[Q]help moto milestone open recovery - Motorola Droid and Milestone General

help not able to install open recovery on moto milestone plz help and if possible give further instructions to install cm7

anshsahajpal said:
help not able to install open recovery on moto milestone plz help and if possible give further instructions to install cm7
Click to expand...
Click to collapse
What is not working? Did you follow the instructions that are stickied in the dev section (how to install custom recovery, roms, etc)
Sent from my Milestone using Tapatalk

yes mate i did followed instruction properly
when i flashed vulerable recovery.sbf using rsd lite the process was successful but when i tried to go to recovery mode the custome recovery didint ran and i was having the normal recovery mode..i think that the sbf file i flashed was not the one i need?? plz help mate i have trashed my milestone even further need to install custom mod like anything

It happened with me too. You do this-go to androinani (might be spelled wrong) page on xda developers, its in motorola milestone android development and then download open recovery from there. Then connect phone to your pc and first extract files from the .zip you just downloaded and then put them in your sdcard. Then boot into normal recovery and press apply update.zip.
See if this works. I had the same problem but now I don't have it.
Note that you download open recovery from the website given on the androidaini page only and then try.
If you have any further problems PM me.
Sent from my Milestone using XDA App

Ahhh thnx bud...i figured out the problem....bootloader 90.78 needs a new revovery.sbf patched eith ramdld 90.78 nyways no m on cm6 finsll

Related

[Q] Help to backup/install ROM for Milestone using ROM Manager

I rooted my Motorola Milestone with Super One Click, then installed ROM Manager. I did flash CockworkMod recoveries but I could not do the backup or installation of new Custom ROM. The phone always was back to the screen with the yellow exclamation inside the white triangle. If I use VOlume + Up button, it will appear the recoeveries with four options: reboot system, wipe data/factory reset, apply update.zip and wipre card partition with the info: E:cannot open cach/recoveries/command. I did try to apply updated.zip but it failed and say that it cannot verify the signature and installation aborted.
Could you please help? Thanks
Phone: Milestone rooted with android 2.2
Root: by Super Once Click
ROM manager: newest version
hwithv said:
I rooted my Motorola Milestone with Super One Click, then installed ROM Manager. I did flash CockworkMod recoveries but I could not do the backup or installation of new Custom ROM. The phone always was back to the screen with the yellow exclamation inside the white triangle. If I use VOlume + Up button, it will appear the recoeveries with four options: reboot system, wipe data/factory reset, apply update.zip and wipre card partition with the info: E:cannot open cach/recoveries/command. I did try to apply updated.zip but it failed and say that it cannot verify the signature and installation aborted.
Could you please help? Thanks
Phone: Milestone rooted with android 2.2
Root: by Super Once Click
ROM manager: newest version
Click to expand...
Click to collapse
Dude, ROM Manager does NOT work on Milestone. You need to flash a Vulnerable Recovery using RSD Lite, install Androidiani Open Recovery, go from there:
http://forum.xda-developers.com/showthread.php?t=983516
skadude66 said:
Dude, ROM Manager does NOT work on Milestone. You need to flash a Vulnerable Recovery using RSD Lite, install Androidiani Open Recovery, go from there:
http://forum.xda-developers.com/showthread.php?t=983516
Click to expand...
Click to collapse
Thanks, dude. In the list of ClcokwordMOd, i find out there is a row for Milestone. Click on it, I also am able to download a file of Recoveries which is specific for milestone. But it does not work.
