Hi everyone,
I own a captivate-i896 (rogers)
I have run into a very serious trouble
I tried to odin back to stock and now I am experiencing this problem. I get the following message:
update media. please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata:media:Can't mount DBDATA:
copy default media content failed.
PLEASE HELP.
I tried delete all user data. reinstall packages. delete cache. EVERYTHING.
I even trying flashing again 3 times. No luck.
Can someone please help?
First thing is your phone isn't bricked if it still has power and you can see things on it. Second, what were you doing with Odin when it was flashing? Was it the full Odin or a one click version? Are you making sure you flash the proper firmware? What did you have on your phone before you tried going back to stock? Lots more detail is helpful because your phone works...just not like it should. Again its no brick and searching the forums will help with your issue.
This is my Captivate. There are many like it but this one is mine.
haroonazeem638 said:
Hi everyone,
I own a captivate-i896 (rogers)
I have run into a very serious trouble
I tried to odin back to stock and now I am experiencing this problem. I get the following message:
update media. please wait
E:Can't mount /dev/block/st110
(Invalid argument)
E:copy_dbdata:media:Can't mount DBDATA:
copy default media content failed.
PLEASE HELP.
I tried delete all user data. reinstall packages. delete cache. EVERYTHING.
I even trying flashing again 3 times. No luck.
Can someone please help?
Click to expand...
Click to collapse
You had a lagfix installed that you did not disable before you reflashed. Your internal partition is still on ext4 but the data is on efs. This is not a problem. You need the one-click version of odin. Search the threads for it and instructions on flashing. You will have the att boot logo but there are ways to work around it, but first do the one click.
Sent from my SAMSUNG-SGH-I896 using XDA App
clemmie said:
You had a lagfix installed that you did not disable before you reflashed. Your internal partition is still on ext4 but the data is on efs. This is not a problem. You need the one-click version of odin. Search the threads for it and instructions on flashing. You will have the att boot logo but there are ways to work around it, but first do the one click.
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
I thought Lagfix didn't need to be disabled if you were flashing to stock, just going from ROM to ROM. Besides that, I don't feel comfortable running 1-click for any reason as it bricked my first phone, just trying to flash.
What ROM were you running when you encountered this problem?
Stock, with a SpeedMod kernel. I wanted to go back to a stock kernel with voodoo. Trust me on this one, one-click will restore you to 2.1 if you follow the instructions.
See this thread:
http://forum.xda-developers.com/showthread.php?t=964749
Sent from my SAMSUNG-SGH-I896 using XDA App
The reason you have to disable the lagfix is because with a new ROM you are likely flashing an integrated kernel with a lagfix. Some are Captivate-based, some are i9000-based. Additionally, some use Supercurio's Voodoo Lagfix, some use Hardcore's SpeedMod. One or more of these elements might be incompatible going from one configuration to the new flash config. Without knowing more about what you had before and what you wanted to flash, this is the best explanation I can give.
If you are irked by the AT&T boot screen, I am also partial the this fellow's package, which I have used and works well. Read and make sure you have the Rogers version.
http://forum.xda-developers.com/showthread.php?t=944418
clemmie said:
Stock, with a SpeedMod kernel. I wanted to go back to a stock kernel with voodoo. Trust me on this one, one-click will restore you to 2.1 if you follow the instructions.
Click to expand...
Click to collapse
It has nothing to do with following the instructions - It has to do with the Batch version of the phone - 1010 and 1012 batch numbers do NOT play well with 1-click.
Dante04SRT said:
It has nothing to do with following the instructions - It has to do with the Batch version of the phone - 1010 and 1012 batch numbers do NOT play well with 1-click.
Click to expand...
Click to collapse
I'm well aware of that:
http://forum.xda-developers.com/showpost.php?p=11649620&postcount=5
What you might not be aware of is that Rogers Captivates are not prone to these failures as they are different build numbers. This is a fellow Rogers customer. I'd bet dollars to doughnuts that his build is 10.11.
Thanks everyone for all the responses.
Actually I had doc's rom installed on my phone and I believe I had the hardcore speedmod kernel OR the glitterball's kernel on my fone and also had the lagfix.
I was actually in process of flashing the cyanogen 7 gingerbread when this happened. I forgot to copy the actual flash file(that i was supposed to instal from speedmod kernel recovery) and so i just decided to odin back to stock and start the process all over again. But after doing that my phone never went past the rogers splash screen.
I use the ODIN 1 click software where u just load the PDA and PIT files and flash the fone. I have tried Odin back to stock for Rogers eclair 2.1 and froyo 2.2 without any luck. I also tried the at&t 1 click odin flash back to stock without any luck.
The best I was able to do was to reach the rogers splash screen and then the screen turned black and thats it.
I flashed many different kernels but nothing happened.
I even downloaded the giorgio armani firmware for the captivate and flashed that which got rid of the mounting error in the 2e recovery screen but after the splash screen, the phone just kept vibrating and nothing happened.
I have tried everything you guys asked me too.
