Related
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
I'm in the market for one too. I would like to buy it as a christmas gift for my Boss.
doalittledanse said:
Can anyone recommend a suction cup mount that I can use in the car? It doesn't have to be made specifically for the MyTouch, I just want to be able to see the navigation while i drive instead of constantly looking down at my cup holder.
Click to expand...
Click to collapse
i third this!
I am using this one here:
http://www.amazon.com/Holder-T-Mobi..._1_3?ie=UTF8&s=wireless&qid=1259151227&sr=8-3
It gets the job done. The suction works just fine, have had no instances of it coming off, and my phone has never come out of the mount. The only thing is, be careful with the ratcheting mechanism... when I first got mine I forced it a bit hard without pressing in the release button, and now it doesn't always stay centered and skips teeth sometimes but still works.
It has an open space in the center of the bottom so you can still connect power/audio. It holds the phone well, has rubbery foam on the side arms to grip the phone. For $10 its worth it, IMHO.
Head over to your local large electronics retailer (Best Buy, Future Shop, Radio Shacketc) and look in the GPS and IPhone sections. I bet you could also order it through Amazon.
I have seen the same mount under multiple brand names there. It is around $30 in Canada, so figure $20sh in the US. The one I have is called the "Grip-iT" by Scosche. Allows the phone to be held vertically and horizontally, has a longer flexible neck to position it and a really strong suction cup mount. Also comes with an adhesive mount disk if you have to mount it that way (some places don't allow windshield mounts).
I use it mostly in a fullsized pickup with a stiff suspension and have had no problems with it coming loose.
The one I have is this one:
http://www.scosche.com/products/sfID1/337/sfID2/344/productID/1593
I would stay away from this one as it is a PITA (at least in my GMC truck, which has fairly standard air vents) to mount:
http://www.scosche.com/products/sfID1/210/sfID2/337/productID/1594
What ever you do don't buy the cheap Bell brand mp3/pda window mount kit. They are usually found in the discount stores like Wal-Mart, K-mart, etc. The clamp swivel is loose, it can't keep the phone up at a pleasant viewing angle. If you hit a good bump the phone shoots out from the poor grip and the clamp closing by the pressure of the spring. Ugh, pure garbage and a great way to get in a car accident.
Off both of what you guys found and use, are they universal?? Meaning as in, can I swap my sapphire with my g1 or other devices. I guess I should just be asking if the width is very adjustable and or can you change the angle from portrait to landscape easily?? Thanks guys. Just doing my research before I ask for one for x-mas
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
stillriza said:
I have been using this one for a few weeks now.. It's actually very sturdy and becuase its made specifically for our phones, it looks sooo much better and very smooth compared to the other universal ones.
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170391719566&ssPageName=STRK:MEWNX:IT
When you order, keep in mind it's coming from china..it took around 3 weeks to receive but well worth the wait.
It's sticks to the windshield like a champ and will not budge unless you use the release tab. Highley recommended for nav pruposes.
Click to expand...
Click to collapse
Thanks. That one looks pretty good. Just ordered it.
Awesome find... I just ordered one too. Thanks!
Hello,
Anyone know where i can get armband for the Dell streak, its hard to find one that fits 5" screen.
Thanks
LOL.....you are kidding aren't you?
dude......you need to go buy yourself an iphone so you dont go asking stupid questions like that around here again
I actually run in the mornings as well and have ALWAYS used my phone for my mp3 player when i do so, I would also like to know if anyone as found one.
My daughter would like to have her mp3 player back since i basically jacked it from her and wont give it back. Hers even has the micro sd slot so i can even listen ot my own tunes and i am not settled with her chick music crap. but it does not have blue tooth so i can use my stereo blue tooth headset that i have used for the past 3years. (i really got used to the no wire thing)
I also bike ride too and would love a way to strap it to my arm or somthing for that as well.
try a backpack... or one of those ancient things called a "fanny pack"
I suppose you could slip in under your sweat band...
I actually tried an old sweatband but it did not hold it very well. it would not even hold it accross the room.
joeclark said:
I actually tried an old sweatband but it did not hold it very well. it would not even hold it accross the room.
Click to expand...
