Related
I wrote a small script with a wget command:
wget https://xxxxxxxlain.html?url=&meth=plain&action=login&time=480&uid=xxx&pswd=xxxx&submit=1
the script is called sesame
Put in on root of sd
terminal emulator:
Code:
$ su
# chmod 777 sesame
# ./sesame
: permission denied
How can that be?
Because the G1 uses ash, not bash, as its shell/CLI.
Rather than "./", use "sh ./"
IConrad01 said:
Because the G1 uses ash, not bash, as its shell/CLI.
Rather than "./", use "sh ./"
Click to expand...
Click to collapse
also, unless you had previously cd'ed to sdcard you must add the path so
Code:
sh /sdcard/sesame
should work
That's implicit when you understand the "." to mean "current directory".
I.e.; "find . -print" will print out every file in your current directory in a list. Going a step fancier you could also use "find . | grep .apk" to find all .apk's in your active directory.
Fun with commands!
Sogarth's webtop2sd will be released soon, you really should wait and install that instead of this! Thanks -The Management
No longer breaks on 1.83, thanks to Romracer
Update: This script worked on my phone. Mind you I was installing it from a fresh SBF flash, but it should work on your phone too. Absolutely no guarantees as usual.
Update 11th April 2011, 06:59 PM: Won't be getting CWM package because it'd be huuuuuuuuuge.
Update 28th April 2011. 16:38 PM: Removing BETA tag since there have been no issues with the script for quite some time.
First off I would like to thank Sogarth for making this script in the first place as well as Romracer for fixing it for 1.83. Since he is busy doing more important work I decided to do this little hack for those of us that updated to 1.5.7 and dont feel like flashing back to earlier versions to get full Ubuntu working.
Again, this is only necessary if you're already running 1.5.7 or 1.8.3.
Secondly, I am still working on this script so it may not work for you. If you have a problem you may post in the thread or PM me showing exactly the error message, word for word, that you receive.
Updates will be included in the OP from time to time as I fix errors.
Instructions:
1) install.bat (from your computer)
2) adb shell (get a shell on your phone)
3) su (get root on your phone in that shell)
4) . /data/local/tmp/install.sh (run the install script *on your phone* don't forget the "." and the space after the dot, or you will have to chmod 755 the shell script manually)
5) ?????
6) profit\
Noob instructions, written by Viamonte (I take no credit or responsibility):
Thanks again for all your help. Now the noob instructions:
"1-Download "Terminal Emulator" from the market, on your phone (or any other terminal), and the file anexed in this thread to your computer.
2-Connect the Atrix to the computer via USB, configuring the connection mode to "None" and enabling USB Debugging mode (Settings>Applications>Development>USB debugging)
3-Unzip the file you downloaded on your pc, and run Install.bat. This will push the script to your phone.
4-Go back to your phone and open the emulator you downloaded. Then type "su" (without quotes) and press enter. Then type ". /data/local/tmp/install.sh" (without quotes) and press enter again.
The script should begin running now. It will stop in two moments where you'll be instructed to get a cup of coffee, and may take several minutes to continue form this point. When finished, the Atrix will reboot.
To check if this worked, use the Webtop either on your multimidia dock or your lapdock and verify if new itens appeared on your task bar and on the right upper side of the screen"
0.3.1 release
0.2 release
0.1 first release
Changelog
0.3.1 fix to gconf file's mdate so it does what its supposed to do =)
0.3 Small typo fixes and cpp package install fix by romracer, now works on 1.83 =)
0.2 Fixed some typos in uninstall.sh and make sure the %gconf file wound up in the right spot.
0.1 - first version. NOT CWM install but ready to be packaged for that more or less
Nice, I'll give this a shot later.
Ill give it a shot when I get home!
Sent from Motorola Atrix on TELUS.
My phone is working perfectly, so why not ruin it?
I'm giving this a try right now!
1.4.57 - Rooted and gingerblurred with HDMI Mirroring and Webtop hack.
I'll update as progress goes along:
Edit 1:
Initial try gave me this
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] y
Mounting the filesystem...
07.sh
--------------------------------------------
EXECUTION FAILED
Unable to mount the filesystem file. ERR 07
--------------------------------------------
Press any key to continue . . .
Edit 2:
Ok, it doesnt work with resetting it. How about removing?
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] y
Deleting the filesystem file...
--------------------------------------
EXECUTION FAILED
Unable to delete the filesystem file.
--------------------------------------
Press any key to continue . . .
Edit 3:
Ok, only one option left then.
Checking device state...
Obtaining temporary root access...pushing shell scripts
A filesystem file already exists. Reset it? [n] n
A filesystem file already exists. Delete it? [n] n
--------------------------------------------------------------------------
EXECUTION FAILED
The filesystem file already exists, but no operations have been selected.
--------------------------------------------------------------------------
Press any key to continue . . .
=====================================================================
Edit 4:
Since execution is failing I'm trying to find the problem. Using ADB Shell i tried to manually run the shell scripts and stumbled here:
(I tried chmod 777 @ 02.sh to see if that was the problem, no change is results)
# ls -l
...
...