One thing I would like to raise here is that after i cannot use update.zip any more. Cuold you please explain why? It also says "cannot verify signature"
Thanks
Because your phone does not have the vulnerable recovery installed. Look at the link I posted. It has everything you need to get up and running. Don't hesitate to ask if you have any questions.
Sent from my Milestone using XDA Premium App
I did do as your instruction. But as i did the backup, it is stuck. the phone went to "system:dumping..." and stayed there in one hour.
I flashed the recoveries sucessfully. please advise
hwithv said:
Thanks, dude. In the list of ClcokwordMOd, i find out there is a row for Milestone. Click on it, I also am able to download a file of Recoveries which is specific for milestone. But it does not work.
One thing I would like to raise here is that after i cannot use update.zip any more. Cuold you please explain why? It also says "cannot verify signature"
Thanks
Click to expand...
Click to collapse
The Milestone mentioned in ROM Manager / clockworkmod is probably the Alltel Milestone, which in reality is a droid 1.
Now that you have installed cwm, you have to remove it from your phone and then install Androidiani openrecovery. Before that you need to install vulnerable recovery from here using rsdlite.
Note that it may take more than one try to get cwm out of the system.
hwithv said:
I did do as your instruction. But as i did the backup, it is stuck. the phone went to "system:dumping..." and stayed there in one hour.
I flashed the recoveries sucessfully. please advise
Click to expand...
Click to collapse
What did you end up doing after it hung for an hour? Because if you haven't flashed a custom ROM, you should still be able to boot (rooted) and you can try the Nandroid backup again.
Sent from my Milestone using XDA Premium App
skadude66 said:
What did you end up doing after it hung for an hour? Because if you haven't flashed a custom ROM, you should still be able to boot (rooted) and you can try the Nandroid backup again.
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
I take the batterry out of the phone and restart it again. It works normally but the backup is not done because i do not find out the backup under Openrecoveries folder. I did try the second time but it happed again and i had to take the battery out of the phone and restart.
please help
I actually had the same mistake as you before (using ROM Manager on our Milestone).
I recommend this:
1. Backup your SD card content
2. Reformat your SD (slow format)
3. Place the AOR 3.3 (Androidiani Open Recovery) files back in (use a fresh download if possible)
4. Perform Nandroid backup again
Note that there will be no "backup" content in your OR folder. Instead, you will see a new "nandroid" folder in your sd root.
Thanks dude. I find out the solution. I wipe all data + cache, then I download a fresh recoveries and then i did the backup again. It works well.
CWM problems
I used androidiani and flashed cm7. then i tried ROM manager while i was unaware that it messes with the milestone. now i cant enter recovery at all!!!! Help!
lspdv1991 said:
I used androidiani and flashed cm7. then i tried ROM manager while i was unaware that it messes with the milestone. now i cant enter recovery at all!!!! Help!
Click to expand...
Click to collapse
You have to flash vulnerable recovery again from here.
lspdv1991 said:
I used androidiani and flashed cm7. then i tried ROM manager while i was unaware that it messes with the milestone. now i cant enter recovery at all!!!! Help!
Click to expand...
Click to collapse
You should not use ROM Manager to do the backup or flash for Milestone. please use Open Recovery 3.3. Download it and please delete CWM folder also. Please wipe data/facotry reset for doing backup or flash. (IMPORTANT). It will work.

