Hi I flashed my phone using rom kitchen but before i did it i backed up my phjone using CWM, I believe o2 are starting to roll out the official 2.2.1 upgrade so i restored my phone using CWM, now my phone says it is
pda jp6
phone jpy
csc o2ujp3
but when i connect it through kies it says its
csc jp3(XEU)
and it cannot be updated
so, can anyone tell me how i can get kies to read it as o2ujp3 instead and if so how, i have read about spoofing kies but dont know what to do or what to put in where thankyou
Flash back your original rom that you saved which you have done i would then factory reset .
2.2.1 O2 Uk I wont bother wait for Gingerbread .
jje
Related
HI i upgraded my T-Mobile sgs to the 2.2 firmware using the kies patcher my question is now is there a way for me to default back to the t-mobile 2.2 software?
Regards
Cprl.rst
Yes use the original T mob rom you saved with Kies Patcher .
Then update to current TMob via standard Kies .
NO SAVED ROM
Read Kies Patcher and find out how to spoof registry and or flash back to Eclair using Odin and then update via standard Kies update .
jje
do you know what the uk t-mobile eclair code is
Cprl.Rst said:
do you know what the uk t-mobile eclair code is
Click to expand...
Click to collapse
Nope probably TMobile have a user forum .
jje
does anyone know where i could get hold of t-mobile 2.2 samsung galaxy s firmware? or the 2.1 either would be good
Backup original ROM
Is there any way to backup my original (branded) ROM?
I intend to flash another ROM on my phone, the I9000BVJJPD one, which is the same a friend of mine has on his phone, an i9000B from Brazil. He got the 2.2 upgrade via Kies, but mine didn't, so I contacted Samsung and they said that my phone was branded and so it couldn't get the upgrade.
Since both are basically the same models, I wish to flash to the unbranded ROM, but I'd like to keep my original ROM as backup in case something goes wrong. Since it's not available in the web, how can I make the backup myself?
By the way, my current version, from *#1234# is I9000BVJJI1
Hi all.
Could anyone tell me why I cant update my samsung Galaxy s to 2.2,
its on o2 but the phone was on orange if thats any help.
Iv downloaded kies and it says there are no updates for my phone so can you help me?
Ive updated my girlfriends phone and she has got the same phone me
She can update it again now.
Allso we cant send mms:mad
Pete.
Hey there
Responding to you're message.
Im having this same problem with my girlfriends phone.
Everytime I try to update her phone it says that it cannot upgrade her phone.
I updated mine to 2.2.1 now. Her phone is still on 2.1-update.
Her buildnummer is I9000XXJF5.
Either she does not recieve my MMS.
Very strange.
P.s. Im from holland, and the phone arrived in Germany Language.
Please, need some help.
Your apn settings will be different on o2 if the phone is from orange which is why probably both internet and mms doesnt work.
Don't know why kies isn't playing ball, make sure u have the latest version.
I'd suggest changing to a stock firmware from samsung. E.g. The latest jpy firmware.
First thing is to check the 3 bitton combo works, if it doesn't then there is a really simple windows based fix for this on this forum that doesn't require any programming or command line stuff.
Next, visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase.
Sent from my GT-I9000 using XDA App
Thanks for getting back,
Ive done all the setting with o2 and still dont work.
I did the three button combo and reset my phone and put all the setting back in still no good.
Ive done all this visit samfirmware, sign up free, download odin and firmware. Follow instructions to a T. Install jpo firmware first as it's v2.2 then you can go for jpy as the v2.2.1 is really a vast speed increase but it would not download.
My phone numbers Pda jf3 Phone jf3 and Csc je5 if this helps
Cheers Pete.
If your phone is O2 UK you get update to )2 firmware .
If its an Orange product code phone you need to check Orange has updated the firmware .
jje
you could always do what i did with my o2 uk phone that wouldn't upgrade to latest version...im guessing that you may still be on JM1 software? [thats what mine was].
all i did was download the Kies registory patcher and use it to tell kies that i was on XEU firmware. next time i connected to kies it told me there was an upgrade available to JPY [2.2.1].
hope this helps, Matt
Settings for O2 UK Kies Reg Patcher
SoftwareRevision
was
I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1
ProductCode
Was
GT-I9000HKDO2U
HIDSWVER
Was
"I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1"
DEVCONINFO
Was
" MN(GT-I9000);VER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);HIDVER(I9000ADJM1/I9000O2UJM1/I9000ADJM1/I9000ADJM1);PRD(GT-I9000HKDO2U);SN();IMEI(***********);PN(*********** );CON(AT,
Updated O2 firmware and using Kies Reg Patch take the chance to save the downloaded rom .
jje
Alright so I like to mess around with my phone a lot and have flashed many ROMS and whatever but am now going bqck to stock eclair 2.1 (which I downloaded from samfirmware.com) and I had trouble with the australian 2.2 from their site and kies won't give me an update can someone help me get kies to update my phone? thanks
Sent from my GT-I9000 using XDA App
Kies probably cannot find the correct network provider details on your phone to match any provided upgrade .
