Hello.
I have a little problem here and need some advise please. I bought my nook and it came with v1.1.0 firmware. I rooted my nook yesterday and installed rom manager and subsequently CWR. When I flashed cwr I used nook color not nook color old. When ever I tried to make a backup of the rom using cwr it would not mount /system.
I then reflashed cwr and tried nook color old and was able to perform a backup (or so I thought). After the backup was complete the phone rebooted into cwr and now I can get the nook to reboot. It always reboots back into cwr. I have tried turning the nook off and rebooting as well as restoring the nand backup that I just made but it still will only go back to the cwr section.
Please any help would be greatly appreciated. I do not have any other backups saved on my computer that I can go to. Would you suggest taking out my sd card and installing something on it trying something that way?
Thanks in advance for any assistance.
Best,
Anything anyone. I have tried just about all I know and still cant get it. I am able to burn the honeycomb image and boot up with the sd card but of course as soon as I remove it and restart the nook reboots straight into CWM recovery.
I have tried factory reset and all but still nothing. Any ideas please.
here you go - post 7 in this thread has the fix:
Thanks smitty. I just found it as you posted. Much appreciated though. Now I am back to stock and am stuck on the registration. Attempts to register with B&N for some reason wont go through. Gonna search it a bit to see if I can find a solution. Am sure someone else has had this problem.
dragongunner86 said:
Thanks smitty. I just found it as you posted. Much appreciated though. Now I am back to stock and am stuck on the registration. Attempts to register with B&N for some reason wont go through. Gonna search it a bit to see if I can find a solution. Am sure someone else has had this problem.
Click to expand...
Click to collapse
CWR Couldn't mount the system partition because there is a bug with the current CWR, you have to install the "kernel" manually. And don't use the "Old nook CRW" either.
Follow the directions found in this thread: http://forum.xda-developers.com/showthread.php?t=971197
To make it short, using ROM Manager, flash the latest CRW 3.0.1.0 for Nook Color. (No flash old one)
Then use ADB to push the kernel file to the boot partition and you are set.
Related
My NC wont boot no matter what I do. When I connect it to my pc (windows xp) I get an RNDIS ethernet gadget in the new hardware notifications. The nook was rooted but I did a hard reboot before finishing the setup because it wouldn't connect to my google account. The NC wont even show the "touch the future of reading screen" and I cant get adb to find the device. I rooted when I had freshly wiped everything and downgraded to 1.0.0 then I upgraded to 1.0.1 then I rooted. It worked fine until after the hard reset.
HELP!!!!
FIX!
I'm sorry for the double post, but I want to make this clearly visible when someone else has this problem.
So, all you have to do to get it to boot is try to put the device into recovery mode. It won't actually go into recovery mode though, it will just boot into the regular os.
Clockwork Mod Recovery
I can't go into recovery. I have Clockworkmod installed.
bumpity bump,
Im back to this issue seems my fix up there wasn't right. I did a FULL wipe on the nook (/system, /data) and then proceeded to update and root. after rooting I rebooted the nook with the autonooter sd card still inserted and then the device wouldnt boot. I tried removing the sd card and still no luck. adb doesn't find it but it is detected as a "RNDIS/Ethernet Gadget" under windows. Is there a way for me to boot the nook?\
EDIT:
got it to boot by mashing the power button and putting nookie froyo inside :/ im not sure why but thats probably how I got it last time too.
Clockwork...did the same thing
pndo1 said:
I can't go into recovery. I have Clockworkmod installed.
Click to expand...
Click to collapse
Folks,
I've done the same thing. I backed up with Clockwork to the SD. The Nook would only boot into Clockwork. So, I recovered and now the device will not power up at all. I fear that I have bricked a wonderful device that I spent alot of time on. It will not boot at all, will not respond to the power button at all and I don't know what to do. Does anyone have any suggestions or am I screwed?
FG.
I have the same problem with Motitas and it was updated to 1.1 recently. Please help.
the screen stops to nook icon only. does it mean i have a brick now ? PLEASE Help.
Please read my threa a few threads down from this one, titled "dummies guide to my nook wont boot." it explains everything.
I'm trying to unroot my NookColor, and I'm having quite a bit of trouble. I know I have to reflash the ROM to its original state, (by doing the eight failed boot attempts thing.) but it seems that in the process of doing that, ClockWorkMod gets in my way, and doesn't allow to Nook to do its thing (resetting on its own). I'm not sure of what I should do to resolve this issue.
I've tried with the SD card in, and out, and after scouring Google for hours, I relented and decided to post here.
Any help would be great.
