[Q] can someone help me to install gingerbread? - XPERIA X1 Q&A, Help & Troubleshooting

I've downloaded gingerbread,but I really don't get it.I want android on xperia x1 more than everything.so is there anyone who can give me a hand?please?

Why don't you look in the Android forum?

xperiauser132 said:
I've downloaded gingerbread,but I really don't get it.I want android on xperia x1 more than everything.so is there anyone who can give me a hand?please?
Click to expand...
Click to collapse
head over to http://forum.xda-developers.com/showthread.php?t=895054
im sure you wil find your answer

just open npkinstall folder than run INSTAL (it will instal the android to ext2) after x1 reboot than run haret in micro sd card..

help
You must first create a partition ext2 and then go to npkinstall folder than run install after restart click on haret (in root micro sd card )
and enjoy Android....

well thats the problem...i dont get videos that show how to make ext2 partition on sd card...

xperiauser132 said:
well thats the problem...i dont get videos that show how to make ext2 partition on sd card...
Click to expand...
Click to collapse
this how to make the ext2.. just look on the kursor...

ahmadin said:
this how to make the ext2.. just look on the kursor...
Click to expand...
Click to collapse
next.......

thanks man,youre a legend!

Related

SD Card wont partition

Hey guys i really need help my im trying to partition my sd card and it says its doing it and like 2 seconds later it says its done and im trying to transferr file to the sd card using the usb toggle on recovery mode and it wont allow me too so can smone plz help me and its not the sd card because i can put files on it using another phone
Crazydrumerkid13 said:
Hey guys i really need help my im trying to partition my sd card and it says its doing it and like 2 seconds later it says its done and im trying to transferr file to the sd card using the usb toggle on recovery mode and it wont allow me too so can smone plz help me and its not the sd card because i can put files on it using another phone
Click to expand...
Click to collapse
So using a different phone the SDcard works? It maybe that the SDcard reader on the G1 is failing. I would try to use Paragon Partition Manager and see if that helps.
nolimit78 said:
So using a different phone the SDcard works? It maybe that the SDcard reader on the G1 is failing. I would try to use Paragon Partition Manager and see if that helps.
Click to expand...
Click to collapse
okkkk thank you ima give this a try then where can i download this at?? if u have da link i would appreciate it alot=)
wait so if i use the partition manager thing is that gonna fix my g1 sd card reader because im trying to load a new rom and it wont let me because sum error comes up sayin i cant put anything on my sdcard idk
Crazydrumerkid13 said:
wait so if i use the partition manager thing is that gonna fix my g1 sd card reader because im trying to load a new rom and it wont let me because sum error comes up sayin i cant put anything on my sdcard idk
Click to expand...
Click to collapse
Nope, it'll only fix the SDcard. The SDcard reader on your G1 won't be affected. If it's broke, it's broke.
http://tinyurl.com/ygwvrol
nolimit78 said:
Nope, it'll only fix the SDcard. The SDcard reader on your G1 won't be affected. If it's broke, it's broke.
http://tinyurl.com/ygwvrol
Click to expand...
Click to collapse
okkk i understand! so if i want to load any roms to my phone i wont be able to or what because my phone is wiped right now doesnt have any rom in it so what can i do to get it running again???
Crazydrumerkid13 said:
okkk i understand! so if i want to load any roms to my phone i wont be able to or what because my phone is wiped right now doesnt have any rom in it so what can i do to get it running again???
Click to expand...
Click to collapse
Not sure, I've heard people using fastboot or ADB but I've never had to do it. I'll look into it (for my own courisity) You should do the same (because it's your problem)
nolimit78 said:
Not sure, I've heard people using fastboot or ADB but I've never had to do it. I'll look into it (for my own courisity) You should do the same (because it's your problem)
Click to expand...
Click to collapse
okkk ima look into it then like if u find a way dat may help me i would appreciate it alot! cuz im really new to have a rooted g1 and i just need help so plz if u can=)

