Related
worked great for a while then kept force closeing anyone haveing problems??
It seems to be working fine for me. One thing is that when I set the clock to 128 or something, the status displayed on the widget still shows 527. The performance is significantly slowed so I assume it's doing it's job.
Overall I think it's a nice little widget. Great for maxing out performance, and maxing battery life by limiting performance.
Phone:
Black G1
JF 1.51
Yup...me too
I will make the change but it sometimes does not refresh the gui. It will also not work if you reboot. (if i remember correctly) also tons of force closes. I am on 6.01 and have tried JF1.5 and am curently on HERO but have not had success with the widgets on the build yet so I dont have a confirmation.
Could someone post the previous version of this app please? The updated version on the market shows "problem loading gadget" on the Hero rom when you add it to the screen..previous versions worked without any problems. Thanks in advance.
edit: nm..fixed it..just had to run the odex optimization script and all is good again
just use SETCPU from market...its more stable thank open overclock......at least it doesnt unclock back to 384mhz
what is a good configeration for over clock..i dotn want to mess up my phone??
I was thinking the same and should I have it on always max. Or what?
I've got mine set to 128Mhz min and 527Mhz max, it has drastically increased my battery life. Batter life barely drops 1% overnight.
Anyone have the Version before the 1.7 update. The new update doesnt seem to work on hero w/ Rosie.
You can grab the 1.6 apk from the Dev's Google Site (check the Files section).
1.7 doesn't work with Ion for me either
zgmf-x322a said:
just use SETCPU from market...its more stable thank open overclock......at least it doesnt unclock back to 384mhz
Click to expand...
Click to collapse
Did setcpu support choosing a different freq. when the screen is off? Setting that to 128 - 245 has helped my battery greatly. One question for anyone using OC apps, does your phones at any time run at a lower freq than what's specified as the maximum? I just set my phone to (with the screen on) to 128 - 384 because if I put it all the way to 527 it won't come down (unless I turn the screen off).
masr1979 said:
Did setcpu support choosing a different freq. when the screen is off? Setting that to 128 - 245 has helped my battery greatly. One question for anyone using OC apps, does your phones at any time run at a lower freq than what's specified as the maximum? I just set my phone to (with the screen on) to 128 - 384 because if I put it all the way to 527 it won't come down (unless I turn the screen off).
Click to expand...
Click to collapse
1.2.0 does not currently.
I swear, the next version will (I swear!). I'll also add some basic battery profiles (if battery is less than 50%, set the speed to something) and a profile for charging. Of course, it'll always be free here (link in my sig).
does your phones at any time run at a lower freq than what's specified as the maximum? I just set my phone to (with the screen on) to 128 - 384 because if I put it all the way to 527 it won't come down (unless I turn the screen off).
Click to expand...
Click to collapse
Yes. You can usually catch it by doing cat proc/cpuinfo in ADB. It depends on what the phone is doing at that moment.
That's strange it doesn't work well with hero. Since I'm using haykuros adp1.5hr3 it workd beautifully, but the regular overclocker app doesn't even budge and I uninstalled that..idk tho, probably a build issue as far as I'm guessing.
IronCross1788 said:
That's strange it doesn't work well with hero. Since I'm using haykuros adp1.5hr3 it workd beautifully, but the regular overclocker app doesn't even budge and I uninstalled that..idk tho, probably a build issue as far as I'm guessing.
Click to expand...
Click to collapse
The creator of the original Overclock app hasn't updated his application for even Cupcake build support yet. I thought he removed it from the market.
masr1979 said:
Did setcpu support choosing a different freq. when the screen is off? Setting that to 128 - 245 has helped my battery greatly. One question for anyone using OC apps, does your phones at any time run at a lower freq than what's specified as the maximum? I just set my phone to (with the screen on) to 128 - 384 because if I put it all the way to 527 it won't come down (unless I turn the screen off).
Click to expand...
Click to collapse
Yeah NeoBlade (thanks!) gave me the tip on that one yesterday. Seems to be helping a ton.
Min384Max527
Screen off Min128Max245
I can't find Overclock Widget in Market, was it removed?
I have the Overclock Widget and my question is, is it bad for my phone that while my screen is on i have it a min 527 max 527 then while screen off min 128 max 245... I've noticed that phone charges last longer but the useage of going back and forth determental to the phone? Thanks
coolbho3000 said:
1.2.0 does not currently.
I swear, the next version will (I swear!). I'll also add some basic battery profiles (if battery is less than 50%, set the speed to something) and a profile for charging. Of course, it'll always be free here (link in my sig).