Also, after flashing the I9010 rom(giorgio armani), my download mode 3 button combo changed. First, I used vol up and down plus USB to get into download mode but now its changed to vol down + power. This one is not a big deal as i can still get into download mode. But I am telling you all just to help.
I also read somewhere that we cannot repartition and flash using odin 1 click if we have a lagfix kernel installed. I might have done that too that might have caused the problem.
Someone here mentioned that the file system is changed from ext4 to efs or something like that. I don't know what the real problem is.
Please help
clemmie said:
I'm well aware of that:
http://forum.xda-developers.com/showpost.php?p=11649620&postcount=5
What you might not be aware of is that Rogers Captivates are not prone to these failures as they are different build numbers. This is a fellow Rogers customer. I'd bet dollars to doughnuts that his build is 10.11.
Click to expand...
Click to collapse
My build is 10.10
but I never had a problem with flashing with 1-click ODIN to stock before.
I have tried both AT&T and rogers versions through 1-click odin.
Hope that helps.
clemmie said:
Stock, with a SpeedMod kernel. I wanted to go back to a stock kernel with voodoo. Trust me on this one, one-click will restore you to 2.1 if you follow the instructions.
See this thread:
http://forum.xda-developers.com/showthread.php?t=964749
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
I am just going to try your method. I am downloading from here:
http://forum.xda-developers.com/showthread.php?t=731989
However, I cant do master clear because im stuck in recovery. Does it matter?
im going to try and see.
will update soon
clemmie said:
Stock, with a SpeedMod kernel. I wanted to go back to a stock kernel with voodoo. Trust me on this one, one-click will restore you to 2.1 if you follow the instructions.
See this thread:
http://forum.xda-developers.com/showthread.php?t=964749
Sent from my SAMSUNG-SGH-I896 using XDA App
Click to expand...
Click to collapse
I got it working. THANKS A LOT TO YOU.
YOU ARE THE MAN clemmie.
I didn't know that what I was using before wasn't a 1-click odin lol
it's fixed now. just have to install the rogers eclair or froyo now. Thanks a LOT!
haroonazeem638 said:
I got it working. THANKS A LOT TO YOU.
YOU ARE THE MAN clemmie.
I didn't know that what I was using before wasn't a 1-click odin lol
it's fixed now. just have to install the rogers eclair or froyo now. Thanks a LOT!
Click to expand...
Click to collapse
It can be pretty harrowing when you are in limbo like that, glad to be of assistance.
Clemmie, YOU rock!!! I haven't had this problem, but... your instructions were stated in a way that I could visualize the whole process! If I ever have issues, I'm looking for YOU!
Related
Hey guys I have a rooted captivate running froyo. I want to try the Cognition v2.3b3 rom with lagfix, but I no idea where to start. Do I need to flash back to stock or can I just load the rom? Also I was wondering about overclocking, can I do that with this rom? Any help is appreciated. I am new to android, came from a unlocked iPhone this is way better! Thanks guys
tygoerlitz said:
Hey guys I have a rooted captivate running froyo. I want to try the Cognition v2.3b3 rom with lagfix, but I no idea where to start. Do I need to flash back to stock or can I just load the rom? Also I was wondering about overclocking, can I do that with this rom? Any help is appreciated. I am new to android, came from a unlocked iPhone this is way better! Thanks guys
Click to expand...
Click to collapse
you should be able to flash over but it is considered good practice to start from stock, also i think you need ji6 froyo before jj4 froyo which cog2.3b* are based on, so the accepted proper procedure is masterclear and flash jf6 from the one click installer get android id with android id changer, flash ji6, also a one click installer, and then flash cognition. all with odin. you can clockwork recovery flash cognition but it is another proceedure to root ji6. after cognition is installed reinstall android id changer and load the id from the stock rom.
i usually flash over without lashing to stock ect unless the flash over has issues. and overclocking is handled in the kernel you need to flash http://forum.xda-developers.com/showthread.php?t=828052
with odin, no .pit file needed just drop file in the pda slot and flash in download mode. overclocking is enabled by default so you need set cpu to manage it.
there is a link to an app to manage under volting, my settings are -50mv low and -75 high. it also handles the scheduler, i use cfq. anticipatory seems to work eqaully well. some suggest deadline and it may be better real world but i dont see it in benchmarks. and real world is too subject to placebo effect and coincidence.
this kernel also has a universal lag fix handled in clockworkmod recovery which replaces the stock recovery. best setting for that is no rfs jfs overkill but in the advanced settings disable bind to dbdata. it's fast! 17.299 mflops in linpack, and it's the first time that i have had a lagfix improve a linack score(at least it appears to)
Here is the steps that got me from ji6 2.2 to cog.
First if you don't already get titanium back up and back up all of your apps you don't want to loose and copy the file to your computer and remove external SD card if you have one.
Then i used the 2.1 version of odin one click to go back to 2.1 after that do a master clear then root your phone and down load rom manager. Using rom manager flash the clockwork recovory mod.
