Database Develop

[HELP]cmd adb error msg...

I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!

SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better

I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum

Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!

SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?

This IS in the wrong forum.
Moved.

Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.

SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.

Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?

ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...

And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )

the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb

The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.

virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that

Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,

I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis

ADB not showing up??

Sorry guys, I am new here and am having a problem getting ubuntu to work on my NC. I am trying to get it to boot using adb but it will not show up on my PC. I have tried 3 different PCs (2 win7 64bit and 1 vista 32bit), installed the nook drivers but it will never show up in the command prompt. I have tried enabling and disabling development mode and I disabled USB mount. I don't know what else to try. I am on 1.1.0 of the system software if that matters. I got ubuntu to work once using terminal emulator but am having problems getting the script to work. But my main objective is getting adb to see my nook. If you could help, I'd appreciate it. Thanks

I dont follow you very well, what's your problem? Your PC doesn't see NC or something else?
Sent from my HTC Vision using XDA App

ADB does not see it is what I'm saying. I will say that I am not using the stock USB cable that came with the nook as I don't have that cable anymore. Could it be that the cable I'm using doesn't work properly? It see's everything fine when I tell it to mount the SD card. I just using a froyo card in it and adb saw it although it said offline. Could the cable be a reason why it wouldn't work?

It's possible, but not likely as I am using diiferent cable for communication between PC and NC all the time... My original is connected to a charger from the purchase of NC...

did you install the right drivers for it? It depends which OS flavor you have on your nook. Honeycomb uses different drivers vs Froyo

edein said:
did you install the right drivers for it? It depends which OS flavor you have on your nook. Honeycomb uses different drivers vs Froyo
Click to expand...
Click to collapse
I'm having the same issues. I'm on a Windows 7 Box and I can not see the NC.
In Device Drivers under <Other> I find the NC but the driver is invalid. I have DL'ed the Android SDK with the USB drivers and I have tried pointing to the driver manualy. No Joy.
Any Help would be greatly apreciated.
TY
-NJ

have you tried this? http://forum.xda-developers.com/showthread.php?t=882751 ...run the .bat and follow it's instructions.
Also: it's very important that you reboot your Nook at least once after your first OS installation.

[Q] Need a little help with ADB on honeycomb

Hey guys, Im sure this is on here, I just cant seem to find it. Im running HC v4 on a SD card and when I try to ADB into it to install the market ADB doesnt see the device. I have usb debugging turned on, and ADB worked on my stock rom. Any suggestions?

Search for the nook color usb drivers on google. That worked for me at the following thread here on XDA: "[SCRIPT] Nook Color USB Drivers and ADB Setup (WinXP&7)"

I just worked through this the other day in my honeycomb .03 rooted nook. Follow the detailed directions on nookdevs (search "nookdevs: nook usb drivers"). Make sure you are admin on a windows PC while you do this. One other detail is to make sure to install the honeycomb labeled items in the SDK tool. You may not need them but they are in there so you might as well.

Are drivers always the cluprit?
I've been having similar problems with ADB not seeing my Nook. I did root it (Autonooter 3.0) and verified that USB Debugging shows to be on...and then downloaded the ADB set I found on XDA-Dev that had the full zip (adb and all) and another with just the USB drivers. But issuing the ADB command to list the devices found it still shows nothing in the list.
Are the right Nook USB drivers always the problem, since that seems to be the one thing everyone suggests trying/changing?
My ADB install never did try to use Windows Update to search for drivers (which we were warned about), and just to be safe I reran the second file to reinstall just the drivers. But at this point I'm at a loss what to try. So if it's invariably a problem with the USB drivers, well, I'm looking for pointers on a next step.
Thanks,
JTT

I am having this issue too, but USB drivers for Windows can't possibly apply as I'm running Snow Leopard (Mac OS X 10.6).
I'm guessing it has something to do with the version of ADB I'm running but I just did a fresh install of the SDK release 10, so I doubt that that is it too unless there is a particular ADB I need for Honeycomb?
Any help would be appreciated.

Guys try the same over wifi. Linky

try going into cwm recovery, go to "mounts and backups", and click the first option "mount system". then plug in the NC and, in a command prompt on the computer/laptop, kill the server, restart the server and look for devices again. also, make sure no other adb devices are connected to your computer/laptop (i.e. your phone)
i followed the directions on nook devs (mentioned above by bike4food) and all was like it said it should be by the end. unfortunately, the laptop still wasn't recognizing my NC. when i mounted the system like i described above, it recognized it.
good luck!