-rwsr-sr-x shell shell 87 2011-04-06 12:13 03.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
-rwsr-sr-x shell shell 251 2011-04-06 12:04 01.sh
# pwd
pwd
/data/tmp/shell
# /data/tmp/shell/02.sh
/data/tmp/shell/02.sh
/data/tmp/shell/02.sh: not found
I had the same issue as flybob when I tried to run the script.
Sent from my MB860 using XDA Premium App
Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.
Ah, I did not think about that Ririal, thanks for the info. I am not familiar with CWM though.
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.
Ririal said:
Good effort, but 1.57 changes how we have to run commands as root. On a normal linux box, I'm sure your methods would work fine, but we're not dealing with a normal su binary. You should look into doing this as CWM as opposed to .bat files. I had a hell of a time getting around the restrictions since the psneuter exploit was closed.
Click to expand...
Click to collapse
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !
molotof said:
How about a shell script that we can run in terminal emulator ? and the output goes to screen and a log file for debug !
Click to expand...
Click to collapse
most of the script is now run by shell scripts, no reason you couldn't run them in the terminal emulator, just get the order right. There are also a few lines I didn't translate to shell so you'd have to enter them by hand.
In any case I'll keep working on this until Sogarth releases his version with union mounts =D
You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked
flybob said:
You might be interested to know this;
# cd /tmp
cd /tmp
# pwd
pwd
/data/tmp
# ls -l /tmp
lrwxrwxrwx root root 2011-04-09 14:47 tmp -> /data/tmp
I'll happily help with the script, i know tons of linux and got my Atrix ready to be bricked
Click to expand...
Click to collapse
That's just a symlinked directory. I won't make a difference if you call either.
Yes, just replied to the previous question
Why is the /tmp directory in /data ? That would certainly cause every script to fail.
I'll look at this some more tonight.
Click to expand...
Click to collapse
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found
flybob said:
Yes, just replied to the previous question
However, why doesn't the scripts run as wanted...?
# cat /tmp/shell/02.sh
cat /tmp/shell/02.sh
#!/bin/sh
/system/bin/su
/bin/rm /data/ubuntu.disk > /dev/null 2>&1 && echo PASS#
# ls -l /tmp/shell/02.sh
ls -l /tmp/shell/02.sh
-rwxrwxrwx shell shell 82 2011-04-06 12:11 02.sh
# /tmp/shell/02.sh
/tmp/shell/02.sh
/tmp/shell/02.sh: not found
Click to expand...
Click to collapse
Ah ok my mistake, you didn't quote anything I didn't realize that's what you were responding too
Likely noexec flag causing that issue.
Also, you can't invoke su from inside a shell script. It just doesn't work with this su binary.
yeah, I guess not. I hadn't realized that it wasn't a real 'su' before making this... too bad.
If anyone figures out how to get around that we'll be in business Unfortunately that's way beyond my expertise.
Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.
the2dcour said:
Okay, after fiddling a little bit and talking to a friend I may have solved some of the problems, mainly with the scripts executing and su working.
I will have to rewrite a bunch of things but should report back tonight.
Click to expand...
Click to collapse
su -c "command"
You'll have to allow superuser on the phone for every single command.
PM'd you my error. I tried manually editing the permissions, but that didn't work.
Running on GladAtrix2 v3
USB debugging on; USB set to none
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
Press any key to continue . . .
Changed /sdcard-ext to /sdcard in script. Got this error
Checking device state...
Obtaining temporary root access...pushing shell scripts
-------------------------
EXECUTION FAILED
Unable to chmod scripts.
-------------------------
* server not running *
Press any key to continue . . .
Running BETA_ubuntu-1.0.6.4.zip. File extracts to BETA_ubuntu-1.0.6.2 directory. Ran ubuntu-1.5.7.bat
Moved BETA_ubuntu-1.0.6.2 to C:\ Same error
The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.
the2dcour said:
The only easy workaround to that I can see at the moment is to
Code:
adb shell
su
chmod 777 /path-to-scripts/*
ls -l /path-to-scripts/*
make sure all the files are executable (should say rwxrwxrwx)
then remove the bit of code from 1.5.7.bat
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/bin/chmod 6755 /mnt/sdcard-ext/shell/* > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
If anyone can help me fix this problem I should be able to automate the chmod process using ririal's suggestion of su -c. The problem is that there are too many nested quotation marks in this section of the batch file, and I can't for the life of me figure out how to escape quotes so they pass through to adb:
Code:
set retval=
for /f "tokens=*" %%l in ('%~dps0adb.exe shell "/system/bin/su -c [U]'/bin/chmod 6755 /mnt/sdcard-ext/shell/*'[/U] > /dev/null 2>&1 && echo PASS"') do set retval=%%l
if "%retval%" neq "PASS" set message=Unable to chmod scripts. && goto abort
The underlined bit is where I need to escape either single or double quotes.
Click to expand...
Click to collapse
^ escapes batch, \ escapes shell. Hope this helps. If you zip up and send me the whole process in a single .sh file I can wrap it up in CWM for you.
This thread is now obsolete!
Use this thread to do way more!!!