Next download cognition 2.3b3 then go back to rom manager and select install rom from sd card and find your cog rom you just down loaded and it will do the rest
Once cog is on your phone you can put you titanium backup file back on your phone and redown load titanium backup and restore all of your apps.
Sent from my SAMSUNG-SGH-I897 using XDA App
@ Dani897 I do have ji6 version of froyo. So I do need to flash back to stock 2.1 or can I flash cog with the version of froyo that I am running now? Sorry for the confusion here. I would like to keep running froyo if I can. Thanks guys
tygoerlitz said:
@ Dani897 I do have ji6 version of froyo. So I do need to flash back to stock 2.1 or can I flash cog with the version of froyo that I am running now? Sorry for the confusion here. I would like to keep running froyo if I can. Thanks guys
Click to expand...
Click to collapse
Check out the Cog wiki.
http://cognition.theidiotshideout.net/mw/index.php?title=Main_Page#Installation
If you have clockwork installed, you can install over any rom. I would clear data to be on the safe side, though.
kegobeer said:
If you have clockwork installed, you can install over any rom. I would clear data to be on the safe side, though.
Click to expand...
Click to collapse
no you cant. it will only work if he has 2e recovery kernel. if it was the ji6 leak then it is running 3e recovery and no matter how hard you try, it wont boot into clockwork.
answer:
use the ODIN version of cognition. doesnt matter what rom you are on...
Ok so I am trying to flash cog via oden. I downloaded the file and am looking at the how to on the wiki but, in the wiki it says that all the files will be in the download Odin.exe PIT.pit PDA.tar PHONE.tar CSC.tar. The only files that I am seeing are the pda file the odin.exe and the pit file none of the other ones. Is this normal?
tygoerlitz said:
Ok so I am trying to flash cog via oden. I downloaded the file and am looking at the how to on the wiki but, in the wiki it says that all the files will be in the download Odin.exe PIT.pit PDA.tar PHONE.tar CSC.tar. The only files that I am seeing are the pda file the odin.exe and the pit file none of the other ones. Is this normal?
Click to expand...
Click to collapse
Yes. That's what is supposed to be there. That's all you need for that particular rom
Sent from my Captivate
Cool thanks a lot for your help. Just to make sure before I do this. I did a back up using tibu, Im going to pull the sim, open odin, and flash. Is it really that easy or am I missing something? Thanks guys I really appreciate it.
tygoerlitz said:
Cool thanks a lot for your help. Just to make sure before I do this. I did a back up using tibu, Im going to pull the sim, open odin, and flash. Is it really that easy or am I missing something? Thanks guys I really appreciate it.
Click to expand...
Click to collapse
Its really that easy
Sent from my Captivate
Cool gonna do it now. Will post results
Ok just flashed and that went well, but it wont let me open any apps. For example when I try to open up tibu it tells me I have to force close. I also dont have 3g
i dont know if there that is a common issue, but im sure you will need to reflash. you may want to flash to stock.
it's a multi step procedure and annoying but it is usually safer , i guess i got lucky.
i dont know for sure if you need to flash ji6 before cog 2.3b, design gears may have fixed that, i didn't read the details of why it was needed.
i would;
(optional)master clear, remove sim and sdcard. you will loose everything including titanium backups and posibly nand backups. master clear is done with the phone booted normally.
flash jf6
flash cognition 2.2 by meathod of your choice (so you have root and clockwork recovery)
flash cog 2.3b3 in clockwork mod recovery.
I don't know iflosing every thing is worth it for me, I really do want to flash this rom and try it out, but right now seems risky, I flashed back to froyo that I was running before. I thibk I'm going to do some more research and see what I can find. Thanks for all your help guys
Ok a few days ago I flashed my first Rom (Cognition) all went well and before I did it I backed up my oringinal stock 2.1 rom with rom manager, My question is can I restore/recover that 2.1 original rom through rom manager then flash phoenix 2.5 rom or will I have to use odin to restore then Flash my new Rom. Thanks any help appreciated
No
You need to do this
http://forum.xda-developers.com/showthread.php?t=731989
rob1216 said:
Ok a few days ago I flashed my first Rom (Cognition) all went well and before I did it I backed up my oringinal stock 2.1 rom with rom manager, My question is can I restore/recover that 2.1 original rom through rom manager then flash phoenix 2.5 rom or will I have to use odin to restore then Flash my new Rom. Thanks any help appreciated
Click to expand...
Click to collapse
I Have A HTC Hero But I'm Pretty Sure It's The Same....
I'm Not Sure I'm Understanding Your Question, But I Think You Want To Get Back To Your Stock ROM & Flash A New ROM Correct?
If That's It?
You Can, But You Don't Have To Convert Back In Order To Flash Another Rom.... Just "Wipe"
System/Cache/Dalvik Cache,
& Install The New Rom!
You Can Always Restore Back To Your Stock Backup!!
Sent from my HERO200 using XDA App
PMGRANDS said:
I Have A HTC Hero But I'm Pretty Sure It's The Same....
I'm Not Sure I'm Understanding Your Question, But I Think You Want To Get Back To Your Stock ROM & Flash A New ROM Correct?
