Related
For those that were considering a new housing for their X7501 I found a website I recently placed an order with. For the past few weeks my searches were coming up with the housing for the X7500's but I lucked out tonight. If anyone's interested in purchasing a new housing the link is:
http://www.order-bulk.com/advanced_search_result.php?keywords=dopod+u1000&Search=Search
I'll give feedback after my order is received.
now i need to have $100... i want this. i will need this in the future, but i must get one right away.
jetherson said:
now i need to have $100... i want this. i will need this in the future, but i must get one right away.
Click to expand...
Click to collapse
LMAO, don't forget to order the disassembly tools. I'm still waiting for my order to come.
can someone post a link on how to dissasemble the htc advantage 7501, i am really bothered with my scratches, and I am considering to buy a new housing, but the question how to install it.
my scratch is on the chrome close to the screen, very annoying scratch, please anyone come up with a solution to remove scratches, or help us providing a how to guide to install new housings
hykhleif said:
can someone post a link on how to dissasemble the htc advantage 7501, i am really bothered with my scratches, and I am considering to buy a new housing, but the question how to install it.
my scratch is on the chrome close to the screen, very annoying scratch, please anyone come up with a solution to remove scratches, or help us providing a how to guide to install new housings
Click to expand...
Click to collapse
I know responderman had done the swap of the housing already. He might have some information along with pictures on it. If you don't get any replies or find anything let me know and I'll see what I can come up with. I too myself will need it anyway. My housing should be here any day now.
EDITED:
Use responderman link , post 9
Just to say it is tricky will be an understatement, so I would ask for advice from somebody that has done it, even with the manual, just to minimize damage.
Im here guys its not that hard when you know what to look out for. I will let you know more when you are ready.
Jay
I am receiving my housing today, please provide details and step by step guide, how you did it. I am awaiting your feedback your help is very much appreciated
Athena Manual
Hi Again,
The official Athena Manual HERE will tell you much better than I can from page 29 to 33, But if you have any questions then ask me on this thread so everyone can read it please.
Regards
Jay
well looks so complicated, now i will till the phone really becomes nasty looking, then i will try this
PBL1 said:
There you got
Just to say it is tricky will be an understatement, so I would ask for advice from somebody that has done it, even with the manual, just to minimize damage.
Click to expand...
Click to collapse
I'd love to look at the manual you attached, but when I try to unzip it, it asks for the next part of the archive... was this a spanned zip file?
The file link Responderman gave is coming up blank for me. Anyone got a better link to this repair manual? I dropped my x7501 and smashed the corner of the case - still works fine, but the case is slowly disintegrating....!!!
same here, cant download megaupload file, and part of zip missing :-S
thx
Zip file? Its a PDF file and the link is working fine. Ive just tested it on another computer. You should be able to download it and start it straight away????
Jay
responderman said:
Zip file? Its a PDF file and the link is working fine. Ive just tested it on another computer. You should be able to download it and start it straight away????
Jay
Click to expand...
Click to collapse
I am so frustrated. After ordering my housing, it finally came today (2 wks late), only to find out it's the X7500 housing. Not only that but getting out the car it fell on the face and got a slight scratch on the side. I will attempt to reach out to the supplier and see why they have false advertising on their site. I'll see how the return works out.
tootallk2000 said:
I am so frustrated. After ordering my housing, it finally came today (2 wks late), only to find out it's the X7500 housing. Not only that but getting out the car it fell on the face and got a slight scratch on the side. I will attempt to reach out to the supplier and see why they have false advertising on their site. I'll see how the return works out.
Click to expand...
Click to collapse
Sh*t thats bad news, sounds like they dont know what they are on about. I would complain to them. Are you happy with the work you need to do to change it?? it aint that bad honest, the worst bit is removing the plastic cover on the top.
Keep me posted
Jay
responderman said:
Sh*t thats bad news, sounds like they dont know what they are on about. I would complain to them. Are you happy with the work you need to do to change it?? it aint that bad honest, the worst bit is removing the plastic cover on the top.
Keep me posted
Jay
Click to expand...
Click to collapse
I sent them a complaint letter. I'm pretty confident I can do the swap out. I'll keep you posted on how it all goes.
tootallk2000 said:
I sent them a complaint letter. I'm pretty confident I can do the swap out. I'll keep you posted on how it all goes.
Click to expand...
