Related
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
ApplCobbler said:
Okay so, I used the Odin JI6 Froyo flash and everything went peachy. Also installed the OCLF and the Voodoo one from off the market.
Problem is that the root wasn't total/complete and the update.zip was replaced but could not be used in full rooting or something along those lines (I'm not certain).
Anyhow, the phone worked great for the last three days, then this evening the browser wasn't refreshing facebook so I restarted the phone. After the AT&T logo it went blank and it vibrated like a beating heart constantly before restarting again after about 5 minutes, which then made it beat like a heart again etc.
I tried going to the boot screen/safe mode and reinstalling the update.zip (which didn't work because of the failed root), tried clearing my data cache, and then also i formatted the sd card. Nothing.
After that I tried putting it into download mode and flashing Odin, which didn't work. It said it was sending the PIT files but stalled there and never changed. I tried a master clear and it didn't go anywhere either.
Any advice?
Click to expand...
Click to collapse
I feel your pain. Been there, done that. Although your process of bricking reminds me of a more sophisticated approach....lol....mine was out of total complete noobness.
Question:
1) Can you manually boot into download/ recovery manually using 3-button combo? If so you have hope (meaning your phone is basically "un-brickable").
-Bet that made you feel better huh?
-If you can't use 3-button to go into either modes, then you are in the same boat as i was. Hope you are still within your 30 days, or at least warranty. One way to tell if you can/ can't go into either modes is to check your "Batch #."
a) remove battery
b) look below your Serial Number
c) if your Batch # = 1007 = You are safe
d) Batch # = 1008 = good luck
2) When you say Brick, do you have the unfortunate "Phone (!) PC" screen? If yes, then its a "soft brick." If No, then its a "hard brick." I would start to worry.
3) According to your post, it sounds like you have the Regular Odin and NOT the One click version, correct? If you have regular Odin, i would at least try the One click. Regardless, both versions should be able to get you back to stock (JF6), but we already know how well your current version Odin has gotten you.
If you need help, there are TONS more knowledgeable people here in the Captivate forum than I. They should be able to help.
Good Luck!
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Stop trying to flash Froyo. Flash back to stock then master clear. Then go read the threads in the development section of the forum before flashing anything. The fact that you tried to apply Voodoo to Froyo and you tried to use one click lagfix on Froyo shows you haven't read and don't know what your doing. You corrupted something by flashing incompatable stuff, flash back to stock and master clear for now. Read a bit and then flash Froyo.
ApplCobbler said:
1. Yes I can go into download and recovery mode. I've attempted to reinstall the 2.2 off odin but it doesn't take. It is the One Click Odin Froyo, it does not work. The Comm screen is yellow, and the logs just say it's loading the PIT and doesnt ever change from there.
2. I have seen that phone ! computer screen, but I'm not stuck at it. When that came on I held the vilume buttons and the power button and it went back to regular boot up (which obviously still doesn't work).
3. It is the one click. I'm not smart enough to use something that involves more than one click.
Click to expand...
Click to collapse
LOL . I as well. I know enough to be dangerous.
Now, on to business. If you actually read what Rhiannon has posted for you, and click on the actual link itself, you will realize that the version of Odin you are using (yes the one click) is NOT the correct version for flashing back to stock (JF6/ Eclair.....NOT froyo). Remember, if all else fails....."The One must return to the Source...." <-----Plus 9,000 to whoever can guess where thats from.
Obviously your phone falls within the 1007 since you have the Luxury/ Advantage of manually entering Download/ Recovery mode....i wish i did.
Rhiannon224 said:
You should've read the forums more before flashing and saved yourself this headache. You will need this to flash back to stock.
use thishttp://forum.xda-developers.com/showthread.php?t=731989
Dowload Odin and the drivers on the first page of the thread. Install the drivers. Run Odin as Administrator. You need to then remove your SIM, battery and external sd card if you have one. Hopefully your button combo will work to get you into download mode. Next, put battery back in, hold the vol + & - buttons and plug in your USB from pc to phone and do not let go of the volume buttons, do not touch power and you should then enter download mode. Yellow screen with android shovelling. Odin should see your phone, push start on Odin and let Odin do it's thing. When Odin finished and your phone reboots you will be back on stock JF6. While your phone is powered on and on your homescreen master clear with Odin.
You need to read a bit before flashing anything again. One Click Root doesn't work with Froyo, neither does Voodoo. Had you taken some time and read you would know this.
Good Luck, I hope this helps.
Click to expand...
Click to collapse
Well Said!
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
OP when someone says flash back to stock they don't mean Froyo. I don't mean to sound harsh, really I want to help you, but you have to read and follow instructions when you ask for help or it becomes frustrating to all that try to help you. If you want to get out of the mess you are in read my original post and use the Odin thread I linked for you please.
Click to expand...
Click to collapse
I see you are still on Cog 2.2 B5......dont care for 8 or any of the new ones? Or Sheps? What's your story?
Mine is simple....Patience. lol
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Rhiannon224 said:
Thanks Spartan, I'm guesing too much skimming and not enough reading.
Click to expand...
Click to collapse
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Rhiannon224 said:
I am on Cog beta 5.5 with 2e recovery kernel, I swapped the kernel myself before DG updated. It has working GPS and it is pretty zippy, I am not noticing lag. I was going to flash beta 8 last night but there were some modem issues and people losing 3g. Then 8.1 came out and I read the changelog and it isn't much different from my setup. I didn't go to beta 7 because Tw Launcher was removed and you need that for Kies to see your phone so that's a no go. Shep is using an I9000 kernel and I don't want to mess with I9000. I liike to flash my phone but I need to use it as a phone. I have tried some ROMS that I didn't think worked as well so I stick with what has worked best for me. I have all the mods on it, stock lock screen, battery circle mod, and gps works. I may try AOSP this weekend but I work all week not at a computer and I can't just flash all day. I find that things can go wrong and it takes time to reconfigure apps and contacts and if anything goes wrong it sould take a while to fix and I haven't had time to mess with it this week. I see you are still on 2.1, that is patience. I tried out Froyo and when gps worked for the first time ever since having the phone I'm sticking with Froyo. I am waiting for Voodoo to make ot to 2.2 then it will be perfect.