THIS COULD BREAK EVERYTHING IN THE WORLD AND SCREW UP YOUR LIFE FOREVER!!!! YOUR PHONE COULD BE BRICKED!!! YOUR WIFE COULD LEAVE YOU AND YOUR PARENTS COULD DIE!!! DO THIS AT YOUR OWN RISK!!! MAKE SURE TO HAVE A COPY OF THE FASTBOOT FILES FOR THE BIONIC JUST IN CASE!!!
I got Chromium Browser to run on the Webtop. It's a little messy (have to open it through a terminal emulator) but it works. I borrowed heavily from Sogarth who made this thread.
Made it a little easier.
Unzip and place the webtopchromium folder on the root of /sdcard-ext
webtopchromium.zip
If you are plugged into a computer make sure to change USB Mode to charge only before you proceed.
Use a terminal emulator or adb to run these commands:
Code:
su
/usr/bin/sudo -H -u root bash
cd /mnt/sdcard-ext/webtopchromium
sh webtopchromium.sh
This may take 10 minutes or so...
When it is finished reboot...
Use a terminal emulator or adb to run these commands:
Code:
su
/usr/bin/sudo -H -u root bash
cd /mnt/sdcard-ext/webtopchromium
sh installdeb.sh
Now when inside webtop open a terminal emulator in the phone window and run:
Code:
su
/usr/bin/sudo -H -u adas bash
export DISPLAY=:0
chromium-browser
You can just run the installdeb.sh (much faster) if you don't want to backup webtop with rsync. You can always use the fast boot to fix either way.
**Thanks to tallnerd for suggesting the faster method**
**A huge thanks to Sogarth for discovering all this first for the Atrix**
reserved
To uninstall and revert back to the stock webtop:
Using adb with root access:
adb shell
su
mount -o rw,remount /dev/block/mmcblk0p12 /system
cd /system/bin
mv mountosh mountosh.new
mv mountosh.orig mountosh
cd /data
rm ubuntu.disk
Reboot
I tried this, but it broke my Xperia Play. The micro HDMI cable I bought also broke the micro USB port on my phone.
v1r7u41 said:
THIS COULD BREAK EVERYTHING IN THE WORLD AND SCREW UP YOUR LIFE FOREVER!!!! YOUR PHONE COULD BE BRICKED!!! YOUR WIFE COULD LEAVE YOU AND YOUR PARENTS COULD DIE!!! DO THIS AT YOUR OWN RISK!!! MAKE SURE TO HAVE A COPY OF THE FASTBOOT FILES FOR THE BIONIC JUST IN CASE!!!
I got Chromium Browser to run on the Webtop. It's a little messy (have to open it through a terminal emulator) but it works. I borrowed heavily from Sogarth who made this thread.
Get a copy of these debs and put them on your sdcard-ext.
chromium-browser
Dependencies
Make sure to unzip the debs.zip and copy the .deb files and the mountosh.new to the sdcard-ext.
Use adb or android terminal-emulator.
Now check to make sure you have at least 1G free:
Code:
/bin/df -h /data
There should be at least 1.0G under the Used column. If not, you won't have enough to create a decent disk. If so, then you can keep going:
Code:
su
/usr/bin/sudo -H -u root bash
mount -o rw,remount /dev/block/mmcblk0p12 /system
/bin/dd if=/dev/zero of=/data/ubuntu.disk bs=1024 count=1048576
/sbin/losetup /dev/block/loop7 /data/ubuntu.disk
/sbin/mkfs -t ext3 -m 1 -b 2048 /dev/block/loop7
mkdir /tmp/osh
/bin/mount -t ext3 /dev/block/loop7 /tmp/osh
At this point, we've created a 1 GB disk file (1,024×1,024=1,048,576), formatted it as ext3, and mounted it in /tmp/osh.
I'll assume that rsync is in /mnt/sdcard-ext:
Code:
mkdir /tmp/deb
/usr/bin/dpkg-deb -x /mnt/sdcard-ext/rsync* /tmp/deb
/tmp/deb/usr/bin/rsync -avx /osh/ /tmp/osh/
And now we have a duplicate of our /osh partition.
After that:
Code:
mv /system/bin/mountosh /system/bin/mountosh.orig
cp /mnt/sdcard-ext/mountosh.new /system/bin/mountosh
chmod 0755 /system/bin/mountosh
chown 0 /system/bin/mountosh
chgrp 2000 /system/bin/mountosh
You can now reboot your device, and you should now boot into the new partition we've just created.
Now Install the debs.
Code:
su
/usr/bin/sudo -H -u root bash
touch /osh/var/lib/dpkg/status
touch /osh/var/lib/dpkg/available
mkdir /osh/var/lib/dpkg/updates
dpkg -i --force-all --root=/osh /sdcard-ext/chromium*
dpkg -i --force-all --root=/osh /sdcard-ext/libxss*
dpkg -i --force-all --root=/osh /sdcard-ext/lzma*
You will get some errors from dpkg but just ignore them. Moto broke dpkg's way of telling what is already installed.
Now to run chromium you will need to start webtop like you usually do
then open a terminal-emulator in the phone window and type this
Code:
su
/usr/bin/sudo -H -u adas bash
export DISPLAY=:0
chromium-browser
Click to expand...
