if=./autonooter.img of=/path/to/sd/card
then later
dd if=./somefilename of=/path/to/sd/card
sd card path under linux is likely to be /dev/memc<device ref characters?>
You should also be able to do this under windows with the utility recommended for windows users to use with the autonooter image, as I'm guessing that it's just a GUI wrapper and a windows compiled version of the dd utility...
[/EDIT]
Varying opinions
BarryR1 said:
OK, but isn't it easier just to do it in the Nook or am I missing something here?
Click to expand...
Click to collapse
Some believe that there are issues with formatting on Nook... depending which ROM you are running. The surefire and safe way, is to do it from a PC.
Nook should format, but may not partition correctly.
hvuong2 said:
Some believe that there are issues with formatting on Nook... depending which ROM you are running. The surefire and safe way, is to do it from a PC.
Nook should format, but may not partition correctly.
Click to expand...
Click to collapse
No, the Nook will format the *device* and not a partition, so it always works. But you don't want to do it if you've installed NC or HC to eMMC.
If you're using Stock rooted, just boot without the card in the device, put it in, format. Done.
Or if you're on a real os just format the device... mkfs.vfat /dev/sdX
A couple of questions:
- I've read that the SD based images of Froyo and HC actually put 4 partitions on the SD card. It was suggested that, since the 4 partitions likely won't use all the available space on the SD card, it's possible to expand the last partition to use the rest of the card. I downloaded EASUS partition manager and tried to do that but it appears that it's only seeing the first small partition. This is on Win7 64 bit. Is EASUS the right tool for this and, if so, how do I get it working.
- So far I've used win32diskimager for writing the images to SD and it's worked well. Since I've only got a couple of SD cards I wanted to make a backup of the contents of one so I could try a different build on it. When I read the card I only got a 100+k image instead of the 2G image I expected. I suspect that's the same first partition that EASUS seems to show. How do I create an image of a card?
hmm....that is kinda weird. I use EASUS myself and have Win 7 64 bit also. that said I just did the process to expand my bootbale HC sdcard to get all the sdcard storage space back after burning the bootable image to the sdcard. One thing I did notice tho is that if you have EASUS open prior to plugging the sdcard into the comp it doens't read correctly. So I reboot my comp leaving the sdcard plugged in. Once the comp came up I went into my comp to see what the size showed. The card was labeled a "boot" and the size was only about 120Mb. I then closed the window and fired up EASUS and it showed as Disk 2. Under that I have the small boot partition, along with an ext2 & ext3 partition each about 675Mb in size. Last partition was the sdcard and under that showed "unallocated space" of about 13Gb. I clicked ( ie highlighted ) sdcard and then was able to click the Resize button on the tool bat in the progrm. From there I grabbed the slider and slide it all the way to the right and it set the sdcard partition to just under 14Gb. Click okay and then last but not least just click the Apply button on the tool bar and it resized it.
As for your other question I can't comment at this time as I don't have my Nook or my sdcards with me to take a look at what they show up as for size when read. I'll try to take a look when I get home and report back on what I'm seeing.
Have you tried using the Win32diskImager read function?
I'm not near my computer, but I am pretty sure there was a read function in there..
Sent from my LogicPD Zoom2 using XDA App
Yes I did use the read function but the image file created was only 100-some k, way smaller than the original Froyo image that I wrote to the card.
I wonder if the SD slot on my laptop and/or the SD adapter that came with the card is funky, preventing a proper read of the card. I'll have to try the other adapters or an external card reader I have to see if I have better luck.
If I'm not mistaken the 100-some k partition is normal as it is only reading the boot partition IMG. My 8Gb bootable sdcard comes up showing as 119Mb when you look at it in My computer and check the properties. Reason being is Windows is not reading/seeing the other partitions. However in EASUS all the partitions ( 4 of them boot,ext2,ext3, and sdcard )should show up and that should allow you to resize the sdcard as that is the only thing you want to mess with anyways.