Click to collapse
By the way, did you have any trouble with the athena manual download I posted? it seems some cant see it, but they are on about zip files
Jay
managed to get the megaupload pdf downloaded, must have been my ffox noscripts!
ok, so p29-33 seem ok, how does the bottom panel (with the battery cover) slide off?
also, what about the vueflo button, does that just get pushed in and then the internal unit slides out?
thanks for your help, i too ordered off order-bulk, the black case, what is difference to x7500 case?
also, navi rubber button, does the rubber bit in center pull out, then reveals a screw? or does the whole bit screw off?
HoggerJeff
I'd love to look at the manual you attached, but when I try to unzip it, it asks for the next part of the archive... was this a spanned zip file?
Click to expand...
Click to collapse
yea sorry I missed two files, since the total size is 9M and responderman posted a link for the same manual, I have deleted the original posted file and edited my previous post ( the limit is 8M for attached zip files)
responderman
by the way, did you have any trouble with the athena manual download I posted? it seems some cant see it, but they are on about zip files
Click to expand...
Click to collapse
now you know.
badaas
how does the bottom panel (with the battery cover) slide off?
Click to expand...
Click to collapse
you pull the navi rubber out, under it there is an screw, unscrew it and take the joystick, take out the power and comm manager/record bottoms
the top part is taken by starting from the corner ( next to the front camera) and continuing through to the other side (be careful with the volume bottom
pull the two plastic layers ( one in the corner other near the centre)
to take the plastic at the bottom, remove the screws and careful take the part
Now you should have a metal case opened at top and bottom, slide the internal parts towards the top
I didn't find it easy so read the manual until all is clear and good luck.
got mine today, no vueflo replacement button, and case bottom cover is warped! grrrr, peed off now, got an orange 'hole' where the vueflo was lol! (which apparently you can leave in place, same for 'ok' and 'menu' buttons on left, as theyre attached to the case, not the internal housing, which will slide out past them with no trouble! - hindsight eh!? marvellous thing!!!).
oh, and my rubber nipple cover pinged off somewhere into the obscurity of my carpet, great!!
edit: just a note, you don't have to take the battery bottom case part off first. you can do that once it's all slid out. much easier, as you can get to the little buggery clips without hassle!
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.
brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.
Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"
brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it
I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.
I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together
kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????
Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF
here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot
I am so interested to know if someone has guides or videos guidance to change faceplates on the Magic/MyTouch3G.
My girl friend has a black phone and I ordered her a new white housing for the phone from eBay. I received everything including tools but there was no any instructions. I gave a try from what I can see but it was not successful. I even searched on net but no luck yet.
Any comments will be really appreciated.
here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.
looktall said:
here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.
Click to expand...
Click to collapse
Thanks for information bro.
Actually, I need to give a try and figure out if I could just pull the faceplate along without totally pulling it apart. It will be so painful as I wont even realize if something goes wrong. Damn wish I had some videos on this.
The mytouch is easy to break down but it would have to be totaly taken apart to change out the plastic housing.
looktall said:
here's the magic service manual.
it details how to pull apart the phone into it's individual parts (colour pics included)...
http://phandroid.com/htc-magic-manual.pdf
you may or may not need to totally pull it apart just to change the faceplate (i don't know), but it'll still give you a good idea of how it all goes together.
Click to expand...
Click to collapse
Oh that's awesome. I wasn't even LOOKING for this but it's awesome.
Just one problem with that manual, it's for a prototype version of the sapphire which has the hero style buttons on the bottom instead of the Magic ones. Now, I'm not sure if this is the only difference but just bear that in mind.
I have fully disassembled 3 MyTouch phones. Easiest smart phone to break down so far. Just don't drink any cafiene before hand. not diffucult in any way. just needs a steady hand. HOWEVER! If you have never done this kind of thing before you will likely screw something up. I have been tearing electronics down and repairing them for twenty years. The ribbon type cables can be torn VERY easily, one slip with a screw driver can tear into a board and destroy it beyond repair, too much stress removing a fragile screen can break it. The learning procces on this type of stuff is an expensive one. Go VERY slow and be VERY patient.
Very tempted to replace housing on mine, currently have grubby white Voda one and would like black/red HTC one on ebay. However, as poster said before I have little experience in doing this and nervous to do so. Not sure if I am brave enough!
Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4
Dr.Preston said:
Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4
Click to expand...
Click to collapse
I bought the same in white color says with Google in back cover, and it worked perfectly with my Rogers Magic. I think Magic, MyTouch3G all come under G2.
