Hey,
Today i wanted to flash CyanogenMod 7.
So i went into Recovery Menu and selected "apply update.zip" (or something like that). After that i got an error message wich said "E:Can't mount /dev/block/mmcblk0p1". I formatted the sd-card in the android settings but this didn't help, too.
I searched for the error on the forums and found out that i have to boot into fastboot mode and type in this code in the terminal (windows) : "fastboot oem enableqxdm 0" . After i did that an error on my pc appeared saying : "The application was unable to start correctly (0xc0000013). Click OK to close the application."
I searched for the error on google but couldn't find anything.
What went wrong ?
How can i fix the sd-card ?
Try to format the SD on the PC directly. You can use any adapter from Mini to USB
I Tried it already 3 times and tried another sd-card.
Nothing worked for me.
I read that i have to launch in fastboot-mode and type in some commands over the console (pc). I don't know if it is even possible to get into fastboot-mode with the Milestone. I would appreciate any help.
Thanks
Push
Please help me. I searched everywhere, but still can't find any solution for this problem... I wan't CyanogenMod7 on my Milestone but nothing works
I have the same problem with my Milestone. Anyone know how to fix this?
Related
Ok. So yesterday night I was trying to give my G1 a new ROM. I wasn't really concentrating. I was tired. I've done it successfully before. I was following the instructions on Cyanogen Wiki for phones already with custom SPL and OTA.
Something screwed up, I did the firstROM a while ago so it probably wasn't the right one. Maybe it needed deathspl.
Regardless, it is now stuck on the T-Mobile G1 screen (and its stuck, I've left it for an entire night: still stuck) . I can take out the battery and boot into recovery mode. So at this point I basically need to mount my SD through USB (i dont have adapter) so I can start from scratch with SPLs, Radios and Images. This is the problem.
I've read you can do it by pressing Alt+X, going into console/terminal and type some commands in. I press Alt+X but nothing happens. I'll tell you what happens when I do other things:
---------
Alt+S= E:Can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0) (Invalid argument)
Can't mount sdcard
Alt+A= <<same thing except for last line:>> E:Can't mount SDCARD:
Move apps+dalvik-cache to SD: Error: run apps2sd via adb
Apply sdcard:update.zip: Can't mount sdcard
Apply sdcard:choose zip: E: CAn't mount SDCARD:
Wipe data/factory reset: Data wipe complete.
Nandroid v2.2 backup: Can't mount sdcard
Nandroid v2.2 restore: Can't mount sdcard, aborting.
Format SD : fat32+ext2+swap: Format complete!
Format SD : fat32: Format complete
Repair ext filesystem: Error : run e2fsck via adb!
Convert ext2 to ext3: Error : run upgrade_fs via adb!
Fix package uid mismatches: Error : run fix_permissions via adb!
-----------
Alrighty. So its royally stuffed up.
Please help! I'm telling myself its not bricked, because it has small but definite programs and calculations running.
It mentions adb, and I have used it in the past to skip through a tutorial (back when you couldn't skip through it) because it needed internet connection and at the time I didnt have data transfer on my SIM, but I did have Wireless. How exactly I did this escapes. Do I need to download anything?
I have no idea if this helps, but I was trying to think of a sort of prize for anybody to help and I have Google Wave invites. Whether thats a big deal or not, I have no idea.
Please help!
Well you can assure yourself that you are not bricked.
First check your SPL and Radio.
If they are:
SPL=1.33.2005
Radio=2.26.19.26I
then your good in that area.
you just need to wipe everything and retry the ROM.
If not then you might want to get the latest stuff and try again that way.
Thanks
Thanks.
But how do I check?
I can't get into the proper Android OS, the three states my phone can be in are:
Off
Stuck on T-Mobile Screen
Recovery Mode
Also, how can I get some new stuff on my SD card if I the only things I have are: the phone described above (i.e. the only workable state being recovery mode), an SD card and a USB cable.
Whats your email so I can send you an invite if you want it?
lachy95 said:
Thanks.
But how do I check?
I can't get into the proper Android OS, the three states my phone can be in are:
Off
Stuck on T-Mobile Screen
Recovery Mode
Also, how can I get some new stuff on my SD card if I the only things I have are: the phone described above (i.e. the only workable state being recovery mode), an SD card and a USB cable.