As I said earlier I will check this out tonight when I get home as I have at least 3 different bootable sdcards, and also a 16Gb sdcard that has HC flashed to it so I can run the OS off of it and still leave my CM7 setup on eMMC. One one darn day I don't bring it with me to work......lol, typical I tell ya.
I had tried to extend mine using windows DISKPART at first, and all of the partitions were listed, but they were all marked partition 0. EASUS did the job for me when I couldn't select the proper partition in diskpart (all of them being partition 0 confused it). Windows Disk Manager also saw all 4 partitions, but couldn't do anything with the last partition. Verify you've got 4 partitions using either diskpart or disk manager - if you don't see all 4 partitions in those programs, something went wrong with your image burn.
Unlikely that anything's wrong with the burn since Froyo boots and runs fine off the card.
I tried the card in the other adapter I have in the laptop slot and EASEUS still doesn't see the other partitions. Then I tired a cheap USB reader I have. EASEUS saw the partitions and allowed me to resize the fourth partition. Another hurdle cleared. Note to self use card reader from now on
I have spent over an hour reading threads and searching, cannot find what I need.
I have CM7 on eMMC.
How do I get my sd card back to 8gb?
SOVLED
-My Computer-Right click on SD card Drive- Format - Card is now 8 Gigabytes
Had this last night but try formatting the SD card within your nook. I had an SD card with 1 gig image and was having the same problem.
Just to clarify. Use the format options within the nook. Sorry not in front of Nook at the moment.
Larry94 said:
-My Computer-Right click on SD card Drive- Format - Card is now 8 Gigabytes
Click to expand...
Click to collapse
Tks, but that did not work
Zhousibo said:
Just to clarify. Use the format options within the nook. Sorry not in front of Nook at the moment.
Click to expand...
Click to collapse
I read that on CM7 on eMMC when doing that it formats the boot on the nook not the sd card, so did you do this or just think its the way to do it. THanks
Use this program, the free edition:
EASEUS Partition Manager
Windows can only see the first partition on your card. There are probably 4 partitions left from your emmc install. Plug your microSD card into your computer and launch EASEUS. You should see the driver letter assigned to your microSD card and 3 other unassigned partitions on your card. Right click on each of those partitions and delete them. Then either resize the primary partition Windows can see to the full size of the card, or delete that partition, then create a primary partition on the card that uses the full card size. You should now have your full capacity back.
rog152 said:
I read that on CM7 on eMMC when doing that it formats the boot on the nook not the sd card, so did you do this or just think its the way to do it. THanks
Click to expand...
Click to collapse
No, I actually did the format using CM7 on my Nook Color. Bit hazy on the exact details, but if you look at the SD storage section in the Settings you should see the different SD cards and will show which to format. I had used my 8 gig SD card as a 120 meg SD boot with CWM so this SD card kept showing available space of about 120 meg (so I chose this to format).
'Should' be fairly obvious but can understand your hesitation.
FYI, I tried Easues Partition on my Windows 7 64 bit machine but did not recognize. Might be worth trying XP or Linux if you have but I would test the above option (Backup everything if concerned). I had just flashed CM7 to my nook so wasn't too bothered if I lost anything.
I can check when I get home.
rog152 said:
I have spent over an hour reading threads and searching, cannot find what I need.
I have CM7 on eMMC.
How do I get my sd card back to 8gb?
Click to expand...
Click to collapse
Windows only sees one primary partition, so you have to use a partition manager to delete the other primary partitions. MiniTool Partition Wizard claims to work in all versions of Windows, I only have 32 bit Vista. Or you could use Linux in a virtual machine such as Vmware, it's free for home use.
