Database Develop

[Q] Whats your ideal case for the NC?

What is the ideal case for your Nook Color?
Is it one that is available or not?
What are some of the features you would like it to have?
Do you want a fold case that covers the screen?
Is the micro usb port in a convenient location?
Looking for some ideas. Working on a shell now for a mold. Not sure if anything will come of it but want to see what you all are looking for in a case. Feel free to post your thoughts. Thanks.

I would like to see a one sided hard cover that can protect the screen when not in use and snap onto the rear when in use. Probably use the typical four corner frame system you see in many cases so nothing is obstructed.
Also, have a stand "system" so that when it is snapped to the rear you can prop up the NC. Maybe something like what you see on back side of keyboards. And like some keyboards I've seen, have different levels of lift. One lift level that slightly raises the NC off the surface, for typing and such. Another lift level that is like the leg stand you see on the EVO 4G or Archos 70, for video/picture viewing and the like.
Heh. First post around here. Been meaning to chime in on a thread and this is the perfect one to start. Only because I've been looking for something I described but there is nothing out there yet.

I'm looking for an inexpensive silicone gel skin, something I'd keep on pretty much all the time. I'm also keeping my eyes open for sturdy travel case.
There seem to be choices out there for both, I'm just waiting a bit for more of them to hit ebay.

I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.

drp1 said:
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
Click to expand...
Click to collapse
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.

techboydino said:
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
Click to expand...
Click to collapse
Are you designing desktop/multimedia cases as well? I would love additional speakers on the NC and also a magnetic swivel X mount stand for desktop use.

My ideal case is not available yet. It is an envelope-like case that will allow me to pull the Nook out and use it naked. Something in nice black leather.

Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.

A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev

bugeyed1 said:
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
Click to expand...
Click to collapse
Good Idea, I may try that out.
Im not any sort of professional or anything, but I do have access to some pretty sweet resin's and molding equipment. Carbon fiber is the idea, but the glass mold and how I want to do the front part comes first. Ill keep the thread updated.

ideal nook case
looking for something very close to this case
http://www.amazon.com/gp/product/B0040VNRTG/ref=oss_product
just substituting the swivel belt clip for a kickstand
i like the idea of moving the usb jack to another spot but i think that would add alot of cost and effort to the case build

Rube Goldberg lives; or, is this even possible?
You asked for the ideal, here is mine. Not at all sure it is doable....
1. In the interest of keeping the total package as slim as possible, no back, unless it is necessary to support other features.
2. [Front] cover has a slot for a pad of paper and/or corner slots for index cards.
3. [Front] cover is hinged on the right (I'm right handed and I want to be able to write easily).
4. [Front] cover has a foldover flap to keep the paper or cards from contacting the screen when the cover is closed.
5. The cover can fold 180 degrees so that the cover lies flat against the back of the tablet.
6. The cover can support the Nook as an easel in landscape mode.
7. The cover can support the Nook as an easel in portrait mode - this might involve some sort of short extension legs or other support to raise the lower edge of the Nook an inch or so (and this might help with the need to plug in the USB connector at the bottom).
8. Bonus points for the ability to fold out a handle attached at the lower left corner when in portrait mode, sort of like a hand mirror.
9. And of course it should be strong, light, durable, elegant, and less than $40 US.
I'm ready to order as soon as I see the pictures of the finished product.

Thanks for the ideas everyone. Haven't worked on it in a few due to being out at CES. Unfortunately there were NO cases out there. Working with Speck to find something but tried everything else and could not even find a nice slip cover. Otterbox said they are testing designs so no real info there either.

My ideal case is something like
http://shop.brando.com/samsung-galaxy-tab-case-with-bluetooth-keyboard_p05269c0299d057.html
this.
Bluetooth keyboard case, waiting for bluetooth to work for NOOK!! and I could use it as a netbook and a tablet. IDEAL.

This is my cheap (free) case for my nook color. It’s the zippered case for my trucks instruction manual. The patch covers the ford symbol; if I need to hide it in plain sight I can pull the patch off and leave it in the back seat. It fits perfectly and there is a plastic divider on the inside I can put business cards and a small pad of paper (as others have asked). All I keep in it is a set of skullcandy headphones in an microfiber Oakley sunglass bag for cleaning the screen.
michael
-"I learned a very valuable lesson on my travels, Tucker. No matter how bad things might seem..."
-"They could be worse?"
-"Nope, no matter how bad they seem, they can't be any better, and they can't be any worse, because that's the way things fraking are, and you better get used to it Nancy. Quit yer *****ing."

