Related
I recently switched to Buffed 2.1.2 which requires an ext4 partition if you want run a2sd. I partitioned my class 6 sdcard to ext4 in the following way.
1.Rebooted into recovery
2.Partitioned sdcard fat32
3. 32mb swap
4. 512mb partition
5. Upgrade ext2 to ext3
6. Then upgrade ext3 to ext4
Now my question is: Is this the correct way to partition to ext4? I'm assuming you need to upgrade specifically in this order? Or can you just skip upgrading from ext2 to ext3 and go right to the last step?
That's right. It's included in the original procedure here:
http://forum.xda-developers.com/showthread.php?t=715116#2
Thanks again c00ller! Not only did u bring wigdet locker to my attention but also helped me with this!!! I did search but was having no luck. Thanks!!
Sent from my Hero CDMA using XDA App
My pleasure. I learned a lot from xda so I like to return the favor whenever I can
when we partition our sd card to ext in cwm recovery is that ext2 or 3/4? if i use gparted insted of recovery to partition to ext4 is that ok?
Cwm does an ext3 partition, if ur using DTa2sd..it can be converted to ext4 by
su
a2sd convert-ext4
kandros said:
when we partition our sd card to ext in cwm recovery is that ext2 or 3/4? if i use gparted insted of recovery to partition to ext4 is that ok?
Click to expand...
Click to collapse
Yes, it is perfectly fine if you make one with gparted or mini tools... make sure you run this command in terminal before flashing a2sd...
mount | grep sd-ext
thanks to both
what mount | grep sd-ext exactly do?
aso my gparted already see my sdext partition ext4 if i partitioned it from recovery is that possible or an error?
That command checks if there exists an sd ext partition.
I don't know abt gparted but cwm formats the card and partitions it so it should not be a prob
I used minitools for partitioning
u can go for ext4 no harm in tht
if ur using mini tool make sure u keep all partitions as primary
also ext2/3/4 wont b detected on windows so dont panic if u dont see the partitions once done they r thr meant for ur phone nt windows
Without a2sd what is the exact command to convert partition to ext4 ? It can be very useful
..
Inviato dal mio GT-S5570 usando Tapatalk
roofrider said:
Cwm does an ext3 partition, if it using DTa2sd..it can be converted to ext4 by
su
a2sd convert-ext4
Click to expand...
Click to collapse
yeah, but "problem" is after a restore. If we convert partition in ext4 after restore, all data already in partition remain on ext3, only new data will be on ext4.
So it will be good that cwm could format always sdext in ext4
Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App
a.cid said:
Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
install a2sdgui
That is also pre-installed...after that???
And thank you for replying...
Sent from my GT-S5670 using XDA App
I have installed link2sd, which seems to be working fine...
When it asked me what partition type did I have, ext3 and 4 gave me a 'partition not found' error...
Ext2 is working fine...
Sent from my GT-S5670 using XDA App
a.cid said:
Okay, a question from me...
I have a galaxy fit s5670, running a custom rom that came with darktremor a2sd pre-installed...
I created a partition of 1024mb on my 16gb card, and have enabled swap...but the apps that I install are still going in the phone memory...
Can you please help me out???
Our devices are SIMILAR...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
I believe that you are taking about the cache that will use your internal memory even if you have a2sd enabled. THough it is not recommended to do so unless needed (i.e. your memory is very low) you can move dalvik cache to sd-ext from APP2SDGUI app or though this simple command
su
a2sd cachesd
It will move dalvik cache to sd-ext.
---------- Post added at 06:18 PM ---------- Previous post was at 06:12 PM ----------
a.cid said:
I have installed link2sd, which seems to be working fine...
When it asked me what partition type did I have, ext3 and 4 gave me a 'partition not found' error...
Ext2 is working fine...
Sent from my GT-S5670 using XDA App
Click to expand...
Click to collapse
Don't try anything eles.... Just install darktremor as said here http://yagyagaire.blogspot.com/2011/09/how-to-partition-sd-card-and-install.html
If possible format your sd-ext before installing darktermor app2sd. THen all you need to so is move dalvik to sd-ext as said above. And your internal memory will be totally empty. You can explorer /sd-ext/ folder using root explorer to see if a2sd is working properly.