Whats your email so I can send you an invite if you want it?
Click to expand...
Click to collapse
To see you SPL and Radio do this:
Turn off phone
Hold Home and End Call buttons.
If you see:
Hboot-1.33.2005 or something like that then that means that you have the latest SPL
Radio-2.22.19.26I then you have the latest Radio too.
First we need to check to see what your SPL and radio is before you try to do anything that involves flashing ROMs
What recovery image do you have?
Can't see it
When I press Home + End Call I can see is:
Android System Recovery:
<the options I described before, with their errors>
The above is in green font, the background is black with an HTC logo, at the very bottom is white font that says this:
Build: RAv1.2.1G
Sorry for not replying as fast as could. I mega-ly appreciate this so I'll try to be more vigilant.
I'll look around for other key combos to get some more info.
lachy95 said:
When I press Home + End Call I can see is:
Android System Recovery:
<the options I described before, with their errors>
The above is in green font, the background is black with an HTC logo, at the very bottom is white font that says this:
Build: RAv1.2.1G
Sorry for not replying as fast as could. I mega-ly appreciate this so I'll try to be more vigilant.
I'll look around for other key combos to get some more info.
Click to expand...
Click to collapse
And I just did that! I pressed back + home and got a white background with three skateboarding androids with this text:
DREAM PVT 32B ENG S-OFF
HBOOT-1.33.2005 (DREA*****)
CPLD-4
RADIO-2.22.19.26I
Apr 20 2009, 15:30:43
CLEARSTORAGE
Delete all user data?
<ACTION> Yes
<POWER> No
--------
Well thats atleast one step we've bypassed. Stay with me here.
Alrighty so I know the Radio and SPL, and apparently they are up to date.
What next?
From your above post, it seems your SDcard is not being read by your phone. Not sure what the issue is there.
But, if you can get it recognized by the phone, try the following:
It seems you have ADB set up, you may be in luck.
Connect the USB cable in recovery and type these commands on cmd prompt in Windows:
adb shell
ums_enable
This should mount your phone to your PC.
You can now move in necessary files to save your phone.
I suggest doing a FULL WIPE, then reflashing a ROM such as CM 4.2.14.1 (latest build).
If that doesn't work, you may have to start over by flashing DREAIMG.nbh (RC29), flashing latest radio, flashing SPL, DON'T REBOOT, then flashing rom RIGHT AFTER SPL.
Good luck, keep us updated.
Nearly There
Ok. So I got adb up and running.
I ran adb devices and it was blank so I followed part 2 of:
<do google search for "the unlockr hot to set up adb usb drivers for android devices>
After reinstalling drivers via USBDeview:
My Device Manager is now registering my phone as the Android Composite ADB Interface, but when I run adb devices it still has a blank list.
Keep in mind I am in recovery mode.
When I try and run adb shell, it errors with 'no device found' so I need to do this devices command successfully.
Does anybody know whats happening?
lachy95 said:
Ok. So I got adb up and running.
I ran adb devices and it was blank so I followed part 2 of:
<do google search for "the unlockr hot to set up adb usb drivers for android devices>
After reinstalling drivers via USBDeview:
My Device Manager is now registering my phone as the Android Composite ADB Interface, but when I run adb devices it still has a blank list.
Keep in mind I am in recovery mode.
When I try and run adb shell, it errors with 'no device found' so I need to do this devices command successfully.
Does anybody know whats happening?
Click to expand...
Click to collapse
Try running it while the Phone is on instead of recovery.
Say run terminal and post the output of:
cat /proc/cmdline
By the way you can still flash images using fastboot mode.
Its stuck
When you say 'on' do you mean on the T-Mobile Screen?
Thanks
Thanks again guys this is really good and I think we're getting close. OK. Here's an update as of right now:
My computer recognizes my phone in T-Mobile Logo, Fastboot (or thing with three skating Androids, Home and Back), and Recovery.
When I cd to my tools folder I can run adb commands but when I run 'adb devices' it shows:
List of devices attached
....
No serial number or anything. I've reinstalled the drivers.
When I do the command 'run terminal' it says 'run' is not recognized as an internal or external command blah blah
This is the same with 'cat /proc/cmdline'
I still can't run terminal with Alt+X in recovery mode (at least, nothing happens)
My phone cannot turn 'on'. It is stuck on the T-Mobile Screen.
