Related
Hi all,
I thought that I'd share my experience with everyone.
I have had endless problems with today plugins displaying properly. Some wouldn't display at all. System was terribly slow on startup after a soft reset. Some plugins would cause device to hang and required several soft resets. I then purchased SafeMode and that helped a lot.
But, my dear friends, the problem, the actual culprit was......yes, you guessed it....HTC HOME CUSTOMISER!!!!!!!
I decided to run Spb Mobile Shell as my GUI and the today screen would never refresh properly. So I decided to uninstall HHC, as I hadn't actually opened the app in months. I changed today to Alienware almost a year ago and never used it again.
Guess, what.....EVERYTHING works properly now. And I mean EVERYTHING. All plugins install and work fine, Spb runs like a bullet train, Changing from Portrait to landscape by sliding keyboard out is so snappy, I don't even have time to count to 2!!!
The other major culprit was PhoneAlarm. This app chews up so many system resources, it is scary. Ever since I removed these two apps, I have restored my faith in these devices.
So, if anyone is experiencing similar problems, then try uninstalling HHC and if you are running PhoneAlarm, then uninstall that also and see how your device behaves.
I recently ran into an odd problem. I updated my phone from 2.1 to 2.2 Froyo Test 4, then to RC1. I use overclocker app, launcher pro, and advance task killer mainly.
My problem is: When I use my phone, sometimes the screen will not allow me to touch icons, unlock it, ..etc. All it does it move the notification bar up and down like I am touching the top of the screen. If I keep trying to "turn screen off, back on, off, back on"...eventually, I will be able to use the phone for a couple of minutes before it happens again. I tried disabling/reducing overlock settings, uninstalling launcher pro, downgrading 2.2 to 2.1 (ICERoM 2.8). None of this helps.
Any ideas?
Note: Sorry if this was explained elsewhere. I tried searching my best.
Kernal Version: 2.6.29-Godmode-oc-bfs (toast)
Where do you live? I live in florida, and this happens to me when I'm outside for an extended period on a really humid day. Once I take it in to the ac for a few, it's all ok.
Sent from my HTC Hero CDMA using XDA App
Louisiana. Doesn't seem like that would be it though. My wife has the same phone and has never experienced this problem (she has OEM 1.6 version). I am leaning towards software issue.
mar122999 said:
I recently ran into an odd problem. I updated my phone from 2.1 to 2.2 Froyo Test 4, then to RC1. I use overclocker app, launcher pro, and advance task killer mainly.
My problem is: When I use my phone, sometimes the screen will not allow me to touch icons, unlock it, ..etc. All it does it move the notification bar up and down like I am touching the top of the screen. If I keep trying to "turn screen off, back on, off, back on"...eventually, I will be able to use the phone for a couple of minutes before it happens again. I tried disabling/reducing overlock settings, uninstalling launcher pro, downgrading 2.2 to 2.1 (ICERoM 2.8). None of this helps.
Any ideas?
Note: Sorry if this was explained elsewhere. I tried searching my best.
Kernal Version: 2.6.29-Godmode-oc-bfs (toast)
Click to expand...
Click to collapse
You posted this in the wrong forum
Anyway, it could be a hardware problem, but it sounds more like a software issue. Sometimes this happens to me when the phone slows down. Are you low on RAM when this happens?
Nope. Ram is ok. 70+ Mb. Seems like it all started when I upgraded to 2.2. At times, the phone is unusable. Right now, it has been working perfect for a couple of hours. I downgraded to 2.1 thinking that 2.2 was the problem, but 5 hours ago, I encountered the same problem with 2.1. So that can't be it. Screen protector maybe?
mar122999 said:
Nope. Ram is ok. 70+ Mb. Seems like it all started when I upgraded to 2.2. At times, the phone is unusable. Right now, it has been working perfect for a couple of hours. I downgraded to 2.1 thinking that 2.2 was the problem, but 5 hours ago, I encountered the same problem with 2.1. So that can't be it. Screen protector maybe?
Click to expand...
Click to collapse
Yeah, could definitely be the screen protector is changing roms doesn't help. Could also be a bad touchscreen, but most likely screen protector.
derekwilkinson said:
Yeah, could definitely be the screen protector is changing roms doesn't help. Could also be a bad touchscreen, but most likely screen protector.
Click to expand...