After using link2sd for a day, I find that it is working, and it even allows u to specify which apps to move, and what all to move...
I did partition before using a2sd, and I understand the thing about the dalvik cache (moving which would make my device slower)...
Anyways, thanks for replying...
Sent from my GT-S5670 using XDA App
I am a noob. So, please can anyone explain what is the difference between ext2, ext3 and ext4 partition??? and which partition and application is best suitable for x8 as it has low internal memory and y???
too_cool_4_all said:
I am a noob. So, please can anyone explain what is the difference between ext2, ext3 and ext4 partition??? and which partition and application is best suitable for x8 as it has low internal memory and y???
Click to expand...
Click to collapse
Well, If I´m not wrong, ext2 is the primitive file system used on linux based system. ext3 and 4 are evolution of it. I´m using ext4 on my X8 without any problem, but it depends on kernel support.
You could get more information about file system here.
I´m using link2SD, besides the rom have App2SD native, but it wasn´t installing apps on sd-ext partition.
hi i recently got back to my stock rom GT-S5830_INU_S5830DDKQ8
my problem is that when i setup Link2sd an error message is displayed "mount script not created"
but when i use custom rom i an create the link2sd mount script
i have tried formatting my phone and the firmware also still faceing the same isse
can any1 help
i have just rooted my phone..
U have to partite your sd card before u run Link2Sd because link2sd doesnt create it,recommnd you to use Minitool Partition Wizard,very easy to use.
Sent from GALAXY Ace StockLite v7.1
Blackstard said:
U have to partite your sd card before u run Link2Sd because link2sd doesnt create it,recommnd you to use Minitool Partition Wizard,very easy to use.
Sent from GALAXY Ace StockLite v7.1
Click to expand...
Click to collapse
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please
imranaryan said:
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please
Click to expand...
Click to collapse
Mmm,really i dont know much about partition,check this tutorial;
http://forum.xda-developers.com/showthread.php?p=22075746
Sent from GALAXY Ace StockLite v7.1
imranaryan said:
i have 6 gb of fat32 and rest ext 4 partion
i made it through mini tool it works fine if i install custom rom but on stock rom it doesnt mount i think i ned some kind of script
can u guide me please
Click to expand...
Click to collapse
Try creating mount script in different format with link2sd. Ext2, ext3, fat32 one will work.
dxppxd said:
Try creating mount script in different format with link2sd. Ext2, ext3, fat32 one will work.
Click to expand...
Click to collapse
dide i tried all should i try installing DTapp2sd or flash cf-root
Did u assign your ext partition as 'primary' ?
Sent from my SK17i using xda app-developers app
imranaryan said:
dide i tried all should i try installing DTapp2sd or flash cf-root
Click to expand...
Click to collapse
Try manually editing the mount script.
I don't really remember where the link2sd mount script was created for stock roms without /init.d i think it was in a file called init.d at the root of the phone or system/ or system/etc.
Look it up, open it as text, locate the link2sd mount script.
The part where it says 'mount -t ext3 -o rw /dev/block' change 'ext3' to 'ext4' in all lines required, reboot. Check link2sd again to see if it worked.
Otherwise, enable the system/etc/init.d address by flashing cf-root or flash a custom rom.
imranaryan said:
hi i recently got back to my stock rom GT-S5830_INU_S5830DDKQ8
my problem is that when i setup Link2sd an error message is displayed "mount script not created"
but when i use custom rom i an create the link2sd mount script
i have tried formatting my phone and the firmware also still faceing the same isse
can any1 help
i have just rooted my phone..
Click to expand...
Click to collapse
format ur 2nd partition to fat16 or fat32 using gparted in linux..
stock rom kernel wont support ext formats..
i'm using fat32 second partition in stock rom for using link2sd..
Sent using xda premium
Are you sure about having a kernel with init.d support? Without it, script can't be mounted.
Sent from my GT-S5830 using xda app-developers app
abhibnl said:
Are you sure about having a kernel with init.d support? Without it, script can't be mounted.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Link2sd doesn't need /init.d, only root and partitioned sd to work.