Also, I forget to edit my signature if i only try something for a day or two. I was on Froyo for a few before i remembered to change my sig.
Click to expand...
Click to collapse
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
spartan062984 said:
It's all good. I was just curious, that's all. As far as the 19000, that makes two of us. I tried it, hoping that the voodoo + OCLF combo would work.......WRONG! lol
When 7 came out and i too noticed the TW removed, i thought Everyone would take a plunge into that, since many have complained that TW i/o was just unbearable. Oh well. As far as everything else you mentioned, i feel the same way.
Edit: "I9000"
Click to expand...
Click to collapse
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
ApplCobbler said:
Alright, Jesus I get it, I didn't do my homework; repeating it over and over isn't going to help any more. Thank you for the info, I'm downloading the right Odin right now and I'll do the fixes you said.
Click to expand...
Click to collapse
Again, sorry if I sounded harsh, i am just trying to help you get out of the mess you're in. You can flash Froyo in the future you just need to learn about these ROMS and fixes so you don't have these kinds of headaches. I will stop repeating now. i really hope this works. I know your stressed and wasn't trying to give you a hard time, I just thought you were missing something and I am from NY and we are pushy Let us no if you get it working.
I have made some mistakes along the way too and it was because I didn't read the instructions clearly so I do understand how you felt.
Rhiannon224 said:
I know you were curious, I figured I would just tell you my story. I froze Tw Launcher with TIBU for now, I've used Launcher Pro for months and didn't wanmt a second running in the backround, i will unfreeze it when I need it. Yeah, I try stuff anf when it doesn't work the way I need i go back to what works. I've been using DG's stuff since SRE and I update when it is a better package for my needs, so far his stuff works for my needs. I want Voodoo though, lol. Sory to hijack the thread, lol.
Click to expand...
Click to collapse
""Sory to hijack the thread""
I started it. No worries. I too would love to have voodoo. So far, with stock OS, ext2 + OCLF seems to work for me....for now. Keep in mind that i too would like to have the functionality of a Phone. That was my intention in the first place...lol.
Trying to find a quick ROM recommendation that is safe to get started with my AT&T i897.
Darkys seems popular but then in the install guide it says ...
The Samsung Galaxy S comes in several types. The ones that are compatible with Darky's ROM, are the GT-I9000 (International), the Verizon and Bell South. Check your Firmware Version.
So it looks like I should not use this with my AT&T i897.
Then the Rogers ROM talks about i896, so I guess cannot use this either.
Any quick recommendations for an i897 ROM to get started?
Are any 2.3 ROMs out yet?
No stable 2.3
I would not try darkeys for your first flash.
Don't get hung up on phone model if it is in captivate development then.... Captivate friendly
Andromeda
Cognition
Phoenix
Continuum
And many more are good
Before you flash do you understand how to do it? Better to learn before then panic later
mcord11758 said:
Before you flash do you understand how to do it? Better to learn before then panic later
Click to expand...
Click to collapse
thanks ... hopefully but it is a bit stressful .. i had some long hours with my liquid when it went wrong!
I think I know how to do it .. just following this ..
http://forum.xda-developers.com/showthread.php?t=884364
my phone has ..
2.1-update1
I897UCJF6
2.6.29 [email protected] #2
I am skipping the titanium backup step as I dont need to keep any apps or settings.
I am skipping the ODIN step because I think I am already on the stock firmware (and I only have access to linux and ODIN is for windows and I would need to use that other replacement that is compiled for linux).
So I am just doing the rooting and clockwork recovery steps.
Does that sound ok?
What build is your phone? Located under battery? Something like 1008
heimdall
You may need this down the line, flash stock with linux
http://forum.xda-developers.com/showthread.php?t=755265
mcord11758 said:
What build is your phone? Located under battery? Something like 1008
Click to expand...
Click to collapse
1007 .. Does this make any difference?
sml12 said:
1007 .. Does this make any difference?
Click to expand...
Click to collapse
It can but you are fine.
A suggestion, download android id changer from market. Open app, select save id. It creates a file in your internal sd called update.id. When toy flash a ruin dl the app again, load id, change id.
Your across id is unique to your device but is lost with flash, this keeps it
sml12 said:
1007 .. Does this make any difference?
Click to expand...
Click to collapse
Yes, it does. For phone with build 10.10 and later, there is a different process to restore stock. Odin one click doesn't work well.
Another thing you should do is backup your /efs directory specifically nv_data.bin.
Sent from my SGH-I897 using XDA App
So if I install a custom ROM and then want to try another custom ROM ... do I need restore back to stock with ODIN or HEIMDALL before every custom ROM flash?
sml12 said:
So if I install a custom ROM and then want to try another custom ROM ... do I need restore back to stock with ODIN or HEIMDALL before every custom ROM flash?
Click to expand...
Click to collapse
No. you want to be carefull of lag fixes but for the most part they are all compatible. This week I went from docs to andromeda to continuum to paragon. I never flashed stock
which was your favourite ROM of those examples?
i wonder when you really need to use ODIN or HEIMDALL?
For someone who had not flashed before I would go with andromeda. It is a nice rom and is stable and fast. or you may want to look at phoenix. Active friendly devs that respond to questions.
I am on paragon right now and I really like it. The rom had an over clocked kernel which I switched out because oc is not my thing. You can't go wrong with any that I mentioned.