If That's It?
You Can, But You Don't Have To Convert Back In Order To Flash Another Rom.... Just "Wipe"
System/Cache/Dalvik Cache,
& Install The New Rom!
You Can Always Restore Back To Your Stock Backup!!
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
No you can not revert bacj to your stock 2.1 from 2.2 using clockwork with a captivate
Can you explain how to wipe system /cache/dalvix cache or post link i googled it but found nothing with step by step instructions. I would like to try this before odin. Also why does it let you create a back up of 2.1 rom if you cant revert back there from 2.2 then whats the point of backing up 2.1 in the first place. Just thought you could do that instead of odin after reading a post which I was going to post the link to here but wont let me cause Im too new.
rob1216 said:
Can you explain how to wipe system /cache/dalvix cache or post link i googled it but found nothing with step by step instructions. I would like to try this before odin. thanks
Click to expand...
Click to collapse
Do you have rom manager?
Yes Free version
rob1216 said:
Yes Free version
Click to expand...
Click to collapse
I do not recommend flashing phoenix over cognition without a flash to stock, but if you want to try, you can.
Cognition uses voodoo. First thing you should do is disable it.
Find voodoo file in your internal sd. Create a folder in side voodoo folder named disable-lagfix. Reboot phone.
Ok its disabled, but If Odin is the best way to go maybe I should try it but just been reading about higher risk of bricking phone using odin. Just really want to try different rom because cognition it smooth as butter but battery life is killing me compared to stock and yes I tried the charging battery to 100 then unplugging shutting down charging to 100, reboot, shut down then to 100 again no help. Anyways if I use Odin does voodoo have to be disabled also.
Pull your battery. Obviously power off first. Under battery is a build number, mine is 1008. Tell me yours
mine is 1010
Odin may be difficult to use. You may want to research your build more. Anything over 1008 is where odin is an issue
What is your base
Settings, about phone, bottom
Damn i didnt want to hear that,Says baseband version I897UCJI6 is that it.
Yes that is it.
Being on build 1010 I an not comfortable with telling you how to proceed. You need advise from someone who flashes with that build. It behaves differently with odin. I am sorry. Search build 1010
Ok thanks for your help, Ill look around
If you've never flashed with Odin one-click before, try this instead to avoid any risk of bricking (very likely on some build 1008-1010 phones that don't run JF6 stock):
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Has anyone with a 1010 tried this with success
GGXtreme said:
If you've never flashed with Odin one-click before, try this instead to avoid any risk of bricking (very likely on some build 1008-1010 phones that don't run JF6 stock):
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
Click to expand...
Click to collapse
rob1216 said:
Has anyone with a 1010 tried this with success
Click to expand...
Click to collapse
Me And several people I suggested it to. But now I have a batch 1009 Captivate (traded in mine because of random shutdown issue).
saved my cappy once
I guess I'm confused...is odin really necessary at all for him? If he disables voodoo lagfix, and clears dalvik cache, he should be able to flash over the top...correct?
I flashed cognition 3.02 direct to andromeda 2.0 via cwr and did not clear dalvik or disable lagfix (since cog and andromeda both enable voodoo)...no problems for me.
Maybe it's different/more complicated flashing over the top to the ROM he wants to go to though...
i897 running Andromeda 2.0
I am in desperate need of help you guys! I screwed up so hard that I don't even know where to begin...
THE SITUATION:
-Right now when I go to turn on my phone, it will only stay on the current SAMSUNG GALAXY S I9000 screen (the very first screen when booting your phone) and it keeps flashing in and out.
Before trying to use Odin to put back the original Kernal on my phone, it was just stuck as the SAMSUNG GALAXY S I9000 screen, still wouldn't start. <I followed this website step by step>
http://www.samsunggalaxysforum.com/...-to-a-stock-rom-after-installing-darky's-rom/
BEFORE ALL OF THIS EVER HAPPENED:
I finally rooted my phone and manage to download Clockworkmod recovery on my phone and then used it to flash Darky's 10.2 custom ROM. Everything turned out great except at the beginning of the boot, the screen turned all rainbow coloured, completely distorted, and it continued to do that. I then tried to go back to Recovery mode to do the Voodoo lagfix but I couldn't even get into the recovery mode anymore, it either wouldn't let me, or it did but the screen didn't go to it properly (more likely the first one). I read somewhere that if you reflash your phone again, it should make all the tweeks go away. So I tried that from the Darky's tools menu and ever since then, I've been stuck with the Boot Screen this whole time...
I already bricked my phone once, and that was before the Flashing Boot Screen.
I really need help you guys, I would at least like to have my phone back to the original basis, at least! Your help would be greatly appreciated!
THANK YOU
P.S. (i'm not that great at all this phone tweeking, but I've succeeded in doing it up until yesterday)
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
gfacer said:
Can you get into download mode (vol down+home+power while putting the battery in)?
If you can, just reflash a stock or custom rom in odin (like a darky odin rom) as guided by whatever rom you choose.
If you cannot get into download mode then we should know that too.