That might be a bad sign, as the rogers magic I believe is the 32a mainboard and the mytouch is the 32b mainboard. But then again, maybe the mainboard version has nothing to do with this. Is there someone out there who knows for sure that can confirm this?
Somebody should make a video of the housing replacement... i have changed some housings but never a touch screen phone... help would be appreciated...
Hell ya.. I was googling it for days 'n weeks. There was no luck so I went looking for phone repair shops. Finally found a chinese store and they did it for me for $20. That is my story.
Any luck with a video for this?
Dr.Preston said:
Can anyone confirm whether or not this housing fits the Mytouch 3G?
It looks like it does. (You can usually tell by the camera hole on the back plate, it's higher on MT3G's) but I'm not sure.
Thanks.
http://cgi.ebay.com/BLACK-OEM-HTC-M...wItemQQptZPDA_Accessories?hash=item27abf417a4
Click to expand...
Click to collapse
This is really late and all, but I don't think that housing would work with MyTouch3Gs because the spot where you speak is on the opposite side of the MT3G
Oh man...That looked very complicated
So, in order to change the housing, I need to fully torn apart my phone?
>.> I knew I shouldn't bought the 3 years warranty for $80
cashoplz said:
Oh man...That looked very complicated
So, in order to change the housing, I need to fully torn apart my phone?
>.> I knew I shouldn't bought the 3 years warranty for $80
Click to expand...
Click to collapse
Yeah you have to. I would recommend you to give to someone who does phone repairs.
Where did you have it changed? I looked all over pacific mall and no one would do it.
magicalthinking said:
Where did you have it changed? I looked all over pacific mall and no one would do it.
Click to expand...
Click to collapse
I had the same problem on every phone shop in Pacific Mall. But I finally found a one in the Pacific Mall. Probably they are the only people do housing changes for Magic You got to go the area that has phone parts and repair section.
Enter to the mall from the main entrace and turn right and walk all the way down and then turn left. You can find it somewhere in the middle on your left. Sorry I can not remember the name of the shop.
By the way I had my own housing. I do not know if they carry in stock of those.
Oh man, Ive done some research and found a few local phone repair shop who can replace my housing but they all charges over $50.00 = =..I'm going to do it on my own
Okay... I'm finished.
the overall process only should be taking about 30-45 mins.
just follow the guide from step 1-7, then you can jump to step 29 which is remove the LCM from the plate.
Then put the LCM along with rest of the motherboard (watch out there is 2 parts linked together) into your new plate.
Now, put everything back together.
I took delivery of a brand new sealed Nook HD+ that I bought of eBay, yesterday and as soon as I got it open I noticed that the "n" for the home button seemed a bit less proud than other Nooks I've seen. I've since compared it directly with another Nook HD+ and there is definite movement in the glass front, that is noticeable when pressing the home button on mine.
Is this a common fault and is there a way to fix the problem myself?
Drawingbreath said:
I took delivery of a brand new sealed Nook HD+ that I bought of eBay, yesterday and as soon as I got it open I noticed that the "n" for the home button seemed a bit less proud than other Nooks I've seen. I've since compared it directly with another Nook HD+ and there is definite movement in the glass front, that is noticeable when pressing the home button on mine.
Is this a common fault and is there a way to fix the problem myself?
Click to expand...
Click to collapse
I think you must contact with seller and ask to replace item or just send back and get full refund. Your described problem indicates to faulty item.
I don have any other information and i can only hope next things:
- Item is badly composed and must be covered with warranty to item change/replace with new one.
- Item was previously used and dropped, then no warranty cover. Maybe you see some scratch on corner or somewhere. Only full refund at seller and item back sending.
- Item was previously opened/disassembled with wrong method and assembled back wrong too. Again, if there was no reference about this button problem on ebay description, then you must get full refund and etc. Contact seller or open case on ebay if you have problems with contacting with seller.
Hope you get solution.
I'm loathe to return the item because it's otherwise perfect. The box was factory sealed when it arrived and still in cellophane. This strikes me as a fault caused by screws not being flush and could probably be rectified at my end.
Anyone else had a similar problem?
Drawingbreath said:
I'm loathe to return the item because it's otherwise perfect. The box was factory sealed when it arrived and still in cellophane. This strikes me as a fault caused by screws not being flush and could probably be rectified at my end.
Anyone else had a similar problem?
Click to expand...