nexsense hd rom help

error!!!!! cant mount sd ext failure line 17 installation aborted...please help...i partion 512mb then 512mb ???
so i partition for nothing so is there a way to clear this partiotion??
try to format your SD card..
fabler said:
try to format your SD card..
Click to expand...
Click to collapse
i did a quick format on my sd card and noting still it still has the partition????
are you using PC to format your SD card? if yes then please don't use PC.. Just use your phone to format SD card..
o okay i will try to format through my phone the sd card...will report back soon..thanks!
okay im trying to format from my phone went into the setting to sd card unmount it clicked on format and nothing haoppens??? omg is it damage now?
Format it on your PC but do a normal format not a quick format. Then try to format it from the phone.
xghostyxjokerx said:
okay im trying to format from my phone went into the setting to sd card unmount it clicked on format and nothing haoppens??? omg is it damage now?
Click to expand...
Click to collapse
No.. it's not damage.. Its formatted.. now see if you can still see that partition..
fabler said:
No.. it's not damage.. Its formatted.. now see if you can still see that partition..
Click to expand...
Click to collapse
okay i think it worked....how can i see if its partition in rrecovery??? and clean the ext partition??
xghostyxjokerx said:
okay i think it worked....how can i see if its partition in rrecovery??? and clean the ext partition??
Click to expand...
Click to collapse
can you tell me what are trying to do? I may help.
fabler said:
can you tell me what are trying to do? I may help.
Click to expand...
Click to collapse
okay thing is i was trying to use the hd rom from evil but for some reason im getting a error unable to mount sd card and line 17 erroir?? even after partitioning.....so i want to get my sd card and all back to normal and use a different rom now i want to clean my sd card and have no partition...see?? so i think i clean it back to original and now i need to see how i can check to see if its not partition....get me?
xghostyxjokerx said:
okay thing is i was trying to use the hd rom from evil but for some reason im getting a error unable to mount sd card and line 17 erroir?? even after partitioning.....so i want to get my sd card and all back to normal and use a different rom now i want to clean my sd card and have no partition...see?? so i think i clean it back to original and now i need to see how i can check to see if its not partition....get me?
Click to expand...
Click to collapse
You can still install HD ROM from evil. How did you partition your SD card?
fabler said:
You can still install HD ROM from evil. How did you partition your SD card?
Click to expand...
Click to collapse
through the recovery amon 1.8.0.1 i went to wipe everything then i partition the sd card and then i place the files back to the card then try to flash and get this whole error...
xghostyxjokerx said:
through the recovery amon 1.8.0.1 i went to wipe everything then i partition the sd card and then i place the files back to the card then try to flash and get this whole error...
Click to expand...
Click to collapse
I think it might not be partitioned properly... coz I've created 512MB ext3 partition and 32 MB of swap partition on my SD card..and everything worked great..
fabler said:
I think it might not be partitioned properly... coz I've created 512MB ext3 partition and 32 MB of swap partition on my SD card..and everything worked great..
Click to expand...
Click to collapse
i dont know thats how i did it and twice.....is there another way?
xghostyxjokerx said:
i dont know thats how i did it and twice.....is there another way?
Click to expand...
Click to collapse
Try another sense + froyo ROM from evil.. It don't required partitioning.. check the following URL.
http://forum.xda-developers.com/showthread.php?t=730290
fabler said:
Try another sense + froyo ROM from evil.. It don't required partitioning.. check the following URL.
http://forum.xda-developers.com/showthread.php?t=730290
Click to expand...
Click to collapse
dangit if there is another way to partition properly please someonone help till then i guess i have no choice but to use the other roms.....thanks though.,..
xghostyxjokerx said:
dangit if there is another way to partition properly please someonone help till then i guess i have no choice but to use the other roms.....thanks though.,..
Click to expand...
Click to collapse
Yes.. you can partition by installing clockworkmod's ROM manager. But I would suggest you to install the ROM from my given link.. Because HD ROM's from evil have many issues.. NO camera and wifi and some other issue.. it is less stable. But the link I've provided is very stable ROM and it is by Evil.. so.. its your choice finally.
fabler said:
Yes.. you can partition by installing clockworkmod's ROM manager. But I would suggest you to install the ROM from my given link.. Because HD ROM's from evil have many issues.. NO camera and wifi and some other issue.. it is less stable. But the link I've provided is very stable ROM and it is by Evil.. so.. its your choice finally.
Click to expand...
Click to collapse
yeh your right...i'll just wait till a more stable version of the hd rom is released.....thanks for your help!
xghostyxjokerx said:
yeh your right...i'll just wait till a more stable version of the hd rom is released.....thanks for your help!
Click to expand...
Click to collapse
Till then you can try evil's non-HD ROM.. It's really great.. and it may solve your sync problem..

