Database Develop

[Q] Help With Custom Rom installation.

Hi there,
Since gingerbread with most probably be the last update for SGS i would like to install a custom mod.
Now i have been trying to do this (darky 10 RC4) for the past 2 days.
I followed Darky's instructions then i had a problem with the CWM only accepting "edified" script.
So i downloaded rom manger and tried to downgrade ta 2.5 but as soon as i tap on the 2.5 it immediately comes up with an error, "an error occured while flashing your recovery."
this is done on a 2.3.3 JVB SGS with CWM 3 installed (orange text).
Are there alternate routes? maybe downgrading to android 2.2 installing an older version of darky and than upgrading the darky rom?
any help is much appreciated.
thanks

Download the rom CWM-zip and put it in your internal sdcard.
Download some froyo-kernel (yes, froyo) with CWM 2.5. Speedmod for example. Then flash it with Odin repartition and auto-reboot unticked. When the flashing process is completed, pull the battery and then boot to recovery (3 button combo). Now you have CWM 2.5 and you can flash the CWM-zip from there.

thanks, i wil try that.
Now you have CWM 2.5 and you can flash the CWM-zip from there.
Click to expand...
Click to collapse
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?

jan-sgs said:
thanks, i wil try that.
just 1 question, why do i need t flash CWM-zip if i am already on CMW 2.5?
Click to expand...
Click to collapse
Sorry. With CWM-zip I meant the Darky's Rom.zip, which can be flashed through CWM.

it didnt work, u just gave up.
hopefully some new rom update that is edified will show up in a couple of months

Install supercurio hacked kernel, it has recovery 2.5 instead of 3.0.0.5. From there you should be able to install darky's rom. If the new version of his kernel is recovery 3, tell me i'll send the old one just for the purpose.

Hi,
ok last attempt
i flashed ( odin PDA, no pit and no repartition) with this link:
Kernel Download:
Gingerbread-GT-I9000-stock-kernel+hacks.tar
http://forum.xda-developers.com/showthread.php?t=975349
while i was on
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
rooted with root CF-Root-XX_OXA_JVK-v3.1-CWM3RFS
and lag fixed with CF-Root-ext4-v1.2
and it forking worked red text 2.5 THANKS A BUNCH!
edit just a problema. it is only booting in CWM.
reattempting this without the lag fix.
2nd attempt with PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
and without lag fix not rooting.
phone stuck looping at booting with strange sound on each boot loop
3rd attempt with rooting, but no lagfix

If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.

chadouming said:
If you are only rebooting in recovery, did you flash the new kernel, then reboot recovery ? if yes, the easy way to get out, is to reboot in download then reflash the wanted kernel (Since your rom is installed, you can install any kernel (GB of course)) then, it will reboot in recovery again and just reboot system now. This should fix your problem.
edit : Dont forget to get CF-root 3.1 for JVB and not JVK.
Click to expand...
Click to collapse
ok, i couldnt do that before because i had deleted the rom form the internal SD.
and also thanks for pointing out that i had the wrong root (i worked by you never know if it could case problems)

ok so
PDA_I9000XWJVB - PHONE_I9000XXJVK - CSC_I9000XEEJV3
root CF-Root-XW_XEE_JVB-v3.1-CWM3RFS
lagfix CF-Root-ext4-v1.2-Addon
and
Gingerbread-GT-I9000-stock-kernel+hacks
and the zip is in progress.
ps it wasnt stuck the previous time, i was pressing the middle key as the selection while i should have been pressing the power button.
thanks for your help very much appreciated.
if i get some free time i will write at tutorial since i could not the solution.