Which rom is best is a matter of opinion.
If things go wrong with a flash is when you need to flash stock
Try the one in my signature. And the scores say it all. I get home with about 50-60% battery after a moderate use day (1 hour talk and 1 hour of activities that keep screen on, apart from push email accounts).
Thanks guys.
I'm ready to get started .. will report back soon
Ebvad said:
Another thing you should do is backup your /efs directory specifically nv_data.bin.
Click to expand...
Click to collapse
I searched for this file and could not find it
EDIT .. let me look in file system not SD card and not internal memory.
EDIT .. installed ASTRO and looked in operating system files. I found the /efs folder but it was empty. Searched for nv_data.bin and could not find the file.
sml12 said:
I searched for this file and could not find it
EDIT .. let me look in file system not SD card and not internal memory.
EDIT .. installed ASTRO and looked in operating system files. I found the /efs folder but it was empty. Searched for nv_data.bin and could not find the file.
Click to expand...
Click to collapse
Try super manager
I wasted some time today .. tried Andromeda, Paragon, Serendipity .. the market seemed to crash on Paragon ... Andromeda was nothing special ... but then tried Continuum and that is really awesome!!
So I've stuck with Continuum for now
sml12 said:
I wasted some time today .. tried Andromeda, Paragon, Serendipity .. the market seemed to crash on Paragon ... Andromeda was nothing special ... but then tried Continuum and that is really awesome!!
So I've stuck with Continuum for now
Click to expand...
Click to collapse
Different strokes for different fokes. Find what you like today then flash something else tomorrow.
mcord11758 said:
No. you want to be carefull of lag fixes but for the most part they are all compatible. This week I went from docs to andromeda to continuum to paragon. I never flashed stock
Click to expand...
Click to collapse
I have read the pages on flashing with CWM, and I normally Odin to stock and Master Clear. How do you flash without doing this and not causing problems? Thanks!
Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!
backdownup said:
but i'm really interested in flashing this rom (will be my first one)
Click to expand...
Click to collapse
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.
MikeyMike01 said:
Speedmod is not a ROM, but a kernel.
As to your other questions, you have a LOT of reading left to do.
Sent from my Captivate.
Click to expand...
Click to collapse
Agreed. Just to be save do alot of reading before attempting anything really lol. There are stickies in the Development section start there.
Ok so I did a little more reading. I896 and I897 are essentially the same. I'm not flashing a rom, just a kernel, so there should be no issue with the 3G problem mentioned in the wiki.
It won't change my rom or anything about the device other then how the filesystem works.
Thanks!
backdownup said:
Hello,
Sorry to sound like a complete noob in advance!
I have a new Samsung Captivate I896 on Rogers in Canada. I have ryans OCLF lagfix installed atm but i'm really interested in flashing this rom (will be my first one) and am wondering if it will work on this phone.
Also, is it just a backround fix? Will I still be able to use launcher pro, and will my phone still look the same with Froyo 2.2?
thanks in advance!
Click to expand...
Click to collapse
Hi, I'm pretty new here too, and I have to tell you that know one will give you a straight answer. There's a lot of' tribal knowledge', and it seems that people would rather teach you how to unbrick your phone than to flash it without issue.
First of all, hook up to Samsung Kies and update your phone to Froyo. If you are on Rogers it's an official update, don't worry about flashing any other roms yet.
Next, Use the option in the OLCF to unlagfix.
Next, you will need to root your phone. OCLF is practically obsolete, as the developer does not update anymore. Your best bet is Superoneclick. Read all instructions first. It is very easy and effective.
After you have the phone rooted, you can now install Titanium Backup. This will save all of your apps, contact info, settings, virtually everything on the phone, it will save them to a folder on your external SD. drop and drag this folder to your desktop in case anything goes wrong. I never had a problem.
You should backup your kernel. I used Neldar's SGS Kernel Flasher. It will save your kernel as an 'update.zip' in your root folder. Drag this to your desktop and put it into a folder called 'i897 orig kernel' or what have you, in case something goes wrong. I never had a problem.
Now you can flash SpeedMod. The developer's website, which is linked to in the thread's first post, will walk you though it. You will first need to install ODIN. The SpeedMod developer has a step-by-step on how to flash SpeedMod using ODIN on the developer's page. Make sure you choose a Speedmod Kernel that is intended for the Captivate, not the I9000, and that you chose the one for ODIN, not the ClockWorkMod version. Follow the steps in the Developer's page.
When you have done that, reboot into recovery mode and you should see Green Text. From here you can enable the lagfix and other tweaks. use the volume keys to select the option you want and the power button to select. under the options, it will show you which tweaks you have enabled or disabled.
Remember to select the most stable SpeedMod release, the one that is posted in the Forum (K12U-T4) is a TEST VERSION, hence the 'T'. The latest stable version as of this writing was K12T, as posted in the developer's page. I have had great results with this one.
You may find that you don't need to flash a custom ROM, I have found this setup very satisfying.
Good Luck!
Wow,
Thank you so much clemmie! That's was succinct and very helpful, especially the part about the proper way to back up my stuff.
I uninstalled OCLF just now, and it seems my phone runs at the same speed (aka fast) as it did with the lag fix installed!
Going to flash this kernel tonight or tomorrow, I'll let you know how it goes.
Thanks again!
Good to hear. There would be a lot less smoke and mirrors if people would just be straightforward and post step by step instructions with links, to give people what they want. I hope what worked for me will work for you, and I encourage you to share what you learn as well.
Kernel flash done! Screen is initially very different looking thanks to the amoled mod. Success! Backed up, thanks for all the help.
hey clemmie,
i heard that there's some issues with voice quality due to the Speedmod kernel being initially i9000-based and that it's recommended to flash a i9000-based modem. Are you having any issues with using a stock i896 modem or do you recommend something else?