[Q] Wellcom A99 booting stuck on welcome screen page

I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Now restore or install any ROM.
Napstar said:
I am not sure about what ROM manager did to your device, but I guess you are stuck on boot splash screen.
And I guess you will be still able to get in recovery mode.
(Just pull your battery and replace it if you are stuck on splash screen.)
When your device is turned off, press Vol UP + Vol DOWN and then press Power button - keep all of them pressed till you sense long vibration (Usual way to get in recovery mode)
Now restore or install any ROM.
Post your experience.
Click to expand...
Click to collapse
Now it would sound so silly to you Napstar, but I have to accept it that I don't know how and I dont want to take a wrong direction. Since I'm very new to this, can you help guiding me on how to install ROMs. Yes, you are right I can still get into recovery mode, but I just don't know how to continue and where I can get all those ROMs. Please bear with me.
Thank you, Pitt.
just go to android development section and look at the beginner guide its easy don't worry
pittms said:
I am really in need of help about Huawei ideos X6 (Wellcom A99 - Thailand).
Yesterday I tried to install CWM v.5, root Wellcom A99,using CWM Recovery v.5.0.2.3(refer to this method at http://forum.xda-developers.com/showthread.php?t=1278027), and it's done successfully as CWM message notice. after i reboot to os, everything seemed fine untill I used ROM Manager (ROM Manager App) to change something just for my experiment such as change fonts, themes, the ROM Manager App required me to reboot the system to apply changes.When I rebooted the system, it's stuck on the first page screen (wellcom welcome screen)and now no matter I tried to reboot, battery out and anything, it wont go nowhere. Please someone provide me with the solution and process. Thank you very much for those who will try to help me out about my Wellcom A99. I'm in need of your advice.
Please help. Thank you very much.
Pit
Click to expand...
Click to collapse
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
need guide to install ROMs
kshitij_bhatt said:
okk the thing which is done lets forget it let it gone be by gone.. and now if u want to install roms.. jst look out over the forum for ideos x6 and u will find all the roms including customs and the official once
jst download and one which u want to use .. ok u have said that u have installed cwm recovery that good,... bt do install the napstar's dual boot recovery which allows u to go to stock and custom rom as u select ...
now regarding rom... u jst cant put anyrom on ur phone it must be for ur phone ... dont worry wellcom a99 came with too many different names so here what roms u find are mostly suits all of them... jst go to the thread ... select the one that best suits u ... do read user comments so u could know whether its fully functioning or not.. dont worry some day everyone is new....
Click to expand...
Click to collapse
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
pittms said:
Ok, now this is the one that I like to use (UC-Kernel_v3.0.0.2_CM_7.1.0_signed and DoomKernel_v3_signed)= I can use one of these ROMs for my Wellcom A99 right?. I already downloaded it to my PC but i have no idea how to install it into my Wellcom A99. As you intructed above, I also installed the napstar's dual boot recovery in my A99. So now, downloaded ROMs are in my PC and I just need an instruction to install it to my A99. Please help me do this.. Thank you.
Pitt
Click to expand...
Click to collapse
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
take A99 from here : https://www.sugarsync.com/share/ddhcyiw66cyqt
do as i mentioned above and ud be ok
haree said:
hi
1. download the A99 rom extract to ur PC and rename it to firmware.nb0
place it on the root of ur SD
2. u need to use only stock recovery not CWM go to the menu download fbo and click on it and u will get ur A99 on ur SD flashed
to my knowledge i repeat u cannot use CWM to flash A99 u need to flash via stock recovery or SUTL
do as i mentioned above and ud be ok
Click to expand...
Click to collapse
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
okk now u got it all wrong/// uc kernals are NOT ROMS u need to download the .zip file for them and copy to sd card reboot into cwm recovery and install zip from sd card
u are getting it all wrong these are Not roms these are kernals ./... and i will suggest u not to install as i can see its a heavy thing and u r not familiar with kernals and roms...
first of all u need to download software update tool
then u need stock firmware which u could find here
mostly all the files u need are available HERE
pittms said:
how can i put this in my SD card? I renamed boot.img to firmware.nb0, is that correct? can you provide me intruction step by step please. sorry, i'm not so expert about this.
Pitt
Click to expand...
Click to collapse
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
haree said:
hi
dear im totally confused in what u want
what do u want to do
1. do u want to flash A99 Rom
then do as i have mentioned
2.do u want to flash OC kernal(this is a kernal not a ROM)
then u need to add CWM to ur phone if u have an official ROM
then u also need to ROOT it and then u need to flash uc kernal via CWM
hope this is clear enough, u need to realy explain what u want in detail for u get help
Click to expand...
Click to collapse
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
pittms said:
Thank you for all hands, I just need to get my phone back to work by installing ROM into Huawei Wellcome A99 as I was instructed above post but I just dont know how and i just need somebody to guide me step by step. At the moment, my phone is stuck only on splash page (welcome scree) and it goes nowhere. I have CWM inside so anyone just helps me please.
Pitt
Click to expand...
Click to collapse
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
Which recovery version are you using?
CWM v5.0.2.3 has an option for mounting sdcard as USB device.
Boot into recovery
Connect your device to PC via USB
Option mount and storage >> mount USB storae
Stay in that menu till you want to use your sdcard (for copying files)
If you have recovery menu v2.
Choose CWM recovery first and do nb0 file copying by following above instructions.
Then reboot into recovery (advanced >> reboot recovery)
Choose stock recovery and choose install firmware.nb0 option.
If this gives any errors post it here. Someone amongst us will surely help you.
Best of luck!
pittms said:
I have downloaded ROM for A99 extracted it on my PC and renamed it to firmware.nb0. How can i put it in my SD on phone?
Click to expand...
Click to collapse
hi
i dont get it
1. is ur USB cable not working
if working then all u need to do is connect ur phone to pc and copy the fbo to root of sd and do the flash
2. u can do Napsters method
3. if u have a Sd adapter then use it and copy the Fb0 to root of sd and do the needfull
goodluck
Now it is back to work again. Thank you very much for all the hands!!
Sent from my CSL-MI410 using XDA App
WELLCOM A99(Thai) i need ROM PLZ help me
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
cazwj said:
hi !
i have Wellcom A99 ,i think Update ,but not find this phone ROM,i need NEW ROM Software A99,Now A99 power off ,i need Update ROM,Uppdate Fimware,PLZ help me ,
My Email add:[email protected]
Thanks for everybody,All my friend,
THANK YOUR!!!
Click to expand...
Click to collapse
hi
a little bit of searching would have solved ur problem
it is available in the rollup thread anyway take it from below link
Link : http://www.mediafire.com/FB400

