Sorry... title should read XDA IIs
I recently bought an O2 Xda IIs (Win 2003) - 1.40.00 WWE and loved it so much that I decided to buy another from Ebay. This one was upgraded to WM5 5.03.02 WWE but it's not very stable and quite slow. Also the camera and bluetooth don't seem to work.
I'd like to downgrade to 2003, but don't have any success.
I've done the full hard reset and tried to re-flash the ROM but the RUU program doesn't show me the ROM version.
I seem to be going around in circles from post to post, and I can't seem to get past this stage. I can sync via ActiveSync and that seems fine - i.e. if I add Google to Mobile Favourites on my laptop, they come up on the Mobile Favourites on the Xda.
I've downloaded Chef_Tony 02 WM2003 UK and I'm using the noID updater. The instructions that I'm using are d-two's PDF file.
When I run the MaUpgradeUT_noID program, it doesn't show me the CE ROM version that I should be updating to. I've got the ms_.nbf, nk.nbf and radio_.nbf files in the same folder and I'm sure that it's what's needed.
When I click Upgrade, there's a pause about 15 seconds and then it says congratulations, and asks for a reset. In this time, nothing has changed on the Xda screen and I didn't get the progress bar.
I've done the mtty bit, and tried various combinations of reset, disabling the two processes in task manager and so on. Incidentally, d-two's instructions don't mention disabling the processes.
Can anyone shed any further light on this. I'd like to get this Xda running for my wife...
Thanks,
Ivan
Try the WM2003 SE that compiled by d-two, you can get the address in the file that I attach (sorry for this, but I haven't allowed to post links yet), it works fine for me. But if I can give an advice, why you don't try WM6.1 and WM6.5 that cooked by d-two too?? It was great!!!
Related
I've currently followed the instructions for the 1.31 with Arabic and different radio file because that's exactly same original hardware as my UK O2 XDA IIs.
But I've ran the BaUpgradeUt.exe and it confirmed the version changes, but now it doesn't seem to be doing much.
Phone has gone dark and simply says:
USB
v2.06
And the Upgrade program says: Checking the information on the device please wait.
And a warning not to disconnect it.
Erm this is my first flashing so just a little worried I've toasted my new device :-( I can appreciate it takes a while to transfer 30Mb odd over USB, but it hasn't done anything for almost 10 minutes now :-(
Help please? :-(
Thanks!
And I think I've solved my own problem. Everything you need really is in this forum... somewhere
For everyone else who stumbles over this looking for same thing. I simply took battery out for 30 mins (to flatten backup I assume) and then hard reset it (comes up with serial v2.06 at point you unplug from cradle) and then restarted PC and re-ran update program and SEEMS to be going okay at the moment!
Hi,
I have the O2 XDA IIs just like you too but still with the original ROM. You can get a copy of the original ROM from O2 now off their myxda uk site if there are any problems.
Have you got a step by step guide of how you upgraded to 1.31?
Cheers
Hi,
Take a look at the Wiki site. It has all the info on there. I'm now running a 1.31 main ROM (was originally 1.12), a 1.06.02 radio (originally 1.02 I think) and an extended ROM that is hacked up from Orange's (the network I'm actually on!) as well as my own choice of programs etc. Wiki has all the info! It rocks! Thanks to the guys (and gals?) who write it!
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
Seems to have appeared as the FINAL offical release from t-mobile for uk users.
I've not tried it yet but the number does seem to suggest it is a slightly lower version than the Dutch one
EDIT MDAIIIUser
Added to wiki
no surprises
build of 2003se identical to Dutch rom previously released:
version 4.21.1088 (build 15159.2.6.4)
Extended rom just hasth changed regional settings (english UK default)
Added to wiki
Still a lot of echo.
Can't pair my Motorola HS820, BA sees the HS820, but error on connecting.
Anyone a fix for the echo and for the BT problem?
Use 1.40 before, was less a problem compaired to 1.42
Please help.
Regards,
Max
Report Back - T-Mobile Rom.. One week or so on..
Hi All,
Wanted to feedback my impressions of the new 1.42 T-Mobile UK Spec Rom..
Well, it's been interesting.. I now have (or have had) most of the faults that everyone else is experiencing.. I never used to get them at all with the i-mate 1.40 Rom or the NL 1.42 T-Mobile Rom.. I have listed the bugs below..