Click to collapse
have you tried tucking it into your panties
...just a thought
The problem with waist band type holders when jogging is that area takes a lot of shocks from landing feet which I think is partly why arm bands were invented in the first place. The Streak is too big to fit comfortably on the arm though I'd have thought.
Take a look at skiing accessory suppliers - a lift pass holder might work if you can find one large enough.
Sent from my Dell Streak using XDA App
yea...i guess we will just have to wait till some company make one, till then we can't really use the streak while exercising.
Funny!
The funniest thread I've ever read!
yokuoh said:
Funny!
The funniest thread I've ever read!
Click to expand...
Click to collapse
couldnt agree more.
" oh man i love my new laptop, i just wish it came with a armband so i could surf the web while im running"
in all seriousness though. a wrist strap would be a better idea since the phone functions in landscape. now that sh*t would be scifi. hell all you need to sort that out would be a rubber skin and some black nylon straps
axninja said:
Hello,
Anyone know where i can get armband for the Dell streak, its hard to find one that fits 5" screen.
Thanks
Click to expand...
Click to collapse
Have you checked in to getting one of those new fangled MP3 players all the kids are raving about?
flumps said:
in all seriousness though. a wrist strap would be a better idea since the phone functions in landscape. now that sh*t would be scifi. hell all you need to sort that out would be a rubber skin and some black nylon straps
Click to expand...
Click to collapse
Now that I would get.
What you need is a Cell-mate, Google it. Would be perfect for your needs and you can do away with the silly wires too then
what a bunch of obnoxious arses people have become lately..
I think I'll join in as well!
I'd quite like an armband for my streak, and it doesn't look too big on me, but then I'm not a 15yr child like some of the posters here are behaving like!
I use mine while exercising, i use it everyday cycling to work. I've taken to keeping it in a rigid sunglasses holder and have a belt fitting for that, but its not ideal although mytracks and mixzing running over bluetooth. Mytracks voice announce feature is superb.
But for navigation I need a better solution as I need to see the screen.
I don't understand what the big deal is here. I would like an armband too. Sure, I could get an MP3 player, but why? The streak plays MP3's. In addition to that, wearing it on your upper arm would work just fine with the landscape format...just lift your arm up a bit (as if you were looking at your watch) and it should rotate so that you can read things normally.
I got this thing so it could satisfy as many of my needs as possible. Using it at the gym to track my workout and listen to music falls under that category.
i was begining to think i was the only one that honestly was interested in this (other than the original poster) Thanks for chiming in guys.
I also wouldn't mind getting an arm strap, as long as it was designed well and not just a pocket that then wraps around your arm cos the then it wouldn't sit on your arm properly and would eventually swivel, loosen and then fall off due to the gap (phone being wide and flat and your arm being round).
I currently use a waist pouch fanny pack p*ss bag (its yellow ) thingy along with my bluetooth headphones and it works perfectly for me at the mo but then again, I don't run on the treadmills so I wouldn't know how it would cope then (I either cycle or use the Xtrainer). Still, nothing wrong with wanting an arm strap!
I was looking through PSP accessories for goodies to maybe modify, but the PDAIR flip case should meet MY needs. Long wait for it to get here though.
Give the guy a break.
Try one of these. Not sure how well it does with the weight but I attach mine to a camel bak when mountain biking
http://www.aquapac.net/ukstore/large-waterproof-armband-case-br-212-1122-0.html
I also use a bluetooth head phones for music so it can be sealed in. if you stick with wired head phones then you can half seal it in an still be secured
http://www.jabra.com/Sites/Mobile/UK-UK/Products/pages/CatStereo.aspx
Sent from my Dell Streak using XDA App
Magnetic Trick #1
Okay, so you are loving that you can sling a football game to your new NC while snacking in the kitchen, but your are stumped.....where can you safely mount your nook? If you purchased a Industriell Easel Cover, then your problem is solved. It turns out that the magnet, built to hold the clasp in place, is a very strong rare earth type. So strong in fact, that you can mount the entire thing on the refrigerator door. I know it seems risky, but the mount is surprisingly firm. Now, I not suggesting you attempt with house full of drunken Super Bowl buddies, or lot of active refrigerator friendly little ones about; but for breakfast news viewing you might find it handy.