Edit: oh it looks like you could (and hopefully still can). Try a different rom or reflash. Sometime things do go wrong but as long as you can get to the download screen you should be fine in the end.
G
Click to expand...
Click to collapse
Yes, I can get into download mode! (thank you for reading my post).
If it's not too much to ask, could you maybe find the ROM that would be good for me to flash, considering my situation?
I want to be sure that it's what the top tech guys would recommend
A link would be appreciated
thank you again!
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
gfacer said:
I'd start with a Darky rom - lots of users - active forum and odin editions for your situation. I have to go but you'll find the link on the first page of the development section.
G
Click to expand...
Click to collapse
So in essence all I have to do is flash the Darky ROM V10.2 with Odin using the Download mode on my phone and it should be okay?
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Wait one caveat. Was it a gingerbread rom or froyo? Use a Darky rom of the same type...
Then yes it should be ok if you follow their guide. Cross fingers.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well...I did everything you said. The ROM is on there alright, it flashed and everything (And I know this because now when the boot screen STILL FLASHES, the darkcore & darky's rom logo are on it too).
THIS TIME AROUND:
The stock recovery seems to work...
any ideas??
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Alright I'll try and reflash the same one using a different version of odin the. I'll let you know what happened
gfacer said:
Well we are sort of in long shot territory now... OK first try using a different odin version or ez odin and reflash.
If still not working??
Might be warranty time then but others are welcome to chime in.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
tried ezodin, flashed it, and i still get the exact same thing I've exhausted every single possibility there is!!!
I really need help on this, my warranty is not gonna do anything because i have the phone rooted..
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
gfacer said:
If you flash a stock rom with pit the root is gone. It won't boot but they can't prove it was you either and I don't think it was you.
But see my other post on your other thread for one last thought.
G
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
okay that could be useful data potentially (let's hope it won't have to be).
If you didn't see my reply from the other thread, here it is:
Once I rooted my phone, I automatically went from Stock Froyo to Darky's 10.2 extreme edition. It worked and everything except for that color disfiguration and the clockworkmod recovery not working.
It's weird because after I flashed my first darky's rom, i checked the phone and it said that the firmware version was 2.3.X (I believe X may have been 4). So from what you're saying, I don't exactly think it has anything to do with the fact that I went straight from froyo stock to GB darky ROM.
So are you saying that I should flash darky's 9.3 for Froyo and THEN flash the latest version?
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
Ok, so just to be 100% on this
-I should flash Darky's 9.2 froyo onto my phone,
-then I should flash regular GB onto my phone (Not sure about the bootloader part though, if you could clarify that)(Also where would I get JUST a stock GB ROM?)
-then I can flash a custom GB ROM?
gfacer said:
No I think that you need froyo re edition then stock gb with bootloader (as the instructions say I thought) then a custom gb like 10.2.
Sent from my GT-I9000M using XDA Premium App
Click to expand...
Click to collapse
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
roma17 said:
well i can safely say that flashing the 9.2 froyo rom was a fail. It's still doing the same old routine.
I just know that this problem can be fixed somehow without sending it in to bell or samsung or something.
Click to expand...
Click to collapse
I think you are right but other than trying again and again, which I've done before -though now I know why I had too - I am out of suggestions. Good Luck and if I have a brainwave I'll let you know.
Sent from my GT-I9000M using XDA Premium App
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
gfacer said:
OK a few last brainwaves:
1) Try a fully complete stock rom with cache.rfs, dbdata.rfs, factoryfs.rfs, modem.bin, param.lfs, zImage, and sbl.bin (this was from JL2 rom for Bell - not sure if they all have the sbl.bin) and pit.
The key is to make sure it is complete. Try downloading the same rom from 2 different sources just to be sure its not a corrupt download (going overboard I know).
2) Can you get into recovery? Try to format partitions (not system) under advanced features (I think - I only have 3e right now as I am trying to diagnose other issues).
3) If you have a froyo rom on at one point, try to put a steam recovery kernel on. Its not really being developed anymore but I think that if you put a CWM packaged rom on to the external SD you could flash from there or at least move it to the internal and then flash it. Worth a shot. Or you might be able to transfer one in regular CWM recovery - can't recall as I have not had to try for about 8 months.
4) If you really want to try something completely different, and I am not sure I've got the balls if it was me but if you can get a file to flash from CWM or steam that you can get on from the external SD, you might try CM7. It uses a completely different file system so you'd have to go back to froyo via odin only (as a samsung based rom will not play well when flashed on top of the cm7 file system).
And calling it a day at this one...
Click to expand...
Click to collapse
Okay, basically at this point, I just want my phone to work I've tried what you said. I remember that before rooting my phone initially I was running Froyo 2.2.1. So I found the ROM for that ( http://www.samfirmware.com/WEBPROTECT-i9000.htm ) Just like you said. I downloaded from the *Provider Samsung Galaxy S i9000 heading and picked the I9000BOJS5 ## from February 2011 because I think somewhere around there I updated my phone to Froyo. Flashed it, did everything, still no luck.
