Database Develop

[Q] Help me: Phone seems not to have OS

I've had my phone for about a week now.
I had I9000XXJP2- version on it. i aslo had super user and one click lag fix. Everything was working fine untill this morning. The phone froze and attempted to restart. as it did it was stuck on the Galaxy S GT-I9000 screen and would not boot past that. I am able to get into recovery mode. and a mode that says upload by pressing with the android man next to it.
The phone also will not shut off unless the battery is taken out.
Can anyone help me get back into my phone.
I think some how it deleted its OS.
Thanks in advance.
Also: when in Odin and trying to put in the firmware I9000XXJP2-REV03-PDA-CL464213.tar says that file analysis failed.
As well as when i go to reformat internal sd-card the following comes up
Formatting SDCARD
ensure_root_path_unmounted++
ensure_root_path_unmounted (/mnt/internal_sd)
ensure_root_path_unmounted ret 0
ensure_root_path_unmounted It's not mounted
update media, please wait
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:copy_dbdate_media:Can't mount SDCARD:
your storage not prepared yet. please use UI menu for format and reboot actions.

Do you have a Bell I9000M Galaxy S Vibrant by chance?
Either way, You have the infamous internal SD failure issue. Your best bet at this point is to flash back to stock and send the phone in for repair/replacement.
If it is indeed the Bell phone. Check out this thread.

Yes I do have that model :|
Can you please guide me to how I can get my hands on the stock firmware and the steps in order to flash back.
So this way I can send it in for repair or hopefully a replacement.

eddy_ed11 said:
Yes I do have that model :|
Can you please guide me to how I can get my hands on the stock firmware and the steps in order to flash back.
So this way I can send it in for repair or hopefully a replacement.
Click to expand...
Click to collapse
You can get UGJH2 from http://samfirmware.com. You can then flash it with odin and a 512 pit file. Which is also located at the mentioned site.

Electroz said:
You can get UGJH2 from . You can then flash it with odin and a 512 pit file. Which is also located at the mentioned site.
Click to expand...
Click to collapse
I appericate your help. Thanks for taking the time to help.
Just to make sure, I just use odin and put it in all three sections
[] PDA
[] PHONE
[] CSC
and I already have the 512 pit file.

PDA = CODE
Phone = Modem
CSC = CSC

Rawat said:
PDA = CODE
Phone = Modem
CSC = CSC
Click to expand...
Click to collapse
Understood that part.
but the files that i got from there only come with one zip package.
Not each one individually.
I still appreciate the love from this forum.

eddy_ed11 said:
Understood that part.
but the files that i got from there only come with one zip package.
Not each one individually.
I still appreciate the love from this forum.
Click to expand...
Click to collapse
Some of them have all three in one tar file. If you open up the tar file you should see all of them in there. I believe the UGJH2 has all three in one file. Just load it in the PDA section and leave the CSC and modem blank and flash.

dawgpound6985 said:
Some of them have all three in one tar file. If you open up the tar file you should see all of them in there. I believe the UGJH2 has all three in one file. Just load it in the PDA section and leave the CSC and modem blank and flash.
Click to expand...
Click to collapse
thank you very much as this makes more sense to me. I was used to having all three.
So i wanted to update who ever has been watching this thread. I went back to that rom and now i can get past that galaxy screen and i got the animated S but now its just a black screen.
So all i can do now is send it in for repairs and or hopefully a replacement

eddy_ed11 said:
thank you very much as this makes more sense to me. I was used to having all three.
So i wanted to update who ever has been watching this thread. I went back to that rom and now i can get past that galaxy screen and i got the animated S but now its just a black screen.
So all i can do now is send it in for repairs and or hopefully a replacement
Click to expand...
Click to collapse
What Bell did for me was just give me a new phone. I returned it within the 30 days. I had to wait two weeks for new stock to come in but they just gave me the new phone.

hatdrawn said:
What Bell did for me was just give me a new phone. I returned it within the 30 days. I had to wait two weeks for new stock to come in but they just gave me the new phone.
Click to expand...
Click to collapse
Seriously ? They didnt say that you were playing with the firmware or anything.
Im scared they might say that and then voids me getting it replaced or repaired.
But its good news to know that you got a new one.
And in the mean time did you get a loner phone from bell as you waited for yours to come in ?
Thanks for all the support and help.

eddy_ed11 said:
Seriously ? They didnt say that you were playing with the firmware or anything.
Im scared they might say that and then voids me getting it replaced or repaired.
But its good news to know that you got a new one.
And in the mean time did you get a loner phone from bell as you waited for yours to come in ?
Thanks for all the support and help.
Click to expand...
Click to collapse
I had my old Galaxy i5700 to use, but they will give you a loner phone. Do you have the SPC or whatever they call it? The insurance basically.
I just made up some BS about downloading a large movie to my phone and then it crashed. At they rate all the I9000M users are going with bricking their phones, Bell probably assumes it's a phone problem anyway haha.
The process was actually very simple for me, hope it is for you too. Good luck.