****note: Any metal surface will work, you could for example use the side of the refrigerator if you find the door too risky. Please whatever you do, don't use the oven.
Magnetic Trick #2
Still not sold on this versatile NC cover? Then check out this second horizontal or vertical mounting option. Take a metal bookend holder, the old school library type, with the cork or felt protective base. Bend the vertical tab to your favorite viewing angle, then slide it between the flap and back cover. The magnets stick to the bookend, the mount is extremely stable ,and it looks nice to!
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
OP thanks for solidifying my choice. I was on the fence before this idea of yours.
gedster314 said:
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
Click to expand...
Click to collapse
They didn't... .
I did it all from my Nookie...
The old classics
gedster314 said:
Very cool. Thanks for the info. Now if I only had a car from the 60's or older, this would make a perfect dash mount.
I shudder to think of driving an old car like that; drum brakes, metal rings on the steering wheel, no seat belts, metal dash and seats without head rests. How did people live though accidents?
Click to expand...
Click to collapse
It turns out that I have such a car, and old 66 mustang convertible, and I used to drive it, single bowl drum brakes and all, in Houston traffic! Yes, I was younger, yes I was very very, okay, extremely stupid, but the funny thing was the way other people reacted. I had driven an old 3/4 ton company truck and it was dog eat dog.....brutal Darwin style driving, but when I hit the road in the Mustang, the traffic parted like for the Red Sea for Moses. People would wave me in, if you've ever hazarded the Houston Interstate nightmare you can appreciate how incredible that is. It was an amazing experience. Hmmm, you've got me thinking now, I might have go see if that thing will stick to the dash...........
vizographic said:
Magnetic Trick #1
Okay, so you are loving that you can sling a football game to your new NC while snacking in the kitchen, but your are stumped.....where can you safely mount your nook? If you purchased a Industriell Easel Cover, then your problem is solved. It turns out that the magnet, built to hold the clasp in place, is a very strong rare earth type. So strong in fact, that you can mount the entire thing on the refrigerator door.
Click to expand...
Click to collapse
**** me, it works!
like magic
Croak said:
**** me, it works!
Click to expand...
Click to collapse
Yeah, that was my first reaction.
I told myself there was no way in hell I was spending 40 bucks on a case. And even though I have 0 plans to do what you mentioned, I still bought it.
OP, i hate you.
Glad to be of service
Main Target said:
I told myself there was no way in hell I was spending 40 bucks on a case. And even though I have 0 plans to do what you mentioned, I still bought it.
OP, i hate you.
Click to expand...
Click to collapse
Music to my ears
Very nice case! But how is this slinging of football games accomplished? Using a sling box?
Sent from my LogicPD Zoom2 using XDA App
slingbox
foethalove said:
Very nice case! But how is this slinging of football games accomplished? Using a sling box?
Sent from my LogicPD Zoom2 using XDA App
Click to expand...
Click to collapse
The Nook Color works well with my slingbox, I think I have an AV model. I can also confirm that it tethers to my captivate (froyo 2.2 rom) and slings over cell network.
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Hardrive Havoc
dawynkoop said:
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Click to expand...
Click to collapse
I'm kinda glad, the Nook Color doesn't have a compass.
dawynkoop said:
I almost learned about the magnet the hard way. Was home working on a computer and had my nook next to me with this case and just about set a hard drive down on top of it until I noticed all of the screws sticking together. I just figured the magnet was in the metal buckle and not the case. Never thought about sticking it to the fridge though. Tried it and it worked pretty well. THANKS!
Sent from my ROOTED Nook Color
Click to expand...
Click to collapse
I thought the same thing! until I noticed that It was sticking to the top of my car at an impossible angle. Then I realized that I had been setting it on top of my laptop to transport. My first thought "Oh crap!"
no damage, but I'll be more careful now. lol.
Times are a changing.
vizographic said:
I'm kinda glad, the Nook Color doesn't have a compass.
Click to expand...
Click to collapse
10equals2 said:
I thought the same thing! until I noticed that It was sticking to the top of my car at an impossible angle. Then I realized that I had been setting it on top of my laptop to transport. My first thought "Oh crap!"
no damage, but I'll be more careful now. lol.
Click to expand...