Yeah, that is true, but I haven't had any problems with the stock modem. The phone works as well in-call as any other I've owned. I wonder if there is a difference between the AT&T build vs. the Rogers build. It seems that it's the AT&T folks that have issues.
Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.
olwe said:
Hi,
I've been wanting to do this but I'm a bit wary if this will put the ATT splash screen on boot as well. Also, I like how my phone looks like now with ADW launcher and beautiful widgets installed, I'm just wondering if installing this mod would change my appearance settings too.
Click to expand...
Click to collapse
Are you on Rogers? Earlier versions of the SpeedMod kernel had the AT&T splash screen, but newer versions have a simple black screen similar to the stock Samsung boot logo.
Installing the SpeedMod kernel will not change the configuration, apps, or settings of your apps. There are some settings that you can tweak in recovery mode but they are mostly file system tweaks. You will however notice that screen resolution is sharper. Your phone will run smoother and more efficiently with better battery life. You can still flash any custom or stock ROM with SpeedMod or without SpeedMod.
Yes I am on Rogers. However, I can't seem to find the stable version K12T that you mentioned on your instructions from the developer's page.
If you click on the hotlinked 'SpeedMod' in my 'tutorial' post, it will take you to the XDA page dedicated to the SpeedMod revisions. Right now there is a 13A Test version posted, but the latest stable version is now K12U. If you click where it says 'more info and downloads', it will take you to the developer's(Hardcore) blog, 'Tourist In Paradise'. The revisions are listed there. I would bookmark this page and check back frequently, as Hardcore is constantly updating. However, I'll link you to the latest stable release for ODIN, K12U:
https://docs.google.com/uc?id=0B-3n...WJmNTUtZDVmNThmMmNhZTRm&export=download&hl=en
Thanks for that! I just did this and although it didn't show the ATT boot screen, it shows the Galaxy S I 897 screen after the I 896 though. Thanks again!
Glad to hear you had success. Not so hard after all, eh?
After using this for a day or two:
I can't believe how fast my phone is. I thought it was fast before with (and then without) the oclf. I can barely keep up!
Battery life seems improved.
Screen is perfect. The lowest brightness setting is much better and more comfortable for low light usage.
I lost 1000 points off quadrant, but quadrant doesn't matter.
The only real downside is call quality took a hit. It's a bit static-y and echo-y.
I'll look into this though and see if I can find a solution, but if you have any tips let me know.
Looks like you are a candidate for a modem flash. Let me know if you find something that works, there is a lot of info on swapping modems for SpeedMod. Maybe I'll try one too!
Hey clemmie (or anyone), if I want to install voodoo lagfix - how abouts would I do that if the SpeedMod kernel already comes with / is based on sztupy's Universal Lagfix (enhanced) and if voodoo is a kernel itself (unless I'm wrong about this)?
If you flash the SpeedMod kernel, voodoo lagfix comes integrated with the kernel. It's a master of enabling it from the recovery menu.
Sent from my SAMSUNG-SGH-I896 using XDA App
Hey Guys I put together a Q&A thread for this rom to prevent tons of new threads about rom Spicific questions from new users.. Please feel free to post any questions here.
As Aslways there is no Flaming, name calling or the such.
No question is too noobish, But please look for your answer first.
Now for the info needed to help. In your post make sure to included the version of the rom you are using, modem, kernel, ext...
Also please give it some time for your question to be answered.
Pheonix FAQ
Hi. I'm currently on Phoenix 4.5. If i would like to flash to Phoenix 5.2 or Supernova 2.3, would I need to odin it first or can I just flash it over my current ROM?
Also will I need to clear cache, factory reset, etc before flashing?
Thank you.
oblivianz said:
Hi. I'm currently on Phoenix 4.5. If i would like to flash to Phoenix 5.2 or Supernova 2.3, would I need to odin it first or can I just flash it over my current ROM?
Also will I need to clear cache, factory reset, etc before flashing?
Thank you.
Click to expand...
Click to collapse
Really, it's up to you. Some people like to go back to stock. Some don't. I NEVER odin back unless I want to get rid of voodoo quickly. Here is my procedure; boot into CWM recovery, factory reset, clear dalvik cache, install rom. I have never had any problems with this method.
yay! a dedicated Q&A!
maybe here ill get a better answer regarding this:
thanks for answering, although it may be true, i have a feeling that it isnt exactly correct for some of the questions i asked. can any one else comment/confirm?
All captivates are not created equally. Meaning you could have two side by side and flash both with the same rom and have one perform better with it than the other. So its all about finding what works best for you
Originally Posted by Trusselo
damn it i just flashed the darkfire blue theme last night!
redo....
i feel dumb asking but ive been wondering for a while, and havent found a clear answer,
can someone explain what the advantage of having a jpy and a js5 version is?
whats the difference? different base rom ya, but whats different? and why do some people prefer one over the other even when they are torn appart and customized anyway? is it a regional thing?
Click to expand...
Click to collapse
new phoenix 5.2
2 questions:
1. What's the difference between the regular download and js5 base?
2. How is the overall speed and stability?
Thanks!
oblivianz said:
Hi. I'm currently on Phoenix 4.5. If i would like to flash to Phoenix 5.2 or Supernova 2.3, would I need to odin it first or can I just flash it over my current ROM?
Also will I need to clear cache, factory reset, etc before flashing?
Thank you.
Click to expand...
Click to collapse
majinzen said:
Really, it's up to you. Some people like to go back to stock. Some don't. I NEVER odin back unless I want to get rid of voodoo quickly. Here is my procedure; boot into CWM recovery, factory reset, clear dalvik cache, install rom. I have never had any problems with this method.
Click to expand...