This isn't development, moved to Q&A

Gingercriskelo installation guide

Hello Criskelo's fans and friends.
I'll make a little guide for people who want to flash Criskelo's Ginger ROM (CGR).
I am not a noob neither a developer so i need some understanding.
If i make a mistake please correct me.That's for now lets start.
FOR NEW USERS:
MAKE SURE YOUR PHONE CAN REACH DOWNLOAD MODE
POWER BUTTON,VOLUME DOWN BUTTON AND HOME BUTTON (you'll see a yellow sign)
ΜΑΚΕ Α BACK UP OF YOUR CONTACTS,SMS.MMS ETC
Download JVQ from here http://forum.xda-developers.com/showthread.php?t=1011901 (Thanks Ramad)
Double click to extract and put in ODIN
PDA=PDA PHONE=PHONE CSC=CSC
Check repartition and put as pit the file attached(auto reboot and reset time default checked).
Put your phone into download mode and connect to pc
When it is connected you'll see a yellow light
In this point make sure that kies are not running in the background,if they do close them and run the procedure again.
Press start and let the phone boot.
PUT GINGERCRISKELO ROM ON THE ROOT OF SD CARDWhen done power off or pull the battery out and put your phone in download mode again.
Untick repartition untick auto reboot no need for pit file.
Put as PDA the tar attached(Thanks Ficeto)
When in odin say pass pull the battery out and press
VOLUME UP, POWER BUTTON AND HOME BUTTON,when you see the galaxy s sign release power button to get into recovery mode.
With volume buttons you go up and down to the menu and with power button you choose.
Wipe data/factory reset
install zip from sd card
choose zip from sd card
CRISKELO V76.zip
Wait for install
reboot and enjoy your new 2.3.4 JVQ rom.
FOR USERS COMING FROM OTHER GINGERBREAD CUSTOM ROM 2.3.3 AND UP:
Put the zip in the root of your sd card
Remove lagfix
Reboot in recovery mode
Make a nandroid back up
Wipe data/factory reset
Install zip from sd card
Choose zip from sd card
Choose Criskelo v76.zip
install reboot enjoy.
FOR USERS COMING FROM FROYO 2.2 OR 2.2.1
Follow the first procedure
DISCLAIMER:I'M NOT RESPOSSIBLE IF SOMETHING HAPPENS TO YOUR PHONE
READ AND READ AND READ THE GUIDE AGAIN AND AGAIN AND AGAIN.
If anyone got into trouble feel free to pm me.
CREDITS
darky(from him i learned the basics and put the first rom in my galaxy)
hardcore
chainfire
supercurio
criskelo
neldar
ficeto
codeworkx
tk glitch
zacharias maladroit
pauldiddy
crysis21
00.ante
dhiru1602
fr4gg0r
dagr8
ragin
and all other developers and themers for making our SGS fuctional and beautiful
if i forgot someone pm me and i'll put where u belong
download pit and odin from here
http://forum.xda-developers.com/showthread.php?t=832827(Thanks ragin)
The most important i forgot the link for the rom
HERE http://forum.xda-developers.com/showthread.php?t=978354
ATTENTION: This is exactly the same way to flash any other custom samsung rom.
You can't flash with this procedure roms like CM7 MIUI AND ALL OTHERS ROMS BASED ON CM7.

In first procedure in recovery (vol up + power + home), DON'T do a factory reset !
First, with repartition in Odin everything should be clean and second a factory reset seems to remove "sim toolkit" app and at next boot you'll be stuck at "Unlocking sim card" step.
Please, edit this tutorial or add "sim toolkit" app in the rom.

Wendigogo said:
In first procedure in recovery (vol up + power + home), DON'T do a factory reset !
First, with repartition in Odin everything should be clean and second a factory reset seems to remove "sim toolkit" app and at next boot you'll be stuck at "Unlocking sim card" step.
Please, edit this tutorial or add "sim toolkit" app in the rom.
Click to expand...
Click to collapse
I flashed 76 on 75 without flashing JVQ. is it wrong? everything work good.

http://forum.xda-developers.com/picture.php?albumid=4242&pictureid=14015

please help i just downloaded the JVQ softwere from the page u puted
http://www.multiupload.com/RTT74XVG7E
i extraxted it but there isnt a pit file ?
from where i can download it ?
and another thing i have a stock JVQ downloaded from www.samfrimware.com
can i put it insted of the JVq that i downloaded form here http://www.multiupload.com/RTT74XVG7E
???

This guide is wrong man!
You gonna put newbies in trouble!
Please remove this thread

what's wrong with it?
i followed it to the letter except the factory reset in recovery (for the causes Wendigogo already mentioned) and everything is working fine.

I am using a Galnet Twooey III (2.3.5) with Gingerbread bootloaders.
Do I need to go back to Froyo bootloaders?
Or the only thing to do is just to flash the CGR v79 using CWM?

Niccon said:
I am using a Galnet Twooey III (2.3.5) with Gingerbread bootloaders.
Do I need to go back to Froyo bootloaders?
Or the only thing to do is just to flash the CGR v79 using CWM?
Click to expand...
Click to collapse
Same here , someone please submit a reply ??!?