Perfect case for the Nook Color
Before I bought my Nook, I had a Pandigital Novel that I bought on eBay.
In the same eBay search results page the Novel appeared on was a great case called BookArmor. Although it was $35, I bought it. And I haven't regretted it either.
The BookArmor case comes with a set of velcro-like pads that stick on the back of the tablet and allow it to be fixed to the case. The case itself is laminated steel and plastic covered with textured fabric. It zippers shut and the zipper sides are soft and stay out of the way when the case is opened. You have total access to all side buttons and ports. The inside surface that comes in contact with the screen is covered with a soft foam pad.
When I decided to get the Nook, I found out that the case I had for the Novel is the exact same case for the Nook Color. I really like this case and haven't even considered another one.
For more info go to extremeinkjet.com and click on BookArmor cases in the blue left-hand column. Pick any Delta 6 case ... there is a Nook Color one. Checkout their video at the bottom of the page.
It looks like this case is really popular too ... there aren't any left on eBay and the extremeinkjet site shows all out of stock for the Delta 6 case. Amazon shows one Delta 6 left for the Pandigital (same case) but it doesn't even show up for Nook Color.

I don't know if I'd call it perfect. But, I bought the B&N case with the vertical flap and ribbon with magnet on the end to hold it closed/open. It works well for me.
If they were available in store when I bought my nook, I would have also considered the silicone one. Although, if I went that route, I'd probably prefer the otter box version with the hard resin exterior an rubber liner. I would also have considered the black leather pouch one where you completely remove the nook to use it.
Alas, none of these were available to me when I made my purchase so I'm using what I have.
With either the otter box or the silicone I would gain a thinner form factor. But, I would never be able to completely cover the screen. With the pouch one, I would gain the thin form factor when using and would not add much when transporting. But, it's basically just a branded leather sleeve.
In the end, what drew me to the case that I bought was the vertical flap and ribboned magnet. 1 - with the horizontal flapped ones, the magnet does not flip around to hold the flap to the back of the case so it's open like a book with the flap dangling out the right side. 2 - with the vertical one that I got, you flip the cover over the top, move the magnet to the back to hold the cover in place and you have all your nooky goodness to go to town with!
Just my 2 cents.

jlh8733 said:
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
Click to expand...
Click to collapse
Wow...love love love this idea.
This would be great..a hard protective slide case.
This would definitely be a $$$ maker.

I bought a "Industriell Cover in Storm" cover and it works perfectly, very simple, protects the screen, and it's small.

I'm stealing your "DON'T PANIC" sticker on the back idea. thanks for reminding me.

Nook case for Streak 7

I am currently using Jack Spade case however, a lot of Nook (not Color) case fit streak pretty nice. a modification may be required but I am using without any modification because I am not using the main camera.
Especially the power is cover and the bottom touch keys are bit cover but if you get used to fiddle around here and there you can really use these nice cases. Most of designer nook cases are on sale also!!! so go down to your close by B&N and try them out.
*WARNING
Do NOT compare NOOK Color its screen. It will just give you big disappointment. Just happy w/ the case selection.
This will really is a good alternative
1. if you don't use the main too often.
2. if you like fancy cases like me.
3. if you don't mind taking the device out of its case time to time like me(which is super easy because i'm only using one side of elastic band
images.barnesandnoble.com/images/75320000/75324701.JPG
__Not letting me to post HTML img link and copy & paste
I'm actually using the Jack Spade Waxwear model in navy
HERE, on case I would like to RECOMMEND. this case almost look like it was made just for streak!
images.barnesandnoble.com/images/44560000/44566702.JPG
__Not letting me to post HTML img link and copy & paste
there are few other case with that vice on it. it's not perfect but they fit like their 2nd marriage.

You know what?? this is pretty usefull info... i couldn't find a decent case...
P.S: I think archos 7 Internet Tablet cases are a go too... ordered a A7 leather sleeve and will report later...

Nook Case fits DS7
i bought a nook case (not nook color case) and it fits dell perfectly fine. I can even fit the DS7 in such a way that to charge the ds7 i don't have to remove it. ie exposing the charging slot outward.

aravind74 said:
i bought a nook case (not nook color case) and it fits dell perfectly fine. I can even fit the DS7 in such a way that to charge the ds7 i don't have to remove it. ie exposing the charging slot outward.
Click to expand...
Click to collapse
Links, pix please? Which case/product code?

docfreed said:
Links, pix please? Which case/product code?
Click to expand...
Click to collapse
I will do that after I go home. The older nook case was selling 50% off at BN store. i paid 15.34 for it.

here is the link tothe product
gifts.barnesandnoble.com/Sinclair-Cover-in-Night/e/9781615598816/?cds2Pid=37684
place the DS7 in such a way that power button will be at top left corner. That will place charging slot facing ouside and head phone at the bottom. I think the headphone jack is 90% visible but I don't use headjack.