As you no longer have the supplied rom you will need to try the Kies Registry patch /Spoof post .To fool Kies into thinking its a genuine firmware for your phone .
jje
Hi all,
I'm fairly new to the flashing world and need some guidance.
Current rom:
MODEL NUMBER GT-I9000
FIRMWARE VERSION 2.2.1
BASEBAND VERSION I9000XXJPY
KERNEL 2.6.32.9 root (at) SEP - 51 #1
BUILD NUMBER FROYO .XXJPY
Old Rom:
It was from vodafone, but i can't seem to find exactly what rom it is.
I had a problem with my stock SGS rom and was forced to flash it, but i now have a different rom installed on my SGS, the booting animation (for example) isn't from vodafone anymore.
And KIES doesn't recognize my current rom (for update), so i wanted to know how could i leave everything exactly like it was before. So that i could update to gingerbread the official way and still have a fall back plan.
One last thing, i used odin (v 1.3) to flash it, can i "safely" reverse from 2.2.1 to 2.2 (original from vodafone)? And how?
Thanks again for the help.
I'm very sorry for the long text.
Just use the wonderful & usefull searchbox and find this:
Rom list
Thank you for the reply, i've been on that thread, but still i don't know which is my rom and if the csc will be return to stock.
Thank you again
Sent from my GT-I9000
Stock is not the rom that came with the phone its stock Samsung rom .
You need to have saved your original rom or find somebody that did .
Your Vodaphone upgrade path through Kies will fail as you do not have a Vodaphone rom .
2.2 to 2.1 via Odin with pit 512 and repartition checked .Just use 2.1 rom from samfirmware .
May help .
http://forum.xda-developers.com/showthread.php?p=11963455
jje
Thanks for the fast reply,
Are there any special precautions or guides to revert from 2.2.1 to 2.2?
With the csc. (i've flashed before but i only had one tar file, nothing else).
Sent from my GT-I9000
2.1 revert from 2.2 just flash should be ok problems reflash with pit 512 and repartition checked .
jje
Also dont be to scared of vodafone. If you have a stock Samsung android, instead of the Vodafone, you still have warranty. Only thing that can happen is that when you send your phone in, they'll flash a Vodafone rom back on and you'll be having all the vodafone crap back on it.
Really? That's the best news i've heard, since i had this problem. Thanks a lot, how did you know this?
Regards,
Solid Snake
Sent from my GT-I9000
The terms and conditions do not say you can flash any old rom and not break your warranty .
The position is one with a stock rom you may get away with warranty repairs but it will depend upon who you take it to and even the guy picking up the phone .
Samsung service centre and they may well repair .
Vodaphone service centre and its clear that they do not have too repair as you have broken your terms of warranty with Vodaphone .
So rule one is a back up of your original rom will nearly always be the safest path it also allows you to use the Kies method for official firmware updates if you want to revert back .
jje
Solid_Snake.Pt said:
Really? That's the best news i've heard, since i had this problem. Thanks a lot, how did you know this?
Regards,
Solid Snake
Sent from my GT-I9000
Click to expand...
Click to collapse
Experience: I messed up 2 of my previous phones (SE and HTC) due to flashing firmwares and brought them to T-Mobile and Vodafone, telling them the phone got stuck in boot. They took them in and when I got them back, they had Vodafone and T-mobile firmware on them again.
But as jje stated, its offcourse always the best to have a backup of your phones firmware. Its always possible some annoying Vodafone guy pops up, and makes a big deal out of it.
Thanks for all the input,
I never wanted to flash my sgs, but i screwed up the original rom and the phone didn't boot so it was my last resort.
Due to that i didn't make a backup.
In kies i have my rom as KOR and it says that i can't update, if i that *#272#imei code and put it in XEU, would it work? In theory.