Yes. You can usually catch it by doing cat proc/cpuinfo in ADB. It depends on what the phone is doing at that moment.
Click to expand...
Click to collapse
Thanks, that would be of great help. Specially the battery profile settings. If you could also put a monitor, be it a widget or something on the notification bar it would be beyond awesome, or maybe a just notification of when the speed is changed and to what it was changed to.
Does anyobdy know if this SETCPU works on Hero ?
And must the app be on after i set the clock or can i close the app after ?
*bump* need to know
First of all, for anyone who has not yet tried the new Manhattan Project 1.6ghz kernel by Team Whiskey, i suggest you do so (http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=821514). It is currently in alpha but so far has gotten outstanding feedback. Ive personally been running it and I'm not looking back.
Up until now its been well known that SetCPU profiles not only dont work on our phone, but also causes crashes and severe instability. However, SINCE I FLASHED THIS NEW KERNEL (and running Bionix Fusion 1.1), I have successfully profiled my phone. Here is what I've been running all day with absolutely no issues, and my phone running like LIGHTNING:
Main: 1600-200 Conserv.
Screen Off: 200-200 Conserv.
Temp > 50: 800-200 Conserv.
I posted these results in the kernel forum, but I also wanted to post them here for everyone to see because i know that the lack of SetCPU profiles has been a major complaint around here. If anyone would like to try this out and verify that it works for them also with this kernel, please post here, so everyone can finally enjoy the beauty of overclocking AND underclocking.
Once again, I'm running Manhattan Project Kernel and Bionix Fusion 1.1
Outstanding!
Appreciate the profiles. Should be a great help. I personally lowered my Temp to 40c but thats just my opinion
Excited to get the running will tell results soon!
So had my phone sitting for a bit, it became unresponsive and i think it had something to do with the sleep profile. I went ahead and changed it to 400/200 conserv for testing.
Awesome. But is the set on boot option still not working?
Oh and just an educated guess bit I would figure no Voodoo on this kernel. So disabling just in case before I update
YatimaMeiji said:
Awesome. But is the set on boot option still not working?
Click to expand...
Click to collapse
i dont even bother, its not really needed....even if its unchecked yoru settings are preserbed upon reboot
----------------
UPDATE #2: after 5 hours of no problems my phone finally started crashing, so i have may have spoken prematurely. But I'm stubborn, so Im still gonna try every damn combination possible until my phone tells me to go f*ck myself haha
I will post my feedback as well...
OP, are you running any lag fixes?
drizze99 said:
I will post my feedback as well...
OP, are you running any lag fixes?
Click to expand...
Click to collapse
OCLF Ext2 v2.2
--------
I'm also trying "Overclock Widget" to see if i get better results
As much as I love Overclocking to 1600ghz, my it is beautiful....id also feel much more comfortable being able to underclock when its sleeping.........this is probably a wild goose chase, but i dont care, im bored at work
With screen off 200/200, phone does not wake up, changed to 400/200, still no wake up. Both set to conservative. Disabling profiles for now.
EDIT: Found the problem, if you enable Performance scaling on the main tab, and switch it back to conservative, it really doesn't switch. This is what was causing my Vibrant to not wake up! I had to set it to on-demand, leave setCPU and switch it to conservative, before it would stick. Re-testing 200/200 screen off.
TopShelf10 said:
OCLF Ext2 v2.2
--------
I'm also trying "Overclock Widget" to see if i get better results
As much as I love Overclocking to 1600ghz, my it is beautiful....id also feel much more comfortable being able to underclock when its sleeping.........this is probably a wild goose chase, but i dont care, im bored at work
Click to expand...
Click to collapse
you realize that the phone does this automatically, right?
turn on set cpu with nothing going on in the background and just let the phone sit. it will drop down to 200mhz and stay there.
the profile setting for temp is a good idea, but screen off is just going to cause lag issues. if the screen is off and the phone isnt doing a sync or something else, you can bet its probably chilling out at 200mhz
jnp1974 said:
With screen off 200/200, phone does not wake up, changed to 400/200, still no wake up. Both set to conservative. Disabling profiles for now.
EDIT: Found the problem, if you enable Performance scaling on the main tab, and switch it back to conservative, it really doesn't switch. This is what was causing my Vibrant to not wake up! I had to set it to on-demand, leave setCPU and switch it to conservative, before it would stick. Re-testing 200/200 screen off.
Click to expand...