I've had a recent hunch though. When the bootscreen boots up, it keeps saying i9000 only, when before it used to say i9000M at least for a little bit (yes my phone is i9000m). Is there a stock froyo rom that's specifically designed to go with the i9000m model? Or are they just all the same?
Never give up
-Thank you so much
So my wife got a good deal on some Galaxy Tabs at her work, and being so familiar with rooting and installing custom ROMs with my Galaxy S2, I jumped right in. Stupid mistake #1. I didn't realize there were so many different versions (The S2 is international, so 99% are all I9100, and mine being I9100M, there was no concern about using I9100 firmware - apparently this was not true of the P1000 and P1000M as I've come to learn), and just followed the first comprehensive guide I found to upgrade from 2.2 froyo to 2.3.3 gingerbread, so that I could go to CM9 or CM10. I tried to flash XWJK8 (and one of the kids ran by and bumped out the USB cable!) and it would only power on to the emergency download mode. I somehow managed to get Froyo back on and working by flashing the Euro flash package (Flashing the PIT and XWJJ4), then flashing OXAJK5. I was able to boot up and was running Froyo again.
Undeterred by the set back, I tried again for Gingerbread (again, not realizing that there were GSM-only ROMs that I shouldn't have been using). I followed a guide by Chainfire (I think) that involved flashing XXJQ1, a new bootloader, and a dbdata file in PDA then finished up by flashing the CF Root OXA-JQ1 kernel. I went into CWM and did a factory reset, clear cache, etc... but it wouldn't boot past the Samsung logo. About this time, I learned about the GSM/CDMA thing, and realized I went wrong. So I set out to try and figure it out for CDMA. Unfortunately, everything refers to this Overcome guide, but the page would not load, so I figured that with CWM working then I may as well try for CM9. It failed (assert errors), so I decided to try for the stock Bell Gingerbread ROM (P1000MUGKF6). It flashes successfully, but after flashing - I get the following errors on boot up:
-- Updating filesystem...
E: failed to mount /dbdata (Invalid argument)
E: discard_filesystem_for_rfs: Can't mount /dbdata
-- Wiping cache...
Formatting /cache...
Cache wipe failed.
-- Applying Multi-CSC....
Installing Multi-CSC
Can't access to '/system/csc/KOR/system/'.
Successfully applied multi-CSC.
Click to expand...
Click to collapse
So just for giggles, I tried a factory reset with the following results:
-- Wiping data...
Formatting /data...
Formatting /dbdata
E: format_volume: rfs format failed on /dev/block/stl10
Formatting /cache...
Data wipe complete.
Click to expand...
Click to collapse
I tried doing the Euro flash again (as it got everything working again last time), and it runs successfully but still won't boot up. So I flashed the Gingerbread firmware for Bell again (P1000MUGKF6), and it still won't boot at this point, just hangs at the Samsung logo. Long story short, I've made a mess of things, and I am thinking that the more I try and fix this myself, the more I'm messing things up. I'm praying that someone here is able to help me fix this mess, otherwise I am at the point of throwing in the towel and letting this thing end up as a brick, as if no one on XDA knows how to fix this, I don't think anyone will know how.
Thanks for reading this novel, I can't tell you how much I would appreciate some assistance!
Use overcome method.
Follow my signature.
Download the GB stock safe and the PDF guide
Jump to page 7.
P1000 and P1000M is identical except for the radio.
But they both are gsm.
If you had flashed wrong ROM you would have had a brick.
You just haven't been flashing correctly.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Use overcome method.
Follow my signature.
Download the GB stock safe and the PDF guide
Jump to page 7.
P1000 and P1000M is identical except for the radio.
But they both are gsm.
If you had flashed wrong ROM you would have had a brick.
You just haven't been flashing correctly.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
I just saw your reply on a different post, and gave it a try. I can't thank you enough! It worked perfectly. After I flashed the Stock Safe I was able to get it to boot up no problem, so I went on to do the kernel, and then flash the Overcome ROM from there (which was successful), but now it's been sitting on the Overcome ROM boot screen for the last several minutes, starting to think it's not going to boot... My end goal was to get CM9 installed on it, so even if Overcome ROM won't boot, am I safe at this point to try flashing CM9, or should I get Overcome ROM working first?
Also if anyone happens to know if I need to download the p1c (cdma) version of CM9 (I'm assuming based on your reply that I don't, and the p1 (gsm) version of CM9 should work, but I just want to be safe).
Thanks again for your help, at least I got things working at one point, and am confident I can get back to that point if things go south again.
So I went with my gut, flashed CM9 for the P1000 (non-CDMA) and it works like a charm. Again, can't thank you for all your help! I can't tell you how much time and grief you saved me from!!
Glad it works out.
In the future, you don't need to flash the overcome ROM.
Only overcome kernel is needed o use its cwm recovery.
The stock safe is needed to give you a clean stock baseline that works with overcome kernel.
the ultimate goal is just to have cwm recovery.
Sent from my GT-P1000 using xda app-developers app
priyana said:
Glad it works out.