RAM mount for Nook with cover (RAM-HOL-TAB4U)

Hey guys, I know several of you have been looking for good car mounting solutions for your Nook. After looking around, I really only saw two options. A mount from Arkon, and one from RAM. I decided to buy the RAM, as it looked like it would fit my pending Jeep Wrangler install a little better. I ordered it last week, even though it was listed as unavailable. To my surprise, it showed up yesterday. It's part number RAM-HOL-TAB4U, and I bought it directly from RAM.
It's really pretty simple in design. One side bracket is spring loaded, and it's dead simple to take the Nook in and out. Also, the mount I got was designed for Nook's with cases or covers. I don't have one yet, but will as soon as I find one I like. Judging from the amount of room left in the mount, you could double the thickness of the Nook, and still have it fit. It does fit securely without a cover, but it looks a little small sitting in there. The build quality is great, and I'm really looking forward to starting my install. (Of course I'll document that once underway.)

Looks nice. How much did that run you?
Sent from my vision using XDA Premium App

I paid a little less than $32 for it. Shipping was $12, so that certainly wasn't cheap. I wish I could have gotten it from Amazon, maybe it would have qualified for Prime free shipping...

FYI, This is also available at Gpscity dot com. In the search box type the word: Galaxy. choose one of the three items.
and use coupon code: ramlivechat or ramemail5 for a 5%off
(UPDATED 5/30) just recieved my holder from Expressmounts aka Gpscity (RAM-HOL TAB5U) It DOES NOT FIT even though at the time it clearly mentioned on the site it was compatible with the nook color with no case, it has now been edited/deleted on their site.
On another site Ram-mount dot com its showing product # (RAM-HOL TAB2U) as being compatible for the nook color , for what its worth.

Poetic Slimline for Nook HD

Just purchased and received the Poetic Slimline case for the Nook HD. Here is the link: http://www.amazon.com/Poetic-SLIMLI...804667&sr=8-2&keywords=nook+hd+7"+poetic+case
Currently the case is just $6.95 with free shipping. Current as of 2/13/2013
The case has has a plastic base that clips on over the body of the Nook HD. This helps to make the fit very snug while adding very little to the depth of the device. There are cut outs for the volume rocker, headphone jack and for the power button. The bottom of the case is left mostly open for access to the micro sdcard, proprietary port and the LED light hole. There are also two holes for the speakers on the back.
The plastic case is covered with a faux leather type material. This allows for a relatively tacky area so the device will not slip out of your hand. This material also covers the front of the device protecting the screen of the Nook HD. On the inside of the front cover is a soft velvet like material that is nice and soft preventing scratches on the screen. The front cover can also be tri-folded behind the device to act as a stand for the tablet. This occurs in landscape mode allowing for a decent angle to watch movies or other videos. It does not provide any support in the portrait mode though so it will not help with reading books.
The front cover clicks in to place with the back plastic via magnets. This helps to secure the cover so that it does not flop open. It also provides for a way to turn your Nook HD on and off when opening or closing the case. This is a great feature that will actually bypass the normal lock screen so that when you finish opening the case your device is on and ready to go. However, if you enable the password lock screen then you will still need to unlock and then type in your code.
This case comes with a 3 year warranty from Poetic which is very unusual for cases but is a great feature to have.
One con I found in this device after its arrival was that there were some threads coming out from between the two material types on the front cover of the case. This were easily clipped to make things look better but it does take away from the idea of the case being of top quality. My only other concern is how well the materials will hold up while using the front cover as a stand. If used very frequently it could lead to cracking of the front cover. However, I will only be able to tell that over time and not for the day that I have had the case so far.
So far I am very impressed with the Poetic Slimline case for the Nook HD. I recommend anyone looking for a nice slim case to pick one up.
4.5 out of 5 stars.
Some more pictures in post # 4.

blazingwolf said:
The case has has a plastic base that clips on over the body of the Nook HD. This helps to make the fit very snug while adding very little to the depth of the device. There are cut outs for the volume rocker, headphone jack and for the power button. The bottom of the case is left mostly open for access to the micro sdcard, proprietary port and the LED light hole. There are also two holes for the speakers on the back.
Click to expand...
Click to collapse
Maybe some closer and illustrative photos?

datas0ft said:
Maybe some closer and illustrative photos?
Click to expand...
Click to collapse
Yep. Hope to get to them today.

