Database Develop

[Q] Is my Nook Bricked beyond all hope

I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.

This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam

His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699

Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!

Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.

It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!

I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?

I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.

jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699

Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????

One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.

With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?

I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App

You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App

72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690

Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.

It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App

RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App

I'm not sure what posts 13 thru 18 have to do with my problem???

Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App

[Q] How do you access clockwork mod on the nook?

How do you access clockwork recovery on the nook? Does the 3 button combo work? Is it different if you are running a rom off of the sd than if it's run directly off of the nook?

You have two options:
If you're booted up you can go to the Rom Manage app and select Reboot In Recovery Mode.
Or you can shut down by pressing power button and then on screen shut down button.
When your NC is completely off press and hold Power and 'n' button simultaneously for about 5 seconds.
It took me two hours of searching to find this answer. Hopefully this thread will come up in search results

Thank you, I was wondering this also.

neither method seems to work for me unfortunately. Both just end up booting normally.

Are you sure you installed CWM? From RomManager you need to select "Flash ClockworkMod Recovery". Also, I'm not sure how having an active system on an SD card will affect this process. Are you booting from eMMC or SD?

I don't mean to thread steal (hopefully i am just providing more useful information if my question/problem is answered).
When I boot into clockwork, i get can't mount SD card. Therefore can't install any themes as the themes are on the SD card, is there something I am doing wrong? I think I reformatted my SD card to be fat32 and not NTFS, does this matter? It seems to be able to read off the SD card when I am fully booted up.
TIA

easyski said:
I don't mean to thread steal (hopefully i am just providing more useful information if my question/problem is answered).
When I boot into clockwork, i get can't mount SD card. Therefore can't install any themes as the themes are on the SD card, is there something I am doing wrong? I think I reformatted my SD card to be fat32 and not NTFS, does this matter? It seems to be able to read off the SD card when I am fully booted up.
TIA
Click to expand...
Click to collapse
Different problem. Reformat in NTFS and try again.

k2snowboards88 said:
neither method seems to work for me unfortunately. Both just end up booting normally.
Click to expand...
Click to collapse
I was having the same issue after flashing the eMMC install for Honeycomb from the dev forums. I ended up going back to CM7 but when I tried to install the new Clockwork Recovery (3.0.1.0) using the manual method it wouldn't work and just kept booting strait to CM7.
To fix it I first restored the stock boot img from this thread.
http://forum.xda-developers.com/showthread.php?t=919353
After that I put in my bootable SD card and flashed the cwmr_3.0.1.0.zip from this thread.
http://forum.xda-developers.com/showthread.php?t=971197
That fixed my boot issues and got recovery working, after that I could flash the image I wanted using a non-SD recovery.
Before doing any of that it would probably be a good idea to toss in a bootable SD card and doing a backup.

Oh I borked this up good! little help?

So I was going to try and change roms. And I couldn't boot into recovery, so I made a recovery bootable sd card. Me in my glorious thinking decided I would just use it to install the internal recovery and my rom.
Once the sdcard booted into recovery I did a system/data/cache wipe. then installed clockworkmod. It succeeded, so I went to the rom I had on my card. It failed. I said I know, I'll power down, take the sdcard put cm on it and try again. wrong.
Now I can't boot into recovery on either an sdcard or without and turning on the nook regularly flashes loading and goes to the page that says android with the flashing underscore.
so as far as I can tell I have no operating system, because I wiped system. and I'm not sure what is up with my recovery.
I'm looking at this page,
http://forum.xda-developers.com/showthread.php?t=914690
but I'm not sure how I would flash the zip if I can't boot into anything?
any ideas would be appreciated

constellanation said:
So I was going to try and change roms. And I couldn't boot into recovery, so I made a recovery bootable sd card. Me in my glorious thinking decided I would just use it to install the internal recovery and my rom.
Once the sdcard booted into recovery I did a system/data/cache wipe. then installed clockworkmod. It succeeded, so I went to the rom I had on my card. It failed. I said I know, I'll power down, take the sdcard put cm on it and try again. wrong.
Now I can't boot into recovery on either an sdcard or without and turning on the nook regularly flashes loading and goes to the page that says android with the flashing underscore.
so as far as I can tell I have no operating system, because I wiped system. and I'm not sure what is up with my recovery.
I'm looking at this page,
http://forum.xda-developers.com/showthread.php?t=914690
but I'm not sure how I would flash the zip if I can't boot into anything?
any ideas would be appreciated
Click to expand...
Click to collapse
Try Re-burning the Newest CWR to to your SD card, maybe your SD card has gotten corrupted
CWR 3.0.1.0 http://forum.xda-developers.com/showthread.php?t=971197
Also http://forum.xda-developers.com/showthread.php?t=949699

trying out your steps and I think I've realized the problem... but I can't figure out why it's doing what it's doing. I can't seem to correctly use dd to burn the image to the sdcard anymore... it worked the first 3 times I did with no problem. But now it's not working...
is there a certain format these cards need to be in? fat32, ext2/3/4?