I went in today, told me i needed to talk to tech support.
Talked to tech support
and now i have with me a brand new galaxy s
This time i will not be playing around with it as, i do not want to go through that hassle once again.
I appericate all the help from this forum. and I will look back in here once again in the near future.
I will hold off on updating till froyo is officially released.
Thanks again. This community has been one of a kind.

[Q] E:Can't mount /dev/block/st110 ... my nightmare begin!

Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)

Easiest fix :
Go in recovery and wipe.
Then restart and see if that fixed your problem.
Alternate (Guaranteed solution) :
Go here
Click "Direct Download". If you don't see it try to refresh the page.
Fire up odin.
Extract the zip u downloaded
For pda in odin select the .tar you extracted
Put your phone in download mode.
Flash w/o repartition or nething.
That should work.

Hi! I have try the 2 solutions you mention. But always same problem... I have to mention I have installed speedmod-kernel-k12p-500hz it is correct or I have to replace it?

Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).

Sorry for this question but what do you mean by nething? (sorry english is not my first language!)

So leave everything the way it is.
Dont check mark anything extra.

YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!

Try them.
Now u know
exactly how to restore if nething ever happens

thenamelessthing said:
YEAH! You solved my problem!!! You rock man!
Before I do any other stupid thing any advice?
I have visit some european site about android. They offer some firmware.. it is better to keep the "bell" specific firmware?,etc...
I don't know if I already say this ... Thanks you!
Click to expand...
Click to collapse
Glad to hear you got your problems sorted. Maybe you could hit the "Thanks" button under Daneshm's post.

Daneshm90 said:
So leave everything the way it is.
Dont check mark anything extra.
Click to expand...
Click to collapse
Thank you! You indirectly helped me immensely!

thenamelessthing said:
Hi! Here is the story of my nightmare... I have a Bell i9000m with Android 2.1. I have use GST tweaker tools to root it. I also have do a backup with titanium backup (but I think it useless at this step) After this I have try to change the battery icon with the same utility. When I have rebooted the phone, it stop at the "S" logo for a minute and after the screen go black and the button are glowing and the phone buzz. After this nothing happen. When I go in recovery mode (3e) I obtain an error:
update media, please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions,
copy default media content failed.
I have try with odin3 1.7 to flash the phone but I'm a little bit confused with all possibility...
One stupid thing I have to say, I don't know my original firmware version... ;-(
I have see many good custom kernel... it is possible to fix this and by the way to upgrade to froyo?
It is possible to fix my problem doc?
Thanks a lot for your help!
P.S. Sorry for my bad english, (i'm from Quebec,Canada)
Click to expand...
Click to collapse
this problem accure bcs of
1.you didnt remove bettry b4 flashing rom
2.some stoke filmware give you error message but if you flash with 521+pda+csc+modem file then tht problem is solve
and i found that I9000XWJM5 filmware is really good if somebody need it then pm me i all send zip file

Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE

mobileoneexpress said:
Can anyone tell me how do bring back to life my phone??? I used this on my Vibrant and now my phone is DEAD!!! IT WON'T TURN ON AT ALL
ANY IDEAS??? PLEASE HELP!!! I KNOW I MADE A MISTAKE... ANYONE PLEASE
Click to expand...
Click to collapse
do u have download mode??
if not buy a JIG or send back to samsung

HELPPPP
azzledazzle said:
do u have download mode??
if not buy a JIG or send back to samsung
Click to expand...
Click to collapse
hi guys, i've follow this guide but my phone it's blocked from 15 minutes... any help please?