htc g1 tmobile evry time hard reset

if i hard reset then phone ok working
otherwise phone stop on andriod logo plz help how to flash
i serch here and google but i cant found easy solution for flashing anybody help me how to flash step by step
are you rooted? do you have a custom recover? which one? what is your radio/spl?
demkantor said:
are you rooted? do you have a custom recover? which one? what is your radio/spl?
Click to expand...
Click to collapse
no sir i nothing do in this phone i dont know how to root
and i have no custom recover
and i give u some information about this phone
model number=android dev phone 1
firmwer ver =1.5
basband version=62.33.20.08H_1.22.12.29
KERNEL VERSION=2.6.27-00392-G8312BAF
BUILD NUMBER=DREAM_DEVPHONE-USERDEBUG 1.5 CRB2114201 TEST-KEY
then you are already rooted, that is a developers phone which is pre rooted. you need to load a custom recovery (amonra is best in my opinion) and should also upgrade you radio and spl, google cyanogen wiki root dream, in that guide you will see a link for amonra, downloaded to sdcard, rename it recovery.img
now download a terminal emulator from the market, open it and type
flash_image recovery/sdcard/recovery.img
wait a few seconds then reboot to recovery
if that works then you can move on from there
Sent from my HTC Vision using xda premium
demkantor said:
then you are already rooted, that is a developers phone which is pre rooted. you need to load a custom recovery (amonra is best in my opinion) and should also upgrade you radio and spl, google cyanogen wiki root dream, in that guide you will see a link for amonra, downloaded to sdcard, rename it recovery.img
now download a terminal emulator from the market, open it and type
recoveryflash_image recovery/sdcard/recovery.img
wait a few seconds then reboot to
if that works then you can move on from there
Sent from my HTC Vision using xda premium
Click to expand...
Click to collapse
can u give me downloding link [custom recovery]