constellanation said:
trying out your steps and I think I've realized the problem... but I can't figure out why it's doing what it's doing. I can't seem to correctly use dd to burn the image to the sdcard anymore... it worked the first 3 times I did with no problem. But now it's not working...
is there a certain format these cards need to be in? fat32, ext2/3/4?
Click to expand...
Click to collapse
what OS are you using? Linux? I don't know anything DD in Linux sorry.
I have been using Windows and Win32DiskImager
I think they are Fat32 images.
Maybe try Reseting the computer, and trying again.

Yeah it keeps writing phantom images to the directory that is supposed to be where my sdcard is located... and not on to the sdcard itself...
and yeah it's linux... I'm baffled... I think I will try a restart not only on my computer but on my day...
if any linux users have any advice on writing this image I'd appreciate... goodnight all I will try again tomorrow at some point
thanks for the help though!

constellanation said:
Yeah it keeps writing phantom images to the directory that is supposed to be where my sdcard is located... and not on to the sdcard itself...
and yeah it's linux... I'm baffled... I think I will try a restart not only on my computer but on my day...
if any linux users have any advice on writing this image I'd appreciate... goodnight all I will try again tomorrow at some point
thanks for the help though!
Click to expand...
Click to collapse
Make sure your Burning to the device directory and not the mount folder. (ie: /dev/sdc not /media/cardstick )
____________________________________________________
Sent from Nookie Froyo using Tapatalk

well that was what I was doing wrong writing the image. However the nook still won't boot from them...
It just goes to the dark screen that says android in light blue with a blinking cursor at the bottom left of the screen...

constellanation said:
well that was what I was doing wrong writing the image. However the nook still won't boot from them...
It just goes to the dark screen that says android in light blue with a blinking cursor at the bottom left of the screen...
Click to expand...
Click to collapse
well at least you boot Partition is intact, but sounds like you have no system or data partition.
Its very odd that the Nook wont boot off the SD card, it should look for that first in the boot Process, all i can think of is that your SD card is still not right.

I tried two different cards. The clockwork 4gb version and the 8gb version. Both looked right with the appropriate files. :/
So I don't think, though it's still a possibility, that it's the card itself

I think in the morning I'll try this http://forum.xda-developers.com/showthread.php?t=922870]
In combination with this http://forum.xda-developers.com/showpost.php?p=11535969&postcount=151
Specifically the reverting to aosp part. To tired to deal with cli right now.
Edit: if that fails I may try this http://forum.xda-developers.com/showthread.php?t=914690

therealguppy said:
Try Re-burning the Newest CWR to to your SD card, maybe your SD card has gotten corrupted
CWR 3.0.1.0 http://forum.xda-developers.com/showthread.php?t=971197
Also http://forum.xda-developers.com/showthread.php?t=949699
Click to expand...
Click to collapse
Silly question as I haven't been able to find the info as of yet. Could you explain how we can go about burning the newest CWR ( ie 3.0.1.0 ) so we have a bootable sdcard running it ( 3.0.1.0) instead of the older 3.0.0.6 that all the burnable imgs are currently. I looked threw the thread and I don't see any instructions or talk about how to update a bootable sdcard. It only seems to discuss updating the recovery of the eMMC using ADB or the *.zip file that is linked. Any input,advice, or link would be greatly appreciated. Peace

I must say that the monster rootpack is amazing, and I am up and running
seriously when all else fails (or if you just want to cut down to it) http://forum.xda-developers.com/showthread.php?t=922870
anyway problem solved, running cm7 rc1 right now!

[Q] Nook Color Won't Boot-Been trying stuff

I have a Nook Color that was running the Cyanogenmod nightlies. After shutting it down, it would not boot again.
Since it still boots into recovery, I tried reflashing cyanogenmod, a recovery zipp that was supposed to restore the boot partition, dding boot.img and system.img to the internal memory, a total wipe of every partition, flashing with the latest version of clockwork, along with .7, the stuff mentioned here http://forum.xda-developers.com/showthread.php?t=949699, and flashing "nook color return to stock".
Although all flashes completed successfully, the device still won't boot without the sd card. Is there a method I'm missing?