Click to collapse
As for me, I disable lag-fix, always Odin back to JF6, Master Clear, then install my new ROM. In the end it's up to you. I've rarely had any issues while doing my flashes this way. majinzen may rarely have any issues doing it his way.
I can only tell you what works for me.
FC from Test-to-speech settings
I'm getting an FC when clicking "Text-to-speech settings" in the "Voice input and output" settings. Anyone else confirm this?
I'm using 5.2 JS5. I did flash to stock and MC before installing (twice).
EDIT: 5.2 JPY does not have this problem.
drothenberger said:
I'm getting an FC when clicking "Text-to-speech settings" in the "Voice input and output" settings. Anyone else confirm this?
I'm using 5.2 JS5. I did flash to stock and MC before installing (twice).
EDIT: 5.2 JPY does not have this problem.
Click to expand...
Click to collapse
if you want that feature you will need to grab the tts.apk from another ROM and put it in system/app.
h0ckey10 said:
2 questions:
1. What's the difference between the regular download and js5 base?
2. How is the overall speed and stability?
Thanks!
Click to expand...
Click to collapse
Regular link is JPY and JS5 link is well, JS5.
Speed on regular is awesome and speed on JS5 is even better. Battery is not an issue on either for me and many others. Keep in mind your results may vary depending on use, modem and kernel should you choose to change it.
adamholden85 said:
drothenberger said:
I'm getting an FC when clicking "Text-to-speech settings" in the "Voice input and output" settings. Anyone else confirm this?
Click to expand...
Click to collapse
if you want that feature you will need to grab the tts.apk from another ROM and put it in system/app.
Click to expand...
Click to collapse
Thanks, Adam! I grabbed PicoTts.apk from Darky's v9.3B1 and that solved my problem.
no Bootani anymore
ok so im a bit of a novice flash whore but ive not seen this , i downloaded Pr 5.2JS5, then upgraded the new "c' kernal, all doing well except i cant get the tts.apk to install (stole it from FF 2.2), (ohwell) but i changed my bootani to the new "ashes" via renaming and putting in system/media (overwrite).. now i have nothing....its pauses with a black screen for the alotted time as is there would be one, then it loads the home screen. i tried to revert to the original one by downloading it from -hq , but same result ... did i screw up?
EDIT: This Q&A is a nice touch , i read the hell outa the dev forums, but still have some basic questions now and again .. Thanks!!
Edit: so i pulled the original Bootani from the system/media from a copy on my pc and reapplied it and it works , there may be an issue with the compatability of the "add ons" boot animations at phoenix-hq and the current version "5.2' at the moment , so i guess patience is in order....still having force closes after applying the ttsservice.apk to the rom from other roms..... force closes.
edit: so i hope this helps someone else cause its makin me look like an idiot....the file need for the "Voice input/output" in the settings to stop FC's is "PicoTts.apk", i stole it from the "PR 5.2 JSY" and placed it in the "PR 5.2 JS4"...works fine now! .. but i hear that "adam" isnt going to be supporting the JS4 build any longer....sheesh. lol
I love 4.5 but I have one problem, bluetooth does not want to pair with my Ford sync system, any suggestions or changes I can make? I have tried every thing I can think of but it will not find my phone.
[Q] Phone Call Recorder
I am getting ready to flash Phoenix 5.2. Really like Adam's Roms. however I keep seeing more roms with the call recording in the phone dialer. Does anyone know of a way to transport that feature into Phoenix?
Is it just a matter of grabbing the phone.apk?
Is it even worth it?
Any input is appreciated on the matter. I want to try it but not enough to pull me away from Phoenix, Firefly, or Supernova.
A real noob
I am new to the droid phone, and i have flashed my phone to froyo 2.2. I really like to go to the phoenix rom but have a few questions.
1. I am a very visual person and was wondering if there are any videos on how to install phoenix to captivate phone.
2. I looked at the options for phoenix and still did not see if phoenix supports playing call through car speakers, which is why i'm changing roms in the first place.
3 Which phoenix version would be best suitable for a noob.
Hey,I'm using Phoenix since 2.5 now i'm on 5.2 and it's the best rom I've flashed.The problem is I'm backup everything using Titanium Backup since 3.5 (all apps+system data).Before crossing from 4.5 to 5.2 I've backup everything and then restore all of them.Will this mess up my rom ? I didn't found any problems yet.
Sorry for my bad English
ck9035 said:
Hey,I'm using Phoenix since 2.5 now i'm on 5.2 and it's the best rom I've flashed.The problem is I'm backup everything using Titanium Backup since 3.5 (all apps+system data).Before crossing from 4.5 to 5.2 I've backup everything and then restore all of them.Will this mess up my rom ? I didn't found any problems yet.
Sorry for my bad English
Click to expand...
Click to collapse
General rule of thumb is to back up your user apps and data, but do NOT restore your system settings(data).
Wraith04 said:
I love 4.5 but I have one problem, bluetooth does not want to pair with my Ford sync system, any suggestions or changes I can make? I have tried every thing I can think of but it will not find my phone.
Click to expand...
Click to collapse
Are you able to pair the phone with other bluetooth devices? I'm not familiar with Ford sync or the process for pairing with one... could you describe briefly the normal steps you take to pair to it?
dstewart4520 said:
I am new to the droid phone, and i have flashed my phone to froyo 2.2. I really like to go to the phoenix rom but have a few questions.
1. I am a very visual person and was wondering if there are any videos on how to install phoenix to captivate phone.
2. I looked at the options for phoenix and still did not see if phoenix supports playing call through car speakers, which is why i'm changing roms in the first place.
3 Which phoenix version would be best suitable for a noob.
Click to expand...
Click to collapse
Just to be clear... you've already flashed your Captivate to a 2.2 ROM? If so, which one are you on currently?