Click to collapse
Well, solid state drives are getting cheaper and faster every day. For that matter, I haven't used my venerable old laptop much since I fell in love rooting some nookie. If the recent breakthroughs in Bluetooth plays out I might have to retire the old girl.
Wow! I wonder how early BN opens...
very darn cool...I was trying to stomach getting the Lautner case, as I wanted it to look half descent but want portrait and landscape positions (landscape for airplane flights)...I may go with this...
Thanks to the OP...
I got my nook a week before my wife went into labor. When we were leaving the hospital I forgot my nook on the rook of our car. Our house is about 9 turns and 4 miles away with speeds from 40-60 mph. I got to about 1 mile away from home going 60 mph and I heard a thump. I looked in the rear view mirror and saw my nook on the spoiler. I stopped and everything was fine. I am betting the magnet helped the nook stay on top of our car and I am so thankful I got the case.
Bouncing Baby
Nice magnetic nook save and a new baby to boot. Heck a new baby is almost as nice as getting a new phone, even better because the baby will get continuous free upgrades for life. Samsung and HTC can't match that. All joking aside though,can you imagine how sad and primitive all Dads' hot technology will look to that little one twenty years hence? Well my best wishes to mommy, the little one......and congratulations to the new Dad!
I was planning on going to BN this morning to buy this case and use it with the book-end mod for landscape viewing, but then I found (and ordered) this:
It's under $20 and has 17 5-star reviews and 3 4-star reviews (out of 20 total reviews). There are also a couple of customer-contributed images of a Nook Color in a case sitting in it, in both portrait and landscape.
Hi jason, I saw that stand too and at the time I thought it might make a nice bedside stand. I went with the mag cover for the portability, the protective cover it would provide and, because of my poor impulse control..., the old "I have to have it right now". Its best feature, the magnetic component, was an unexpected bonus.
I'm still interested in how your stand performs, stability wise or, any such observations you might wish to share, once you take the plunge and get some user experiance.
Sent from my LogicPD Zoom2 using XDA App
Last night I got inspired (by the Netflix app ) to make a functional and nice looking stand. But instead of jumping in blindly with plexiglass or something I built a prototype out of cardboard.
I was thinking of making the final version a bit smaller so it fits nicer when vertical and maybe making a notch in it so the home button is accessible. Something I can't figure out how to fix is that the speaker is inside the stand when vertical. But other than that I'm really happy how this turned out and can't wait to make a final version.
Attached are some pictures of it holding the Nook horizontal and vertical. Any comments, ideas or questions would be appreciated. Thank you.
Not bad though if you are worried about the speaker it would be realy easy to rigup a pair of speakers with a 1/8" stereo jack on your final build
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
Ah phooey! I see the benefit of DIY. True, sometimes there are cheaper solutions out there. But this user's solution gave "me" many ideas for other devices, my wife's iPad, my Evo, Books! I like the ingenuity involved in the OP's solution. I'm going to make something like this out of plexiglass--the OP's idea. 1 sheet of pl (home depot), my jigsaw, some cement, buff the edges, felt the edges to protect the nook, rubber little feet (Rite Aid), listen to jazz while I'm making it and have a blast! $20. It's going to look a lot better than a little cheap rack holding holding up a nook. Nice going!
I agree, sometimes it's about the journey, not the destination.
michaelg1030 said:
Wouldnt it just be easier/cheaper to buy one of those stands?
Im all about making custom things, but in this case, I dont see the benfit of what you made versus this: http://www.amazon.com/Arkon-Portabl...VOOY/ref=sr_1_2?ie=UTF8&qid=1305477985&sr=8-2
Click to expand...
Click to collapse
I have one of these and, while it's great for my XOOM, it doesn't really fit the NC very well. It's OK for landscape but if you want your NC to stand in portrait while charging you have to put the stand on a book or the edge of a table to allow space for the cable. Actually I found this thread because I was looking for a better stand.
I definitely see the advantages of DIY to satisfy your own requirements. Good luck!