I was in a bootloop with your guide.
Treid then installation of darky rom and after that comes criskelo....worked.

help..
hey guys plz help me i am put rom zip file in external sd card but in the recovery external sd does not open..tell me how to open external sd or how to put rom zip file in to sd card(phone meomry) plz help me ..

Hi,
currently I am using v77 with darkcore 2.9 that matches jvq.
what is the procedure that I need to follow to install v79?
install v79 from cwm-> replace kernel to darkcore 3.1?
or install stock jvr->replace core to darkcore 3.1-> install v79 from cwm-> replace core?
or any other solution?
thanks a lot!
Ofer

oferfg4a said:
Hi,
currently I am using v77 with darkcore 2.9 that matches jvq.
what is the procedure that I need to follow to install v79?
install v79 from cwm-> replace kernel to darkcore 3.1?
or install stock jvr->replace core to darkcore 3.1-> install v79 from cwm-> replace core?
or any other solution?
thanks a lot!
Ofer
Click to expand...
Click to collapse
Just flash it from cwm, than flash the JVR compatible kernel of your choice

FulRom NoWipe V77 Versión Final - how to install
Hello
I have an samsung galaxy i9000 with
Gingerbread 2.3.3: JV9 - JVO - JV7
I downloaded the file
FulRom NoWipe V77 Versión Final: CriskeloRom_GINGERBREAD_v77_I9000-I9000T-I9000M.zip
Lets try it...

After installation
This is a GREAT ROM.
I am really happy with it.
Very awesome.
Everything works fine!
And my i9000 has bekomme even faster, so I can underclock for saving battery.
Keep up the good work.

Finally after all joy of this mod I have some suggestions.
I am using the version v77.
When trying to apply the battery mods or the blue theme, the phone loops while talking to the SIM card. Only way out, to restore my backup.
There might be the possibility, that I did not read enough about the battery mods, however, my knowledge of spain is zero.
Another question. I like the gel type style of buttons, as shown in gingercriskelos adress tab. I themed a lot for nokia. Would it not be nice to use this kind of tabs (buttons with gel effect) for the selected tab at any modus?

dark side of dark core
I am happy with v77. My prob. unfortunately i used a ext4 and forgot to reset!
When I saw v79 I tried it.
Install ZIP from SD Card.
I did not consider, that another kernel was included: Darkcore.
I end up with the astronaut.
All my cwm backups became unusable.
So I went for a clean gingerbread install and put v77 on top again. So I lose my product code.
Why didnt you stay with the old architecture, so that users can follow upgrades easily with cwm zip without wipe.
best regards
jodahush

not much movement in this thread anymore. People moves to v79
Just want to mention, that I can install battery and theme mod now.
My problem was the ext4 lagfix i used before.
I am interested to know, how those mods works with darckcore, since this thig is allways lagfixed. (v79)
Criskelo seems to move to Galaxy S2. I hope somebody continue his great ROM

I installed as per guide but I don't have google maps and don't know how to Install it?!!
tia

Heeeeeeeeeeeeeeeeeelp!
When flashing to JVQ, all went well and i got pass & reset on odin, but then on my phone, i got failed to format & got stuck on the samsung logo screen.. please heeeeeeeeeeeeeeeeeeeeeeeeeeelp

[Q] Noob please help me upgrade SGS from E 2.1 to GB 2.3

Hi,
After some help please, I am trying to upgrade from android 2.1 to gingerbread.
I have managed to get root access on my Samsung galaxy S i9000. I did this using the 'Galaxy S I9000 One-Click Root.exe' tool.
Then I installed Rom Manager via an .apk install (couldn't find the free version in the market for some reason).
After this I downloaded the busybox installer/updater and updated busybox to the latest version available.
Now I am having problems as when I run rom manager and try to run 'Flash Clockworkmod recovery' it goes through the process and when I reboot into recovery (using rom manager as I can't get into recovery using three button combo) it doesn't have the CWM recovery its just the standard one.
Also if I try to backup current rom (thinking this is a nandroid backup?) it reboots into recovery and just sits there and doesn't do anything.
Can someone please help, tried doing lots of research but am getting very confused as to what to do next.
Thanks in advance.

Boost. Haven't you heard....its the new bump!
Any help would be much appreciated.