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
Here you go: partition sd card
Was that so hard?
Next time do your homework!!
surendra13 said:
i jst rooted ma galaxy mini and installed ClockworkMod Recovery....now i want to flash rom new experience 4...before that i want to create sd partition but i am getting how to create sd partion for internal memory....i have 4 gb card..plss help..how to create sd partion on galaxy mini....????wch 1 s gd ??
Click to expand...
Click to collapse
try this software for partition SD Card.. use Ext2 or other on file system. MiniTool Partition Wizard Home Edition on the Web
search on CNET Download. maybe helpfully
you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!
shinnobi said:
you can search in youtube "Cách phân vùng ext2 thẻ nhớ" and follow it
or you install ClockworkMod recovery
chose Recovery => advanced => Partition SD card
if sdcard have
1G => 128mb
2G =>256mb
4g=>512mb
8g=>1G
and the partition 2 is swap
you can chose 128 or 256
reboot and check in pc
sr i can't post link ^^!
Click to expand...
Click to collapse
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?
Why so snotty?
thousandecibels said:
Here you go: partition sd card
Was that so hard?
Next time do your homework!!
Click to expand...
Click to collapse
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.
Iron_Dingo said:
I did google it myself and the link brought me here to read your snide response. I grow weary of the attitudes from people like you on this site.
Click to expand...
Click to collapse
oh boy... if this issue wasn't discussed before, he wouldn't post that... y'all really need to learn how to google properly...
odin0706 said:
I'm using rom TouchWiz_CM(Full TouchwizUI on CM7) , link: http://forum.xda-developers.com/showthread.php?t=1838305
Can i partition my sd card? and how to config my phone after that?
Click to expand...
Click to collapse
Yes,you can.After that you can use S2E or Link2SD to config SD-ext.I gess you flash New Experience rom 9.9.1,it already has S2E and very smooth.
it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks
giorss said:
it's strange:
I use last CWRM 6.0.2.7 for mini by dany
but when I partition SD
I get ext 3 partition
how to get an ext 4 partition?
thanks
Click to expand...
Click to collapse
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium
wait_close said:
U can use mini partition wizard to get ext4...
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
thanks... I tried to use it before and it creates a right ext 4 partition, but the rom (lenio rom v4) does not recognize the partition
I tried to label the partition "sd-ext" or with no label
but in both modes it does not work
incredible... I did the ext4 by minitool but the a2sd on lenio v4 does not recognize the sd-ext
update:
created ext4 by minitool partition wizard, but it seems that phone can't recognize it, coz the rom does not see the partition
is there something to do to make the phone create/see ext4 partitions?
tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???
Some possible problems,
giorss said:
tried the last attempt, with another CWM (5.0.2.8 touch ext)
I partitioned the SD, choosing ext4, but when I control, it's ext3
why that???
Click to expand...
Click to collapse
maybe the CWM failed to format it with ext4 file system,
or the ROM you use failed to identify ext4 file system, some guys told me there are ROMs that don't support the ex4 yet, you may want to read your ROM specification,
or somehow the ROM need additional script to read ext4 file system properly,
recently I've tried more than 10 times partitioning my SD cards, but most of it failed in attempts,
it won't be mounted as second partition, therefore I can't use Link 2 SD properly,
My ROM is PAC 22.1.0
I've tried partition tools: Minitool, CWM 5, AParted (SDCARD Partiton Tool) app, checked the partition table with Partition Table app, trying to mount second partiton manually with Android Terminal Emulator (using "mount" command), success using CWM.
I've tried ext2, ext3, ext4 partitions, but success only with FAT32 file system,
I think in the process I've delete some media in /system partition, maybe it creates problem since Link 2 SD need to modify some files in /system partition to mount the second partition,
I tried with Lenio vQuattro, partitioning with minitool, the sd-ext was correctly partitioned as ext4, but the phone did not saw the sd-ext. The rom is done to use only ext4.
So I went back to the most recent cm 10.1 (with ext3 and int2ext+) because this is my only phone and I need it to phone
Better use mini tool partition wizard..
You can choose the type of part,like ext2 ext3 or ext4..
Sent from my C2105 using xda app-developers app