What should I do?
lachy95 said:
When you say 'on' do you mean on the T-Mobile Screen?
Click to expand...
Click to collapse
Normal boot.
That doesn't work.
How can I see it in adb devices?
Argh!
Any ideas just throw them out there.
Have you tried another sdcard? That's the first thing I would try if the phone is complaining about not being able to read it.
Check ur drivers.
sounds like u need to update them.
Try the attachment
Technochris1 said:
Check ur drivers.
sounds like u need to update them.
Try the attachment
Click to expand...
Click to collapse
It works!
Sweet Technochris1, Sweet, sweet person. Thou hath skills and prowess!
I uninstalled the drivers then installed yours. Now adb devices is functioning and sees my device! Now to mount, transfer and fix! I'm indebted to you greatly, for you fixed my phone and everybody else on this thread! Thank you so much.
I'm writing this becuase i recently had trouble following other guides rooting my Bell and Virgin (canada) htc Legend with 2.1 on it (2.2 is out here yet)
First follow this guide
[HOWTO] DOWNGRADE to 1.31 which you can then root for Legend 2.1
http://forum.xda-developers.com/showthread.php?t=725430
Click to expand...
Click to collapse
(By now your should have adb set up and your gold card)
If it dosnt downgrade and shows that it fails its okay just move on
After following downgrade guide and it failing install temp root
the best way is to get the apk is to go to this link in the android browser
goo.gl/TcP1o <---Download link to visionary apk
In the web browser open downloads and install the visionary apk
Then connect your phone to your computer open cmd.exe and via adb get root
with cmd.exe
go
Code:
cd c:\AndroidSDK\platform-tools\
for me adb is under platform tools, if you dont update the sdk it is under just tools
then
Code:
adb shell
a # should be at the bottom line, then type in
Code:
su
This gets you root, if it says denied run the visionary app and try again, then
Code:
/data/local/flash_image misc /data/local/misc1-2.img
Then for the actual root
Flash the Rooted ROM1. Download the Rooting Tools
Legend Rooting Tools:
2. Unzip them to the C: drive on your computer (so the file path is C:\r4-legend-root\)
3. Turn off your phone and turn it back on by holding down Back and Power until you see Fastboot come up on the screen. Push the Power button while highlighting Fastboot on the phone and Fastboot should show up in red now on the phone (if it doesn’t push Power again until it does).
4. Plug the phone in via USB cable to the computer.
5. Open the folder you extracted to the C drive and double click “step1-windows.bat” and wait for it to finish.
6. Once you see the menu on the phone come back up, navigate to BOOTLOADER and push power, then navigate to RECOVERY using the volume buttons to navigate and the power button to select and the phone should boot to the ! screen.
7. Now on the computer double click the “step2-windows.bat” file and wait for it to finish. (UPDATE 12.13.10 – You MUST have HTC Sync version 2.0.33 not a newer version for step2 to work. Please uninstall HTC Sync and download and install this version instead, unplug then plug your phone back in, then rerun step2-windows.bat).
8. Now you should see a custom recovery screen, using the optical trackpad navigate to Wipe and push on the trackpad to select it. Then navigate to Wipe data/factory reset and select that.
9. Once that is done, push volume down to go back to the main menu and select Flash zip from sdcard and select the rootedupdate.zip file and wait for it to flash. All done, you have root access and can use any root required app! Enjoy!
Click to expand...
Click to collapse
This worked when all else did not ill try and help others just ask
i got all this info from the links below and reading all the response's i hope this info helps some one
http://forum.xda-developers.com/showthread.php?t=725430
http://android.modaco.com/content/htc-legend-legend-modaco-com/323201/downgrading-from-froyo-ota/
http://theunlockr.com/2010/06/07/how-to-root-the-htc-legend/
This deserves a sticky
mike998 said:
This deserves a sticky
Click to expand...
Click to collapse
What's wrong with the current sticky?
TheGrammarFreak said:
What's wrong with the current sticky?
Click to expand...
Click to collapse
i think maybe just the first post of the sticky needs to be updated to include something along these lines
Hello, Having some trouble here.