Check Ramads stock collection:
http://forum.xda-developers.com/showthread.php?t=1102881
1.) Backup /efs folder
2.) Check that USB driver is working OK when connecting SGS to Windows in download mode
(no? - disconnect, find drivers, download, install)
Yes? :
3.) Flash in download mode using Odin + 512.pit + 2.3.x ROM + Sbl
You must use ROM with Sbl.bin = 2.3.x bootloader when going 2.1 -> 2.3
If no download mode by pressing (vol- home pwr), use XDA search for this fix.
Sent from my GT-I9000

Hi,
Thanks for the response.
I have now managed to successfully fix the three button combo issue so can get into download mode and have backup my efs folder.
Before I flash I would like to do a nandroid backup. I installed rom manager but still can't get CWM to install sucessfully. It says download successful when run from the rom manager option (flash CWM recovery) but when the phone reboots the CWM isn't there is just the stock options. Any ideas as to why this is or how to fix?
Many thanks in advance.

I have sorted my nandroid backup. I didn't realise that once you downloaded the CWM you had to do a manual install from stock recovery using the update.zip. Soon as i did this it was ok.
Now going to flash using odin v1.82 + 512.pit and Gingerbread 2.3.5 europe rom GT_I9000_XFJVA_XXJVT_OXFJV1_Sbl
Will make sure re-partition is checked.
Hopefully all will go well. Will post update after update.

jrdunn78hawk said:
Hi,
After some help please, I am trying to upgrade from android 2.1 to gingerbread.
I have managed to get root access on my Samsung galaxy S i9000. I did this using the 'Galaxy S I9000 One-Click Root.exe' tool.
Then I installed Rom Manager via an .apk install (couldn't find the free version in the market for some reason).
After this I downloaded the busybox installer/updater and updated busybox to the latest version available.
Now I am having problems as when I run rom manager and try to run 'Flash Clockworkmod recovery' it goes through the process and when I reboot into recovery (using rom manager as I can't get into recovery using three button combo) it doesn't have the CWM recovery its just the standard one.
Also if I try to backup current rom (thinking this is a nandroid backup?) it reboots into recovery and just sits there and doesn't do anything.
Can someone please help, tried doing lots of research but am getting very confused as to what to do next.
Thanks in advance.
Click to expand...
Click to collapse
For flashing a stock rom follow this video guide : Stock ROM Flashing
For flashing a custom rom follow any one this video guide: Custom ROM Flashing

HI,
I have now sucessfully upgraded to Gingerbread 2.3.5 europe rom GT_I9000_XFJVA_XXJVT_OXFJV1_Sbl
the problem I'm having now is when someone calls the screen just goes black (it doesn't turn off) and I can't answer the call. Also when the call ends there is no record of it in the missed calls so i can'e even see who it was who was calling.
Please help asap as I cant answer any calls or ring them back to tell them.
Thanks

All ok now. I did a factory reset which has sorted it. Phew! lol

[Q] sgs cwm recovery problem

hello .
i am using galaxy s i9000 , with stock ddjv9 , n speedmod kernel .
i flashed speedmod kernel n i was able to reboot into cwm recovery using 3 buttons .
then i installed rommanager from market but it was not recoznising the cwm recovery version , so i flashed cwm recovery again frm rom manager .
but when i select reboot into recovery or back up rom frm rom manager it reboots to stock 3e recovery , n doesnt perform any backup .
i can still boot into cwm recovery 2.5.1.2 using 3 buttons .
plzz help . i want to use rom manager to perform backup .

Forget from manager and you your recovery to perform a backup. It's called a nandroid back up, it saves your whole system in its current configuration.
You restore this backup if something goes wrong and you can't boot up to your home, but you can still use recovery. If you want to backup apps and stuff then use other means such as titanium backup. If you want specific backups then let me know and I will give you a list of what i use.
As far as I know rom manager does the same thing however automates it so you don't have to go to recovery and go through the selections. Another thing you may need to be aware of is if rom manager doesn't recognise your recovery, any backup you attempt to make may be corrupt and un usable. If you want to fix recovery you may need to reflash your kernal. Not just CWM. This should retain all data and settings.
Hop that helps
Sent from my GT-I9000 using XDA