[Q] how can I instal program on sd card ?

hi ;
how can I instal program on sd card ?
i use (app2sdcard) but doesnot work !!
it say you ext2 ( connot mount ext2 partition ) !!!!!!
then I try to instal setInstallLocation .. but my device say faild !!!
my device it root it .. but idonot get benefit
please help me ​
Eyaad said:
hi ;
how can I instal program on sd card ?
i use (app2sdcard) but doesnot work !!
it say you ext2 ( connot mount ext2 partition ) !!!!!!
then I try to instal setInstallLocation .. but my device say faild !!!
my device it root it .. but idonot get benefit
please help me ​
Click to expand...
Click to collapse
well i must say that fist you need a ext2 partition in order to install apps on an SD card
the easy way to create an ext2 part is via the new open recovery it an the proses deletes all current data on your SD card so you must back it up (I also recommend a 2.1 custom room with this featured added, i personalty have 2.2 custom room on mine)
whats your main language (cuz it does not seem to be English) can you tell me which was your procedure
You sound like you're still in the beginning, so i got something for ya.
There's an app called iAPK.exe (version 0.2), if you can't find it on google, msg me and i'll pass it to ya.
All you need to do is fire up that app, (of course with phone connected), then simply drag any apk over it.
MenoDev said:
You sound like you're still in the beginning, so i got something for ya.
There's an app called iAPK.exe (version 0.2), if you can't find it on google, msg me and i'll pass it to ya.
All you need to do is fire up that app, (of course with phone connected), then simply drag any apk over it.
Click to expand...
Click to collapse
I downloaded the app & test, but it only install to my main rom, not sd, can you show me how?
Which rom are you on?
may be something wrong with you sdcard...
Try app2card 2.4 it will help u. Back up all ur sd card data before using. The app will format ur sd card to create new ext2 partition
Sent from my Milestone XT720 using XDA App
spiderx_mm said:
Try app2card 2.4 it will help u. Back up all ur sd card data before using. The app will format ur sd card to create new ext2 partition
Sent from my Milestone XT720 using XDA App
Click to expand...
Click to collapse
Does this app require using a custom rom? because I have the stock rom on my milestone 2.1update1 and the device is rooted...
better use app2sd adb method bcoz when u reflash their automatically replace back ur app so no need to backup...base on my exprience...
hello everybody...
i am just new to android...i have milestone..
tried different roms(cm6,got 2.2etc) but still like my custom 2.1 stock rom
(which i have customised with launcher pro,overclock,setcpu profiles,androot,autokiller,dolphin hd ete etc=perfect)
except for the apps 2 sd..
can you help ,me?i tried app2card,it doesnt work..
phone takes very long to boot, and home screen goes blank (i have class 4 sd card)..
how did you do it? please help guys...
any help would be highly appreciated...
cooldudeansari said:
hello everybody...
i am just new to android...i have milestone..
tried different roms(cm6,got 2.2etc) but still like my custom 2.1 stock rom
(which i have customised with launcher pro,overclock,setcpu profiles,androot,autokiller,dolphin hd ete etc=perfect)
except for the apps 2 sd..
can you help ,me?i tried app2card,it doesnt work..
phone takes very long to boot, and home screen goes blank (i have class 4 sd card)..
how did you do it? please help guys...
any help would be highly appreciated...
Click to expand...
Click to collapse
why do you say it doesnt work?
as i said..the phone takes forever to boot...even after it boots...the home screen goes blank,and i am not able to do anything except do a nandroid restore by going back in to recovery...i have a class 4 card 8 gb...can u help?
cooldudeansari said:
as i said..the phone takes forever to boot...even after it boots...the home screen goes blank,and i am not able to do anything except do a nandroid restore by going back in to recovery...i have a class 4 card 8 gb...can u help?
Click to expand...
Click to collapse
will talk in messenger tomorroW!