Tom
Can you still boot to home screen? If so, you can try this:
http://forum.xda-developers.com/showpost.php?p=10543243&postcount=124
memorydead said:
I'm trying to unroot my NookColor, and I'm having quite a bit of trouble. I know I have to reflash the ROM to its original state, (by doing the eight failed boot attempts thing.) but it seems that in the process of doing that, ClockWorkMod gets in my way, and doesn't allow to Nook to do its thing (resetting on its own). I'm not sure of what I should do to resolve this issue.
I've tried with the SD card in, and out, and after scouring Google for hours, I relented and decided to post here.
Any help would be great.
Tom
Click to expand...
Click to collapse
By flashing the ClockWorkMod recovery it overwrites the stock recovery that would allow you to do the failed boot restore. You will get more answers and support if you read and post your question within the ClockWorkMod Recovery post, found HERE. There are a couple people in that post that are working on fixing this same problem as you. I have not read in detail, but I believe they are attempting to boot from the SD card with froyo, found HERE, to be able to attempt to flash back to stock.
I can confirm that booting from froyo allows you to mount internal boot partition (mmcblk0p1) and replace uRecRam to revert back to original recovery. Then proceed to system reset and then to factory reset. See clockwork recovery thread for further information.
Sam
Sent from my HTC Desire using XDA App
Ok so here's what happened.
I rooted my nook with autonooter 3.0.0, then I installed rom manager to install cwm. I installed the latest version of cwm and I tried to make a backup, it ended up in my nook only booting in cwm. So I found a cwm removal script and removed cwm. I booted my nook and opened rom manager and I decided to try an older version of cwm. I pressed make a backup in rom manager and it just went into a boot loop. I can't really turn off my nook, and I can't really turn it on. It just keeps going to "touch the future of reading", then turns off, then a couple of minutes later, goes back to "touch the future of reading". To make it clear, I do not have a backup.
So can anyone please assist me in fixing my nook? I'm in a dead end here.
Sounds like a boot loop try
Method one: Eight interrupted Boots
1. Power off the nook.
2. Tap the power button.
3. As soon as Welcome to the future of reading appears, hold the power button down to interrupt the boot process.
* If the boot animation does not appear, add 1 to your interrupted boot count.
* If the boot animation DOES appear, your interrupted boot count is reset to zero. Start over.
4. Repeat from step 2 until your failed boot count reaches 8. At this point, the nook will re-flash its /system partition. You will see the process on the right.
From Nook Devs
i went through this yesterday... i was told you can't brick a nook color so I restored it back to the original firmware...go to this website www.theunlockr.com then click the how to's then go to Android and look for Nook Color then look for how to restore to stock firmware and follow the instructions. they worked for me and I'm sure they will work for you also...Good Luck
Stupner said:
Method one: Eight interrupted Boots
1. Power off the nook.
2. Tap the power button.
3. As soon as Welcome to the future of reading appears, hold the power button down to interrupt the boot process.
* If the boot animation does not appear, add 1 to your interrupted boot count.
* If the boot animation DOES appear, your interrupted boot count is reset to zero. Start over.
4. Repeat from step 2 until your failed boot count reaches 8. At this point, the nook will re-flash its /system partition. You will see the process on the right.
From Nook Devs
Click to expand...
Click to collapse
Thing is, I can't power off or power on the nook.
I'm going to try and restore it to stock.
bennook said:
Ok so here's what happened.
I rooted my nook with autonooter 3.0.0, then I installed rom manager to install cwm. I installed the latest version of cwm and I tried to make a backup, it ended up in my nook only booting in cwm. So I found a cwm removal script and removed cwm. I booted my nook and opened rom manager and I decided to try an older version of cwm. I pressed make a backup in rom manager and it just went into a boot loop. I can't really turn off my nook, and I can't really turn it on. It just keeps going to "touch the future of reading", then turns off, then a couple of minutes later, goes back to "touch the future of reading". To make it clear, I do not have a backup.
So can anyone please assist me in fixing my nook? I'm in a dead end here.
Click to expand...
Click to collapse
You need to boot a stock image. Try this link http://www.androidtablets.net/forum...ll-clockwork-recovery-revert-stock-image.html
I'm So hoping someone will help me, I tried to root my device but it didn't work I couldnt get off the software so I installed 2gb clockwork 0.7 and nook complete restore 1.0.1 I followed all tutorials carefully, but when it comes to restore data it says no files found. Lost, I went ahead with the restore. It appeared to work except now I get a message flashing up that I cant read the screen just flashes and I think the partitions are lost too. I'm on the verge of tears. (im a girl dont judge) lol. And I'm lost with my expensive doorstop. PLEASE can anyone help me fix this as i'm at a loss (
No need to worry. The nice thing about the NC is that it will always boot from the SD card first. Sounds like you tried this...I suggest deleting everything you have (clockwork mod files, stock restore files etc) re-download everything and start fresh.
on your computer, format your uSD card, use Win32DiskImager to flash the clockwork mod boot image onto the uSD card and copy over the stock restore files. Place the uSD card into the NC and reboot. you should boot into clockwork mod and from there you can install the stock zip file from the uSD card.