Click to collapse
I have made disassemble guide for all Nook HD+ users located here. If you look to pictures close (on 9 step) then you see that there is nothing to do with screws. Screen is assembled with double sided tape (most of todays screens are assembled this way, because this is cheap and etc).
Actually i recommend contact with B&N or ebay seller to get warranty replacement. This is certainly FAULTY assembled item.
datas0ft said:
I have made disassemble guide for all Nook HD+ users located here. If you look to pictures close (on 9 step) then you see that there is nothing to do with screws. Screen is assembled with double sided tape (most of todays screens are assembled this way, because this is cheap and etc).
Actually i recommend contact with B&N or ebay seller to get warranty replacement. This is certainly FAULTY assembled item.
Click to expand...
Click to collapse
Well, I've tried to contact B&N but their online chat support has told me to phone them. :/ Not great for someone who is at work all day with only a mobile phone and an international number to call. They wouldn't provide me with a UK freephone.
Anyway, from that disassemble guide (thanks for the efforts with that) I can't see how the screen element is joined together, because the glass is lifting away from the "n" home button. The plastic bezel has movement in it, but it's the glass front that has the adhesion problem.
I take it they have just glued that thing together. If so trying to get a warranty replacement is my best bet. I'm brave at opening kit, but I'd rather not end up with a useless/more damaged brick.
Yeah, this is rough truth that B&N support for outside US and UK people is HORRIBLE and annoying. Very small thing and "make call" ... f***
Can you make some close pics about your problem? Just for interest I ask.
And if you need some close pics at any part of Nook HD+, then just ask. My test item is still half opened (bezel not attached back with double sided tape) and i can open is quick.
datas0ft said:
Yeah, this is rough truth that B&N support for outside US and UK people is HORRIBLE and annoying. Very small thing and "make call" ... f***
Can you make some close pics about your problem? Just for interest I ask.
And if you need some close pics at any part of Nook HD+, then just ask. My test item is still half opened (bezel not attached back with double sided tape) and i can open is quick.
Click to expand...
Click to collapse
I can take some photos, but not until later tonight at the earliest. I would be interested to know how the screen assembly is glued/attached together, if you were able to take some photos of the bottom edge, that would be very enlightening.
Yeah, I take photos for you tomorrow and when I seen which part you mean. But I must say that I dont go take apart screen. I can only investigate how its made
For reference only! This will absolutely VOID any warranty you may have on your device. If you believe you have a VALID reason to take apart a fully functioning phone, you DON'T! You are responsible for your actions and the reuslt of your actions, don't lay fault with anyone else.
The phone used to create the guide is my first D415. It took a long walk of a short box and shattered the screen. Let's leave it at that, please. And you thought I was going to take apart a fully functioning phone, didn't you?
You shall acquire and assemble in the same place, these items
The phone you wish to disassemble
A "precision" philips head screwdriver (don't know what a philips head is? Please go elsewhere)
A thin piece of plastic, an ID or bank card, guitar pick, even the edge of a plastic knife (file off the "teeth") You get the idea....
Optional items
Small blunt tip tweezers
Container to hold screws and such
Magnet to find the screws you drop (you will drop at least one)
Magnifying glass
Pictures say more with less words, so.....
I missed something when I tried to embed my pictures. For now, please look at the attached photos. Sorry about that.
*****EDIT****"*
there is an excellent video here
******UPDATE******
My apologies for not staying up on this. Life and my One+ One obsession got in the way. As
Refer to video link above for detailed instructions regarding hardware disassembly/reassembly process
I have ordered a WHITE replacement screen to test. Let's hope that it arrives with touchscreen issues.
I will update thread upon arrival of touchscreen.
****** EDIT again ********
Here is a photo album consisting of extra pictures that didn't make the guide. Some have fairly useful info as well as a few DON'T do this or you will break your phone even more pictures.
I've also added an update concerning reversed x axis starting at post #43
ID Numbers to compare
ID #'s are listed to the side. Again, sorry I couldn't embed them. I still searching for a solution....
jran0880 said:
If you believe you have a VALID reason to take apart a fully functioning phone, you DON'T!
Click to expand...
Click to collapse
Reasons, you say? Ha! Since when have I needed... reasons... to do anything?
But anyway, this is a very good guide! Thank you for taking the time to write it with the very detailed pictures! This should definitely be a sticky!
Sent from my LG-D415 using XDA Free mobile app
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.
Very comprehensive guide, you really went out of your way! Kudos!