Click to collapse
probably not going to help, but i certainly hope it does!!!
TopShelf10 said:
probably not going to help, but i certainly hope it does!!!
Click to expand...
Click to collapse
Thanks for the hope, it worked. YEAH! It now wakes when it should, and profiles appear to be working just fine.
EDIT: I was testing different benchmarks with scaling on conservative, on-demand and performance to see if they altered my benchmark results. The difference was minimal, but I forgot to change scaling back to conservative and it wouldn't wake. When I pulled the battery, rebooted and checked SetCPU, it said conservative, but was stuck on performance. Changed to on-demand, left SetCPU, back in and changed to Conservative. It worked.
jnp1974 said:
Thanks for the hope, it worked. YEAH! It now wakes when it should, and profiles appear to be working just fine.
Click to expand...
Click to collapse
dont be fooled, it can often work for a while before it shows its ugly side, be patient
I've never had any problems with profiles? The only thing that needs to be kept in mind is that if you check "set on boot" you'll get errors. Anything but "conservative" for scaling will give you errors.
edit: for screen off don't be so stingy trying to set it to 200/200, if you need more battery life then get a bigger battery or spare batteries or Juice Defender , I usually set it to 200/800 and I have no issues.
TopShelf10 said:
dont be fooled, it can often work for a while before it shows its ugly side, be patient
Click to expand...
Click to collapse
I was fooled, ditching profiles altogether, boo
Can conferm that both profiles and set on boot work.
Sent from my Vibrant.
Mouahmong said:
I've never had any problems with profiles? The only thing that needs to be kept in mind is that if you check "set on boot" you'll get errors. Anything but "conservative" for scaling will give you errors.
Click to expand...
Click to collapse
i never check set on boot....what are your profile settings and what ROM/kernel are you running?
OK, I don't have mine OCLF yet but so far so good.
I have run Sleep profiles of 200/200 and 400/200 and the phone wakes up every time. I have gotten a txt message as well during my test and the screen lit up just like Bionix should! Will continue to kep messing with it....
turbosix said:
you realize that the phone does this automatically, right?
turn on set cpu with nothing going on in the background and just let the phone sit. it will drop down to 200mhz and stay there.
the profile setting for temp is a good idea, but screen off is just going to cause lag issues. if the screen is off and the phone isnt doing a sync or something else, you can bet its probably chilling out at 200mhz
Click to expand...
Click to collapse
if it does so automatically then why is there an option to adjust "screen off" values?
Setcpu automatically scales between the high/low you set. SO if you let the main value stay at 1600-100..when the screen is off it will scale at a lower value of course cus you're not using the phone..but it wont stay at 200, because it has a Max of 1600! So depending on background processes it could scale back up to 4 or even 600 while screen is off
MY suggestions:
Download superpower battery saver from market, tweak to turn data on/off with screen and force ondemand cpu scaling
Download Autokiller--donate to get extra functions-- and set the value to Extreme or Ultimate when screen is off and Moderate or Optimal when it is on
I did that without setcpu profiles and it took 4 1/2 hrs to go from 81 % to 70
Im running Fusion 1.1 w/ Manhattan Project
It always restarts automatically, when i make a call, the call just freezes and when i turn the phone on from standby to see what happen, well you guessed it, it restarts! its pretty annoying i went through 2 batteries today in 8 hours, because of the restarts. please help!
If your using the stock kernel I think its overclocked to 768 not sure though. Try one of dec's 691 kernel the #589 is my recommendation. Hope it helps good luck.
Root-Hack-Mod-Always™
jlopez512 said:
It always restarts automatically, when i make a call, the call just freezes and when i turn the phone on from standby to see what happen, well you guessed it, it restarts! its pretty annoying i went through 2 batteries today in 8 hours, because of the restarts. please help!
Click to expand...
Click to collapse
There could be a lot of things happening. The most common is that your running a clock speed higher than that which your phone can handle. Not all heros are created equal, mine for instance starts rebooting at anything higher than 691. Try a different kernel or if using setcpu or over clocking widget to lower your upper end clock speed. Your phone freezing when coming out of standby can mean your lower clock speed is too low. ASOPGB has JIT enabled by default as well. Go into the settings and turn it off, then reboot. You will just have to play until you find out what works for you. Good luck!
runngwlf said:
There could be a lot of things happening. The most common is that your running a clock speed higher than that which your phone can handle. Not all heros are created equal, mine for instance starts rebooting at anything higher than 691. Try a different kernel or if using setcpu or over clocking widget to lower your upper end clock speed. Your phone freezing when coming out of standby can mean your lower clock speed is too low. ASOPGB has JIT enabled by default as well. Go into the settings and turn it off, then reboot. You will just have to play until you find out what works for you. Good luck!
