I do not get H symbol(whatever it is ). I only see 3G. WHen I serachg for networks it does bring back H for a few seconds on full network but them immediately switches back to 3G.
Can anyone help please ?
you can chek the instellingen from your provider and you can put these manual for optimal use
Sorry... but I dont really know what instellingen is. Can you please point me to a guide or something ?
I think he means apn settings, might have been a translation issue. First, make a nandroid backup. Then change your csc. Then run the restore. Finally, change the apn settings to your provider settings, then, still on wireless and network, switch to wcdma only and go to network providers. Pick the one that's there and then switch back to gsm and wcdma.
Hit the thanks button if that does it for you.
Related
hi... my name is Juan and I'm looking for help from chile...
I want to enable HSPA / HSDPA in my samsung galaxy S, because here is very slow our mobile network.
Me and my girlfriend we have the same cellphones, our configs are the same (options, mobile company, acces point names, everything!)
She can "surf" with HSDPA at 1.9mb/s but my phone is always in EDGE and everytime that I make a test with SpeedTest, my speed is 0.07Mb/s!!!!!
I read EVERY PAGE, in the thread: http://forum.xda-developers.com/showthread.php?t=837716
and I was looking more for help here...
I sought on internet and I tried EVERYTHING... but nothing happen...
Please, exist another way to change the HSPA / HSDPA from 0 (disable) to 1 (enable)???
please, help!
thank you!
no one?
any idea? change a variable inside the root folder??? please help.
thanks!
First do you have 3g enabled from your operator?
Secondly make sure your network is not set to gsm only in your handset
Im having this problem also.
Trying to flash CM7 and having issues. I believe the answer is to enable HSDPA.
Has anyone managed to successfully get this working. Im on Orange UK if that helps.
Did you followed this procedure:
Go to the phone dialer pad and enter this code: *#301279#
Click [2] CHANGE HSPA REVISION
Click [1] RELEASE 99 (HSPA OFF)
Then you should see something like:
CHANGE_R99
HSDPA OFF, HSUPA OFF
?
I've exactly the same issue. I have tried the *#301279# code and change it to on, but it just won't. I'm going into "Click [2] CHANGE HSPA REVISION" and selecting the HSDPA to on. But if I go back and check the status it is still 0. Is this has something to do with the carrier? Or maybe after selecting the value you need to save something? Desperate!
I have the same problem. I have hsdpa 0 hsupa 0 and can't turn it on anybody has solution ? I wanted flash cm7 but I can't do it without hspa enabled
Yup same issue here. Was going to create a new thread, but perhaps I should bump this one instead.
*#301279 is permanently ingrained in my head now, but I just can't seem to modify any settings through it.
Suggestions if anyone new has come on board?
if you are all running CM7 I think you need to flash to a 2.2 rom, enable HSPA in that rom and then flash back to CM7. I read that somewhere in the tutorials for previous versions and not sure if this bug still exists but just so you know. good luck
necro.- said:
hi... my name is Juan and I'm looking for help from chile...
I want to enable HSPA / HSDPA in my samsung galaxy S, because here is very slow our mobile network.
Me and my girlfriend we have the same cellphones, our configs are the same (options, mobile company, acces point names, everything!)
She can "surf" with HSDPA at 1.9mb/s but my phone is always in EDGE and everytime that I make a test with SpeedTest, my speed is 0.07Mb/s!!!!!
I read EVERY PAGE, in the thread: http://forum.xda-developers.com/showthread.php?t=837716
and I was looking more for help here...
I sought on internet and I tried EVERYTHING... but nothing happen...
Please, exist another way to change the HSPA / HSDPA from 0 (disable) to 1 (enable)???
please, help!
thank you!
Click to expand...
Click to collapse
Enable 3g from your operator. Then go to settings > wireless and network > mobile networks > [select] use packet data, set network mode to WCDMA/HSDPA/UMTS.
Should work now.
I have the same problem..
but when i go to settings > wireless and network > mobile networks > [select] use packet data, set network mode to DSM/WCDMA (auto mode)
Where is HSDPA & UMTS ?
anyone can help..
This worked for me.
1. dial *#301279#
2. select 2
3. select 3
4. hit back key to exit.
5. go to Settings->Wireless Networks->Mobile Networks>Network
Mode. Select GSM/WCDMA(Auto Mode) or option 1 whatever that is.
6. hit back key to exit.
7. If still not working toggle airplane mode. This step should not be needed though. If you wait a few seconds you should see the 3g/h/h+ appear.
Hi,
I own a LG Optimus 2x (P990) running on stock GB with 0725 baseband. One major problem I'm facing with it is it keeps losing the signal completely. After researching online, I found out about the 4636 hidden menu (*#*#4636#*#*) and then changing the network type to GSM auto (PRL). This helped a little. However, the settings dont "stick". After few days, or sometimes, a couple of hours, they go back to WCDMA preferred which causes a complete loss of connectivity for me. How do I save these settings? I dont really use 3G as its not feasible in my region yet. Can someone please suggest something?