Please tell me how to get my pictures to display in my post. I thought I followed the instructions I found. However, the OP was from 2012. The link I created for each picture had HTML tags and from reading, xda does not use HTML for security reasons. So I deleted the HTML tags and tried the bb code, with no luck. Your guidance is greatly appreciated. Thanks!
jran0880 said:
Please tell me how to get my pictures to display in my post. I thought I followed the instructions I found. However, the OP was from 2012. The link I created for each picture had HTML tags and from reading, xda does not use HTML for security reasons. So I deleted the HTML tags and tried the bb code, with no luck. Your guidance is greatly appreciated. Thanks!
Click to expand...
Click to collapse
To show pictures, like in @Ilxaot's post above you, they need to be online somewhere. Use the Image tag
and the enter the image URL.
Now as I write this, I cheated with the image in my last paragraph. I copied it from the editor, right click -> Copy, and then pasted it in to the edit box... Weird. That may work too. LOL
jasonmerc said:
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.[/QUOTE
Any luck with the other 10?
Any of the identifiers i posted help at all?
Click to expand...
Click to collapse
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
pre4speed said:
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
Click to expand...
Click to collapse
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
jran0880 said:
jasonmerc said:
I have begun the process of disassembling the phone, and so far I was able to get 1 screw out (yay me). Guess what color the screw was? Green.[/QUOTE
Any luck with the other 10?
Any of the identifiers i posted help at all?
Click to expand...
Click to collapse
I gave up. You see, the eyeglass screwdriver I have is EXTREMELY small and doesn't fit in the screws perfectly, but it's the best I've got. Coupled with the fact that green LockTite is on the screws (green LockTite is the strongest LockTite they make), it pains my fingers to have to keep on jamming down on the screw to get enough of a "hold" on the screw while I turn it. Maybe in the future I'll buy a bigger screwdriver so I can have a better grip on it, but for now I'm done.
It's probably for the better anyway... I probably would have dropped the digitizer in the toilet or something if I got it apart.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
jasonmerc said:
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
jran0880 said:
I gave up. You see, the eyeglass screwdriver I have is EXTREMELY small and doesn't fit in the screws perfectly, but it's the best I've got. Coupled with the fact that green LockTite is on the screws (green LockTite is the strongest LockTite they make), it pains my fingers to have to keep on jamming down on the screw to get enough of a "hold" on the screw while I turn it. Maybe in the future I'll buy a bigger screwdriver so I can have a better grip on it, but for now I'm done.
It's probably for the better anyway... I probably would have dropped the digitizer in the toilet or something if I got it apart.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Yeah, i dont recommend attempting cell phone disassembly while pearched on the "throne". Not judging! Just a personal decision on my part.
I wish i had the sense to know when to take that deep breath and calmly walk away. If i were in your shoes, the other 10 screws would be rounded out by now. There would be no accidental drop into the toilet, the phone would go down as the only l90 d415 to understand the meaning of swirly.... Wouldve made a great video though.
Click to expand...
Click to collapse
pre4speed said:
Using your guide, I successfully disassembled, replaced LCD and digitizer of my son's phone (like yours, sudden stop at high velocity) with Chinese purchased parts from eBay. BTW, didn't drop one screw lol. However since they weren't OEM parts, I've got the reversed touch I've read about and seen videos of (swipe right, screen moves left; touch right side of screen for a check box on the left side). Any idea of a fix? Let me tell you it was a pain signing into WiFi. Thanks for your guide and photos.
Click to expand...
Click to collapse
It looks like theres a flat connector between rhe 2 pieces. Perhaps it is connected "backwards"? I will look into it on my "donar" phone and see if i can figure something out. Will post findings within a day or 2.
*Edit - check @jasonmerc's reply as well. Good thought!
jasonmerc said:
Maybe you can flip the digitizer 180°? I dont know if that would be possible (if the digitizer would even be able to fit in the phone the other way) but maybe it will work...
Click to expand...
Click to collapse
No that wouldn't work since the digitizer came with the double sided tape but thanks. The buttons also don't work and touch doesn't work at all with the phone laying flat
jran0880 said:
jasonmerc said:
Yeah, i dont recommend attempting cell phone disassembly while pearched on the "throne". Not judging! Just a personal decision on my part.