Daneshm90 said:
Ok then do this :
Get these two
Flash odin with repartition and select the pda,modem,csc
Once done
Go back to odin. Flash just pda with no repartition or nething of the jl2 (previous thing u downloaded in my first post).
Click to expand...
Click to collapse
.. ok. call me a n00b or w/e u want, but i understood everything up until that last part. when u go back to odin.
It would help if you can describe the set-up, because clearly i did something wrong... screenshots would help if possible /:
p.s. i have all the files downloaded from ur previous posts... i just need to know the order. also for the second download file, which file is the PDA file? the one with the word "CODE" in it? or i dont even apply that one .. ;;;

Hello, i've been having the same problem with my GT-i9003, and even after flashing with odin i still have the same problem. Well, it's not exactly the same, cause my phone will keep on a starting bucle if i try to start it without my EXTERNAL sd card (the one i bought), and if i start it with the external card in, it starts, but i can't use anything that uses the sd card (music, camera, 3g), so yes i can call and message and use wifi, but that's not how it's ment to be. Basically it's like i had no external or internal cards.
So everythime i try to flash without the external sd card, i get the mounting error, and if i flash with the external card, it seems ok , but i still can't use any of the things mentioned above.
I'm a bit lost, and i believe it's because i'm missing something (i'm new to this). i don't want to send it to samsung (yet)
i've been using the firmware that came with the phone, didn't try anything new.
to sum up: any attempts to flash with/without the external card are irrelevant, the problem persists.
Any thoughts/ideas/solutions?
thanks in advance.

[Q] soft brick!...help please...noobs-r-us here!!

im a huge noob as far as this tab...i got a SGT-P1000 (3G/wifi version,euro i think..unlocked and bought from amazon)...anyways i want it back to stock!...i have odin3 1.7...and i got the FW JJ4 from samfirmware for euro..i didnt know what PIT file to get so i just got GT-P1000_M.PIT...the PDA file that i got was
P1000XWJJ4..but when i added it, it doesnt load all files in that file...so i found somthing on youtube and xda from RotoHammer..and tryed that route...it was an all in one file and had the PDA and PIT for me to choose..but the odin failed each time i tryed.....any help would be welcome thanks so much!!!!

dkills082 said:
im a huge noob as far as this tab...i got a SGT-P1000 (3G/wifi version,euro i think..unlocked and bought from amazon)...anyways i want it back to stock!...i have odin3 1.7...and i got the FW JJ4 from samfirmware for euro..i didnt know what PIT file to get so i just got GT-P1000_M.PIT...the PDA file that i got was
P1000XWJJ4..but when i added it, it doesnt load all files in that file...so i found somthing on youtube and xda from RotoHammer..and tryed that route...it was an all in one file and had the PDA and PIT for me to choose..but the odin failed each time i tryed.....any help would be welcome thanks so much!!!!
Click to expand...
Click to collapse
You still can boot up your tab? Need the firmware information from *#1234#. If you are still on froyo then bootloaders should be unsigned.....

Better check overcome.mimzo.com/?page_id=64 section "Preppin’ The System…".
It is a wonderful guide for problem free flashing; for ANY version.
K.
ps: unable to paste "external links" due to small number of posts, copy/paste link above.

still now luck but was able to get to recovery mode...
the tab only would load the GT/samsung screen then freeze...i tried a few different firmwares but no luck...i tried this site...
how-to-flash-latest-gingerbread-2-3-3-firmware-to-samsung-galaxy-tab-p1000/?amp....and odin seem to work...but still didnt load..got to recovery and wiped cache and data and rebooted..still nothing..but i also noticed that the wipe was failing....hope the pic can show whats up...now im at a stand still....

dkills082 did u get this sorted as i am experiencing this issue for 48 hours now. i am sick as a dog trying different firmwares and still wont properly boot. still stick on Galaxy GT samsung screen..

I had problem similar to that, I took it back to stock froyo rom, the version originally there, and then proceeded to flash up to gingerbread again. It seems to have worked as I'm on Overcome - Hermes now with no problems.
I might suggest that you try to flash a kernal that supports ext 4 as you might of formatted to that... The overcome 1.64 seem to work but you will still have to flash the Froyo bootloaders....

still stuck...
still stuck but still can get it to recov...i tried other firmwares..but no luck...im lost...wondering if jtag would save it...the problem is that i dont know what original FW was on this tab...i got some new errors idk what to think of them...

pics of the errors
pics of the errors i get in recovery

Help Please I've Bricked my Samsung 8.9 wifi tab

Hi All
Today I thought I would try to install Jellybean on My tab, I am a total nube at this but thought I could follow the tutorial. First I rooted my tab, then tried to backup the tab but it didn't work and then I thought what the hell I'll just try it.
Now it just shows the black and white Samsung Screen and won't turn off.
When I go in to the Android System recovery a message shows - /cant access to ‘system/csc/XEF/system/
I've tried using Odin and all seems good but I can't get ClockWorkMod to appear on my tab.
I bought my tab in the UK but it got shipped from France so has default language setup in French If that has anything to do with it.
Please help, I've tried following some threads on here but some of it seems to be out of my depth. Could someone explain in simple terms how I can get my tab back to normal?? It would be very much appreciated. I'm so annoyed at myself :crying:
Thanks in advance
Mike

Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.