Click to expand...
Click to collapse
Set cpu or similar will not fix the issue, laie was right a capped 691 kernel is needed and probably a capped recovery as well. Btw jit is no longer default in gb, and jit would not cause reboots anyway.
sent from my hero, which no longer sucks ass
il Duce said:
Set cpu or similar will not fix the issue, laie was right a capped 691 kernel is needed and probably a capped recovery as well. Btw jit is no longer default in gb, and jit would not cause reboots anyway.
sent from my hero, which no longer sucks ass
Click to expand...
Click to collapse
Ahh thanks for the info, I had not gotten through all the new posts on the other ASOP GB threads. Good to know though. I have no tried out the rom, I plan to this weekend and my phone does NOT like kernels that clock above 691.
I read on a thread somewhere that you could increase performance by going into settings and increasing from 800 to 925.
I tried this but it seems to just revert back to 800.
First is increasing the speed going to help and if so what do I need to do to get it to stay at the higher setting
I am using cm-7.0.0-encore-signed zip file(CM7 stable)
Increasing the speed sometimes helps some things, others are unaffected.
Set a governor--I believe "on demand" is preferred for the kernel you're using--and increase the max speed to 925.
If you want to keep your settings after reboot, check the "Set on boot" box under CPU settings: this is generally not advised to do until you've run your Nook with these settings long enough to determine that it causes no problems, otherwise you could cause it to hang while booting. And that would be bad.
a.fenderson said:
Increasing the speed sometimes helps some things, others are unaffected.
Set a governor--I believe "on demand" is preferred for the kernel you're using--and increase the max speed to 925.
If you want to keep your settings after reboot, check the "Set on boot" box under CPU settings: this is generally not advised to do until you've run your Nook with these settings long enough to determine that it causes no problems, otherwise you could cause it to hang while booting. And that would be bad.
Click to expand...
Click to collapse
Thanks
Is there some guide as to what increasing cpu speed helps?
ie: does it effect web page loading, running videos, flash, emails or will they run about the same regardless of the setting?
I've not seen a guide or definitive list as to what is perceptibly helped by overclocking, but then again there are so many different ROMs, kernels, and apps out there that one person's experience may not have much bearing on the next person's. I would imagine that the moderate overclock to 925 from 800 won't have blatantly obvious impact on much of anything, though processor-intensive things such as software-decode of videos and maybe Flash(?) might see an improvement. You'll just have to test to see if it happens to make anything work better for you.
a.fenderson said:
Increasing the speed sometimes helps some things, others are unaffected.
Set a governor--I believe "on demand" is preferred for the kernel you're using--and increase the max speed to 925.
If you want to keep your settings after reboot, check the "Set on boot" box under CPU settings: this is generally not advised to do until you've run your Nook with these settings long enough to determine that it causes no problems, otherwise you could cause it to hang while booting. And that would be bad.
Click to expand...
Click to collapse
If you don't use the naitive reader often, you could install CM7 to EMMC and an overclock kernel up to 1.3 GHz (not really sure if those speeds are available with the sd install). Using the EMMC install and overclocked to 1.3 GHz I find my Nook to be exceptionally fast for what it is....an e reader.
Hello all,
so in the effort to make my O4X last like a normal smartphone when not in use iv'e rooted it,unlocked the b/l and flashed custom kerenal.
i did managed to go from an avg. -10%/hr battery drain to 5%/hr but still even if i dont use the phone it will go down alot.
i've tried setcpu,trickster,no frills cpu and none of them could really keep the cpu in the freq. i want. it shos sucess in appling the values but then it jumps below and above the value's iv'e set.
what can be done?
thank you
Have you tried no-frills cpu setting to prevent system for making changes to the cpu frequences?
Yes.. Still not sticking and ignore the freq. I set
@genia.m which kernel are you using ?
Currently I'm on the latest Werewolfjb.
It happened with stock kerenal too..
Might be the rom's fault?
Well it can be, I believe it is the kernel but still, try to change your rom to one which has been reported to not having the baseband wakelock and similar wakelocks . It is the Nvidia Tegra 3 which overrides the definitions and sets them to default. It used to happen with me in stock and on cm too, but I changed to another stock rom , a modified one, and is working like a charm, no stupid wakes.
Try and post the result if you want !