I wish i had the sense to know when to take that deep breath and calmly walk away. If i were in your shoes, the other 10 screws would be rounded out by now. There would be no accidental drop into the toilet, the phone would go down as the only l90 d415 to understand the meaning of swirly.... Wouldve made a great video though.
Click to expand...
Click to collapse
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
pre4speed said:
No that wouldn't work since the digitizer came with the double sided tape but thanks. The buttons also don't work and touch doesn't work at all with the phone laying flat
Click to expand...
Click to collapse
Hmm... Then there's gotta be some sort of manual screen calibration app out there. I'll look for one and post back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:41 PM ----------
I found a thread talking about how to calibrate the touch screen of a chinese android tablet. I haven't read it yet, so I personally don't know if this will work or not for the L90, and if they do the instructions you will have to follow will probably be way different when it comes to actually calibrating. Quickly looking at the thread it looks like one will need ADB and a computer to do this.
HERE IS THE LINK TO THE THREAD
I'd say hold off on doing this until I or someone more technically experienced can confirm that this would work. If you do want to give it a go, please realize you are proceeding at your own risk.
EDIT: Having read the thread, those values for the screen are going to be different for the L90 since the screen resolutions are different. We are going to have to find the values for the L90 and then invert the X axis values and that should solve your touch screen inversion (we are basically creating a double-inversion. Who says two wrongs don't make a right?)
Click to expand...
Click to collapse
jasonmerc said:
jran0880 said:
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
Hmm... Then there's gotta be some sort of manual screen calibration app out there. I'll look for one and post back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
---------- Post added at 05:14 PM ---------- Previous post was at 04:41 PM ----------
I found a thread talking about how to calibrate the touch screen of a chinese android tablet. I haven't read it yet, so I personally don't know if this will work or not for the L90, and if they do the instructions you will have to follow will probably be way different when it comes to actually calibrating. Quickly looking at the thread it looks like one will need ADB and a computer to do this.
HERE IS THE LINK TO THE THREAD
I'd say hold off on doing this until I or someone more technically experienced can confirm that this would work. If you do want to give it a go, please realize you are proceeding at your own risk.
EDIT: Having read the thread, those values for the screen are going to be different for the L90 since the screen resolutions are different. We are going to have to find the values for the L90 and then invert the X axis values and that should solve your touch screen inversion (we are basically creating a double-inversion. Who says two wrongs don't make a right?)
Click to expand...
Click to collapse
Figured out how to obtain th XY values for normal screen, if someone can figure out where modifications need to be made, Im thinking framework? The values for XY can be enabled in Developer Options - show touches and XY values. Turns out 10 taps to become a developer (its true cuz i read the toast) has other useful tools. I will decompile any suggestions related to touch screen calibration.
Brings back found memories of the famed L9 P769. It only took me 6 unintended 911 calls to reflash back to stock. Yep, 6! 5 with no sim. Took less than 2 seconds to pinpoint location on last few calls. 5 cars fully lit in my front yard and another 2 setting perimiter. Not once, but twice! Threat of jail made the choice to stop obvious.
"What are you in for?"
"I tried to unlock my bootloader." :cyclops:
Click to expand...
Click to collapse
jran0880 said:
jasonmerc said:
Figured out how to obtain th XY values for normal screen, if someone can figure out where modifications need to be made, Im thinking framework? The values for XY can be enabled in Developer Options - show touches and XY values. Turns out 10 taps to become a developer (its true cuz i read the toast) has other useful tools. I will decompile any suggestions related to touch screen calibration.
Brings back found memories of the famed L9 P769. It only took me 6 unintended 911 calls to reflash back to stock. Yep, 6! 5 with no sim. Took less than 2 seconds to pinpoint location on last few calls. 5 cars fully lit in my front yard and another 2 setting perimiter. Not once, but twice! Threat of jail made the choice to stop obvious.
"What are you in for?"
"I tried to unlock my bootloader." :cyclops:
Click to expand...
Click to collapse
I don't know, I think we just need to go to that file that is mentioned in the calibration thread, and whatever values are for the Y axis, just change them to a negative, since according to a video I saw of this issue with 3rd party digitizers in the L90 only the vertical axis is inverted (touch on the left side of the screen, and it registers on the right side). Of course, that is assuming that 0 on the vertical axis is in the middle of the screen. If not, then it will involve a little more math to get stuff right. Shouldn't be too difficult, though.
It's probably too late to suggest this now, but I believe GravityBox or some other Xposed module can remove the emergency call button from the lockscreen.