Click to collapse
+1
when i had one on my phone it would do this. i think its static tricking the touchscreen.
No matter what I do and however many times I flash cm7, I seem to have erratic touchscreen behavior.
The nook is BRAND NEW (two days) and I flashed it with cm7 7.0.2 stable (after phiremod's 6.0 & 6.1) and flashed it about four times now.
I have tried it with the OC and without.
It's not the SD - it doesn't matter if it's in or not.
Not the wifi, since I didn't even set it up the third and fourth time - it was too erratic to even try.
Plugged in or not... still the same problem. Doesn't seem similar to the other forums topics about touchscreen issues WHILE charging.
Screen is near spotless... no smudges.
It is important to note, that it waits until I have done a few things to start going crazy. I restart it and it's fine, until I do some cpu intensive stuff - live wallpaper is the simplest activity that causes it.
Any ideas?
I have also tried NSR (screen re calibrator) to no avail.
Would love a quick fix rather than re-installing stock and returning it and convincing them to replace it. I am not sure if it does it with stock... didn't wait long enough to find out before flashing it.
have you tried a screen protector? my screen wasnt the best for precise touches but since i put a screen protector on and clean the screen regularly it has since changed my problems to almost non existant.
Sent from my NookColor using Tapatalk
Others may be able to help you more than I can with exactly when the CM7 may be doing this, but returning to stock to find out is actually not hard at all.
In the development thread there is a post that has the 1.2 stock zips (one keeps CW in place, the other returns it completely to stock). Which ever one you pick it's still just as easy to return to stock as to reflash CM7 again. This is especially true if you used a SD card with CW to flash (which is what I do), since when you want to go back to CM7 you won't have to worry about flashing CW to emmc again.
angelic.pariah said:
No matter what I do and however many times I flash cm7, I seem to have erratic touchscreen behavior.
The nook is BRAND NEW (two days) and I flashed it with cm7 7.0.2 stable (after phiremod's 6.0 & 6.1) and flashed it about four times now.
I have tried it with the OC and without.
It's not the SD - it doesn't matter if it's in or not.
Not the wifi, since I didn't even set it up the third and fourth time - it was too erratic to even try.
Plugged in or not... still the same problem. Doesn't seem similar to the other forums topics about touchscreen issues WHILE charging.
Screen is near spotless... no smudges.
It is important to note, that it waits until I have done a few things to start going crazy. I restart it and it's fine, until I do some cpu intensive stuff - live wallpaper is the simplest activity that causes it.
Any ideas?
I have also tried NSR (screen re calibrator) to no avail.
Would love a quick fix rather than re-installing stock and returning it and convincing them to replace it. I am not sure if it does it with stock... didn't wait long enough to find out before flashing it.
Click to expand...
Click to collapse
Hate to say it but it sounds like it might turn out to be a hardware issue. This is not a CM7 issues that I've seen from anybody.
Can you describe the behavior in more detail?
dalingrin said:
Hate to say it but it sounds like it might turn out to be a hardware issue. This is not a CM7 issues that I've seen from anybody.
Can you describe the behavior in more detail?
Click to expand...
Click to collapse
It seems to start selecting things on its own after I have been using it for a while. It's difficult to describe except that there isn't really a pattern... it selects something different and keeps at it. At one point I almost purchased an app from the market before I had to power down.
I will return it to 1.2 stock and report back. I was mainly wanting to know if these was a commonly reported issue or not. I guess it's not. Thanks for the help everyone!
angelic.pariah said:
It seems to start selecting things on its own after I have been using it for a while. It's difficult to describe except that there isn't really a pattern... it selects something different and keeps at it.
Click to expand...
Click to collapse
So my NC started to do the same thing last night. I have been running CM7 (at 7.0.2 now, but nightlies before then with dal's OC kernal) for quite a while now with no problems. Only thing I did last night was to delete about 1GB of ebooks off of my NC and reload them through Calibre.
I left it alone last night after it started doing it and then this morning it started doing crazy touches again. I was in Aldiko and it was selecting books and turning pages at random. Rebooted and it seems to be fine for now. Little odd though considering it has been running perfect for a few months.
bucketheadmn said:
So my NC started to do the same thing last night. I have been running CM7 (at 7.0.2 now, but nightlies before then with dal's OC kernal) for quite a while now with no problems. Only thing I did last night was to delete about 1GB of ebooks off of my NC and reload them through Calibre.