[Q] Stuck in CWM 5.0.2.6 Recovery - Flashing ROMS doesn't work

Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
RolloJarvis said:
Hey,
I am trying to fix a friends optimus black. He has CWM recovery installed but when I flash ROMs then reboot system, it just boots straight back to the recovery. Is there anything I am doing wrong? I have tried 3 different ROMs from the dev section, ICS, GB and JB. I make sure to do a full wipe between flashing.
Many thanks, as I don't have much experience with this phone. (Although I have many years experience with flashing android roms)
Click to expand...
Click to collapse
Reflash with Smart Flash Tool. A few kernels automatically go to recovery if they fail to load. I can't think of anything else.
Try changing your CWM Recovery by flashing another version. Use my CWM Recovery flasher (in my signature).
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
RolloJarvis said:
thanks, i tried changing CWM using your flasher, but it still didnt work.
I cant use the smartflasher as all the links are broken...
Click to expand...
Click to collapse
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
UniversalSS said:
Did you go in to s/w upgrade mode?and did you use the links in n00by's how-to guide?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
RolloJarvis said:
Yes but the links in the guide link to the smart flasher thread where the links are broken... So I can't use the tool. Any ideas?
Click to expand...
Click to collapse
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
might be redundant saying this but in cwm itself have you flashed the 6.0.1.4 update within itself ald?
N00BY0815 said:
What do you need? Some ROMs to flash? Find links to kdz files in post 3. Extract and root it yourself (also see post 3 on my how to).
Click to expand...
Click to collapse
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
stock ROM V10A EEU XXX with .bin & .fls. [CRC MD5: d880b8834400575b5827bafbf29a745e] - DepositFiles, FileServe, WUpload.
Other bin/fls ROMs are HERE. (All these links are working again!)
You need to install LG Mobile drivers. They are located HERE. [CRC MD5: e4614071e72c0292d3a8238908b5c7ba]
Click to expand...
Click to collapse
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
RolloJarvis said:
I was trying to follow the unbricking guide in this thread: http://forum.xda-developers.com/showthread.php?t=1448803
but the links for the following are broken:
Also, I am on CWM 6.0.1.4 but now I get an error when I try to choose a zip from the SD card "E: Can't mount /sdcard"
Cheers for the help.
EDIT: managed to find the files... will update soon.
EDIT 2: Flashed the official firmware with smart flasher, now im in a bootloop with the "firmware update" screen, first I had a BSOD.
Im about to flash the V20a files using smart flasher. fingers crossed.
EDIT 3: Flashing worked via smart flashing tool... BUT I'M STILL STUCK IN CWM RECOVERY!
any ideas?
Thanks
Click to expand...
Click to collapse
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
N00BY0815 said:
Wipe data, cache, then go to advanced, wipe dalwik, go back, go to mounts&Storage, mount as mass storage device, put any ROM you want on your sd card, go back, install zip from sd card, choose zip and install the ROM you downloaded
Click to expand...
Click to collapse
I have just done exactly these steps. I have tried flashing both the zeus rom and AOKP jelly bean build 4. Each time the ROM flashes successfully, however when I select "reboot system now," it just boots straight back to recovery again...
The only thing I could think of trying would be to restore a nandroid with cwm. I dont have one though, can anyone link me to a working nandroid, or upload one?
thanks
A crazy idea......
Stuck G key?
Sent from my LG-P970 using xda premium
could be... I havent got the phone at the moment but ill check next week. Not sure how i'd fix it though
got the phone back again... when i go into CWM "Key Test" option, it implies "button 0" is being pressed repetitively. Anyone know which button this is?

[Q] Clockwork Recovery installation

Hi Guys,
I've been trying to install CWR on my samsung GT-i9000 all day but the result is my phone doesnt boot anymore.
I can boot to download mode so that at least positive
I've tried to follow the guide i've linked below but the problem is I cant download the rom he refers to.
http://forum.xda-developers.com/showthread.php?t=1379650
I installed the CWR from his guide but I cant start into recovery to install a ROM
All the ROMS is see in development are zip files (and i need recovery for this i think) and there are not TAR files
I hope some1 can put me in the right direction.
Thanks a lot!
Kind regards,
Jesse
jessess said:
Hi Guys,
I've been trying to install CWR on my samsung GT-i9000 all day but the result is my phone doesnt boot anymore.
I can boot to download mode so that at least positive
I've tried to follow the guide i've linked below but the problem is I cant download the rom he refers to.
http://forum.xda-developers.com/showthread.php?t=1379650
I installed the CWR from his guide but I cant start into recovery to install a ROM
All the ROMS is see in development are zip files (and i need recovery for this i think) and there are not TAR files
I hope some1 can put me in the right direction.
Thanks a lot!
Kind regards,
Jesse
Click to expand...
Click to collapse
http://d-h.st/J6r
Thanks a lot fazbarulho!
I opened the file and see there is also a recovery option.
I assume I have to flash the rom first with odin and use the following files:
s1_odin_20100512.pit
CSC_JW4.tar
PDA_JW4.tar
PHONE_JW4.tar
And after that reboot and flash using:
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
Is this correct?
EDIT: I can confirm that this method works for other people who want to install CWR.
fazbarulho really nice from you to help me, thanks again!
Regards,
Jesse

Categories

Resources