1 - One Hard-reset when inserted into GPS Car holder
2 - Several occasions where I've "lost" the Storage Card (when serching for it on the device AND through Active Sync)
3 - Interesting situation where I've started TomTom5 and I've suddenly had to go through the set-up process again only to be told that there's no maps (Can only attribute this to an occasion where the Storage Card is not seen by the PPC - See above).. Solved by remove Programs, soft-reset then re-install off SD Card.. (quite annoying as I was lost at the time!)
4 - Occasional failure for BT Headset being recognised on an in-coming call (I use the Logi-Tech Pro).. Solved by Soft-reset..
5 - Sometimes, after soft-reset, get a low performance from the Device.. ie, after soft-reset and switching to phone where it takes a few seconds to "build" the phone screen..
Strange but as I mentioned above, I don't recall getting these bugs on the 1.42 NL Rom or the i-mate 1.40 Rom.. I might try a hard re-set on Monday then re-install my tomTom, etc to see if it carries on.. If it does, I MIGHT switch back to the either :shock:
That's it really.. I have had the early T-Mobile 1.06, the i-mate 1.40, T-Mobile NL 1.42 and T-Mobile GB 1.42 and finally the WM5 Roms and from what I've seen, I place them in this order of preference..
1 - i-Mate 1.40
2 - T-Mobile NL 1.42
3 - T-Mobile GB 1.42
4 - WM5
5 - T-Mobile GB 1.06
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
dazed and confused
sorry if I'm being simple but ....
I though this was the last offical rom
http://www.iris-global.com/t_mobile_download/download_manager_mda_com.html
MA_TMUK_11300_128_11200_SHIP.exe
Rather than
http://t-mobile.iris-global.com/files/BA_TMUK_14200_112_11300_Ship.exe
How did you maanage to find the link?
What is the diference between the builds - How can I find a change log?
What is the BA / MA?
:?:
See here:
http://forum.xda-developers.com/viewtopic.php?t=31360
No difference in UK and NL Rom..?
[email protected] said:
Hi,
Updated to the dutch ROM, is better then this UK ROM.
Version number is also newer.
Regards,
Max
Click to expand...
Click to collapse
Hi Max,
The Rom is exactly the same and the only difference is the changes in the extROM that makes it either UK or NL Spec (ie, MMS settings, etc)
Hi Starfish - Perhaps you need to look at this for the answers to your other questions:
http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
Oh, and BA is "Blue Angel" and MA is the "Magician" HTC Names for the devices..
Sorry I did'nt read close enough Magican vs Blue angel
starfish_001 said:
Sorry I did'nt read close enough Magican vs Blue angel
Click to expand...
Click to collapse
That's ok.. We all have to start somewhere.. 8)
Now, I'm not too sure how far advanced you are in Upgrading, etc but before you do, please remember the following that I put on another post on here..
MrPhilly said:
General Tips to you (and others)..
If you do want to update or upgrade then make sure you read everything through first.. Make sure you're happy in doing it.. Perhaps use the search function to read through others comments.. I would also recommend reading others comments about trying to downgrade from WM5 to WM2003SE to see what others have encountered
You will not believe the amount of people who end up posting questions when they've not followed the instructions from Wiki that I've pasted for you here..
Finally, if you are stuck, use the search command and describe your problem in the Keywords section, select Blue Angel from the Category and read through the posts relating to it before posting questions..
Hope this helps..?
Cheers!
Click to expand...
Click to collapse
How can I upgrade to a stable rom
I have tried the TMobile NL and UK version both give the Country ID eror with the extra numbers 17-17-38-38-38
How can I safely upgrade to the 1.42 version (I have read the Getting Started With The Blue Angel) .
Is that the way to go?
"I get the password error on the xda3nbftool for the nbf segment"
I would like to get rid of all the phonesound failure and systemhangs with TomTom5.10
My Qtek9090
PH20B 0 B
WWE E
DANGA001
1.40.00 0 0
1.40.556
1.13.00 13.00
Upgraded to this from the last O2 update (my BA is an O2 Xda IIs), and while for the most part it works fine, now if the device turns the screen off for power-save while out and about, the GPRS connection drops. I know the hardware is capable of keeping the GPRS connection alive in such a situation because, well, it didn't drop it under the previous two O2 ROMs I ran.
Anyone else had this problem, or know a fix? Hopefully it's something simple that I've overlooked...