Pictures added. Some in the first post and the rest here.

blazingwolf said:
Pictures added. Some in the first post and the rest here.
Click to expand...
Click to collapse
Looks really good. Thanks for the pics!

I liked the ceiling design and lighting

This looks great. Exactly what i have been looking for on HD+. this is avilable also for HD+ at $8.95.
Poetic likes to throw out introductory prices and then increase it once it gets popular, so i would order now it you want one, even if it is not available for another 1-2 weeks, for the prices may increase by then.

Tarthenal said:
Looks really good. Thanks for the pics!
Click to expand...
Click to collapse
It does fit the device well.

datas0ft said:
I liked the ceiling design and lighting
Click to expand...
Click to collapse
Better that than me in the picture.

Did i forgot mention you?!? I know why ... I just dont like any case on mob/tab and etc devices. Only acceptable are film skins which ones give a sense of the real item.

Questions: I had a Poetic portfolio case, had one dumb thing, pen holder on the back surface. Is there one on this? Also, I like to be able to stand it up in portrait mode for reading, but I think this one only stands in landscape, right?
Thanks

dbh369 said:
Questions: I had a Poetic portfolio case, had one dumb thing, pen holder on the back surface. Is there one on this? Also, I like to be able to stand it up in portrait mode for reading, but I think this one only stands in landscape, right?
Thanks
Click to expand...
Click to collapse
There is nothing on the back. So no worries there.
This case is not designed for portrait use. It might stand straight up in portrait but it won't be very stable and there is no way to change the angle.
Sent from my BNTV400 using Tapatalk HD

blazingwolf said:
There is nothing on the back. So no worries there.
This case is not designed for portrait use. It might stand straight up in portrait but it won't be very stable and there is no way to change the angle.
Sent from my BNTV400 using Tapatalk HD
Click to expand...
Click to collapse
Far and away the best commercial case I've had for a tablet flavored device. And half the cost of the nearest competitor in the
'decent case' catetory, and that one was for a 5" Samsung media player.
I get the impression that these are from a maker who also makes iPad cases and uses many of the same materials. The front has three
longitudinal strips of material - but the third is narrower than the first two. I'll compare it to a smart cover tomorrow - my memory is
that that cover has three bands of equal-breadth material on the front
The fit in the rear is good as delivered, but may start to loosen up over time, and doesn't have a cutout to match the grommet
in the corner. I may add a cutout (I have a grommet setter for fabric) and then use a shoelace or similar to fasten down the back
on that side. That could also get me a loop for a stylus, which would be useful to me. The fit across the front is a little too
long and a little too wide, which will annoy me over time or I may get used to it.
The cover activates the wake from sleep in CM10. The device sleeps itself after a minute by default, which is fine with me.
All in all, 8 out of 10.

superflysocal said:
This looks great. Exactly what i have been looking for on HD+. this is avilable also for HD+ at $8.95.
Poetic likes to throw out introductory prices and then increase it once it gets popular, so i would order now it you want one, even if it is not available for another 1-2 weeks, for the prices may increase by then.
Click to expand...
Click to collapse
I knew prices would go up. It is now $19 for hd+ and $17 for HD. Those who got in at intro price got themselves a great case (myself included). It is exactly what i have been loking for.

superflysocal said:
I knew prices would go up. It is now $19 for hd+ and $17 for HD. Those who got in at intro price got themselves a great case (myself included). It is exactly what i have been loking for.
Click to expand...
Click to collapse
Glad I got it when I did then.

As long as you're OK with black, those are still at 8.95.

roustabout said:
As long as you're OK with black, those are still at 8.95.
Click to expand...
Click to collapse
i think i got the last 8.95 one as after i ordered, the price jumped to 12.95. maybe it's back down now, haven't checked.
anyway after about a week of use, i like the case for the price but have some minor quibbles. the case is a bit creased/folded on the edges when it shipped, so it doesn't perfectly conform to the shape of the HD+. maybe over time it will smooth out.
the stand notch is not very solid and i've had it slip when i'm moving around, not sure if that's standard for case stands. also the "hand strap" is kind of hard to pull out, but i mostly use it in landscape mode so not a big deal.
like i said not a big deal especially for the price, but not a perfect case.

snowlarbear said:
the stand notch is not very solid and i've had it slip when i'm moving around, not sure if that's standard for case stands. also the "hand strap" is kind of hard to pull out, but i mostly use it in landscape mode so not a big deal.
Click to expand...
Click to collapse
I think we're talking different covers here. I thnk your cover is the "Poetic slimbook", not the "Slimline". Still good to hear you views on it!