EDIT: Just checked the /data/data directory and I did not see any touchscreen calibration data folder. I did also read something about these Chinese android tablets coming with a TSCalibration2.apk (TouchScreenCalibration) program, so maybe you need to install that first before you can find the folder since that folder is probably the data for this app. I've had zero luck so far finding a download link for this file. Will report back if I find anything.
Sent from my LG-D415 using XDA Free mobile app
Click to expand...
Click to collapse
Truly appreciate all the work you are doing trying to help me out. I'm thinking its not going to be fixable. I would contact the seller and return the part, but return shipping to China would probably be more than the phone is even worth. I was even thinking to just put the original screen back on but the double sided tape is basically destroyed. It was only the LCD that was damaged in the sudden stop, the screen didn't crack at all.
pre4speed said:
truly appreciate all the work you are doing trying to help me out. I'm thinking its not going to be fixable. I would contact the seller and return the part, but return shipping to china would probably be more than the phone is even worth. I was even thinking to just put the original screen back on but the double sided tape is basically destroyed. It was only the lcd that was damaged in the sudden stop, the screen didn't crack at all.
Click to expand...
Click to collapse
I will be updating the OP to show FULL disassembly soon. I need to sort out the pictures and point out some things to watch out for as well as some DEFINATELY DON'T DO THIS items.
The parts that appear functional are availlable for donation, FREE of CHARGE (aside from the cost to ship via USPS flat rate box) to help another, less broken D415, continue life. The lcd assembly is yours if you'd like.
I will include a list of parts for donation in the OP.
Also, if you want to try tinkering around with the screen calibration, here is the TSCalibration2.apk (It is a system app from my VisualLand prestige 7L).
http://1drv.ms/1vrxBoX
Don't toss it to the curb just yet. And the double sided tape is WAY easier to fix than UV glue! Thank you LG for that. I'm seeing low priced OEM glass for the D415 starting to show up on eBay and amazon, as well.
And I still don't know what I'm dong wrong when I try inserting full pics instead of thumbs!
jasonmerc said:
jran0880 said:
Oh no, I'm not disassembling it there XD I'm doing it in my room. Just a bad joke on my part... With my luck, I'd have the digitizer laying half-off my desk, and I'd accidentally launch it in the air my hitting my hand on the part off the desk. It would then travel in the perfect arc to the bounce off the hallway wall, enter the restroom, and drop in the "throne" because the lid was left open.
I think some of the screws are actually a bit rounded off, but not to the point of not being able to work with them. That's part of the reason why I'm hesitant to proceed; I don't want to round them off completely because my screwdriver doesn't perfectly fit. I'd greatly appreciate if someone told me the exact screwdriver they used to disassemble this, and maybe where it was bought as well.
If all else fails and something breaks or the screws get rounded off completely, I'll grab a sledgehammer and finish it off. I'll even upload a video of it (and call it "How-To: Quick Disassembly of the L90")
Click to expand...
Click to collapse
*Slow Clapping*
Link to screwdriver I used:
http://www.homedepot.com/b/Tools-Ha...tt-hdx+4+in+1?Ntx=mode+matchpartialmax&NCNI-5
@whodisname likes the bit set in this post: http://forum.xda-developers.com/showpost.php?p=56592768&postcount=1037
Click to expand...
Click to collapse
jran0880 said:
I will be updating the OP to show FULL disassembly soon. I need to sort out the pictures and point out some things to watch out for as well as some DEFINATELY DON'T DO THIS items.
The parts that appear functional are availlable for donation, FREE of CHARGE (aside from the cost to ship via USPS flat rate box) to help another, less broken D415, continue life. The lcd assembly is yours if you'd like.
I will include a list of parts for donation in the OP.
View attachment 3024455
View attachment 3024456
Also, if you want to try tinkering around with the screen calibration, here is the TSCalibration2.apk (It is a system app from my VisualLand prestige 7L).
http://1drv.ms/1vrxBoX
Don't toss it to the curb just yet. And the double sided tape is WAY easier to fix than UV glue! Thank you LG for that. I'm seeing low priced OEM glass for the D415 starting to show up on eBay and amazon, as well.
And I still don't know what I'm dong wrong when I try inserting full pics instead of thumbs!
Click to expand...
Click to collapse
Thank you for the offer! That is very kind of you, however, the lcd seems to function fine. It's the touchscreen that is wonky. As for the pictures, I use tapatalk, so I only know how to insert via the app which is