I'm getting better Bluetooth support with this (whether through actual improvements in the stack or through sheer dumb luck), so I'd prefer not to downgrade if I can avoid it.
Upgrade for NON OEM/Carrier Blue Angel
I have an unlocked OEM i-mate PDA2K. Because of this I am unable to install the T-Mobile upgrade to 1.42.
Is there a way to get around this?
I tried using the MaUpgradeUt_noID.exe, but I was unsuccessful.
Any ideas on how to upgrade a non-T-mobile branded blue angel?
Thanks
problems upgrading a non-t-mobile branded PD2K
BELOW IS THE SCREENSHOT OF THE ERROR
Did you make sure you had the MAUpdate file in the same directory as the actual upgrade had been uncompressed into? Since it's missing the RUU.DLL file that is part of that package.
Basically, get the files out of the real upgrade, then copy the MAUpdate into that directory, then run it instead.
I can not unzip or unpackaged the shipped OS
When I double click on the file, it runs the file, when you right-click and select extract, it gives you an error.
How do you unpackage the ship package?
Me, I used WinZip, I think it was.
Can not unrar or unzip setup files from exe package
the instructions states:
Unrar or unzip all files in exe or rar into a new folder. I get an error when I do that.
I also noticed that the instructions states:
First Method (Quick/Easy) (TYPE II), but there is another method Second Method (Slower/Harder) (TYPE I)
I am going to give that a try
O2 XDA IIs
Hi from Greece,
A friend bring me to Greece from Singapore one O2 XDA IIs but it has a old versions:
rom 1.31.00 wwe
rom date: 12/13/04
radio v:1.02.00
protocol version: 1337.32
ExtROM version: 1.31.920 wwe
sorry but I'm newbie here, can you tell me what (and where can i find) I must download in order to update to the latest versions.
I allready download the latest version from O2.UK for O2-XDA IIS but I do not want to lock my device to any network and that's the reason who asked you and I do not install this I allready download.
I allready see http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades but I don t now what I must download.
thk u
Hey guys, before anything please let me thank you for this amazing site. You have made a complete n00b to a power-user in 2 days flat. Please do allow me to tell you my story. 2 Days ago I got this thing called O2 XDA IIs (HTC Blueangel) and I got it for around 300US$ (Unlocked/New) was not so fond of Windows devices so intended to sell it off asap and get some other phone, was just doing a little R&D on the net to see what all is available for this thing. When I came across to your site, here's when I got so intregued by the capabilities of this thing.
First I intalled the latest ROM for my device, after getting little confidence I installed WM5 with my fingers crossed. Its all done now but have a few things to ask you guys.
1. When you mentioned about the EXTROM you said that you'll have to copy the files on the StorageCard\ExtRom when all I did was copy nk.nbf into the folder called WM5_Pack_V3 and ran the installer. I did run the batch file to get the oper_code from the DeviceData file. It was all done, I was really scared but now am worried did I do the right thing?
The Device Information TAB shows
ROM Version : 5.03.02WWE
ROM Date : 03/02/05
Radio Version : 1.12.00
Protocol Ver : 1337.42
ExtRom Ver : TuMa v1.3
2. It took me long enough to install this what all tweaks should I do to it so that it stays at the maximum bug-free current stage. (Hope you get me)
3. I need the starting screen to display something other then those scary 3 colored lines
Some things that I noticed after upgrading:
1. WM5 It's a little slow, but definately much better looking and show-off value.
2. I have a Wi-Fi enabled ADSL router at home by which I connect the O2 and other devices its working fine on.
Any help/suggestions/comments are welcome.
A brief intro for me would be have worked as a beta tester for many symbian application providers, was a complete S60 geek and am majorly into bikes & bike photography
Nothing said yet?
Im not sure I understand that whole Extrom deal, but what I can say is that the files that were in the extrom folder inside the upgrade pack must be put in the storage card in the same folder, but that is only if you want MMS and have a camera, if not, then there is nothing to do, unless you edit the Cfg.txt to load all your apps and settings after a hard reset. I guess that if you are able to use the device, you did everything ok as far as the flashing goes. it is a little slow, but its come a long way from the first versions, those were slow as hell, thanks to Mamaich and Tuatara and everyone else this version is running great!
as for the 3 color bar start up screen, there is nothing you can do about it...