JU57FL1P said:
Seems like you dont have root for some reason... there is a all in 1 guide in general section, u might wanna check that out... then install CWM and after that a new rom after installion clear dalvik and data.
Click to expand...
Click to collapse
Thanks for your reply, I've been looking at the All in 1 guide but it does confuse me a little, could you explain how I install these as I've been trying to fix this all day and haven't gotten anywhere.
Thanks

Help its getting worse!
I read that all for one help guide and decided to flash the pit file since nothing else was working, now my tab is stuck on the android downloading screen and wont go off it, I can't even get it to go in to recovery mode! Help!!!!!!!!!!!!! :crying:

Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...

JU57FL1P said:
Ummn u need to use odin to fully restore ur tab, wait for someone to provide u with the files... i dont have enough experience with odin...
Click to expand...
Click to collapse
Thanks, can someone please help me with these files please I'm desperate. :fingers-crossed:

Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:

MikeMcGrathXmen said:
Right, I've been looking at this for 2 days now.
I've noticed that their is a CSC file option on Odin, I'm also in the middle of downloading the stock rom P7310XWLA2 which is the French version of the ROM.
So when it has downloaded should I try to find a CSC file as well as the PDA file to send to my tab?
Please Help :fingers-crossed:
Click to expand...
Click to collapse
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???

MikeMcGrathXmen said:
ok I've loaded the stock rom P7310XWLA2 from odin there was no seperate csc file
But the tab started to load up 3 things came up with failing to mount data and cant mount your storage is not prepared yet on updating application, applting Multi CSC and installing multi CSC
The tab then rebooted and all looked well until the tab asked 'Entrer mot passe' which I think is enter you password i entered 'samfirmware.com' but it says desole - sorry
Any ideas please???
Click to expand...
Click to collapse
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:

Oh my god I've fixed it!
Finally got there in the end thanks to this tutorial phew :good:

MikeMcGrathXmen said:
Or should I just install the uk stock rom?
Im really going round in circles here and could really use some helpful advice, please :fingers-crossed:
Click to expand...
Click to collapse
Luckily I've never had to use ODIN with my Tab, however back in the days on my SGS I used it a lot.
So just a few things: you don't have a CSC file, because your tab is a Wifi only model, so don't worry about that.
Also, be sure to tick the re-partition box on the left if you are using a pit file (which at this state you should), this should repartition your internal SD and thus have a clean install.
Good luck

Thanks, but i've got it working and I'm not gonna mess round with it again.
Can't believe i finally got it working!

[Q] galaxy mini thinks its a GT-S5360

After installing JellyPlus and Cor Plenus kernel on my Galaxy Mini for program compatibility, I find the rom a little unstable, and wish to retun the phone to its origional status
Using CWM to load new rom gives error of there not being enough room on the device
Using Odin downloader, either the phone is not recognised, or the operation works, but sends the phone into boot loop, depending on the version of Odin I use
Using Kies, well, my phone is not 5570 any more, but a 5360 which is not supported for firmware upgrade
I am computer literate, Pc, Tablets, Windows, Android etc - No, I only thought I was
I have tried many things, and do not see how to revert the phone to factory (ie GT-S5570I STOCK ROM from its current status of GT-S5360)
Please, please help. I am happy to take a big kicking if this is easy, obvious, or many times previously covered - a push in the right direction would be greatly appreciated
Thank you, Paul

If you have bootloop, wipe data from stock recovery. And as I read read your post, you flashed Mini Plus ROM and kernel! So be happy, that your phone works!
Sent from my GT-S5570 using xda premium

no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin

dheeraj (dhlalit11) said:
no he flashed a galaxy y rom on his mini plus
lol
now what you can do is boot into recovery and wipe everything except sdcard from mount and storage option (do not format sdcard) then flash a custom rom meant for mini plus and then try to flash a stock rom through odin
Click to expand...
Click to collapse
Same thing lol
Be happy, it still works!
Sent from my GT-S5570 using xda premium