[Guide] How to successfully create a EXT4 and SWAP Partitions using gparted live CD

Ok, So this is my first guide.. so plz dont mind if my steps are not totally clear
I donno if a similar guide is available or not, bt i had problems finding it so i jus thought i would make my own and make it easier 4 everyone else!!!!
What is needed:
* A computer
* gParted Live CD image
* Blank CD-R
* Software to burn a .iso image
* A card reader
* (I would also recommend an extra computer 4m where u can access this guide), its just in case u 4get any step, coz once u have booted up in gparted, you wont have any net access 4m there
1) Download gparted Live CD (.iso) 4m here:-
http://gparted.sourceforge.net/download.php
(The download will be a bit slow, don't blame me, blame sourceforge) remember to download the stable version
2) Once downloaded Burn it using ur favorite burning software(i use imgburn coz its very simple), dont change any settings, it will burn as bootable by default
3) Restart your computer and enter boot menu(usually by pressing F2/F12) ,in boot menu change the boot order to bring ur cd drive on the top and the exit saving changes
4) Once ur computer restarts, it will boot 4m the CD and u will see some weird lines on ur screen, the u'll come to a page where u have 4 options, select the 1st one(it says boot gparted or something like that)
5) Once started it will ask u 4 preferred language, select ur language by typing the numbers given der and hit enter, after that it will again give u 3 options PRESS 0 AND HIT ENTER
-----U Will get a blurred screen now bt dont worry -------
6) Now u should have booted into gparted, wait 4 a dialog to open, there u would see ur computer's hardisks
7) On the right-hand side top corner u can select to see ur SD card (I donno what to call it bt its like a clickable button which opens a dropdown list of all the storage devices connected to the PC)
8) After selecting the SD card u can see ur SD card in the main screen(along with the partitions, if any) now what i would prefer is a clean format, so delete all the partitions, then u'll be left with just one tab of unallocated space(the total size of your SD card)
9) Right Click on the unallocated and then click new
13) A box will appear to create your first partition. Create your Fat32 partition first. Click the drop down box and click Fat32. Choose the size you want to make it (I just write the size of my EXT4 partition +30MB in the 'Free space following box'---Example:- I want a 512 MB EXT thein ill write 512+30 i.e. 542). leave it as primary. Now click add
14) Now U'll see 2 partitions, one FAT32 and the other one is unallocated, right click on the unallocated one and click new then type 30 in the free space following box, make sure its also on primary partition in the create as box, and then u can select any file system you want (EXT2,3,4). then click add
15) Now only 30 MB will be shown as unallocated. Right click on that and click new, don't change anything, except the file system box, select it as linux SWAP, then click add
16) Now click apply. Congratulations!!!!!!! You are done with the partitioning of your SD card!!!!
17) On the top left of your screen u can see an icon named as exit/turn off, click on it and then select reboot and click ok... ur pc will restart and boot to windows....
---------------------------------------------------------------
This will Give your a successfully working EXT and swap partition, that to of your desired Size!!!!
Hope this proves to be helpful to anyone who requires it.... feel free to post questions if u have any problems understanding these steps
can you please change all those 4s... it is really irritating!
Sent from my HTC Wildfire using XDA App
Profiler08 said:
can you please change all those 4s... it is really irritating!
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Sure mate.... ill do it as and when i get time...