Click to collapse
You should make a chromium icon/app that will run that last command when you click it
Yeah. I definitely need to clean this up, but I just wanted to get things moving .
I'm anxious to try this. I'll gladly be the third person to do it, but I don't want to be the second. Someone with more experience than I give it a try.
updated to make it a little easier
Posting this from Chrome on Webtop. It is noticeably faster than Firefox. Like butta!
Thank you so much for putting this together!
Maybe I'm missing something here but when running the script/install all goes well til the very last line, when I enter the "chromium-browser" command it states bash: chromium-browser not found. Can someone give me an idea of what I'm missing or doing wrong here please
Check your /sdcard-ext/webtopchromium folder before you run the installdeb.sh and make sure these are there:
chromium-browser-inspector_12.0.742.112~r90304-0ubuntu0.10.10.1_all.deb
chromium-codecs-ffmpeg_10.0.648.205~r81283-0ubuntu0.10.10.1_armel.deb
chromium-browser_10.0.648.205~r81283-0ubuntu0.10.10.1_armel.deb
libxss1_1%3a1.2.0-2_armel.deb
lzma_4.43-14ubuntu2_armel.deb
If chromium-browser_10.0.648.205~r81283-0ubuntu0.10.10.1_armel.deb isn't there run:
Code:
cd /sdcard-ext/webtopchromium
/tmp/deb/usr/bin/wget https://answers.launchpad.net/~ubuntu-security-proposed/+archive/ppa/+build/2443315/+files/chromium-browser_10.0.648.205%7Er81283-0ubuntu0.10.10.1_armel.deb
Well this sucks, I did a full wipe/nandroid restore and now that it's done I go to download the files and they're not there. Can anyone re-upload the files for me please?
Why, oh why did Moto not use Chrome? It is faster and I have not had a single low memory warning while using Chrome. In fact, I have yet to have it register over 3% in memory manager. Thanks again V1r7.
I'll setup a host for the files soon. Check back later (im away from computer) tonight.
Sent from my DROID BIONIC using XDA App
Got the file off of my computer, still running into issues though. Verified that all of the correct files are there and installed/uninstalled a few times just to verify. Quick question are you guys running the webtop adaptor or the lapdock? I'm running on the lapdock and wondering if this would make any difference at all if you're using the webtop.
I'm using the lapdock. Sorry I don't know enough to help you out. I'm rooted and followed the instructions and it worked.
Goto your terminal and type
busybox find /osh/usr/bin -name chrom*
Let me know what you find.
Sent from my DROID BIONIC using XDA App
When I type those commands it does absolutely nothing, just goes on to the next terminal line the same as the last.
try:
busybox find /sdcard-ext/webtopchromium/ -name chrom*
v1r7u41 said:
try:
busybox find /sdcard-ext/webtopchromium/ -name chrom*
Click to expand...
Click to collapse
When I type that it comes up with these results:
/sdcard-ext/webtopchromium/chromium-browser-inspector_12.0.742.112-r90304-0ubuntu0.10.10.1_all.deb
/sdcard-ext/webtopchromium/chromium-codecs-ffmpeg_10.0.648.205-r81283-0ubuntu0.10.10.1_armel.deb
/sdcard-ext/webtopchromium/chromium-browser_10.0.648.205-r81283-0ubuntu0.10.10.1_armel.deb
/sdcard-ext/webtopchromium/chromium-browser_10.0.648.205-r81283-0ubuntu0.10.10.1_armel.deb.1
/sdcard-ext/webtopchromium/chromium-browser_10.0.648.205-r81283-0ubuntu0.10.10.1_armel.deb.2
Open terminal:
su
/usr/bin/sudo -H -u root bash
cd /sdcard-ext/webtopchromium
dpkg -i --force-all --root=/osh chrom*
exit
/usr/bin/sudo -H -u adas bash
export DISPLAY:0
chromium-browser
How to install ubuntu on the Droid 4
Note to mods: this thread is a branch off of this thread
Huge thanks to zacthespack for creating the ubuntu installer app and original boot script and to zeroktal for modifying the script to work on the D4 and helping me get it working on my device.
I decided to take my experience in setting this up and put it into a how-to so that others could enjoy the experience of having ubuntu on the Droid 4. If zackthespac or zeroktal have any problems with me making and putting this guide up, please let me know and I will remove it.
Knowledge Required:
working knowledge of command line
working knowledge of vi
OR the ability to learn how to use both
Tools Required:
A rooted Motorola Droid 4
BusyBox (Android Market)
Terminal Emulator (Android Market)
Android VNC Viewer (Android Market)
Ubuntu Installer App (Android Market)
zeroktal's ubuntud4.zip file (attached to this post and mediafire)
Vi Cheat Sheet (lagmonster.org)
Step by Step:
Install BusyBox, Terminal, and Android VNC Viewer
Install and run Ubunutu Installer App
Follow the on-screen instructions and click next
Download either the Small or Large image to your phone, (use zeroktal's ubuntud4.zip file instead of the boot script provided in the guide) after the image downloads (will take a while because the file is HUGE) click next
For this screen, the instructions differ from the app.