In the future, you don't need to flash the overcome ROM.
Only overcome kernel is needed o use its cwm recovery.
The stock safe is needed to give you a clean stock baseline that works with overcome kernel.
the ultimate goal is just to have cwm recovery.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks again for the help, she had bought 2 - 1 Bell and 1 Rogers Galaxy Tab. The Bell one was the one I was working on when I posted this, after finishing it (in total close to 12-14 hours of straight working on it and looking stuff up) I was able to get the Rogers one done in less than 20 minutes haha! :highfive:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Tyannt said:
Re: [ROM][4.1.1][PORT] X-Bean **2.0** (fast, stable & superfunctional)
Been browsing for an update on AT&T Captivate SGH-I897 Froyo 2.2 and now on T-Moble
Unlocked, rooted with SOC and CWM recovery..
Read thru development on X-Bean **2.0**
Understood to get: x-bean 1.1Base.zip / gapps-jb20121011-signed.zip / BUT not sure which kernal!!
Early the thread states Devil 1.0.4vc but most recently suggests alternative of semaphore 2.0.3c.
Am I correct in thinking both work, just the semaphore is newer?
Thanks
Click to expand...
Click to collapse
They both work. Just make sure you get the right version.
BWolf56 said:
They both work. Just make sure you get the right version.
Click to expand...
Click to collapse
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Tyannt said:
Appreciate the reply BWolf56!
I will be sure to use either the kernals with the "c" suffix as suggested in the original thread!
NOW! Trying to decide on the best Backup App..
Click to expand...
Click to collapse
TiBu is my personal fav.
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Tyannt said:
UPDATE... Again, thanks BWolf56!
AT&T Captivate on FROYO 2.2. OneClickRoot, CWM Recovery V2.5.1.2
Did ROM backup, TiBu backup, EFS, APN, Contacts etc
Installed/Flashed:
ROM X-Bean1.1 base.zip
gapps-jb-2012101-signed.zip
Semaphore_jb_2.0.3c.zip
landscape_fix.zip
Phone booted up fine initially, would always revert to landscape view, back button was now the home button.
Could not find any of my backups. "UI" kept crapping out; "Unfortunately UI is not responding" Think that's what it said!
Had to click OK and it was back until i touched anything and kept happening...
Did Advanced Restore -> CWM Recovery of: System, Data, Cache, ext/sd
Phone rebooted.... Stuck on AT&T logo screen, charging pinwheel shows but doesn't move.
Cannot get into recovery.. managed to get into "dowload mode"
tried i897UCJF6-final-OCD-REVO.zip loaded on computer, phone connected in download mode,
loaded PIT file only as the zip had no PAD file....... NO SUCCESS
If I proceeded in a NOOB fashion, it's because I am so I'll take my licks Lol
Any help would be appreciated!
Figured it best to just get back to stock 2.2, maybe even earlier since I wouldn't have the 3e recovery
problem not being able to install from OTHER sources. Then TRY again after brushing up!!!!!!!!
Click to expand...
Click to collapse
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
Did you flash a I9000 ROM? If so, you need the I9000 bootloaders.
Also to downgrade android version, you have to use Odin (i suggest kk4 without bootloaders if you already have the gb ones, which can be found in the stickies).
Make sure you follow the full instructions next time to avoid issues like that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Tyannt said:
---------------------------------------------
Ahhh, fello Canadian i see!
You may be correct thinking i have I9000 "JB"? bootloaders!, in the original
thread : Aceofspades replied to a member question stating: "Port means that this
rom is originally made for i9000 and made it to work for captivate."
Should I assume I've flashed an I9000 Rom? and now have JB bootloader?
Thinking back, I did not wipe before going back and using recovery! Not sure that was the problem
but it was on reboot after restoring CWM/system. data. cache etc that the phone rebooted and ended up
in a continual cycling of the ATT logo screen!
Big question now is how do I do to remedy my situation!!
NOTE...I have made a JIG and can get into "download Mode" now
From this point on I'll document my every move in order to be able to provide
the exact procedure I went through... might be more helpful !!
I know I know... NOOB! Lol
PS, is an alternative to use Kies Mini and update to Gingerbread?
Click to expand...
Click to collapse
First thing: don't use kies at all!
There are no JB bootloaders for the cappy, just eclair, froyo and GB. If the ROM is a port, you'll most likely have to flash the I9000 gb bootloaders but I'd suggest finding another ROM to start with (like CM). Playing with bootloaders is the only thing that will make your phone a paper weight if something goes wrong.
Also, bootloaders aren't included in roms for safety measures. That being said, you can run ICS and JB roms just fine with the GB bootloaders.
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
Sent from my SGH-I747 using xda app-developers app
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Tyannt said:
Understood... NO KIES
Sorry but a little confused still...
Do I Odin flash KK4 w/o bootloaders first -> flash corn kernal with Odin -> then flash a CM ROM using their procedure?
Where in the sequence is "flash I9000 bootloaders?
* No luck finding Odin w/o bootloaders yet, outdated download sites. Will search through xda again.