Why didn't you just change it at the settings menu under wireless & network? You can set to 'only use 2g network'.
tablighs said:
Why didn't you just change it at the settings menu under wireless & network? You can set to 'only use 2g network'.
Click to expand...
Click to collapse
I've tried that before going into the hidden menu. Same thing happens. After sometime, it kinda forgets that its supposed to use GSM and reverts to WCDMA
Happens to me too, i am on temasek's Kang, although it happens randomly and isnt that frequent in my phone so i dont worry bout it much.
Even its random for me. But when it happens, I end up missing calls and texts coz of it. Its soo irritating when the phone is unable to perform its basic functions correctly. I really dont understand why does the device revert back to WCDMA when i'm telling it to use GSM
Turn OFF and then ON phone.
Set to 2G only and save
Turn phone OFF/ON
I was just fighting against the opposite, I want it to be on WCDMA only but the config was resetting every time I restarted the phone or causing signal loss. A few minutes ago I matched the RIL with the baseband even with recommendation and it just worked!
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
i have shifted my data plan from 2g to 3g vodafone in india, can anyone advice if we need to change the settings in our note, as cannot find any difference in 2g and 3g...thanks in advance
yes the APN settings are different from GPRS.. check with the provider for the correct APN settings and enter it.. also you can check on their website.
when the phone is using 3G you should see 3G or H+ next to the signal indications
thanks bro, but i could find the solution, you need to go in settings and then in mobile networks, you should select wcdma option and then check the user data package..then it reflect's 3G or h+ and even speed..
I've had this problem across multiple roms. My phone will only transfer data on LTE, when I am in an area that does not have LTE coverage, my phone does not automatically downstep to 3g. It just loses data, and shows an exclamation over the signal meter. HOWEVER, if I go into cellular settings, and manually set 3g CDMA it will connect to 3g. All speeds seem normal LTE 15-30mbps, 3g 1-3mbps. I have no idea why it doesnt downstep to 3g on it's own. It's like it's stuck on LTE only. Any idea how to rectify this?
I posted this in the forum for my ROM just to see if anyone knew anything. Someone suggested I try a ##72786# reset while on Sense, and if that fails, try ##786# reset. I've done both of those with no success.
I just tried wiping my device again and starting over doing the hands free activation. Still not working. Anyone seen this?
*#*#4636#*#* choose phone info , then scroll down you will see a drop down list which you can choose from. I think the option you should be choosing is "LTE, CDMA" or the "CDMA + LTE/EvDo auto" , you can play around with other options as it's safe and reversible (avoid WCDMA options they will drop signal).
Also if you are using stock rom try updating prl from Settings > System Updates.
Vcek said:
*#*#4636#*#* choose phone info , then scroll down you will see a drop down list which you can choose from. I think the option you should be choosing is "LTE, CDMA" or the "CDMA + LTE/EvDo auto" , you can play around with other options as it's safe and reversible (avoid WCDMA options they will drop signal).
Also if you are using stock rom try updating prl from Settings > System Updates.
Click to expand...
Click to collapse
Thank you! I wiped and reflashed everything with a sense based rom a couple days ago. I just verified this setting, and it is set to "CDMA+LET/EvDo Auto" I'm hoping that the issue is resolved. I wont know until i'm in an area where i lose LTE. Thanks for your help.
Hi Anyone know how to set 3G as preferred network? Apparently I need to do this to be able to place calls through Vodafone's Sure Signal box, but the only options I see are:
4G (preferred)/WCDMA/GSM
WCDMA Only
WCDMA (preferred)/GSM
I see to recall there might be a settings menu which can be dialled in on the keypad to change what's displayed in this list
kc1 said:
Hi Anyone know how to set 3G as preferred network? Apparently I need to do this to be able to place calls through Vodafone's Sure Signal box, but the only options I see are:
4G (preferred)/WCDMA/GSM
WCDMA Only
WCDMA (preferred)/GSM
I see to recall there might be a settings menu which can be dialled in on the keypad to change what's displayed in this list
Click to expand...
Click to collapse
No you don't have to change anything. I have a Sure Signal box and the phone automatically drops back to 3G when in the house and picks up 4G when outside. Setting your phone to 3G means you're limiting yourself to only 3G masts and there are less and less of them these days.
Just make sure you have set up the Sure Signal box correctly.
Turn your phone off and take the sim out. Register it on the suresignal via the vodafone website. Wait ten minutes. Put the sim back in the phone and turn it on. It will then connect to the SureSignal. I kid you not, these are the instructions I got from being on the phone to Vodafone tech support. (I couldn't get my phone to connect to my newly purchased SureSignal box).
If you've added your phone and it's not connected, then go back into the control panel on the vodafone website and delete your phone from the suresignal, wait ten minutes and then follow the instructions above.
Edit: the menu you're looking for can be found by typing *#*#7378423#*#* on your phone keypad, but I advise against messing with it.