1. With your D4 plugged into your PC in USB Mass Storage, create a directory (folder) called ubuntu in the EXTERNAL sdcard's root*
2. Extract the image you downloaded to that directory
3. Download and extract the attached .sh (ununtud4.zip) to that directory
4. Disconnect your phone from your PC
5. Open terminal and run the following commands:
su [ENTER]
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext [ENTER]
cd /mnt/sdcard-ext/ubuntu [ENTER]
sh ubuntud4.sh [ENTER]
960x540 [ENTER]**If you get an error message: ubuntud4.sh: 45: syntax error: end of file unexpected (expecting "then") see troubleshooting section below.killall -TERM Xtightvnc [ENTER]
vncserver :1 -geometry 960x540 [ENTER]**6. Open androidVNC app and enter the following settings:
Nickname: Anything you want
Password: ubuntu
Address: localhost
Port: 5901
Color Format: 24-bit color (4 bpp)
7. Hit connect
8. Hit your menu soft button and then set input mode to touchpad
9. You have ubuntu on your Droid 4!
To "shut down" ubuntu:
press the menu button, select disconnect in VNC
In terminal type this command 3 times (terminal will close itself when you are done):
exit [ENTER]
To "start up" ubuntu again:
Follow steps 5-8 above
Troubleshooting:
If you get the error message: ubuntud4.sh: 45: syntax error: end of file unexpected (expecting "then") you are about to have fun with vi at the command line.
Do the following from inside terminal:
su [ENTER]
cd /mnt/sdcard-ext/ubuntu [ENTER]
vi ubuntud4.sh [ENTER]If you see ^M or ^ at the end of any line (remember to scroll all the way to the right to see the end of long lines) remove it. once you do that, everything should work just fine. (See the Vi Cheat Sheet above for help with Vi)
Note: Vol Up + E is [ESC] by default in this terminal emulator
Notes:
* It does not have to be on the external SD, but if you put it on the internal SD you will have to modify things as needed-- if you dont know what needs to be changed, just put it on the external SD.
** Screen size can be whatever you want it to be, but 960x540 is the size of the D4 screen.
*** This is a fairly involved process... especially when it comes to editing the .sh file in vi things can get very frustrating and hard, but just take your time and you will get it. As always, doing anything with root access on your phone, especially on the command line has risks. I am not responsible if anything goes wrong with your phone... proceed at your own risk!
greekchampion04 said:
Notes:
* It does not have to be on the external SD, but if you put it on the internal SD you will have to modify things as needed-- if you dont know what needs to be changed, just put it on the external SD.
** Screen size can be whatever you want it to be, but 960x540 is the size of the D4 screen.
*** This is a fairly involved process... especially when it comes to editing the .sh file in vi things can get very frustrating and hard, but just take your time and you will get it. As always, doing anything with root access on your phone, especially on the command line has risks. I am not responsible if anything goes wrong with your phone... proceed at your own risk!
Click to expand...
Click to collapse
I actually got it up and running on my internal sdcard partition. Pretty much just have to modify the Mount remount command, and a few lines in the script.
Here's the original command
Code:
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext
And the modified one
Code:
mount -o remount,rw,exec,suid /dev/block/vold/179:57 /mnt/sdcard
Only things you have to change are the device location(179:57) and mount location(drop the -ext after sdcard)
Now, after that you also have to modify the script a bit. Just go through it, and anywhere that you see sdcard-ext, drop the -ext off the end.
thanks for putting that up for everybody! like i said, if you know what you are doing its not a hard swap to make.
Is anyone else getting just a gray screen when they remote in? What could be causing this?
i had that same problem at first... did you use zeroktal's ubuntud4.zip file? or did you use the ubuntu.sh file included in the app?
I used the sh file included. I did however fix the problem, when mounting at the start i confused vold with void. I did not get the file system mounted properly. This method does work!! however I am currently trying to get bash on my droid to replace sh as the shell. I've checked the forums but have not found anything yet about someone installing bash on the droid 4. With no way for nandroids I feel i should wait before I kill sh.
Sent from my DROID4 using XDA App
If you mod your init.sh in your root directory to the following, your vnc will work on startup without issue. It will also shutdown vnc on exit.
#!/bin/bash
#############################################
# Asks User to screen size and saves as REZ #
#############################################
#echo "Now enter the screen size you want in pixels (e.g. 800x480), followed by [ENTER]:"
#read REZ
##############################################
# Pick which desktop environment to use, this#
# is done by having a xstartup file for each #
# desktop, then renaming the one you want to #
# use to 'xstartup' before boot #
##############################################
echo "Please select which Desktop environment you want to use, type the number to select it then press [ENTER]"
echo "1 - LXDE"
echo "2 - Gnome"
echo "Make your Selection:"
read DESKTOP
if [ $DESKTOP == 1 ]
then
mv /root/.vnc/lxstartup /root/.vnc/xstartup
fi
if [ $DESKTOP == 2 ]
then
mv /root/.vnc/gxstartup /root/.vnc/xstartup
fi
###########################################
# Tidy up previous LXDE and DBUS sessions #
###########################################
rm /tmp/.X* > /dev/null 2>&1
rm /tmp/.X11-unix/X* > /dev/null 2>&1
rm /root/.vnc/localhost* > /dev/null 2>&1
rm /var/run/dbus/pid > /dev/null 2>&1
############################################################
# enable workaround for upstart dependent installs #
# in chroot'd environment. this allows certain packages #
# that use upstart start/stop to not fail on install. #
# this means they will have to be launched manually though #
############################################################
dpkg-divert --local --rename --add /sbin/initctl > /dev/null 2>&1
ln -s /bin/true /sbin/initctl > /dev/null 2>&1
###############################################
# start vnc server with given resolution and #
# DBUS server, (and optionally an SSH server) #
###############################################
dbus-daemon --system --fork > /dev/null 2>&1
/etc/init.d/ssh start
vncserver :1 -geometry 960x540
echo
echo "If you see the message 'New 'X' Desktop is localhost:1' then you are ready to VNC into your ubuntu OS.."