I got to the step where you run the Step1 batch file from windows. The cmd prompt comes up and says "erasing cache....." then sits. a few minutes later. i get
"FAILED <status read failed <unknown error>>
< Waiting for device>
During the erasing cache part, my phone had the boot menu on screen with no response from the controls. Also, a little green status bar was at 90%. (Second thought, that may be battery level. not sure. Confirm?)
Yeah, so, can't get step1 to work.
EDIT: ok. got step 1 and 2 to work. I basically just kept trying over and over and it went through.
So, i got to the custom boot menu. But i try to install update.zip from sd. But i get an error.
It says.
Installation aborted.
--wiping data...
formatting data...
formatting cache...
data wipe complete.
--install from sdcard
finding update package
opening update packing verifying update package.
E: failed to open /sdcard/update.
zip (No such file or directory)
E:signature verification failed
installation aborted.
So, wtf did i do wrong? now my phone is completely wiped, so.... now what?
sig ver
FourForty said:
Hello, Having some trouble here.
I got to the step where you run the Step1 batch file from windows. The cmd prompt comes up and says "erasing cache....." then sits. a few minutes later. i get
"FAILED <status read failed <unknown error>>
< Waiting for device>
During the erasing cache part, my phone had the boot menu on screen with no response from the controls. Also, a little green status bar was at 90%. (Second thought, that may be battery level. not sure. Confirm?)
Yeah, so, can't get step1 to work.
EDIT: ok. got step 1 and 2 to work. I basically just kept trying over and over and it went through.
So, i got to the custom boot menu. But i try to install update.zip from sd. But i get an error.
It says.
Installation aborted.
--wiping data...
formatting data...
formatting cache...
data wipe complete.
--install from sdcard
finding update package
opening update packing verifying update package.
E: failed to open /sdcard/update.
zip (No such file or directory)
E:signature verification failed
installation aborted.
So, wtf did i do wrong? now my phone is completely wiped, so.... now what?
Click to expand...
Click to collapse
okay when your in the recovery menu the one with green text and you go to flash the file theres an option to "toggle signature verification " or something along those lines
then when the verification is off flash it
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
saifbunni said:
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
Click to expand...
Click to collapse
You should install the old version of HTC Sync until you're rooted, have you done that?
saifbunni said:
k after i finally succeeded to downgrade (thinkin that the hard part is done!!!!), but i cant get past step 1, i keep gettin either "waiting for device", or htc black screen, or nothing happens. step 2 is even worse, all i get is "device not found", or loads of "FAILED". ive reinstalled htc sync 2, uninstalled htc drivers.
i think it seems that my computer is not recognising the phone as an android device, cos everytime i connect it, win7 seems to automatically install drivers (nd i cant stop that) and recognises it as HTC ANdroid Device (it appears as a "Disk Drive")..... tried to use htc sync, phone keeps searching nd it fails.. help please i cant use my phone
Click to expand...
Click to collapse
You need HTCsync 2 only for step2, to step1 you need the most updated HTCsync.
And you need step1, don't ignore that step just because it's not working.
Install the latest HTCsync, connect your phone to the computer, and put the phone on fastboot mode (should be written "fastboot usb" on phone)
now on the computer, in the folder of the rooting tools, write:
fastboot-windows.exe devices
Does it recognize your phone? (Should output details bout the phone including serial I think)
wel ive done step 1 now. i created a thread for this here..
http://forum.xda-developers.com/showthread.php?t=1095017
step 1 worked without htc sync, computer is good wen phone is in fastboot, it recognises it straight away, but wen i got into recovery is wher it messes up still even with htc sync. sum1 suggested another way, hav a look at the link, but im gettin signature verification failed or sumthin like that
help
saifbunni said:
wel ive done step 1 now. i created a thread for this here..
http://forum.xda-developers.com/showthread.php?t=1095017
step 1 worked without htc sync, computer is good wen phone is in fastboot, it recognises it straight away, but wen i got into recovery is wher it messes up still even with htc sync. sum1 suggested another way, hav a look at the link, but im gettin signature verification failed or sumthin like that
Click to expand...
Click to collapse
what hboot do you have on/ do you have android 2.2 on it?
Hey guys
I did a terrible mistake. Instead of just normally resetting the phone to factory settings in CWM after unlocking it, my finger slipped to the "format /system" option.
This happened before, but then I just sideloaded the rom and everything was ok. Oddly enough, this doesnt work anymore.