32.4 arburnc
Thanks for the tip. Now $15 for the black HD+ one on Amazon. Still a decent price :cyclops:

Anyone has a hint how to order Poetic to a Europe country other than UK at a low price?
I can order at amazon.co.uk for 20GBP + 6GBP shipping (= 40 USD) which seems a bit high compared to 6 GBP price on UK Ebay (but from where I can't get it shipped to Slovenia).

Dot View case on sale. Black and grey under $10 USD

Quick Amazon search (not signed in, no referral/affiliate link)
I never cared about the Dot View case, but I just ordered one. $9.30 with the NC state sales tax. Can't beat that. I guess I've been a little curious about them, since there are a lot of decent cases under ten bucks, but I pretty much sprung on this one.
No idea how long the sale is for. Could be over any time, really.

Bought one. Thanks!

Match price it at best buy and got it for $9.4O

Just make sure to get the one that is shipped and sold by Amazon. I got one last week for $12 and it is 100% genuine. Not the best case I have ever used, but for $12 It's a cool case for going out, and showing off.

dragontology said:
Quick Amazon search (not signed in, no referral/affiliate link)
I never cared about the Dot View case, but I just ordered one. $9.30 with the NC state sales tax. Can't beat that. I guess I've been a little curious about them, since there are a lot of decent cases under ten bucks, but I pretty much sprung on this one.
No idea how long the sale is for. Could be over any time, really.
Click to expand...
Click to collapse
mine takes like three weeks to get here

Can anyone confirm, that the M8 fits with the Dot view Case in the Car D190?

Regarding shipping, I ordered just before or after I posted, on a Saturday. They said it would be here Monday. It was here Tuesday. So 3 days instead of 2 (I have Amazon Prime).
The case fits but not completely. The bottom part fits like a glove. There's no mistaking how it fits in. Perfect fit. However the lid (the dot view part) does not close all the way. I have nothing on my screen, not even a screen protector.
The dot view gimmick is just that. You can swipe on the case but you have to really press. You might be surprised by how much pushing you have to do. You can't change the theme. You can't customize a thing about it. You can change the temperature units in Settings → HTC Weather. This is not very intuitive and it's not stated anywhere in the manual.
The magnet thing works great. When you open it, the screen comes on. When you close it, the phone goes to sleep.
Dark grey means grey that is not light. I wouldn't call it dark, either. It's just grey. It's similar to the gun metal grey finish of the phone (if you have that option — I do, except stupid PC Verizon calls it "metal grey" since "gun" is a bad word now) but matte, not glossy. And it extends the premium feel of your phone. It feels like a premium product. It feels like a genuine HTC accessory.
It does leave dot view smudges on your screen, but these are easily wiped off with a microfiber cloth, which every phone owner should have, anyway.
You can forget about one-hand usage. You will need the other hand to hold the case open while you text.
I use a FlyGrip and I have their case. The FlyGrip would not stick to the bare back of the HTC One M8. I don't know if that's because the adhesive doesn't bond to metal. It's peeled off my naked Samsung Galaxy S3 and two of its cases cleanly, so the bond is not permanent. I might try attaching my FlyGrip to the Dot View case, but what would be the point? The FlyGrip is made to accommodate one-handed phone use. Dot View prevents it. And with a FlyGrip, you gain a kickstand, but you just can't lay your phone flat on its back.
So now I have two cases, and though I meant to take the Dot View case to work, I just didn't bother taking my phone out of the FlyGrip case. I intend to keep the Dot View case, but probably won't. I have one IRL friend with a One M8, and I might let him try it out, but he only uses his phones naked. He doesn't like cases at all and thinks they're a waste of time that take away from the engineering of the phone — especially a nice one like ours. And I don't disagree, but I like the FlyGrip's utility. It's useful to me. It prevents drops. But it isn't cheap.

Bought a new one because it's cheaper, forgot it doesn't work well with my glass screen protector. =\
dragontology said:
The dot view gimmick is just that. You can swipe on the case but you have to really press. You might be surprised by how much pushing you have to do. You can't change the theme. You can't customize a thing about it.
Click to expand...
Click to collapse
Theme stuff is in the HTC Dot View app. If not on phone, then it's on Google Play.
Also if you're rooted, you can do a lot more, theme-wise.