GL!
Thanks,
I managed to get it working by resetting 8 times and booting a factory reset, but now it wont install any updayes and i'm stuck on the poo 1.01 software. I tried putting the official update on clockwork and booting from there but it says file bad with any version I use (screams in frustration)
This will fix your partitions
It was awhile ago, so I don't remember the exact steps, but the following file will fix everything...
nookie-froyo-0.6.8.custom.3.zip
When you unzip it you will get the following:
nookie-froyo-0.6.8.custom.3.img
You will need a program like 'WinImage' to write this image file to your SD Chip. Once done, boot your Nook with this chip and install Froyo. You probably don't want Froyo, but thats OK. This is just the first step... but it is key.... This install will 100% recreate and fix all your partitions.
Now you have two choices,
1. Find a stock nook image, and install it to your nook. I think it is 1.01
or
2. Find 'boot.img' and 'system.img' for the nook color. Write those to a bootable SD chip and install.
I am not sure if it was #1 or #2 that worked for me. Try #1 first. If it works, you will be able to start up your nook and register it with B and N. Then you can download their 1.2 update and install it as they instruct.
Good luck.
Follow this thread and you can get it back to original stock 1.0 or 1.01 and then do the updates as normal by waiting for OTA or sideloading them.
http://forum.xda-developers.com/showthread.php?t=931720
Thank you guys I've followed your steps and also looked around this site and im back on the latest stock software. I appreciate your help
Currently I am running nookie froyo 0.6.8 from the internal rom but I am having the following problem even when I had eclair with autonooter. When I am turning off my nook for the night, in the morning I am stuck at the "Touch the future..." screen and I can only boot through clockwork recovery and choose reboot. I think that it started when I flashed clockwork for the first time, but I am not sure. Any ideas?
aposva said:
Currently I am running nookie froyo 0.6.8 from the internal rom but I am having the following problem even when I had eclair with autonooter. When I am turning off my nook for the night, in the morning I am stuck at the "Touch the future..." screen and I can only boot through clockwork recovery and choose reboot. I think that it started when I flashed clockwork for the first time, but I am not sure. Any ideas?
Click to expand...
Click to collapse
I am searching the forums to find an answer to the same problem. I am running stock eclair that has been autonootered. I don't have clockwork installed. I can always boot with the sdcard to Honeycomb.. sometimes I can then reboot back into Eclair.
i had this one time, i try the 8 failed boot's to restore, didn't restore but rebooted to eclair!
arf, i'm having the same problem after all..
I had the same thing happen to me had to reformat cache if I wanted to boot into froyo,its a great system but that one problem did me in went back to stock and rooted the NC and plan on staying this way I just give up flash.Looked all over for fix or someone to explain why but never did get an answer sorry i couldnt help you but if i find answer will let you know
ok will look forward when i have time
At this point i can boot by pressing power + n for 30s, it boot to recovery, then i choose "reboot"
Yes that's right, this is the only way I can boot too (power but. + n).
when rebooted i lower setcpu to 1ghz max. it seems to help to boot ..
There are some really good unbricking//"my nook won't boot" sort of threads to be found in the developers section; but this one should be more than enough to fix your issues:
http://forum.xda-developers.com/showthread.php?t=949699
Additionally, I find that reflashing to a stock ROM or restoring a previous working backup image from CWM is the best way to go about it. Good luck!
I have the same problem too. Just remove the SD card on power on (reboot with software is OK)
Looking for better fix.
Taeseong said:
There are some really good unbricking//"my nook won't boot" sort of threads to be found in the developers section; but this one should be more than enough to fix your issues:
http://forum.xda-developers.com/showthread.php?t=949699
Additionally, I find that reflashing to a stock ROM or restoring a previous working backup image from CWM is the best way to go about it. Good luck!
Click to expand...
Click to collapse
Thx, I'll take a look at that if I ever have booting issues.
Think this is caused by the recovery image. Upgrade your recovery to the latest version 3.0.1.0 and see if that fixes it.
http://forum.xda-developers.com/showthread.php?t=971197
Going to try that today ..I just looked and i do have an older recovery file so maybe that is the problem will report back later on it.
Did the update, I will shut it off for the night and will check it in the morning.