Whenever I want to push something to my phone using adb, I get the error that the device was not found and I cannot do anything to access the phone (when entering the command "adb devices" for example, no device shows up). I installed every driver I can think of, I installed all the packages in the sdk manager and now I dont know what to do.
I know that the debug mode is required, but since theres no OS anymore, I really ran out of ideas.
Please help me! :crying:
PS: additional information:
- HTC One m7 (unlocked)
- Clockwerkmod Recovery
- Windows 8
- Hasoon2000's all in one kit
EDIT: I found this site that recommends flashing via fastboot. (blog.syedgakbar.com/2013/02/01/android-installing-system-images-using-flashboot/)
where do I find these images?
Hi everybody I`d appreciate a lot if you provide me with any sort of help. The problem is following: while I was flashing a new rom my phone went out of power. After reboot I received a continuous loop of boot screen=>install screen=>reboot. In recovery mode when I try to choose the rom`s zip file I have no options. It says "No files found". I tried to mount sdcard and as far as I can see there was no failures. However, mounting emmc results in error. Equally, I tried to connect via Odin, but it does not recognize the device. Please,help me to get at least to the flashing point.
Keswick said:
Hi everybody I`d appreciate a lot if you provide me with any sort of help. The problem is following: while I was flashing a new rom my phone went out of power. After reboot I received a continuous loop of boot screen=>install screen=>reboot. In recovery mode when I try to choose the rom`s zip file I have no options. It says "No files found". I tried to mount sdcard and as far as I can see there was no failures. However, mounting emmc results in error. Equally, I tried to connect via Odin, but it does not recognize the device. Please,help me to get at least to the flashing point.
Click to expand...
Click to collapse
just mount phone under USB storage and copy the ROM files to the SD card that can be read by your phone and Flash the ROM from that location in CWM . To fix USB connections problems, read this
Check this out! You , YES! you are an " Android ". Not your phone but U.
Thank you for the quick answer. I tried to mount it under USB storage however my computer did not recognize the phone. Following your advice I started to check the connection. The main obstacle was indeed in that Odin was not able to recognize the device under Windows 8.1. After installation of Samsung USB Driver v.1.5.25.0-retail I managed to re-flash my device smoothly.
Keswick said:
Thank you for the quick answer. I tried to mount it under USB storage however my computer did not recognize the phone. Following your advice I started to check the connection. The main obstacle was indeed in that Odin was not able to recognize the device under Windows 8.1. After installation of Samsung USB Driver v.1.5.25.0-retail I managed to re-flash my device smoothly.
Click to expand...
Click to collapse
When your problem has been solved, EDIT your first post and remove [Q][Help] and add [Solved]
This will help others in their search and ensure that you don't need help anymore.
Check this out! You , YES! you are an " Android ". Not your phone but U.
I could not find anything similar using the search and google, so I hope I can find some help here.
I have the XT1900-7 device and I have to upgrade it to Android 9 as my banking app will stop working otherwise next week. I don't get the update offered via the Android settings, but the support confirmed that it is available.
I already tried to use the Lenovo Rescue and Smart Assistant as they recommended, but it says the device is not supported after downloading the firmware file.
I tried sideloading with the file I got from the assistant as well as with the one from https://motostockrom.com/motorola-moto-x4-xt1900
But when I enter recovery menu and select to sideload from ADB (same issue when trying with SD card), it always fails at the first step.
It prints "failed to unmount /" and then "failed to set up expected mounts for install".
Another frequent entries in the recovery log say "failed to open driver control: No such file or directory" and "[libfs_mgr]fs_mgr_read_fstab_dt(): failed to read fstab from dt".
But I could not figure out the reason for these or if they are related.
I wiped all data as well, but it made no difference.
Not directly related, but I mention it in case someone has a suggestion for that:
As the sideloading failed, I unlocked the bootloader (sideloading still does not work) and tried to install the firmware with fastboot.
But it seems that the communication is not stable or corrupted. I have to type most commands at least twice to receive a response other than "not found" or "remote: unknown command".
I read that this could be related to a bad USB cable. I already tried switching ports, but I don't have another USB cable available right now.
Could there be another reason for this issue?
Thanks for any help with this. I really don't want to buy a new phone again just because of that.