[Q] Nook, ADB problems

For some reason my nook won't show up in windows 7 device manager as anything but a storage device (both the nook and sdcard). It doesn't show up under "other hardware" like all the tutorials show. I am at a loss?
Should I reset my device (unroot, wipe clean, etc)? And try again or am I missing something.
I am looking to get ad hoc working and am stuck in the mud

Depending on what ROM you're running... you may need to go into nook color tools and toggle usb debugging mode... it is a known issue in some ROMs....
You may also need to edit %userprofile$\.android\adb_usb.ini so the only line in it is:
0x2080

anyone have problems in ubuntu 10.04 can't get it :'(

I figuered it might be that I had tried some different kerenels recently. I did eventually return to stock. I have toggled debugging mode to no avail.
I will follow the other instructions you provided and if all else fails wipe her clean and try that.
Thanks.
Sent from my rooted nook color using Tapatalk

I have the same problem and am using the stock kernal. I have even tried two different computers (one with Win 7 and the other with XP) and get the same result. The first time it I tried with XP it showed "NookColor" under Other Devices with a ? mark. In just a second, it reloaded Device Manager and would never showed up again. I have tried all suggestions including the USB Debugging toggle with no positive results. By the way, I rooted using auto-nooter 3.0 for Nook Version 1.1. Everything seems to work well and I am using ADW Laucher EX. I am familiar with ADB as I used it root my Motorola Droid. In that case, I had no problems with it seeing my Droid.
Any suggestions would be helpful. I also have Ubuntu on a test computer that I may try if no solutions are found.

[email protected] said:
anyone have problems in ubuntu 10.04 can't get it :'(
Click to expand...
Click to collapse
I had the same issue in Ubuntu 10.04. My Evo would show up fine. My NookColor I could not get to show up though. No matter what I tried (I tried all the walk throughs on forums, Nookdevs.com, etc).
I finally just gave up. I've just been moving APK's from my Evo to my Nook to install them. There are many other things I'd wish to do through ADB other then install apps though so I may give it another shot sometime soon.

If it worked in some ROM versions and not in others... you need to check the device ID in windows device manager... get the PID for the device listed.... then you will need to add the device PID to the .inf file for the drivers so it will know to use the drivers that work for the "new" device (not really new.. just HWID change in some new kernels/ROMs

I had a world of trouble getting getting my computer to recognize the nook so that ADB would recognize the device. I mean HOURS of debugging.
However.. good news!... The answer that can help you is...: screw it and just download adbwireless app. All you do is run the app while connected to your home network and then on your computer run the the command "adb connect 192.168.1.xxx:5555" and you are connected and can run adb just like you were USB'd up
I hope this helps

Recommend installing the easy ADB install for Windows from the developers forum.
On Win7, sometimes you need to force the driver to use "USB Composite device" or "Android composite USB device", even after doing the easy ADB installer above.

Managed to get ADB working after Autonooker 3.0, Nook 1.1
Hi, All,
I had similar problems. I managed after a bit of fuss on my mac to get ADB up and running.
The main problem seemed to be getting USB debugging working. I went into nook color tools, from ADW launcher. I went to All Settings : Development, and saw that USB debugging was checked, but I didn't believe it was running.
So, I unchecked both Auto Mount (to simplify what the heck was going on over USB) and USB debugging, and hit back, to save the settings. Then I went back into debugging, and re-checked USB debugging.
Then, I made sure that ~/.android/adb_usb.ini contained the line:
0x2080
I killed the adb server and restarted it, and voila, ADB.
Hope this helps some folks.
Dave

I am in the same boat, adb works fine on my other android device, but won't see my nook for anything.
I have tried every permutation I have seen of the rules file, still nothing.

[Q] ADB Problems installing on W7x64 (Composite Driver wont show)

HI,
I've had success installing my other android devices on my windows 7 x64 computer, have even used my (ADB) Nook Colour on a windows 7 32Bit laptop fine.
Problem: Android Composite ADB Driver wont install/ isn't found, Device is Auto Nootered on 1.1 using rooted stock firmware.
Tried:
I have the .android folder in my user profile dir with the device ID in it
Followed various wikis and guides (that worked for the 32Bit version)
Watched the driver load/unload in device manager as I tick 'Development Mode (enable ADB)'
Tried various driver packs from here and googles latest offering, still only matches up with Android ADB Driver not the Composite (wont even show me the composite one)
Wireless ADB works and is disabled, worried about installing CWM using wireless for some reason USB feels safer to me
Thinks I noticed:
Hardware ID is listed as USB\VID_2080&PID_0002 which matchs up with %SingleAdbInterface% in the ini file for the driver, composite aka %CompositeAdbInterface% has &MI_01 on the end. Not sure if that means its not getting the right hardware ID from the device when ADB/ Development mode is enabled of if having the wrong driver loaded on it shows up the wrong Hardware ID.
Things I havent tried, enabling ADB on the Nook using sqlite3 method, but if it works on another coputer didn't think it would be a good idea.
Plan:
Install CWM, flash CM7 or similar to device.