echo
echo "If VNC'ing from a different machine on the same network as the android device use the 1st address below:"
##########################################
# Output IP address of android device #
##########################################
ifconfig | grep "inet addr"
echo
echo "If using androidVNC, change the 'Color Format' setting to 24-bit colour, and once you've VNC'd in, change the 'input mode' to touchpad (in settings)"
echo
echo "To shut down the VNC server and exit the ubuntu environment, just enter 'exit' at this terminal - and WAIT for all shutdown routines to finish!"
echo
###############################################################
# Spawn and interactive shell - this effectively halts script #
# execution until the spawning shell is exited (i.e. you want #
# to shut down vncserver and exit the ubuntu environment) #
###############################################################
/bin/bash -i
#########################################
# Disable upstart workaround and #
# kill VNC server (and optionally SSH) #
# Rename used xstartup to its first file#
#########################################
killall -TERM Xtightvnc
/etc/init.d/ssh stop
Also save the follow lines between ### as remount.sh on your system partition. Then chmod 755 /system/remount.sh. Now you can just run run from a terminal /system/remount.sh and voila it remounts correctly and starts ubuntu(with the above fixes). Im still working on the unmounts.
####### for the internal sd card
mount -o remount,rw,exec,suid /dev/block/vold/179:57 /mnt/sdcard
/mnt/sdcard/ubuntu/ubuntu.sh
######
OR
####### for the external sd card
mount -o remount,rw,exec,suid /dev/block/vold/179:1 /mnt/sdcard-ext
/mnt/sdcard-ext/ubuntu/ubuntu.sh
#######
great stuff!
feel free
Feel free and take, modify, repost or edit anything I touch.
QUESTION:
After I delete all the ^M and ^ what do i do next? I try to hit the command ":x" to exit and save changes but it just creates another line. Also when I press VOL UP + E to escape nothing happens.
PhanTuhC said:
QUESTION:
After I delete all the ^M and ^ what do i do next? I try to hit the command ":x" to exit and save changes but it just creates another line. Also when I press VOL UP + E to escape nothing happens.
Click to expand...
Click to collapse
In vi, the command to save and exit is :wq (probably short for write and quit).
remember, read up on the vi quick-reference guide: http://www.lagmonster.org/docs/vi.html
OK I fixed it but now its not letting me connect with androidVNC. All the settings entered is correct but when I try to connect it says:
"VNC connection failed!" localhost/127.0.0.1:5901 - Connection refused"
ok, i've gone thru this a few times (slowly and deliberately) and must be missing something...the directions seem pretty straightforward! here's what i know...
busy/terminal/vnc are all installed
small 2.5gb image is unzipped in /sdcard-ext/ubuntu directory
the attached .sh file from page 1 is in the same directory
i removed all ^M using vi
but when I try sh ubuntud4.sh i get an error...
"mkdir failed for /data/local/mnt/ubun, No such file or directory"
(plus a few other errors)
should the directory be "ubun" or "ubuntu"? am I typing something incorrectly?
copy and paste new script
Copy and paste the new scripts I posted. They will fix your problem. Remember to use the remount script from /system/ the rest will work perfectly if you are root. I'll check back later on your progress.
Ok, well I started from scratch (deleted both .img and .sh files) and it's still not working.
I have all the apps installed (and yes rooted, SU works just fine)
I used Ubuntu Installer app to download the image zip (tried both the large and small img)
I downloaded the .sh file from the first post
The /sdcard-ext/ubuntu/ folder now has two files: "ubuntu.img" and "ubuntud4.sh"
All ^M characters have been removed from .sh file
Still no joy...
Ideas? What am I missing?
In terminal, I can set SU permissions and the mount/cd commands work just fine...it's the last sh command that spits out a bunch of errors about not being able to create/find the directories.
I'm going to format the sdcard and try again...any help is appreciated.
Update: Even after re-formatting the SD and following the steps exactly, no luck!
Did you remember to remount the sdcard with exec and suid permissions?
Andbuntu will work much better than this method. It works on every single phone with modification to the "environmental variables".
http://code.google.com/p/andbuntu/
Follow the directions in the script to make the process much easier than the first post.
instructions:
generate an image with rootstock on an ubuntu computer.
put it on /sdcard/ubuntu/ubuntu.img
run the script on your phone with "sh /path/to/script"
Here is the script. http://andbuntu.googlecode.com/svn/trunk/uboot
Also, run "firstRun" to make things like terminals work properly.