Yeah I really forgot to thank Mamaich and Tuatara for their awesome work, now I am really scared as I dont like the slow response and am unable to downgrade. ActiveSync shuts down whenever I try to run the MaUpgradenoID.exe file activesync stops and it is giving errors in connecting, gets DC frequently. And moreover the Manufacturer supplied upgrade is also not working it gives a CountryCode error. Am really confused and scared now what to do?
Well I did not get any help but with loads of tinkering I got the thing done, I wanted to know why was WM5 so slow, otherwise the interface is loads better then the current CE I am using.
I have the Cingular version SX66 Blue Angel. I was able to update it without any problems. Usually speed is very different with those who flush the registry and with those who don't. Make sure you flush your registry after you completed the update.
Mine is faster and way more stable than the other version I had on it. Remember to follow all instructions exactly. if there is a link you need to check and make sure you do the format, change the ram size on the device, then upgrade.
There are no instructions on how to flush the registry can you enlighten me on this?
manav said:
There are no instructions on how to flush the registry can you enlighten me on this?
Click to expand...
Click to collapse
During the flashing process, the wiki instructs the user to do a hard reset
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_HardReset
You should answer NO, YES, YES to the boot questions.
Hmm yeah, I did do that. And just am in the process of downgrading from the buggy WM5. It doesn't work out for me.
and THAT'S where I got problems!
in the manual, it says I have to download my latest favorite ROM version, and FROM that file i should copy the nk.nbf the "DOWNGRADE TO WM2003SE" folder..and that's what seems impossible to me, since the Rom-update i downloaded is an .exe application, and not a .zip or .rar archive..
so how should i get the nk.nbf file out of the Rom-update .exe file..?
help
well some were in the same documentaion it should also say use rar or zip to unpack it (being the exe file).
Pls spend some time in wiki you might find some other answers
yeah i had tried that already back then butthat didn't work either..when i try that it still just starts running the program.. :?
Try these instructions with your exe file:
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
hi all, i have been looking and asking questions all mornin on how to upgrade to wm5, so i downloaded needed files, hard reset my xdaIIs and run rom, with the baupgrade rom i get error 103 and with the maupgrade it runs for 20 secounds or so, says its comlete and to do another hard reset, and when i have done this nothin is different, please tell me where i am going wrong,
My device info is
rom version 1.40.00 WWE
protocol version 1337.42
Extrom 1.40.237 WWE
I take it my xda is still standard?
Thanks
Alan
wiki
pls read wiki
you need to formate the device
camera+recoder button thing
i did exactly that and had usb come up on screen but still no joy.
Cheers
hey
regarding the the maupgradeutnoid.exe, when your using it for the vry first time, you have to disable activesync first, put your device into bottloader mode, and put it ine the cradle... you could here a sound, wait till the device would be recognize and wait till a popup message telling you that the new device installed is ready to use and that's the time where you run the maupgradeutnoid.exe otherwise you'll keep on just getting that message that the upgarde is finished, well actually nothing has happened.
since, its your first time attempt of upgrading to wm5, you can use baupgrade.exe but be sure you have set the corect operator for your device. to know what is your operator info, just transfer the getdeviceinfo.exe to your device and run it, this .exe will generate devicedata.txt found in the windows directory of your device. tranfer it to your pc and read it from there, in my case I have an imate, my operator is CDL_01, remember this coz you will neede this when your upgrading to wm5.
in any rom that you can download in this site, there is an included bat file, setoperator.bat, and enter you operator info, after that your ready to run baupgradeut.exe with no problem... read the wiki for better understanding.. alwaysssssssssss read..............
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
ghumanfly said:
does anyone know why my imate kjame would give an error or Windows/autoconfig.exe doesnt exist.
i have tried a number or roms but the phone failed to upgrade to wm6. it then reverts back to the wm5 after encounting this error.
i have tried the CID unlock but there is no hope
can anyone please assist me urgently.
Click to expand...
Click to collapse
We need more information than this if you want help...
1. Wireless Carrier?
2. IPL/SPL?
3. Roms tried?
4. How have you been trying to flash roms? What method of flashing?
5. What is your PC's operating system(your computer, not PPC)
EDIT>> Answer these questions for me and I will try my best to help you tomorrow some time. I live in Cental US so I might not get your messages until later tomorrow your time but I will respond in the morning tomorrow.
info
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
couldnt attach any of the files... not sure what was causing the problem
ghumanfly said:
forgive me if there is anything that i dont get correct....