Sent from my Nook Color
I also read CWR does not get along with 1.1..I just updated CWR and it still did the same thing what Im going to do now is clean restore then custom froyo then after setup go to market get rom manager install reboot into recovery and then install the remove crw with root file.
I downloaded the restore to stock zip file. Put it on the sd card. Then used the power and "n" to get to the butloader. Chose install from sd card and it installed. Back to operational!
Sorry if this is available here, but I am not having much luck with the instructions that I tried.
I have an auto-nootered 3.0 NC & want to return to stock in order to apply the 1.2.0 update. ( I run CM7 from SD when I want to really have fun) I tried the 8 fail boots & ended up in a boot loop to CWM recovery. What is my easiest (non-ADB) method to get this thing back to 1.1 stock? Again, I apologize if this is right in front of me, but most of the relative threads that I found are very old.
Thanks,
kev
I followed this thread to first remove CWR
http://forum.xda-developers.com/showthread.php?t=914690
followed by instructions here to restore to stock
http://nookdevs.com/Flash_back_to_clean_stock_ROM
and lastly to side load the 1.2 update.
Cheers
I had to restore to 1.1.0 after autonooter 3.0 by erase and dereg., then 8 starts; 1.2.0 then installed fine.
Jim
For those of us that do NOT have CWM (ClockWorkMod) recovery installed on eMMC, but do have CM7 installed to eMMC, can we use the 8 boot trick to reset our nooks to stock?
I'm running CM7 on my eMMC that I installed using the "CWM on SD" technique. My Nook stopped booting last night after midnight. Since I did not change anything with the OS and had rebooted a couple times earlier in the day, I'm ASSUMING that the 1.2 update came down automagically via wifi late last night, and was unable to complete install when rebooting. I did not see any prompts or input from the Nook during use or on reboot that would have indicated that and update had been received and/or applied.
Also, I was under the impression that the 8 boot reset pulls the software off a chip that has the OS "cooked" into. Is that correct? If not, wouldn't an eMMC install of CM7 remove any chance of the 8 boot reset being successful?
EDIT: just read the linked instructions above. I'll give that a shot tonight.
Anyone have any ideas here - I successfully removed CWM from my NC, then did the eight boot interrupts, and the stock software reload thing seemed to go okay. When I try to reset data by holding down power+n, nothing happens. It turns on, but then right back off. If I try to boot without holding n, it stalls on the "n" screen.
Any thoughts?
Flashed again with cwm up to 1.0.1 and I can't update to 1.2 or 1.1 via internal memory or sd. I changed file names and verified checksums and they are accurate and still no dice. WTF
edit:-----------
Weird. After an erase and deregister 1.1 and 1.2 finally went through. Something must have not been in the right state without that.
So if you're getting stuck do both methods in Part 2 of http://nookdevs.com/Flash_back_to_clean_stock_ROM
Same issue as others
Yeah... same issue here. Was running 1.0.1 rooted (no SD method). I did not have CWM Recovery installed in eMMC but did make an 8GB SD CWM Recovery.
So after the failed push update from B&N ... I now have the boot loop issue. My guess is their update failed because of some root thing I had in place. Not installing CWM Recovery to eMMC was my biggest issue because at least that would have blocked the automatic update from B&N.
At any rate... I've tried multiple time to recover and now find myself going back to unrooted stock just so I can get the B&N working again.
My wife is gonna kill me if I can't get this thing working again soon. The new magazine issue of "US" is about to come out. =)
Everybody calm down and just follow the Instructions here:
http://forum.xda-developers.com/showthread.php?t=931720
[HOW-TO] : Restore Nook Color back to stock EASILY!
That should fix your Nook no matter what you did to it.
____________________________________________________
Sent from NookColor CM7 using Tapatalk
=japzone;That should fix your Nook no matter what you did to it.
Click to expand...
Click to collapse
Yes, that works, but that restores the Nook back to 1.0.1. How does one then get it back to 1.1.0?
I followed the same procedure using the 1.1.0 firmware, but it refuses to work.
Anybody know how I can get back to 1.1.0?
Thanks.
assuming you have cwr, have you tried this?
http://forum.xda-developers.com/showthread.php?t=1050520
I'm about to try it now since I fail at ADB and rebooting apparently...
cameraz said:
Yes, that works, but that restores the Nook back to 1.0.1. How does one then get it back to 1.1.0?
I followed the same procedure using the 1.1.0 firmware, but it refuses to work.
Anybody know how I can get back to 1.1.0?
Thanks.
Click to expand...
Click to collapse
I tried this method and it worked perfectly!
http://forum.xda-developers.com/showthread.php?t=945838