I had the same issues with Windows 7 64-bit and never got it working. Worked fine on my WinXP laptop at work though. If you find a solution I would be happy to hear it, but to be honest I have found I haven't really needed ADB much if at all.

ouldsmobile said:
I had the same issues with Windows 7 64-bit and never got it working. Worked fine on my WinXP laptop at work though. If you find a solution I would be happy to hear it, but to be honest I have found I haven't really needed ADB much if at all.
Click to expand...
Click to collapse
Same here!

This one is weird...
I'm on win7x64 and I *have* got adb to work at times. When I was first rooting my new NC (1.1.0), I fiddled with it and I had it running over usb fine. But now, when I plug in the usb and I either get that the device is unrecognized or it goes into usb sync mode. Haven't quite figured that out...
But, ultimately, I just use adb wireless for any adb stuff, although it's "not recommended". It's worked perfect for me all along.

Check this link
http://forum.xda-developers.com/showthread.php?t=987409
i posted it a few days ago. If it works for you please recommend for being pushed up and add to the linked post that it worked.

loupnook said:
http://forum.xda-developers.com/showthread.php?t=987409
i posted it a few days ago. If it works for you please recommend for being pushed up and add to the linked post that it worked.
Click to expand...
Click to collapse
OMFG dood!!!!! it fixed mine, my win 7 x64 i could not get to stop installing the drivers, i tried every trick the internet has and it would always reinstall the drivers instantly, i added the stuff to my .ini file and i disconnected and reconnected nook and BAM!!! adb devices showed it, and adb shell worked, and now its reconnecting every time!!!
now to get that darn usb auto mount to stop permanently

UR Welcome and USB Automount?
NewZJ said:
OMFG dood!!!!! it fixed mine, my win 7 x64 i could not get to stop installing the drivers, i tried every trick the internet has and it would always reinstall the drivers instantly, i added the stuff to my .ini file and i disconnected and reconnected nook and BAM!!! adb devices showed it, and adb shell worked, and now its reconnecting every time!!!
now to get that darn usb auto mount to stop permanently
Click to expand...
Click to collapse
Glad to help. What do you mean USB Auto Mount? I kind of thought that should happen?
My goal for getting adb working was to get su, which i got here http://forum.xda-developers.com/showthread.php?t=953110 with a bit of trouble but seems to work, so that i could drag items from my pc onto HC. I'm using http://forum.xda-developers.com/showthread.php?t=952456 to mount the media directory. I now seem to have su installed and the USM app is working. i only see my BN media directory from my pc now (yay) but i can't browse that directory from my nook HC (boo). So i can't share files between eggclair and HC. I'm a noob to nook and newbe to linux, so i'm assuming it is a permissions issue but don't have enough knowledge on how to change them yet.
I've installed DropBox but it keeps asking for an SD card, which isn't a big issue, just i haven't found the time to go buy one. Is there a way to use db without an SD card?

unfortunately no, db requires external storage. if you opened the apk to recode its default directory maybe but im not sure its possible
usb auto mount I can disable in nook tools but its a persistant system that defaults every reboot, I dont like to see it popup while using the nook when I plug it in just one of many peeves

Things I noticed:
In the Driver ini it states &MI_01 means composite driver is installed.
Under Hardware ID I only get :
USB\VID_2080&PID_0002&REV_0216
USB\VID_2080&PID_0002
This leads me to believe that even though the box is ticked on my nootered Nook that its not really enabling ADB on the device (then maybe it would show &MI_01 as needed?)
Going to flash a new firmware.... maybe Froyo and see if it comes up right after that.

GateheaD said:
Things I noticed:
In the Driver ini it states &MI_01 means composite driver is installed.
Under Hardware ID I only get :
USB\VID_2080&PID_0002&REV_0216
USB\VID_2080&PID_0002
This leads me to believe that even though the box is ticked on my nootered Nook that its not really enabling ADB on the device (then maybe it would show &MI_01 as needed?)
Going to flash a new firmware.... maybe Froyo and see if it comes up right after that.
Click to expand...
Click to collapse
I thought that as well and flashed back to the EC 1.0.1, sideloaded 1.1 update and repartitioned, used cw to add HC back and all that, and still had the same issue. Came down to the ini file not having a NookColor section.
Did you check the link http://forum.xda-developers.com/showthread.php?t=987409

I'm no stranger to drivers, I could force it to use the driver by changing the ini files but it still wouldn't appear in ADB Devices.
Flashed Nooky FroYo and now the device driver states the hardware ID has the missing '&MI_01' which means the composite driver works out of the box.

I used IOMonsters Easy USB installer and it seems to have installed the drivers for Windows 7 64Bit Fine
After running the install .exe I also had to execute the Inst64.exe