But i cant do back up frm cwm recovery too . Its reboots into 3e recovery n nothing happens .
I want to use rommanager to flash custom roms after making a backup .
So my main aim is to make cwm recovery working thru rom manager .
My rommangaer can detect cwm recovery . After i selected flash recovery frm rommanager. But cant reboot into it or do other functions.
Plz help. With steps to perform.
Sent from my GT-I9000 using XDA

i have same problem i think .
1. i tried to install a new rom downloaded it and put it into phone & sd card.
2. i have tried to apply update from sdcared first i found it it seems to run fine but after that phone keep turning on seeing "galaxy s i9000 " and than showing it again in loop .
3. i can get into clockworkmod recover v 3.0.0.5 by pression those 3 buttons.
4 . when i plug it into the computer i cannot do anything with the data.
hope someone can help me.
and sorry if that is not connected to the thread
thanks~!.
p.s
my phone is rooted

dhillon7 said:
i can still boot into cwm recovery 2.5.1.2 using 3 buttons
Click to expand...
Click to collapse
Thought you could get into this recovery??
Are you saying when you use the 3-button combo to get to this recovery it works, but then trying to make a backup does not work??
To fix recovery...
Talon26 said:
If you want to fix recovery you may need to reflash your kernal. Not just CWM. This should retain all data and settings.
Click to expand...
Click to collapse
dhillon7 said:
I want to use rommanager to flash custom roms after making a backup.
So my main aim is to make cwm recovery working thru rom manager.
My rommangaer can detect cwm recovery . After i selected flash recovery frm rommanager. But cant reboot into it or do other functions.
Click to expand...
Click to collapse
So what your saying is although rom manager detects it (recovery), it is useless as you cannot get into it to make a backup via rom manager
I suggest first go to manage apps and clear data for rom manager>>>open up rom manager>>>make a backup.
*CWM not detected?>>>flash via Rom manager>>>Backup...Remember because you are on stock your device is Galaxy S not Galaxy SMTD. As i believe MTD is for cyanogen based roms (I am 99% sure of this)
*If this still does not work, clear data again>>>do not open Rom manager but turn off phone>>>go to recovery (via 3-button combo)>>>Backup/restore>>>backup
If that does not work then Reflash your kernal as you did before, or any other kernal that you want that is compatible with stock roms. You will probably need Odin flashable kernals as your CWM is not working. You can try flash the kernal via rom manager, not sure what the result of this would be if CWM is not being installed properly. Instructions for installing the kernal will be from where ever you download the kernal.
So all the above should enable you to bypass Rom manager for the backup, or fix the backup/recovery which should fix the rom manager backup/compatibility whatever issues, Hopefully
HarryGN said:
1. i tried to install a new rom downloaded it and put it into phone & sd card.
2. i have tried to apply update from sdcared first i found it it seems to run fine but after that phone keep turning on seeing "galaxy s i9000 " and than showing it again in loop .
3. i can get into clockworkmod recover v 3.0.0.5 by pression those 3 buttons.
4 . when i plug it into the computer i cannot do anything with the data.
hope someone can help me.
and sorry if that is not connected to the thread
thanks~!.
p.s
my phone is rooted
Click to expand...
Click to collapse
What do you mean the phone runs fine?? Did it ever boot up properly, as in get you to the home screen??
Have you tried reflashing the rom via recovery as you said it works...
If you use ADB you should be able to transfer back and forth, but there is a fairly long winded process to set it all up! However after this it should be easy..
If that doesn't work restore your backup which you should always make before flashing! (Im guessing your in this situation because you didn't do that? )
So if you don't have a back-up get an odin flashable rom either from stock firmware on sammobile.com or from the general forum where Ramad has made an extensive collection. Also you could flash DarkyROM 10.2 RE Odin ROM which is a custom rom and odin flashable..

I have heard frm sumwhere that we have to apply some update.zip two time to make cwm recovery working on sgs. Is it true ?
N which update .zip?
After reflashing kernel . Should ma rommanager detect recovery automatically or i have to do sum thing?
Sent from my GT-I9000 using XDA

n plz i dont want to bypass rom manager ,
i want to use rommanager , help me to make cwm recovery working thru rommanager .
i tried clearing data frm rommanager but it didnt helped .