I use this case stand since I got my Nook Color in January. I see that now Amazon for fulfils the orders for it now. I had to wait two weeks back then but it was worth it. No excuses not to get it now.
http://www.amazon.com/rooCASE-Leath...3?s=electronics&ie=UTF8&qid=1306015551&sr=1-3
Get a good Bluetooth keyboard I actually bought the Apple one from Amazon and you're in heaven.
http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
So I received this today, it was selling for local sellers for $15+ but I found it from this seller for under $3 (inc shipping!), I couldn't justify the outrageous markup, and ordered from HK, came in 2 weeks. It comes with a plastic adhesive disk you can use to mount it to your dashboard. The phone holder part is connected to the mount using a really sturdy ball joint which basically allows quite a bit of freedom when adjusting the position of the phone.
I was hesitant because I've purchased other mounts before that were more expensive, and they either didn't stick as well as I liked, or were too loose, or didn't give me the flexability I wanted. For under $3 I'd figure I'd try it, and I'm glad I did. It is IMO the best mount I've used. It really sticks! On glass I had a hard time taking it off, and using the sticky disc on my dash, it's pretty much stuck there. Very low profile too! You are able to position it so I have the phone coming down over the vents.
It's very stable, I've taken it over speed bumps,and I do not have a soft riding car, and it's stuck, even some of these bumps causes my Garmin GPS mount to fall off the windshield sometimes!
I'll have to take some pictures, probably take some tomorrow and post them up.
[edit]Pictures are up
They are not the best pictures, it's really early in the morning here, taken from my garage, in my car, from the driver's seat using an DSLR and a large flash...very cumbersome...I adjusted the settings to have the flash bounce off everything as minimal as possible.
I positioned the mount so where the phone sits is in front of vents for VERY easy access to the phone, (putting it on the windshield makes it too far to use), useful for navigating, or passenger music selection. The holder (where the phone sits) can be rotated 360 degrees, so I could have the phone in portrait instead of landscape. To be able to place the phone in front of the vents was the major reason for buying this mount, it's where I want my phone to be. Oh and it doesn't block the vents (at least that much) as you can still position them, potentially an issue for passengers in the rear though...
I wonder if they have improved it. my experience with this mount in the past was it wouldn't hold the weigjt of the phone.
glad to know it's working!
Sent from my SPH-L900 using xda app-developers app
Without the adhesive disk, the mount won't really hold to the dashboard or a wooden desk with the note 2...but will attach to glass and hold and hold and hold. It holds on to the adhesive disk the same as it holds onto glass.
thank you for sharing..
Tried one of these (DIFFERENT SUCTION CUP TYPE CAR MOUNT) with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!
one80oneday said:
Tried one of these with my N7 and a few seconds later BAM! it hit the floor really hard. Not gonna try this again especially with my GN2!
Click to expand...
Click to collapse
I don't think this mount can even hold the size of the N7..pretty much the width of the Note 2 is the largest you can go with this mount...not even sure how you got a nexus 7 on it.
Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app
alterstill said:
Did he not mean Nokia N7?
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.
one80oneday said:
I meant my Nike N7 Zoom KD IV, duh
Anyway alls I'm saying is that I don't trust these type of mounts.
Click to expand...
Click to collapse
Lol @ nikes.
I didn't like suction cup mounts either (esp because the OEM garmin one I have falls off regularly...and I've tried others that have failed as well...and I don't like the vent ones because 1) they don't like my vents 2) they prevent the vent from being adjusted...this is the only one I've used that really works (YMMV) but for under $3 it's not much of a gamble.
would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
right now I am using a igrip (you can get them oem for $13) the nice german made ones.
its positive release (bad) but it holds nicely and the note ii in case is so wide it BECOMES a positive hold since you have to force the note ii into it to make it fit but the result is its VERY secure and I love the arm and mount.
Here is the igrip in the minivan
would love to see some pics of your note II in this holder you linked too !
Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Sent from my SCH-I605 using Tapatalk 2
nerys71 said:
would like to see pictures of this with note ii it does NOT look very secure.
it is positive hold or positive release? how much wider can it go (picture with note two and arms spread wide as possible? (ie can I put note ii in a case ?)
would love to see some pics of your note II in this holder you linked too !
Click to expand...