Been in the same boat myself as well as many others. I found that to get it to boot correctly again do this. Use this link (http://forum.xda-developers.com/showthread.php?t=914690) and downlaod the "Remove CWR" file, you'll also want to download the repartition-boot-with-stock.zip which is the last link in the OP right under the Remove CWR link. Once you download each file copy them to a bootable sdcard. Then pop the bootable card into the nook and power it up to into CWR off the sdcard. After that install the Remove CWR zip first, then follow up by installing the repartition-boot-with-stock.zip. Once all is said and done power the Nook off by holding the power button in. take the sdcard out and then power it on. Odds are it will get stuck again but you should be stuck on the N screen. If so power it off and then put your bootable sdcard back in the device so you can start fresh reinstalling CM7 & gapps.

If you repartition boot, cwr will be removed in the process. No need for the second file..
Sent from my HTC Desire using XDA App

samuelhalff said:
If you repartition boot, cwr will be removed in the process. No need for the second file..
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
In theory it should and you are totally right on but I've personally seen it where even after repartitioning the boot it still will not boot correctly for whatever reason. That said personally I've found it just as easy to take the extra step to make sure it gets cleared up as it takes a matter of a couple extra seconds to do it.

Thanks, I'll try that.

Followed instructions exactly, but the thing still won't boot. I must have F'd up my /boot partition pretty badly.
Edit: Wiped every single partition and cache, then flashed, now it works. Thanks guys

I am having this same problem and have a question about the options to fix it. I have CM7 stable on my NC and it worked untill I formatted the SD card and rebooted.. now it just gets stuck at "touch the future of reading" screen.
Is it possible to remove CWM without harming the CM7 install? and still be able to boot to CM7?

need help, nook is all messed up--solved

I use the SD card method to have the nook boot into CM7 and when the SD card is pulled, the nook would be stock to be used by my kids. But I think I messed things up and can't restore. Here is what I have done:
1- I tried to update the stock version to 1.3 manually from B&N website but soon realized I could not. It seems like when in CM7, I had tried to flash CWM recovery (which was not needed and is pretty buggy in SD card method for nook). Now the recovery in emmc appears to be CWM.
2-for some stupid reason when I got into CMM recovery, I formatted boot, system,data and cache (not sure if I did boot also or not). My thinking was to flash a stock image and be fixed. But I am now stuck.
Is there a way to go back to stock on the nook? I am still able to boot into SD card and CM7 nightly. Oh ya, I use Linux Ubuntu not windows. TIA

Sounds like you should get the system back to stock before proceeding any further.
Follow the instruction here: http://www.nookdevs.com/NookColor_UnRooting

The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?

I did kind of the same thing once. I made an Sd card image with CWM on another sd card -- basically as if you are going to install CM7 to emmc. However, once you get to the point where you would flash Cm7, use the stock zip ROM. It will install that to emmc so it will be back to normal. You should then be good to go.

loveubuntu said:
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
Click to expand...
Click to collapse
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.

jerrykur said:
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
Click to expand...
Click to collapse
when I follow the instruction, I am not given the factory reset option. I am stuck at the n screen. It flashed the read forever but then stuck at the n screen. Do I have to wait longer than 5 minutes?

None of this is mine, I owe it ALL to the threads mentioned below.
So as in many posts on XDA say, it's almost impossible to brick the Nook. What a great device. I had to format my SD card to use it to "un-brick" my nook but it was done. I Mainly used the info here http://forum.xda-developers.com/showthread.php?t=949699
Burnt a bootable CWM image onto my SD card. It took a while doing it with dd in Linux. I'm sure it's the same in Windows or Mac. It took about 20-30 minutes. It also took a while to unzip/extract the img file from the downloaded file. Be patient
Then used the CWM recovery remover file from http://forum.xda-developers.com/showthread.php?t=914690 to remove my CWM recovery and used the 1.0.1 file from same thread to flash the stock image onto the nook.
Once the SD card is ready, just drop those files in the root of the sd card. It should have 4 other files in it to boot into CWM recovery from the sd card and let you use the menus to flash those two zip files. It took a while but it's all in those threads. Thanks to the members. Now lets see if I can go up to 1.3 and then root it again.
you also need to do this
http://forum.xda-developers.com/showthread.php?t=1094371
and here is the ver 1.2 stock flashable with an clockwork bootable sd card
http://forum.xda-developers.com/showthread.php?t=1050520