dhillon7 said:
I have heard frm sumwhere that we have to apply some update.zip two time to make cwm recovery working on sgs. Is it true ?
N which update .zip?
Click to expand...
Click to collapse
Have not heard of this... Sometimes you do have to flash roms twice that have kernals to avoid problems which may be what you are talking about. All custom kernals use CWM as it has many extra features. If you follow the instructions of the rom/kernal you should never have any problems.
dhillon7 said:
After reflashing kernel . Should ma rommanager detect recovery automatically or i have to do sum thing?
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
It should work, possibly its a problem with the kernal I'm not sure. But I can say that every time i have installed and used Rom manager (I dont usually use it, so i uninstall it ) I have had to re-install CWM. What happens is i get a popup telling me to install the latest CWM, I then have to pick my device, I do so and then the pop up just disappears and all downloads are available to me. So in my case it doesn't even look like it installs anything as it doesn't reboot etc.
Soooo the answer is that it will probably tell you that you need to install the latest CWM, so just follow the prompts and if it installs the latest then great. Hopefully it will work after this. If it doesn't you may have to try a more recent kernal. If that still doesn't work, then use Odin to flash a rom.
Odin flashable custom rom that usually never fails for anyone This rom is usually recommended to people with problems. After this you should have CWM and be able to use Rom manager like it should be used
dhillon7 said:
n plz i dont want to bypass rom manager ,
i want to use rommanager , help me to make cwm recovery working thru rommanager .
i tried clearing data frm rommanager but it didnt helped .
Click to expand...
Click to collapse
Why are you so attached to rom manager?? You think its safe? Probably agree but you may have to dump it for the first flash and then get back to it once you can get it working.. If changing kernals doesn't work then it may be your stock rom, and to change will either have to be odin or a zip via recovery...
Hopefully all goes well, Good Luck
REALISATION...
This is all because you cannot get a backup... If the above does not work then forget the backup and just flash the rom via rom manager. Because even if you have the backup you wont be able to use it as you don't have a CWM recovery right??
The apps i use for backup
App list backup
Sms backup and restore
titanium backup

Need help with Alliance ICS Final ROM

Hi all,
I'm sorry if I posted in the wrong place but as a newbie I cannot post in the thread of the ROM I have trouble with.
So, atm I'm trying to flash Alliance ROM Final ICS to my N7000 but I'm having some troubles with it. I have followed all of the instruction correctly, I have tried installing it either via ROM Customizer or CWM.
With ROM Customizer: when I was trying to flash the zip file then the phone reboot and takes me to the recovery window with error notification.
With CWM: After flashing the kernel (I tried both with Speedmod 3-13 and also Hydracore 4.3b STD), reboot to recovery, wipe data/factory, wipe cache partition, wipe dalvik, and then flash the ROM zip file. The ROM installed and says it finish. Then I choose go back and reboot the system. However, instead of continuing to install and to show Alliance bootanimation, the ROM that actually loaded is my old ROM which is Chrack 14 (also with Chrack bootanimation).
So basically, even though it looks like that the ROM successfully being installed, the fact is it failed. It looks like that this Chrack ROM very persistent to be uninstalled from my phone
Do you guys have any ideas what's happening here and what could be the problem?
FYI, my current ROM is Chrack 14 with Speedmod 3-13 as the kernel.
I really need your help guys. Believe me, I won't hesitantly ask you questions if I haven't read and follow instruction which are given by the developer of the ROM about how to install it correctly.:cyclops:
Really appreciate any inputs or solutions for my problems.
Thanks in advance guys.

boot into recovery and go to mounts and storage > then format system,data and cache. this will clear up the old rom. then try to install Alliance again.
Note: this will erase the system partition and there will be no rom to boot with if the install of new rom failed. so make sure you put all the required files in the phone before doing the formats. also to be extra prepared another rom may be.

Thanks for the reply. Uhm, what's the risk should it failed to flash the new ROM? And what will be the solution should it really fails at the end?
Is there any other safer options and maybe anyone can explain the possibilities that causing my current problem?
Also what do you mean by "the required files" here? And where i should put the files? In the internal memory or sd card?
Sorry for the noob questions.:banghead:
Sent from my GT-N7000 using Tapatalk 2

what's the risk should it failed to flash the new ROM? And what will be the solution should it really fails at the end?
Click to expand...
Click to collapse
Not much.. only you need to install a different rom or boot into download mode and flash a stock rom using PC odin
Also what do you mean by "the required files" here? And where i should put the files? In the internal memory or sd card?
Click to expand...
Click to collapse
i mean the files required to flash the rom.. and CWM can flash from both storages so it really doesnot matter