Noted! "There are no JB bootloaders for the cappy, just eclair, froyo and GB." (I was originally ATT captivate on FROYO 2.2)
Noted! "bootloaders aren't included in roms for safety measures." "you can run ICS and JB roms just fine with the GB bootloaders."
As for what comes next. Perhaps use Odin to flash stock kk4 without bootloaders, from there flash corn kernel (once again with Odin) and give CM a whirl following their full flashing instructions. (Which can be found both in their thread and website)
I might be a little hazy on the order of your suggestions so thanks for the patience!
GREATLY APPRECIATING YOUR EFFORTS!!
Click to expand...
Click to collapse
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
BWolf56 said:
For now, forget about the I9000 bootloaders.
Here's KK4: http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3
During your flashing, did you ever flash the GB bootloaders? If not, get the version with bootloaders and make the the flashing isnt't interrupted.
And yeah, from there you got it right, corn kernel; and follow their full flashing instructions.
Click to expand...
Click to collapse
--------------------------------------------------
* I haven't knowingly flashed GB bootloaders.
* I've been all over the link you provided... no working downloads.
Hmmm, I did try "Odin" a couple of times to get the GingerBread update...After doing that my phone now
boots to the AT&T logo, goes black for a sec and a screen like a bad tv signal comes up! Also, the phone
is now charging and showing the big battery icon! I seem to recall reading somewhere that if that happens
it may be wrong bootloaders? Can't remember exactly what it said but am I correct thinking it was one of
your own replies to another member?
Anyway, done for the night Grrrr
Thanks so much!
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
Here is a post with a pic about the screen u r seeing. Pixelated screen means u don't have the GB bootloaders... http://forum.xda-developers.com/showpost.php?p=33227557&postcount=2
And i am currently in the process of uploading my Odin and Heimdall Stock KK4 One Clicks. Gonna be using MediaFire. Will post when all uploads are done and new links attached to my post #3 in the Stock Rom stickied thread in the Development forum...
Fixin to crash for the nite. But will get it done asap.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Tyannt said:
-------------------------------------------------------------------------------------------
Appreciate you taking the time to reply! The images you displayed are exactly what I am seeing..
Links aren't good forever, i realize that just hard to believe I hadn't found them ANYWHERE yet! Lol
PS ************
* Have since got GB Bootloaders and added thru Odin3 v1.70.. PDA.tar.md5
* Now able to get into recovery mode by 3-button, shows 3e recovery, have ability to install from sdcard,
wipe data/factory reset, wipe cache partition.
* I have an "update.zip" on there but can't remember what it's for so I didn't do it...
but still no UI coming up, just the AT&T logo which cycles ON/OFF
Am I still in the same boat... needing KK4 Odin flash, after doing that will i be able to copy
a KK4 ROM zip to my phone thru PC and flash from the phone?
Click to expand...
Click to collapse
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
BWolf56 said:
KK4 is a one click Odin.
From there, you'll have to use Odin 1.85 or 1.87 to flash Corn kernel to be able to flash your way up to CM.
Click to expand...
Click to collapse
Hey there!
* 4-2ndtwin chimed in and said he would post when he uploaded them.
Been looking in the meantime.
* I have both Odin versions, now understand that I can use Odin to flash any file I choose, such as the Corn kernal, not just files it may come with.
* I downloaded a "Stocki897uckk4-zImage.tar, unzipping shows "zImage" file but I
haven't touched it.
Just hanging in for a working link for the Odin KK4 One-Click I guess...
Question!!!
For clarification..Odin KK4 One-Click is just bootloaders, kernal and maybe modem, right? It's not going to give me a working ROM...OR, is it ALSO an alternative way to flash a ROM when I can't add a ROM zip to my phone thru my PC to flash?
Lol... I'll get a handle on this, more of a visual type
As usual, appreciate the help!
Stock KK4 Links up.
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
4-2ndtwin said:
...Aaannnd we're back !!!
Links up and going !!!
Stock I897UCKK4 Android 2.3.5 One Clicks *Heimdall and Odin*
Click to expand...
Click to collapse
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Tyannt said:
----------------------------------------------------------
HUGE THANKS! , downloading now... Will update
Got my fingers crossed
##### UPDATE #####
Used: I897uckk4 Odin One Click-Stock,NO Bootloaders, Re-partition, Full Wipe.zip
UCCK4 v2.3.5 loaded, running and stable, not rooted.
Time for a break!
Thanks again guys!
Click to expand...
Click to collapse
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
BWolf56 said:
From here, it should be a breeze. Just remember to follow the full flashing instructions :good:
Click to expand...
Click to collapse
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Tyannt said:
Still browsing ROMS...
Should I be bothered rooting yet? Not sure if I'll just have to do it again after a ROM switch?
Any suggestions for a root utility?
Click to expand...
Click to collapse
I suggest you start with CM.
As for rooting, you can get it directly on the store now (was recently made legal). I believe it's by chainfire. But do you need it atm?
Also, all custom roms come pre-rooted.
Sent from my SGH-I747 using xda app-developers app