Sent from my GT-I9000
Is there a way to download ROMs from the Kies server so that they can be flashed manually at a later date? I'm thinking that if I need it, I can flash back to the latest H3G branded firmware for warranty purposes.
alexhull24 said:
Is there a way to download ROMs from the Kies server so that they can be flashed manually at a later date? I'm thinking that if I need it, I can flash back to the latest H3G branded firmware for warranty purposes.
Click to expand...
Click to collapse
Their is a post in general regarding Gingerbread JVH and downloading that via FUS . You will need to educate yourself as to how .
jje
Hi if someone can help id really apprteciate it. Dunno why this is confusing me so much.
Anyway I want to put stock uk firmware on my galaxy s so I can sell. Pretty sure it was the unlocked stock firmware.
I tried doing the reg hack on kies - it finds update and then says device version wrong.
I tried using spooffw - for some reason it updates the pda ok but doesnt update phone/csc (click ok and it reverts back to whatever it was on before)
I tried installing JM1 from samfirmwares and whent into kies and again says cannot update on this device.
Can anyone tell me what I need to flash onto this bloody phone so I can get kies to upgrade to the oficial fw.
I would like to put on a 2.1 rom and then have kies upgrade then I know its stock. I downloaded jf3 but that didnt come with phone or csc ? where would I get them?
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
taha_e said:
first of all its not a bloody phone
then why you want to use kies? you can flash a rom by odin easily, just do some study for how to flash a rom and proceed,
kies sometimes have strange behaviours, personally I never used kies after I tried it once
Click to expand...
Click to collapse
Hi flashing a rom isn't the problem but flashing a rom that makes my i9000 appear un tainted by custom roms etc is where I'm having the difficulty. I wanted to do the final update via kies then I would know that kies thinks my phone has genuine firmware. If it wont update via kies then this is a clear message that the phone has been tampered with and I may not get the money from the company.
JJEgan said:
I take it you want not the stock rom but the rom provided by the phone provider .
Two routes one replace the original rom you saved .
two flash stock rom lower version than current rom on Kies . Use a method of spoofing the correct codes for the original product .
Kies only updates if the correct codes for product firmware device and hardware are showing . Once you go the unofficial flashing firmware route Kies may not find these codes until you find the correct codes .
Stock = Samsung firmware Original = network branded that came with the phone .
jje
Click to expand...
Click to collapse
You are right I want original firmware. Main problem is I have no idea what this would have been. I didn't make a copy as my first upgrade involved doing a kies reg hack before there were any custom roms and I stupidly didn't take note of what I was currently on. What I do know is that my phone has never had any operator logos or software on it. (unlike my gs2)
I have tried doing the reg hack on kies 2.0 but apparently thats not properly supported yet (can I use an older kies 1.5 or something? or will it ask to be upgraded?)
I have tried using spooffw but step 3 (where you set phone and csc) doesnt work, when you press ok is reverts back to whatever it had on before no matter the value you enter.
Does anyone know of an o2 stock firmware that has been uploaded somewhere? ideally with pit, csc modem and pda. then I can hopefully use odin and then confirm that all is ok in kies?
Or if I am going to go the spoof route (probably with kies 1.5 as 2 is not playing ball) does anyone know what values I should use for each?
Thanks
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
azzledazzle said:
well on www.samfirmware.com there is a list right at the bottom for provider FW, maybe one of them is o2 firmware, check it and see if any of them stand out as the one you had firstly.
why do you need o2 firmware specifically ??
you can sell your phone with JPY 2.2.1 stock and no one would be the wiser .
Click to expand...
Click to collapse
jpy? so is that a firmware you could actually get on a device brought in uk? which specific download should I choose? Once downloaded and flashed if I connect to kies will it be able to do future updates?
EDIT woohoo I did as you said and used UK JPY found here
http://www.multiupload.com/PZNPALHVDW
and its now being picked up in kies saying latest firmware installed. Excellent now I can sell it without worrying.
bit sad it was definately the best phone ive owned and there still doesnt seem to be much out there that can push it to its limits (let alone the s2) still the extra screen size and better pixel layout are definately worth the upgrade.
Thanks everyone for your help.
If thats not it i uploaded O2 JPY within the last month linked in two posts .Dont know where though .Its probably mine on Sammy anyway .
Flashed direct as PDA via Odin . If problems after with modem . Unzip file extract modem flash file again as PDA and also the modem file is what i did .
jje