1. I don't know of any videos specific to flashing phoenix, however there are videos available on the forums that demonstrate the flashing process (which you've apparently already done once). The process is fairly straight forward even when just following written instructions.
2. Are you talking about playing your call via a built in phone system (such as the previously mentioned sync?)
3. All the Phoenix ROMs have been solid, so I would always recommend going with the latest.
circuitjerker said:
ok so im a bit of a novice flash whore but ive not seen this , i downloaded Pr 5.2JS5, then upgraded the new "c' kernal, all doing well except i cant get the tts.apk to install (stole it from FF 2.2), (ohwell) but i changed my bootani to the new "ashes" via renaming and putting in system/media (overwrite).. now i have nothing....its pauses with a black screen for the alotted time as is there would be one, then it loads the home screen. i tried to revert to the original one by downloading it from -hq , but same result ... did i screw up?
EDIT: This Q&A is a nice touch , i read the hell outa the dev forums, but still have some basic questions now and again .. Thanks!!
Edit: so i pulled the original Bootani from the system/media from a copy on my pc and reapplied it and it works , there may be an issue with the compatability of the "add ons" boot animations at phoenix-hq and the current version "5.2' at the moment , so i guess patience is in order....still having force closes after applying the ttsservice.apk to the rom from other roms..... force closes.
edit: so i hope this helps someone else cause its makin me look like an idiot....the file need for the "Voice input/output" in the settings to stop FC's is "PicoTts.apk", i stole it from the "PR 5.2 JSY" and placed it in the "PR 5.2 JS4"...works fine now! .. but i hear that "adam" isnt going to be supporting the JS4 build any longer....sheesh. lol
Click to expand...
Click to collapse
I haven't totally ruled it out as there are small differences. Who knows, I am working on my new ROM Orange Chicken, ATM.
JoeDV said:
Just to be clear... you've already flashed your Captivate to a 2.2 ROM? If so, which one are you on currently?
1. I don't know of any videos specific to flashing phoenix, however there are videos available on the forums that demonstrate the flashing process (which you've apparently already done once). The process is fairly straight forward even when just following written instructions.
2. Are you talking about playing your call via a built in phone system (such as the previously mentioned sync?)
3. All the Phoenix ROMs have been solid, so I would always recommend going with the latest.
Click to expand...
Click to collapse
I'm on Froyo.ucji6 currently.
I'm also having trouble with my droid explorer. Do i really need that to flash or can i use something different. And just to let you know i really do appreciate you taking the time to help a noob out, really. I have researched this but everytime i have tried it, it does not work. I think i have messed up my vcard cause i'm getting an error when trying to import contacts to my phone so i'm just trying to find the easiest way to do this. So thanks now, thanks later for your help.
Hey Guys I put together a Q&A thread for this rom to prevent tons of new threads about rom Spicific questions from new users.. Please feel free to post any questions here.
As Aslways there is no Flaming, name calling or the such.
No question is too noobish, But please look for your answer first.
Now for the info needed to help. In your post make sure to included the version of the rom you are using, modem, kernel, ext...
Also please give it some time for your question to be answered.
Great idea Zel, I am here to help.
I will try to answer the questions the best I can and then have a list of FAQ in this post so people can easily access them.
FAQ
How to flash FireFly? (Method one)
BACK UP!!!
Flash to stock (FTS)
Wait for your phone to reboot and then re-enable debugging
Hook phone back up to pc and Master Clear (MC) using Odin
Load Clockwork update.zip (DOWNLOAD)
Load FireFly_X-X.zip to phone memory
Remove sim and external SD, and unplug USB
Boot into recovery and reinstall packages (You may have to reinstall packages twice to get to Clockwork recovery)
Once in Clockwork recovery (Green Text), select install zip from SDcard
Next select choose zip from sdcard
Scroll down to FireFly_X-X.zip and select the file
This will run the script and install the ROM to your phone
After this is done, select go back and then select reboot phone
This may take a while, so leave your phone and go grab a snack!
How to flash FireFly? (Method two) - the one I usually do
Load ROM file onto phone
Boot into recovery
Select ROM and flash it
Reboot, wait and enjoy
Wash, rinse, repeat!
xtremekilla09 said:
Great idea Zel, I am here to help.
I will try to answer the questions the best I can and then have a list of FAQ in this post so people can easily access them.
Click to expand...
Click to collapse
I was thinking the same thing for the FAQ.
ok..lemme do the honors....quick ques...am flashing firefly 2.2(downloading it now)....i flashed back to stock JF6...do i need to flash to some base ROM for firefly 2.2 to work??
I'm asking cause i was on darky8.1, then flashed directly to 9.3b1 which resulted in incorrect orientation(i9000), then i read the instructions which expected me to flash to base(resurrection), then flash a captivate fix and then flash to 9.3b1...!!!!
You should be able to flash directly as long as you flash FF 2.2 full not the update package.
neo_31591 said:
ok..lemme do the honors....quick ques...am flashing firefly 2.2(downloading it now)....i flashed back to stock JF6...do i need to flash to some base ROM for firefly 2.2 to work??
I'm asking cause i was on darky8.1, then flashed directly to 9.3b1 which resulted in incorrect orientation(i9000), then i read the instructions which expected me to flash to base(resurrection), then flash a captivate fix and then flash to 9.3b1...!!!!
Click to expand...
Click to collapse
neo_31591 said:
ok..lemme do the honors....quick ques...am flashing firefly 2.2(downloading it now)....i flashed back to stock JF6...do i need to flash to some base ROM for firefly 2.2 to work??
I'm asking cause i was on darky8.1, then flashed directly to 9.3b1 which resulted in incorrect orientation(i9000), then i read the instructions which expected me to flash to base(resurrection), then flash a captivate fix and then flash to 9.3b1...!!!!
Click to expand...