I left it alone last night after it started doing it and then this morning it started doing crazy touches again. I was in Aldiko and it was selecting books and turning pages at random. Rebooted and it seems to be fine for now. Little odd though considering it has been running perfect for a few months.
Click to expand...
Click to collapse
So now I have installed nook stock 1.2 and NO PROBLEMS. I have run everything trying to get something to happen, and nothing.
Is it possible that I installed something the wrong way with cm7? Could I have used the wrong CWM version (3.0.0.6)?
Should I try cm7 7.0.2 or something else again?
I would try and return it, but I can't recreate the problem... if I could, I would be in their face right now.
Thanks for the help so far.
I think I solved it!
The newest nooks (in the last week or so) have 1.1.0 factory stock. Apparently there is a glitch that has been reported a lot recently about handling the touchscreen AND the SD card. These were fixed in the 1.2 upgrade. SO...
1. I flashed factory stock back on (in this case I went back to 1.0.1)
2. Then turned it off and "restored factory" settings using "Power+N" to turn it on. Repeated that a second time to get B&N's factory reset screen to come up.
3. Pressed N twice to accept restore prompts.
4. Upgraded to 1.2 (no glitches already by this point with touch or SD)
5. Booted CWM 3.0.0.6+
6. Formatted /system & /data
7. Flashed phiremod 6.1
8. OC'd to 1.1Ghz
...and DONE. No problems so far. I still see the "Read Forever" opening screen, but it still works wonders. WAY better than before.
I am still having issues with Wifi, but I can deal with that.
Now to attempt dalingrin's OC to 1.3!
Thanks guys... hope this helps others.
I think they call it "Touchscreen goshting". It started happening to me when I rooted the nook and the keyboard would go crazy. Now in CM7 7.0.2 with latest kernel, it happens more frequently. About 5 minutes in from boot, fast random touches occur. Most of the times this gets fixed by pressing the power button to turn the screen off (sleep), and on again. I guess it could be a hardware issue where some devices are affected. I haven't tried any recalibration apps to try to fix it yet, its kind of annoying when it happens in fast intervals.
I had weird touchscreen issues when using the interactive cpu governor. I later found only performance is supported. Using performance setting, everything works much better.
queseyo said:
I think they call it "Touchscreen goshting". It started happening to me when I rooted the nook and the keyboard would go crazy. Now in CM7 7.0.2 with latest kernel, it happens more frequently. About 5 minutes in from boot, fast random touches occur. Most of the times this gets fixed by pressing the power button to turn the screen off (sleep), and on again. I guess it could be a hardware issue where some devices are affected. I haven't tried any recalibration apps to try to fix it yet, its kind of annoying when it happens in fast intervals.
Click to expand...
Click to collapse
I had the same issue. I exchanged it the other night and now my new one does not have the problem. It probably a hardware issue...i hope you are still under warranty!
So I started noticing lag on games with a virtual pad. As in, jump works fine if im standing in game for example, but im running and I try to jump, either it doesnt do it at all, or it does it with some lag.
So I downloaded a multitouch tester and pretty much confirmed that there's an issue there.
If I just touch with one finger at a time, it works fine. If I press with two fingers and keep them there moving them around and whatnot, it also works fine.
BUT, if I keep pressing with one finger and use the other one to do a fast light tap, half of the time it doesnt register it.
Im using the ROM posted here: http://forum.xda-developers.com/showthread.php?t=1583871
wich im finding to be great, but I thought of originally posting my issue there since I gather it is more likely to be caused by software and not hardware.. right? considering simple touch works completely fine.
Any ideas?
Ace supports only 2 fingers at a time. But i did not find any types of lags while using 2 fingers. But it wont work if u use 3 or more fingers at once.
REPLY
Hey I got 100% same issue too. On original cm7 nightly.
But I found out sometimes it works and sometime it doesn't seems to work. I think it's similar to the rounding bug.
Maybe it's the kernel problem. Just don't overclock and it will work well. Or, reboot your phone and wait for a night without touching it, and the problem is gone. However, the bug will occur again after you install an app or launch an app. This multi-touch bug always occur on cm7. If you don't want this problem you can use stock roms. But if you say touch making it lags, it doesn't make our phone lags or the game you play using this phone is a bit slow. Just the second finger is responding slowly if the first finger is pressed/touched on the screen.