Alakar said:
Use this program, the free edition:
EASEUS Partition Manager
Windows can only see the first partition on your card. There are probably 4 partitions left from your emmc install. Plug your microSD card into your computer and launch EASEUS. You should see the driver letter assigned to your microSD card and 3 other unassigned partitions on your card. Right click on each of those partitions and delete them. Then either resize the primary partition Windows can see to the full size of the card, or delete that partition, then create a primary partition on the card that uses the full card size. You should now have your full capacity back.
Click to expand...
Click to collapse
Thanks, this worked.
also this link
http://nookdevs.com/NookColor_Format_and_partition_your_SD_card_back_to_a_usable_state
I use SD Formatter, works great
I am running CM7.1.0 on my nook color off the SD card. I used the YouTube tutorial by the Crash Tech Dummies. Now I notice that I am only allowed only 1GB of storage on the SD card. I used partition wizard to increase the space on the 4th partition like I was instructed. I would prefer to install the apps to the SD card so I have already burned through the space provided. Bellow I have listed what I see in partition magic. Should I move the free space in the 4th partition into the first? Or should I load the cm7 onto the HD of the nook? I am a bit of a noob but I have gotten this far.
My 16 GB card partitions read:
G:boot 30.32mb used 118.69mb unused
*: 179.55mb used 283.25mb unused
*: 367.34mb used 597.50mb unused
*: 6.68 gb used 6.61gb unused
Any suggestions would be great…I don’t know what else to do.
Help me XDA Developers you my only hope…
Steve da Noob
First of all, what is "1GB of storage on the SD card" you're talking about?
Secondly, the 4th partition has nothing to do with holding installed apps.
votinh said:
First of all, what is "1GB of storage on the SD card" you're talking about?
Secondly, the 4th partition has nothing to do with holding installed apps.
Click to expand...
Click to collapse
when i go into settings, apps, storage use, sd card it says 1.0 gb used 0.00 free...i was assuming this was referring to a section of the sd card. I also assumed that the 4th partition was being used by something do the fact that half of it has been used by something...
Steve
Quoting from VeryGreen's instructions
Partition layout for the SD cards depends on size:
Less than 600M - unsupported.
up to 1G cards gets: system of ~300M and data of the rest of space. No FAT partition
2G cards (more than 1G up to 1800M) gets: 300M system, 612M data, rest is FAT sdcard
more than 2G cards gets: 460M system, 975M data, rest is FAT for sdcard.
Your first partition is the boot, nothing else should go on here.
Your second partition is the system partition containing the OS and system applications
Your 3rd partition is the data partition used for downloaded apps. The space allocated is adequate for a decent number of downloaded apps but may get tight if you load lots of games. You can move apps to "SD" which is the 4th partition if you get tight on space.
Your 4th partition is the "SD" user data area. This can be used by apps for their working folders and is also where you put stuff like media (pictures, music, video). It is the partition that will normally get mounted as a drive on a PC when the USB is connected and USB disk storage is turned on via the notification panel.
You say the 4th partition has got 6.68GB data on already? That should start off fairly empty until you put stuff on there.
I do have music and pictures on the device that i uploaded so that's where the items on partition #4 came from.
When i try and move the applications to the sd card it tells me that there is not enough room on the card. Also when i plug in the nook to my computer without the sd card in it shows the applications on the internal hard drive. Should i try and move space from the 4th partition to the 3 and see if that helps?
Thanks,
Steve
WileECoyote79 said:
When i try and move the applications to the sd card it tells me that there is not enough room on the card. Also when i plug in the nook to my computer without the sd card in it shows the applications on the internal hard drive. Should i try and move space from the 4th partition to the 3 and see if that helps?
Click to expand...
Click to collapse
I'm a little surprised it says there is no room available to move an app if the partition still shows 6GB free. Have you tried using Apps2SD app. This will show space available and is a convenient way to move stuff around. Another possibility is that you are trying to do this whilst USB connected to the PC. That won't work as the Nook software can't access the SD partition while it is PC mounted.
Currently you said there was nearly 600MB free in your 3rd partition where new downloads go. If so I wouldn't bother with trying to move stuff until you get tight on space there.