Click to collapse
Nope, you can download the FF 2.2 from the site. LINK
Pick any one of the mirrors. This will get you FF2.2 with the clock in the status bar.
If you want to remove the clock, you can flash the no clock package.
EDIT: Spaz beat me to it. Thx Spaz.
ok cool..thanks!! lookin forward to enjoy this ROM
..its really irritatin to have to flash to base ROM's and then flash to the updated ROM's....
@xtremekilla09
thanks!! downloading NOW!
zelendel said:
Hey Guys I put together a Q&A thread for this rom to prevent tons of new threads about rom Spicific questions from new users.. Please feel free to post any questions here.
As Aslways there is no Flaming, name calling or the such.
No question is too noobish, But please look for your answer first.
Now for the info needed to help. In your post make sure to included the version of the rom you are using, modem, kernel, ext...
Also please give it some time for your question to be answered.
Click to expand...
Click to collapse
I flash to FireFly 2.2 and its looks awesome + I've been looking for a ROM that had the fix for when I connect the AUX cable to the car radio I can talk to anyone on the phone and hear them on the car speakers... This ROM has that fix finally, I love it... no more Blutooth head sets. But I have a big issue and is that when I make my 3rd or 4th reboot my phone freeze on the "F" boot logo. It does that vibrating action once and then twice like when there's an error. I have flashed my phone before so many times and had no issues and I have been using all FireFly ROM's ever since It came to life. This 2.2 ROM I have flashed like 4 times and I keep having the same problem and I don't want to flash any other ROM only but this one. What can be the reason for this problem? Please Help!
neo_31591 said:
ok..lemme do the honors....quick ques...am flashing firefly 2.2(downloading it now)....i flashed back to stock JF6...do i need to flash to some base ROM for firefly 2.2 to work??
I'm asking cause i was on darky8.1, then flashed directly to 9.3b1 which resulted in incorrect orientation(i9000), then i read the instructions which expected me to flash to base(resurrection), then flash a captivate fix and then flash to 9.3b1...!!!!
Click to expand...
Click to collapse
I you are on stock already just flash FF and you will be good to go!
[email protected] said:
I flash to FireFly 2.2 and its looks awesome + I've been looking for a ROM that had the fix for when I connect the AUX cable to the car radio I can talk to anyone on the phone and hear them on the car speakers... This ROM has that fix finally, I love it... no more Blutooth head sets. But I have a big issue and is that when I make my 3rd or 4th reboot my phone freeze on the "F" boot logo. It does that vibrating action once and then twice like when there's an error. I have flashed my phone before so many times and had no issues and I have been using all FireFly ROM's ever since It came to life. This 2.2 ROM I have flashed like 4 times and I keep having the same problem and I don't want to flash any other ROM only but this one. What can be the reason for this problem? Please Help!
Click to expand...
Click to collapse
That is quite a strange problem.
Lets try to troubleshoot it.
Did you install any third party app that needs to load at startup?
Did apply any themes?
Glad to have this open since i cant post on the original thread yet
Sent from my Captivate running FIREFLY 2.2
Q: is hsupa enabled on this rom? also i'm in australia using 850/2100 wcdma could there be any issues with this modem?
thanks, i'm super excited about ff..... it will be my first flash.
haven't even recieved my phone yet but i'm already obsessed!
A: ok, JK4 hsupa positive. oops forgot about the modem thread. still any word on 2100 would help.
thanks
xtremekilla09 said:
Did you install any third party app that needs to load at startup?
Did apply any themes?
Click to expand...
Click to collapse
Not sure! but the only one I can think of would be "Launcher Pro", but I have always used it, and this problem has never happened. When you install it, you need to reboot again in order for Launcher to take effect. I do need to point out that before this flash I when to stock with Odin. I never have the need to do this cause I use too flash directly from "Rom Manager" but lately I was noticing that when I flash using ROM Manager It wasn't taking me to the green menu, it was taking me to what I think it was the stock menu with blue, yellow and a red letters where red was an error message,so that's why I decided to go to stock and then I did all the steps needed in order to flash a New ROM using the thread from the development section then I flash FF 2.2 and ever since when I boot like for the third or fourth time it freezes. I hope for a solution... I'm only digging FireFly right now cause lets face it...
Thanks a lot for your attention...
Several Questions
I've been using Firefly since it came out and upgraded to 2.2 last week. I do have a couple questions after having used 2.2 for awhile.
1. Why were the dark apps removed (gmail & market)? It seems like Firefly has a darker theme and using the modified apps as default makes sense. Maybe a CWM zip containing all the dark apps would be an option or links to the forum pages? I was able to find dark versions of Gmail, Voice, Gtalk, and the Market by searching, but I think it would make more sense from a theming sense for these to be included by default.
2. What's the best way to remove the Samsung Apps? I flashed the zip and messed around with it a bit, but realized I don't need it. You can't uninstall it like normal apps so I was thinking about removing it with TiBu, but I don't want to mess something up. Suggestions?
3. I searched around the forums, but I haven't been able to find a simple answer to this: does this rom support call recording? Is this a kernel issue or simply a rom feature that Firefly hasn't implemented? If this is something simple to do without losing theming, I have no problem with that, if not consider this a feature request.
4. Not sure if this is a Firefly issue or an ESPN issue, but since flashing 2.2 my ScoreCenter app keeps reverting to the user Tron98001. I don't know who this is or how it got on my phone, but it keeps changing all my settings. Everytime I delete the app and wipe the data, it defaults to that same user when I install it again. If I change the user and settings, within about a day it reverts back. Again, I'm thinking this is an ESPN issue, but I was just wondering if anybody was having the same issue since I didn't have a problem until upgrading to 2.2.