And I've tested this bug using the dev tools in the cm7 rom. dev tools/pointer location. All of the stock rom doesn't have this bug except cm7. CM7 will not have this problem on the first few weeks since the first boot. hope it helps
It's a Ace Hardware issue. Nothing to do about it.
King of the mashed potatoes©
Getting a faster device is the only solution
I got transformed into a potato while writing this post..
Hello, I am having some touchscreen problems with CM9 and 10, but not with webOS. Namely, I think that the tablet is detecting double or even triple taps when none are present.
In CM9, when I execute a longpress (to move an app for example), the tablet just kind of... spazzes out, and in general nothing happens. In CM10 it also does this, and almost everytime, it starts whatever app I was pressing on.
Also, when I try to type in the CM10 keyboard, 2-4 characters are being entered at a time, unless I touch incredibly lightly, and even then, I will often get two.
There are other symptoms along these lines, like trying to pull up the notifications, etc. This does not appear to be isolated to any one portion of the screen, it is happening everywhere I could check it.
This CM9 versions I have tried are the nightly 0715, and whatever the latest nightly was about a week ago. The CM10 version I am using is jcsullins' 12/16.
As stated, I have zero issues in webOS.
Is there any way to change the touch sensitivity? Am I a moron and doing something wrong?
Thank you for your help/advice.
To clarify, I think this might be two separate issues...
I'm not as concerned with the CM9 issue, as it is only a mild annoyance and everything else is outstanding. CM10 is virtually unusable, however, so I'm hoping someone can help me out there.
thatdumbguy said:
Hello, I am having some touchscreen problems with CM9 and 10, but not with webOS. Namely, I think that the tablet is detecting double or even triple taps when none are present.
In CM9, when I execute a longpress (to move an app for example), the tablet just kind of... spazzes out, and in general nothing happens. In CM10 it also does this, and almost everytime, it starts whatever app I was pressing on.
Also, when I try to type in the CM10 keyboard, 2-4 characters are being entered at a time, unless I touch incredibly lightly, and even then, I will often get two.
There are other symptoms along these lines, like trying to pull up the notifications, etc. This does not appear to be isolated to any one portion of the screen, it is happening everywhere I could check it.
This CM9 versions I have tried are the nightly 0715, and whatever the latest nightly was about a week ago. The CM10 version I am using is jcsullins' 12/16.
As stated, I have zero issues in webOS.
Is there any way to change the touch sensitivity? Am I a moron and doing something wrong?
Thank you for your help/advice.
Click to expand...
Click to collapse
I've not had this issue, but this might help. Go here : http://goo.im/devs/jcsullins/cmtouchpad/testing
Download the touch pressure utility (should be the last one) and flash it. Hope it helps.
Good luck.
As an update, after shelving the touchpad for a few months, I have revisited it, and, after doing a clean install of jcsullins' CM10.1 w/BT Fix (20130808), the same issues as above still persist. I've done the following, although I didn't really expect most of them to work:
Switching to stylus mode (no difference)
Changing the accessibility settings for touch & hold delay
Even went so far as to install another launcher (nova) to ensure it wasn't trebuchet (not that I think it was)
Same for the keyboard
This has never been an issue I've seen in webOS... additionally, I don't remember ever having any issues in CM7 either. I did play with webOS for some time today to make sure it wasn't some kind of hardware failure between now and the last time I used it frequently, but I failed to reproduce the problem there.
Is there any light someone can shed on the subject? Thanks!
Thanks for that Chicle_11... I don't know why I failed to mention it, but I did also try the patches with CM9, but it is to my understanding that they were rolled into cm9 nightlies at some point?
I wonder if I could be having a minor hardware issue that just isn't severe enough to display in webOS, because I can't seem to find anything else about this, especially the keyboard problem with CM10. Its bizaar for sure.
Started experiencing the same issues after upgrading from cm9
I recently upgraded from cm9 to cm10.2 and immediately noticed this issue. There were no such issues with cm9. When swyping on the keyboard (any - Google, Swype, etc.), the system registers that I lifted my finger, and so garbage gets typed - you can also see the effect in the trace. When typing instead, letters sometimes double-up for a single press. When playing games like PvZ2, dragging a plant results in a release of the plant before I've lifted my finger, and sometimes the plant gets planted across the screen from where my finger is pressing.