it work! thanks buddy!
I got noob question.
Do this solve the problem of getting low memory space msg on your phone?
adnanasim80 said:
I got noob question.
Do this solve the problem of getting low memory space msg on your phone?
Click to expand...
Click to collapse
You will have to install the Apps2SD Script after this, and move the apps and dalvik cache to the SD card after this guide, to move your apps to SD and remove the low mem space message.
adnanasim80 said:
I got noob question.
Do this solve the problem of getting low memory space msg on your phone?
Click to expand...
Click to collapse
3xeno is right..u need to flash the script... alternatively what u can do is that flash a rom that already has apps2sd in it...
ex:- wildpuzzle,ds,CM6&7...etc..
pyroblazer said:
3xeno is right..u need to flash the script... alternatively what u can do is that flash a rom that already has apps2sd in it...
ex:- wildpuzzle,ds,CM6&7...etc..
Click to expand...
Click to collapse
I have got latest HBOOT. Do you think I could still flash other roms on my HTC wildfire?
I tried few methods but all in vain. Maybe I don`t have vast knowledge of flashing and rooting.
Any suggestion....
HTC Wildfire
UK network UNLocked
Software version 2.2.1
Kernel version 2.6.32.21-g6c55ee4
HBOOT-1.01.0002
MICROP-0622
Touch Panel-atmel224_16ab
Radio 0-3.35.20.10
adnanasim80 said:
I have got latest HBOOT. Do you think I could still flash other roms on my HTC wildfire?
Click to expand...
Click to collapse
Not possible as of now. You will have to wait.
Can this work with unrooted Wildfire 2.2.1?!
Is using this tutorial will allow me to install "ALL" Apps to SD Card and leave phone memory free ??
Already using App 2 SD Pro and Apps 2SD , is this guide useful for me or those two apps are doing the job
Is it the only way to partition SD card?
aq79 said:
Is it the only way to partition SD card?
Click to expand...
Click to collapse
interests me too,
because on my HD2 i use CWM to create this partition or MiniTool Partition Wizard Home Edition 5.2.
Do this methodes work on wildfire?
johnsk said:
interests me too,
because on my HD2 i use CWM to create this partition or MiniTool Partition Wizard Home Edition 5.2.
Do this methodes work on wildfire?
Click to expand...
Click to collapse
CWM Method works. That is what I did on my Wildfire to enable DTApps2SD, and no issues.
EDIT: I meant ROM Manager.
3xeno said:
CWM Method works. That is what I did on my Wildfire to enable DTApps2SD, and no issues.
EDIT: I meant ROM Manager.
Click to expand...
Click to collapse
I also used ROM manager to create swap partition for Wildpuzzel ROM but after didn't know that ROM manager can create Ext-3 or Ext-4 partitions
Thanks for clarification
It's EXT-3 only AFAIK. But, DTApps2SD can convert EXT3 to EXT4 (Or EXT2 to EXT3). You can take a look here:
http://www.facebook.com/note.php?note_id=158826790833326
MohamedYousri said:
Can this work with unrooted Wildfire 2.2.1?!
Is using this tutorial will allow me to install "ALL" Apps to SD Card and leave phone memory free ??
Already using App 2 SD Pro and Apps 2SD , is this guide useful for me or those two apps are doing the job
Click to expand...
Click to collapse
May you answer my question plz , Thanks all
Not applicable to Unrooted phones.
MohamedYousri said:
May you answer my question plz , Thanks all
Click to expand...
Click to collapse
roted phones - when we speak on wildfire before 1.01 upgrade - famous ota upgrade -wildfire gains android 2.2 and everyone who has accepte this upgrade got more restrictive upgrade to hboot
and now they are crying - just reading isnt enougtch - no root is available for their phones - by design.
now to yur question - can i root wildfire ?
just polish your englisch. s-off - till time - vorget it
m32
3xeno said:
Not applicable to Unrooted phones.
Click to expand...
Click to collapse
rooted != s-off and cid != 11111111 - free cid