You can always try different modems, to see which one works best for you.
fractaline said:
Q: is hsupa enabled on this rom? also i'm in australia using 850/2100 wcdma could there be any issues with this modem?
thanks, i'm super excited about ff..... it will be my first flash.
haven't even recieved my phone yet but i'm already obsessed!
A: ok, JK4 hsupa positive. oops forgot about the modem thread. still any word on 2100 would help.
thanks
Click to expand...
Click to collapse
Hmmm, lets see if other members can shed some light on this as well.
[email protected] said:
Not sure! but the only one I can think of would be "Launcher Pro", but I have always used it, and this problem has never happened. When you install it, you need to reboot again in order for Launcher to take effect. I do need to point out that before this flash I when to stock with Odin. I never have the need to do this cause I use too flash directly from "Rom Manager" but lately I was noticing that when I flash using ROM Manager It wasn't taking me to the green menu, it was taking me to what I think it was the stock menu with blue, yellow and a red letters where red was an error message,so that's why I decided to go to stock and then I did all the steps needed in order to flash a New ROM using the thread from the development section then I flash FF 2.2 and ever since when I boot like for the third or fourth time it freezes. I hope for a solution... I'm only digging FireFly right now cause lets face it...
Thanks a lot for your attention...
Click to expand...
Click to collapse
Devo7v said:
I've been using Firefly since it came out and upgraded to 2.2 last week. I do have a couple questions after having used 2.2 for awhile.
1. Why were the dark apps removed (gmail & market)? It seems like Firefly has a darker theme and using the modified apps as default makes sense. Maybe a CWM zip containing all the dark apps would be an option or links to the forum pages? I was able to find dark versions of Gmail, Voice, Gtalk, and the Market by searching, but I think it would make more sense from a theming sense for these to be included by default.
2. What's the best way to remove the Samsung Apps? I flashed the zip and messed around with it a bit, but realized I don't need it. You can't uninstall it like normal apps so I was thinking about removing it with TiBu, but I don't want to mess something up. Suggestions?
3. I searched around the forums, but I haven't been able to find a simple answer to this: does this rom support call recording? Is this a kernel issue or simply a rom feature that Firefly hasn't implemented? If this is something simple to do without losing theming, I have no problem with that, if not consider this a feature request.
4. Not sure if this is a Firefly issue or an ESPN issue, but since flashing 2.2 my ScoreCenter app keeps reverting to the user Tron98001. I don't know who this is or how it got on my phone, but it keeps changing all my settings. Everytime I delete the app and wipe the data, it defaults to that same user when I install it again. If I change the user and settings, within about a day it reverts back. Again, I'm thinking this is an ESPN issue, but I was just wondering if anybody was having the same issue since I didn't have a problem until upgrading to 2.2.
Click to expand...
Click to collapse
1. There were too many bugs involved with the dark apps. I decided that it is best to include stock and let users decide based on their preference.
2. I will have to create a CWM zip that takes care of this. It is not as simple as uninstalling.
3. This ROM does not have call recording. It is considered illegal in many states, to record calls without consent of the other part. I just want to stay away from the mess. Users can install that option on their own.
4. That definitely looks like an app issue.
I believe my ROM is more toward the neutral side and I dont wont to force themed apps (that are buggy) or features that can get them in trouble.
I am just being honest.
Let me know if there are more questions.
As FF is rogers based, can it support usb audio out through the car dock? I downloaded the rogers car dock app and no joy. Changed the kernel to FB2, which should have the fix, and still no joy.
Thanks for the amazing rom though!
Sent from my SGH-I897 using XDA App
[email protected] said:
Not sure! but the only one I can think of would be "Launcher Pro", but I have always used it, and this problem has never happened. When you install it, you need to reboot again in order for Launcher to take effect. I do need to point out that before this flash I when to stock with Odin. I never have the need to do this cause I use too flash directly from "Rom Manager" but lately I was noticing that when I flash using ROM Manager It wasn't taking me to the green menu, it was taking me to what I think it was the stock menu with blue, yellow and a red letters where red was an error message,so that's why I decided to go to stock and then I did all the steps needed in order to flash a New ROM using the thread from the development section then I flash FF 2.2 and ever since when I boot like for the third or fourth time it freezes. I hope for a solution... I'm only digging FireFly right now cause lets face it...
Thanks a lot for your attention...
Click to expand...
Click to collapse
I did run into this problem when I flashed Fire Fly 2.2. The only way around it was to uninstall Launcher Pro and then install it again. I am not sure what caused the problem but this did solve it for me. The one downside of this is that all the screen setups that I had got removed. But that is minor to me since I move things around all the time any way.
wpp105 said:
As FF is rogers based, can it support usb audio out through the car dock? I downloaded the rogers car dock app and no joy. Changed the kernel to FB2, which should have the fix, and still no joy.
Thanks for the amazing rom though!
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
That fix is still in the works in Xcal's kernel. We will have to wait till it is implemented all around.
Thanks for your quick response. I'll wait for the CWM zip to remove the Samsung Apps. I understand the legallity of call recording and it is something I just wanted to try out, anyways I have a follow up question then: if I apply the phone.apk and libs I found (http://forum.xda-developers.com/showthread.php?t=938860) would I lose the theming of the dialer that comes with Firefly by default? Do you know of any reason why this wouldn't work?
xtremekilla09 said:
1. There were too many bugs involved with the dark apps. I decided that it is best to include stock and let users decide based on their preference.
2. I will have to create a CWM zip that takes care of this. It is not as simple as uninstalling.
3. This ROM does not have call recording. It is considered illegal in many states, to record calls without consent of the other part. I just want to stay away from the mess. Users can install that option on their own.
4. That definitely looks like an app issue.
I believe my ROM is more toward the neutral side and I dont wont to force themed apps (that are buggy) or features that can get them in trouble.
I am just being honest.
Let me know if there are more questions.
Click to expand...
Click to collapse