Click to collapse
Not sure what you mean about positive hold or positive release...but it's a spring loaded clamp and you have to pull on it to fit the note 2 in, and it clamps on the note 2, I have a TPU case (S-curve, which is another under $3 you can find on ebay, and IMO it's the best plain TPU case i've used as well, and I've spent lots of money on cases in the past, it's got good grip, more rigid than other TPU cases, and is soft enough to absorb shocks...back on topic)
Dakota0206 said:
Its $2.85 US. He isnt reviewing a $30 mount. If you dont like it or, dont trust it, move on.
IMO less than $3 isnt much of a gamble. If you own a Note 2 you shouldnt be sweating $3. If you are, well getting a note 2 was a much worse financial decision than buying a $3 car mount.
Click to expand...
Click to collapse
I've used plenty of expensive mounts in the past, and I live in Australia a country where stores have very poor return policies and seriously I love this mount the most because of the ways you can position it, but I only have it in one position because that's where actually want it.
Pictures are in the first post as attachments
Dakota. OFF the caffeine. Now go sit in the corner dill the DT's wear off and come back when your normal again and its not about the price its about the 3 weeks shipping time to "find out" when a couple questions can possibly save me 3 weeks waiting
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!
nerys71 said:
D
Daemos. I am not sure HOW I missed that picture. VERY slick and low profile looking. Does it open any wider? ie as wide as it goes how much gap is their (I have a pretty thick case around my note II)
how does it hold up in portrait ?
positive hold is where you have to force the arms apart and it clamps down naturally on the phone IE its always trying to "squeeze" the phone.
positive release is like the one in my picture. you press a button and it snaps open you then compress the arms onto your phone. its always trying to OPEN the arms (positive release) an gears inside "lock" it onto your phone.
when you BUMP a positive hold nothing happens most times. if you bump a positive release enough to "trip" the mechanism or jump gears it "releases" your phone since its always trying to OPEN and well there goes your $650 Note II
thats the difference between positive hold and positive release. if by pull on it that means you have to OPEN the arms to get the phone in (ie its trying to close on you) thats GOOD that is positive hold.
Might have to order me a couple of these to play with I REALLY love how "low profile" it is. might be a good camera mount too !!
Click to expand...
Click to collapse
Oh I just posted the pictures! Lol! You didn't miss anything
And yes it is Positive hold, very strong hold.
I will test the mount more thoroughly later and report back.
Looks good, and at least I know it will fit nicely in my Subaru
Sent from my GT-N7100 using xda app-developers app
ahh good thought I was going whacky there
good, strong hold is very good be sure to see how much more "room" it has for something bigger (if thats not already the max) ie can it go half inch biggger etc..
the problem with expensive mounts is they are actually $3 mounts designed well with good quality control.
SO if you can find the cheap mount with the same good design .....
problem with my igrip I pictures is that you have to FORCE the note II into the mount with case. with plastic style cases not an issue but lately I am loving the wood bamboo cases I got. the igrip scratches them (them arm wings have plastic LIPS that you have to "get past" to put it in and take it out. this is good since that keeps the phone from falling out forward. but since I am slightly over what its designed to hold these lips TOUCH the case in insertion and remove with some force ie scratching the wood.
so I am looking for alternatives
Daemos said:
http://www.ebay.com.au/itm/Universa...AU_MobilePhoneAccessories&hash=item1c2ab9d685
Click to expand...
Click to collapse
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.
The bad thing about the vent mounts is that, depending on the design, the phone usually blocks airflow to the driver or passenger and if the heat is on this heats up the phone generally depending on whether or not the vent can be completely shut off.
Shady Gambino said:
This looks like a Chinese knockoff of an iOttie mount:
If you feel comfortable buying Chinese counterfeit stuff, then go ahead. Just letting people know.
Click to expand...
Click to collapse
I'm 100% sure it's not a iottie design, as I've seen this exact same mount sold under different brand names (BBM in South Korea). There are times (many times esp for low cost items) where Chinese factories design the mounts/products, pitch them to different clients, who then apply their own branding for their specific market/region.
So...in the end they pay even less than what you'd pay on ebay...but charge you way more. So if you are happy getting ripped off by companies who charge lots of money for very little innovation...go for it.
To answer questions:
The width of the note 2 + my case seems to be the mounts physical limit for opening.
In portrait it holds just as good as landscape.
However, I have found if you use the mount as shown in the iottie, it seems firm, but not as stable as the position I have, but I don't plan to use it that way as the other way works better for me.