android not working

I'm having a HTC Touch Diamond dia100 with windows mobile 6.5 bsb ultimate rom and i wanted to know if there's any way to load android on this rom .
Thanks for help!!!!!
chrisg4 said:
I'm having a HTC Touch Diamond dia100 with windows mobile 6.5 bsb ultimate rom and i wanted to know if there's any way to load android on this rom .
Thanks for help!!!!!
Click to expand...
Click to collapse
if you want a dual boot (WM + Android) can work on your device, you must first install Gen.Y_DualBOOT-v1.0.6.0-VGA-Internal
download rom android like FRX07.1 or XDAndroid GBX0C 2.3.7 and extract to a folder then copy to the root of your phone's internal storage
for more details, see the thread [BUILD] ** Complete ** FRX07.1 FroYo Bundle
Hakim Rahman said:
if you want a dual boot (WM + Android) can work on your device, you must first install Gen.Y_DualBOOT-v1.0.6.0-VGA-Internal
download rom android like FRX07.1 or XDAndroid GBX0C 2.3.7 and extract to a folder then copy to the root of your phone's internal storage
for more details, see the thread [BUILD] ** Complete ** FRX07.1 FroYo Bundle
Click to expand...
Click to collapse
I had tried in the past XDAndroid GBX0B 2.3.3 and I got this message : That there wasn't able to calculate tha amount of memory. something like this . how can i fix this .I don't want to have the same problem and with these roms.
Sorry for my bad english !
I tried FRX07.1 it says waiting for sd card and then it say failed to mount the sd card.Csnnot continue. how can i fix this?
chrisg4 said:
I tried FRX07.1 it says waiting for sd card and then it say failed to mount the sd card.Csnnot continue. how can i fix this?
Click to expand...
Click to collapse
looks like you need to reformat the internal storage to fat 32 system, then copy back android file's to internal storage phone (4Gb) and run Haret.exe
Hakim Rahman said:
looks like you need to reformat the internal storage to fat 32 system, then copy back android file's to internal storage phone (4Gb) and run Haret.exe
Click to expand...
Click to collapse
Thanks .Now I'm using GBX0C and I think that it's better than every android i had use on my other diamond,before i give it to my brother
And something else is there any nand android for the diamond?
chrisg4 said:
And something else is there any nand android for the diamond?
Click to expand...
Click to collapse
you can find it at http://tiad8.com/threads/test-nand-recovery-for-diamond-testing-v1-2011-12-09.692/
Hakim Rahman said:
you can find it at http://tiad8.com/threads/test-nand-recovery-for-diamond-testing-v1-2011-12-09.692/
Click to expand...
Click to collapse
Is this working or not I don't want to destroye my only one phone
chrisg4 said:
Is this working or not I don't want to destroye my only one phone
Click to expand...
Click to collapse
Well it worked, but first you must understand all too well from the guidance given
I suggest you should install android on the internal storage to be more safe, if you still get issue with internal storage ! read Diamond Storage Issues (Storage Card Unmounted) at this post http://forum.xda-developers.com/showpost.php?p=6967730&postcount=4
Hakim Rahman said:
Well it worked, but first you must understand all too well from the guidance given
I suggest you should install android on the internal storage to be more safe, if you still get issue with internal storage ! read Diamond Storage Issues (Storage Card Unmounted) at this post http://forum.xda-developers.com/showpost.php?p=6967730&postcount=4
Click to expand...
Click to collapse
I fixed my diamond and I'm using android now,but which android is better FRX07.1 or GBX0C ?
chrisg4 said:
I fixed my diamond and I'm using android now,but which android is better FRX07.1 or GBX0C ?
Click to expand...
Click to collapse
It's up to you, that I personally use GBX0C
Hakim Rahman said:
It's up to you, that I personally use GBX0C
Click to expand...
Click to collapse
Is there any new kernel for GBX0C?
Which is the newest zimage for GBX0C?
I have a HTC Diamond (DIA100), followed step by step this topic: http://forum.xda-developers.com/showthread.php?t=1171052, all seem to be ok, but my device reset himself few minutes after xdandroid logo appears. Thanks
AndresCba said:
I have a HTC Diamond (DIA100), followed step by step this topic: http://forum.xda-developers.com/showthread.php?t=1171052, all seem to be ok, but my device reset himself few minutes after xdandroid logo appears. Thanks
Click to expand...
Click to collapse
Have you changed the startup for the diamond before you boot up the rom?
chrisg4 said:
Have you changed the startup for the diamond before you boot up the rom?
Click to expand...
Click to collapse
yes I did, I've tried everything, but didn't work on my phone. Thanks for the answer
AndresCba said:
yes I did, I've tried everything, but didn't work on my phone. Thanks for the answer
Click to expand...
Click to collapse
Try to reformat your diamond with a tool on fat32 format

Categories

Resources