Adamoutler: That didnt work for me. The permissions were incorrect on the mounted partitions.
Sent from my DROID4 using XDA App
Upfronts: I'm using NottachTrix 1.3.1 with the 2.3.6 Webtop. I'm also a programmer and a network administrator, so I might be a little more comfortable poking around in things that might break my phone than other users. Don't do anything you aren't comfortable with! I'm just reporting my findings. Your phone, your comfort level, your business!
I wanted to get my new lapdock to use the cellular network without jumping through any "enable/disable mobile hotspot" hoops. I finally got all the webtop2sd stuff running, including a working lxterminal and synaptic. I was running synaptic as root from a bash shell ("sudo bash" to give me a root shell, other commands as needed). I noticed that synaptic worked without wifi but firefox didn't. I could also ping various websites with no trouble under the root shell, but the adas user could not. adas COULD ping IP addresses, though, so it seemed like there was a firewall in place that was blocking adas from resolving domain names.
As it turns out, there is a firewall in place that is blocking the adas user from resolving domain names.
Webtop seems to be using iptables to restrict access to the default login user. I typed "iptables -L" to view all the iptables-based firewalling that was going on. Sure enough, three entries existed to block network traffic for the user "adas". After an "iptables -S" to get the commands that were used to turn on the filtering, I was able to reverse the process. (Hint: -A adds a rule, -D deletes one)
From here, I could do a lot of things -- create a script to disable iptables on demand, block the commands from running in the first place, dance a happy little jig... I won't embarrass myself by revealing which I actually did, but hopefully there's enough in this post that will help others resolve their problems in a similar manner!
(By the way, every time the phone is docked, it re-blocks network access, apparently using a file called "syslog-restart".)
If you could fix this would be great, I have the same rom and everything and I use my LapDock in my business and it is always a pain to make it connect and most of the times it fails to connect for me.
Cheers
The following presumes a working lxterminal and synaptic (or apt-get). If you haven't run the webtopscripts to fix the broken dependencies, now's a good time to poke that bear*.
(Type the stuff that's in bold -- comments are in italics)
In lxterminal:
sudo apt-get install nano (Command-line text editor)
iptables -S (generates a list of rules that iptables is currently using)
copy any lines in the "-P OUTPUT ACCEPT" section that start with "-A"
create a new file in nano by typing nano fwdisable.sh
at the top of the new document, type #!/bin/bash and press Enter
paste the copied lines into the resulting screen
insert iptables at the start of each line and change "-A" to "-D" (A for add, D for delete)
once the file looks the way you think it should, exit the program with CTRL-X, saving the file when it asks
at the command prompt, type chmod 755 fwdisable.sh
run your new shell script with sudo ./fwdisable.sh
open up a web browser and enjoy!
* Please don't poke any bears. While they may look fluffy, they react poorly to being poked. There's probably a good metaphor about messing around in the internals of your phone in there somewhere, but for the life of me I just can't find it!
Did you guys can edit a ROM that has it all in a matter of WebTop, I can not make it work on my Atrix in any way.
I do not have the device only the HDMI cable.
Trying to save fwdisable.sh nano give me following error
"Error writing fwdisable.sh Read-only file system"
Please advise
pederb said:
Trying to save fwdisable.sh nano give me following error
"Error writing fwdisable.sh Read-only file system"
Please advise
Click to expand...
Click to collapse
Sounds like you're not root or su
Sent from my MB860 using Tapatalk 2
Ok the drive was write protected, but now I get
" ./fwdisable.sh: line 2: -D: command not found"
" ./fwdisable.sh: line 3: -D: command not found"
I was not able to get it to work with Nano so I used gedit instead but should not make a difference, right?
Any idea?
maybe someone can create a flashable fix so that its easy for some of us noobs lol
studean said:
The following presumes a working lxterminal and synaptic (or apt-get). If you haven't run the webtopscripts to fix the broken dependencies, now's a good time to poke that bear*.
(Type the stuff that's in bold -- comments are in italics)
In lxterminal:
sudo apt-get install nano (Command-line text editor)
iptables -S (generates a list of rules that iptables is currently using)
copy any lines in the "-P OUTPUT ACCEPT" section that start with "-A"
create a new file in nano by typing nano fwdisable.sh
at the top of the new document, type #!/bin/bash and press Enter
paste the copied lines into the resulting screen
insert iptables at the start of each line and change "-A" to "-D" (A for add, D for delete)
once the file looks the way you think it should, exit the program with CTRL-X, saving the file when it asks
at the command prompt, type chmod 755 fwdisable.sh
run your new shell script with sudo ./fwdisable.sh
open up a web browser and enjoy!
* Please don't poke any bears. While they may look fluffy, they react poorly to being poked. There's probably a good metaphor about messing around in the internals of your phone in there somewhere, but for the life of me I just can't find it!
Click to expand...
Click to collapse
Follow this guide guys, it is ridiculously easy, no flashing needed.
I also added a button to the AWN dock with the command:
sudo ./fwdisable.sh
Which will give you one click disabling of the firewall. It will restart the firewall each time you dock/undock it appears, so just dock it, click the firewall disable button and you are good to go.