1. Wireless Carrier?
i am assuming that this is the service provider and that is vodacome for me. it is a not the same as vodafone however they have a JV running
2. IPL/SPL?
IPL - 2.16.0001
SPL - 2.16.0001
rom version - 2.16.9.1
radio - 02.07.10
extROM - 2.16.9.101
OS - WM5
3. Roms tried?
i tried one of the ROMs that my IT team provided to me. i have attached the rom.
i also tried Octvio's rom (ROM_Wizard_OCTAIVOI_OS_1908_v4[1].8_PP6MB)
i also tried CB-AIRAF
4. How have you been trying to flash roms? What method of flashing?
here i loaded the EnableRapi cab file and ran it on my wizard. then i ran the lokiwiz.bat file on my machine. i didnt see any error there so i take it that it ran fine.
5. What is your PC's operating system(your computer, not PPC)
i am running XP SP2 on my notebook.
Click to expand...
Click to collapse
Ok I see that you have a G4. Lokiwiz is a waste of your time since you have a G4.
Here is what you need to do:
Because you have a G4, you can't just flash a rom because of the DOC chip.
There are 3 ways I know of to flash a G4.
1. Download shelltools - install enablerapi.cab and cert_spcs.cab and reboot your device. connect with activesync and place the nk.nbf file of the rom of your choice in the shelltools directory and run shelltools and follow the directions in the readme. If you do it correctly, you will end up successfully flashing your device.
Link: http://forum.xda-developers.com/showthread.php?t=293480
2. Download SoftSPL and place the nk.nbf file of your choice in the RUU folder included and run SoftSPL and it is fully automated. It will call the RUU and your device will be flashed in about 7 minutes.
Link: http://forum.xda-developers.com/showthread.php?t=329147
3. Use the HardSPL(CID UNLOCK) and unlock your device prior to flashing. This will allow you to just flash roms at your leisure with no problems whatsoever from now on BUT it is still in developement so use at your own risk.
LINKS: http://forum.xda-developers.com/showthread.php?t=332330
http://forum.xda-developers.com/showthread.php?t=332320
I hope this helps you. I personally have a G3 so this is not my area of expertise...
wm6
thanks alot me. it upgraded properly
i am trying get all add ons.
ghumanfly said:
thanks alot me. it upgraded properly
i am trying get all add ons.
Click to expand...
Click to collapse
No problem... Now you're at the fun part. Add ons!!
add ons
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
ghumanfly said:
when it comes to add ons,I was reading on the Rom Kitchen thread and and I couldn't see much more that could be added to the rom that Faris V5's nbf file.it seems to be one of thee most comprehensive files that I have come across. the only issue is that it runs a bit slow but it cool.I might just need to do some memory management.
other than that I would recommend the file.
do you have any other recommendations?
have u seen the article that microsoft wants xda dev... to remove all of its roms from the website?
Click to expand...
Click to collapse
I personally use the TNT.1437 TouchFlo and TNT.1437 Professional+HTC Home roms personally modified to have a 10MB page pool. They are quite fast and are almost 100% stable with only minor bugs that are barely noticible...
Here is a link to the 10MB Version of TNT.1437 Touchflo
http://www.megaupload.com/?d=TM2N1W2R
Here is a link to the 10MB Version of TNT.1437 Prof+HTC Home
http://www.megaupload.com/?d=RZFKY868
If you would like, I can speed up the performance of faria's rom also and then upload the new nk.nbf file for you to try. Just let me know.
speed
Yes, please.... speed it up for me. if there are any other applications (add ons) that you feel should be added to the nbf file then please add them.
i have already shared the nbf file with many guys at work. we would be grateful if you can assist.
one last thing, i noticed that there is a 3G icon under the comms manager. one of the guys said that we should not have any issues accessing 3G even if the phone didnt come with it. is it possible to use 3G on these phones?
cmd> prompt when i use mtty
--------------------------------------------------------------------------------
hi,
i;ve managed 2 screw up my wizard
everything was going well
i flased sucessfully 2 three different roms..
then i flased the tnt latest beta rom
i worked fine
i reflased the same rom by mistake as i wanted 2 flash a diferent rom
this is when the problem sarted..
the upgrade got stuck at 66%
i waited for 15 minutes..
then i disconnected the usb from the phone & since then the phones stuck in the bootloader..
i've used mty
this is where i'm in unknown teritory..
it gives me cmd> prompt
no USB prompt..
any sugestions??