If that happens and you just need to create some more app space in the 3rd partition then you can use a partition tool on the PC like minitools to reallocate some of the space from 4 to 3 to give yourself more app space.
I tried the apps2sd and i get the same error. It sends me to the same place as i discussed above and when i tell it to send it to the sd card i get the same error. "failed to move application, there is not enough storage space".
I am not trying to move anything while i have the nook attached to my computer. the only time i really used that function was to add music and some pictures.
This is really starting to get frustrating. I do appreciate all your help.
Is another option loading CM7 to the nook instead of the SD card?
I only used the SD CM7 method for a short while and I don't think I ever tried to move apps to the "SD" so maybe there is an issue trying to do this.
I think you have two choices.
If you stick with SD then increase the data partition to give yourself more room for apps.
If you never want to use the B&N OS then the internal memory is the best option. The SD card then becomes a single partition user space card and you can certainly move apps to it. If you do this then also consider using the zip that increases the internal data partition to 2GB to give yourself more internal room for apps anyway.
bobtidey said:
I only used the SD CM7 method for a short while and I don't think I ever tried to move apps to the "SD" so maybe there is an issue trying to do this.
I think you have two choices.
If you stick with SD then increase the data partition to give yourself more room for apps.
If you never want to use the B&N OS then the internal memory is the best option. The SD card then becomes a single partition user space card and you can certainly move apps to it. If you do this then also consider using the zip that increases the internal data partition to 2GB to give yourself more internal room for apps anyway.
Click to expand...
Click to collapse
I think ill try adjusting the partition and see if that helps. Like you said if it doesn't ill look into loading onto the internal memory. I am not to impressed with the B&N software and i use the kindle software for my e-reading.
Is there a method you could recommend for loading it onto the internal memory? A step by step tutorial would help out lots. I am not familiar with the zip you are referring to.
Thanks,
Steve
WileECoyote79 said:
I think ill try adjusting the partition and see if that helps. Like you said if it doesn't ill look into loading onto the internal memory. I am not to impressed with the B&N software and i use the kindle software for my e-reading.
Is there a method you could recommend for loading it onto the internal memory? A step by step tutorial would help out lots. I am not familiar with the zip you are referring to.
Thanks,
Steve
Click to expand...
Click to collapse
Yes. If you don't think you'll use the B&N then internal is the way to go. Especially if you use Amazon Kindle for your books.
The easiest method in my view is to use the Eyeballer Clockwork boot SD and use that then to flash the main ROM and gapps zips.
You can find the most straightforward instructions here but I would use the KANG MiRaGe ROM as the main OS.
http://rootzwiki.com/topic/8208-guide-install-cm71-clockworkmod-to-emmc-all-nooks-updated101111/
The 2GB partition zip can be found here
http://forum.xda-developers.com/showthread.php?t=1094371
This can actually be applied at same time as installing the OS and gapps. Put the repartition zip, the ROM zip and the gapps zip on the Eyeballer SD card then use the menus to flash repartition, ROM and then gapps.
If you also follow the advice to put ROM manager and flash clockwork to the internal as well then future updates become very easy and do not even involve removing the SD card.
Ive decided that the best solution is to install on the internal rather than the sd card. i think this will be less of a pain in the butt in the long run.
being new to android and coming over from apple (booooo) is there anyway to easy re-install the apps that i have already downloaded? I do have one that i did pay for.
Steve
easy way to re-install? hmmm, maybe not but I would suggest you make the backup for all of your apps first (meaning save all .apk files to somewhere else)
ok here goes nothing lol
Titanium backup would allow you to back up all your apps. If you save the Titanium back up folder (say onto a PC via USB) then after you have done the internal install then put the Titanium back up folder back onto the fresh SD card and you can restore the apps back from there.
everything seems to be working just fine...thank you all for the help and advice...
Steve