Norcalz71 said:
Follow this guide guys, it is ridiculously easy, no flashing needed.
I also added a button to the AWN dock with the command:
sudo ./fwdisable.sh
Which will give you one click disabling of the firewall. It will restart the firewall each time you dock/undock it appears, so just dock it, click the firewall disable button and you are good to go.
Click to expand...
Click to collapse
Well I'm still getting my error no matter how many time I try it again
man i cant even get webtop2sd to work. as soon as i run it on my phone it force closes. i havent even got it to open longer then super user request yet.
fingers crossed on a cwm flashable lol.
Thanks for this. I was wondering why apt-get update would work but adas couldn't ping out properly over 3g.
Also, thank you for the walk through in editing iptables there. Interesting that they chose to use that over something more proprietary, or well hidden.
I had this problem at first, too -- I think it was busybox-related. There's a busybox updater or two in the Market (I mean, "Play Store") that will bring you up to speed and let you install webtop2sd.
Sorry it's been so long since my last post! It appears that you didn't insert an "iptables " before the "-D". Check to make sure that each line after the "#!/bin/bash" starts with "iptables -D" instead of just "-D" and see if that takes care of the problem. (Also make sure you execute the script with a "sudo" -- iptables won't work properly as a regular user...)
studean said:
Sorry it's been so long since my last post! It appears that you didn't insert an "iptables " before the "-D". Check to make sure that each line after the "#!/bin/bash" starts with "iptables -D" instead of just "-D" and see if that takes care of the problem. (Also make sure you execute the script with a "sudo" -- iptables won't work properly as a regular user...)
Click to expand...
Click to collapse
should it be,
iptables -D
or
-D iptables
[email protected]:/$ sudo iptables -S
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
-A OUTPUT -d 127.0.0.1/32 -p tcp -m tcp --dport 8086 -m owner ! --uid-owner adas -j REJECT --reject-with icmp-port-unreachable
-A OUTPUT -d 127.0.0.1/32 -p tcp -m tcp --dport 8085 -m owner ! --uid-owner adas -j REJECT --reject-with icmp-port-unreachable
This is how it looks before editing
It should be "iptables -D". Based on the output from your "iptables -S" command, the file should look like this:
Code:
#/bin/bash
iptables -D OUTPUT -d 127.0.0.1/32 -p tcp -m tcp --dport 8086 -m owner ! --uid-owner adas -j REJECT --reject-with icmp-port-unreachable
iptables -D OUTPUT -d 127.0.0.1/32 -p tcp -m tcp --dport 8085 -m owner ! --uid-owner adas -j REJECT --reject-with icmp-port-unreachable
I also had a third line (that escapes me at the moment -- I'm on a different machine) that further blocked access, but apparently there is a bit of variation in the configuration... At any rate, create the file using whatever text editor you feel most comfortable using, then "chmod 755" the file to make it executable. If you call it "fwdisable.sh", then you should type "chmod 755 fwdisable.sh" in lxterminal and run the file with "sudo ./fwdisable.sh" to disable the firewall.
Good luck! If you want to know more about the workings of this stuff, google "bash scripting guide" and (for a general overview) read the wikipedia page for "iptables". It will help you understand what's up with all these seemingly weird commands...
That worked, but now I get these error messages?
[email protected]:/$ sudo ./fwdisable.sh
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
[email protected]:/$
Click to expand...
Click to collapse
Please advice
Cheers
You should be okay with those error messages. I'm not entirely sure WHY it's looking for that file, but it's "normal" output. If you'll remember, it's the same output you got in the "iptables -S" command... Something about accessing iptables causes the system to look for that file. (I just haven't been bothered enough over it to check yet...)
To verify, run "sudo iptables -S" again to see if there is anything left. You should just see three lines:
Code:
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
Anything more than that and you might need to edit your script as you did before. If the output from "iptables -S" looks like the above, though, fire up firefox and give it a whirl!
studean said:
You should be okay with those error messages. I'm not entirely sure WHY it's looking for that file, but it's "normal" output. If you'll remember, it's the same output you got in the "iptables -S" command... Something about accessing iptables causes the system to look for that file. (I just haven't been bothered enough over it to check yet...)
To verify, run "sudo iptables -S" again to see if there is anything left. You should just see three lines:
Code:
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
Anything more than that and you might need to edit your script as you did before. If the output from "iptables -S" looks like the above, though, fire up firefox and give it a whirl!
Click to expand...
Click to collapse
[email protected]:/$ sudo iptables -S
-P INPUT ACCEPT
-P FORWARD ACCEPT
-P OUTPUT ACCEPT
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
FATAL: Could not load /lib/modules/2.6.32.56-MB860-faux123-GB-024/modules.dep: No such file or directory
-A OUTPUT -o ppp0 -m owner --uid-owner adas -j REJECT --reject-with icmp-port-unreachable
[email protected]:/$
Excellent! This means you're almost there! As before, copy/paste that line into your shell script, change the "-A" to "iptables -D" and that SHOULD be the end of it.
No, really. This time for sure. Just re-run the script when you're done (ignoring the "fatal" stuff) and you'll be browsing in no time!