What I did.!
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!

hmm try to flash a kernel made for ur device , coz the kernel has the main properties of ur device for kies to detect, tat shud be ok,wont be requiring much space for kernel flashing i suppose :good:
btw there shudnt besuch errors, the updater script is acually set to swipe everything out b4 cpying the new files into ur rom
or else flash a custom rom, its easy tat way

just flash a firnware through odin

dheeraj (dhlalit11) said:
just flash a firmware through Odin
Click to expand...
Click to collapse
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone

rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Fix for bootloop: wipe data from stock recovery. Is it hard to read/search?
Tapatalk 2-vel küldve az én GT-S5570-ről

rpaurey said:
My phone was a GT-S5570I
I flashed the following, thinking that it was for my phone - see last bit?!
[ROM][KERNEL][ICS/JellyBean mod] JELLYBLAST V3 for Galaxy MINI/POP PLUS [GT-S5570i]
I am grateful that the phone still works, and very grateful to all of you who have replied
What I would like to know is how to enable enough free space on the phone so that I can flash back to stock 2.3.6 (as it was when I bought it)
should I pretend that it is a pop plus now, and look for solutions from there?
The 'trasto' has let me flash once again to the above rom / kernel, but often I am stuck without carrier - emergency calls only. Other than hat, it works very nicely!
Click to expand...
Click to collapse
rpaurey said:
My thoughts exactly!
Can anyone recommend a method - have tried versions 1.87 (flashes, but boot loops afterwards), and 4.38 which does not recognise the phone
What I would really like to know is if there is a way to ´make room´ on the phone so I can flash through CMR - I too thought that a custom rom would clear everything out of it´s way, as did the jellythingyrom which has successfully put android 4.1.1 on the phone
Click to expand...
Click to collapse
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...

shwe said:
Don't panic my friend ....
and YES, after upgrading to JellyBlast Samsung Kies recognized as 5360 ...
but everything is working well ..
I can backup / restore like normal phone ....
so why do u bother about that ...?
What I think is 5360 has the same hardware like 5570i ...
or maybe JellyBlast was ported from 5360 ... !!!!!
Here , your question is answered ...
U don't have to need the free space as flashing original FW doesn't need to put the file to phone ...
Click to expand...
Click to collapse
Thank you, and .......... thank you!! I may be being hysterical, but main reason for wanting to go back to original is because the phone now often is stuck with emergency calls only. On rebooting I also sometimes get an Unlock Network screen (should I have unlocked the phone first? Hmm - I have read so much over the last few days that I am not too sure any more. Shall try flashing the original firmware cwm or odin, or both??!! Have you any views on the problems that >I have re the above posts? Kind regards, Paul PS sim works as normal in nokia phone

Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...

all done and dusted
shwe said:
Hi Paul ...
According to your post I assumed that u have GT-S5570i like mine ...
I don't face any situation like you posted ...
The reason is may be ...
U didn't wipe the Dalvik cache
try wiping and see ...
And for the Network unlock screen ...
What I think is your country or region CSC code is different from the Jellyblast's default CSC code ...
in that case U need to know your original CSC code and need to change back ...
this is what I thought ...
Click to expand...
Click to collapse
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini

Same problem
rpaurey said:
Bueno, managed to find what I wanted (other than a functioning (for me!) 4.1.1 rom)
Phone back to original status, and only wasted 6 euros on a replacement sim which I didn't need!
Have located ´'stockrom+odin s5570i' zip - if anyone has similar problems can mail it to them
The zip has the PDA, PHONE(MODEM) and CSC all split up, and I zapped the BOOTLOADER as well, just in case
All as I want it, and at least I now know how to recover when I try a 422 Rom next time!
What a shame Odin not available for this phone in 'one packet option', and what a shame nothing like Nexus Root Toolkit for sgmini
Click to expand...
Click to collapse
Hi, I have the same problem. Can you please send yours zip and instructions? For 5570 Odin not sees my phone and for 5360 See, but I do not know how to enter the pit. With it a little scared. I tried. Zip update, but everything just mods for 5570, which is now reports differently and therefore probably do not install via clockwork.
I play with it all day and google it to me a little laugh .. omg (when you have 20 tabs open and there is a mess).

Problem solved
So we solved the problem with rpaurey successfully. Odin really need to be right on the GT-S5570I and I think "I" even at the end.
Stock rom I had only a little English and other languages​​, but downloading Czech now. Thanks.