Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.
jvillejoe said:
Ok so this nook was bought brand new in December 2010 For my mother In-law. She hasn't used it much. So I asked if I could put Android on it? She said sure cause she hasn't used it at all. As a matter of fact the NC was totally dead when she gave it to me. So I get back to my house and put it on the stock charger. I let it charge for 2 hours. I picked it up and turn it on and all I see is this message: Battery too low to power ON. I did a search and turned up similar problems but the nc where all rooted. I'm wondering if other people have had this same problem? And what they did to solve this as it is more then likely an easy fix. A. Take it back to the store and exchange it. Or. B. Send it off for repairs. C. Someone On XDA has the answer.
Also I've done some trouble shooting like trying to reset it. Also I've used 3 Other chargers and its still not charging or turning on.
Edit: It turns on it just stays at the screen with a red battery displaying the message in the title. Also after charging for a while the screen kind of lites up like its going to turn on but only goes black after that and then comes back to the same red battery screen.
Click to expand...
Click to collapse
what are you charging from? are you using the stock nook cable and plug?
Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.
That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.
altimax98 said:
That stinks. You may have to contact B&N for it. If your using the stock and other chargers then it must be a battery failure.
Click to expand...
Click to collapse
Yeah seems to me thats what it must be I'll post back what I find out.
When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.
RobertsDF said:
When that message is displayed, try holding the power button for 30+ seconds and then turning it back on.
That has worked for me the couple of times it seemed stuck on that screen.
Click to expand...
Click to collapse
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?
jvillejoe said:
Yes. And charging it from the wall outlet. Did that with the stock charger. my charger from my HD2 and also tried with the charger from my vibrant. All have the same affect. It has the red battery and the messege below and it also has been a total of 6 hours of charging 2 hours each with the all the chargers.
Click to expand...
Click to collapse
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App
Non-Standard chargers...
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.
danger-rat said:
If you're using other chargers, it's possible that you've damages the usb port. The NC uses a non standard usb port, which has two stages. The first stage is standard 5 pin uusb communication, the second stage is non-standard 12 pin charging...
Sent from my Nexus One using XDA Premium App
Click to expand...
Click to collapse
I never used another charger besides the stock charger that came with the NC. Up until this happened all that was ever used was the stock cable for charging. I only used another charging cable once I ran into these problems cause I figured the cable was damaged. Its happened to me before with other devices. But the same results happen with every cord I use. When I plug it in it lights up and shows the red battery screen. So that tells me that the cord or USB port couldn't be the problem. Cause its clearly getting power its just not charging.
Fattychance said:
As far as I can tell it works fine with any microusb cord.
Their charger cables break...(bend and break) very easy. I have gone through 2.
The upside is that their charger provides power far faster than the normal microusb cords.
At this point...I'm charging mine almost exclusively from my stock evo cord.
If you don't turn off the screen when charging...it may not have enough power coming in to actually build a charge without their cable.
Click to expand...
Click to collapse
When charging I can not turn the screen off it's stuck on the screen with a red battery.
jvillejoe said:
Nope its not working at all. I was wondering is there an SD card that come with the NC bought brand new from B & N?
Click to expand...
Click to collapse
No. They sell it without one...the 8GB internal storage is enough for looooottts of books. The microsd was just a nice + for people with lots and lots of music.
I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.
bstock said:
I had this issue as well, but I found a fix!
No matter what I did or how long I let it charge, it would always have that red low battery icon.
What I ended up doing to fix it was opening up the back of the unit and disconnecting the battery cable from the unit. I then plugged it directly into the wall without the battery connected to see if it would boot, though I don't know if that was necessary, I don't even remember if it booted that way or not.. I think it did not.
Anyway I unplugged the power cable again, reconnected the battery, then plugged in the power cable and tried to boot and it booted up perfectly after that. The battery icon indicated 13% charge, but it quickly charged back up just fine.
FYI I left the unit in the car overnight right before this happened, and it was pretty chilly that night, 10-20 degreed Fahrenheit. I suspect that caused the issue for some reason, so I've been sure not to do so since.
P.S. I had to do a fair amount of googling around before I found good instructions on taking apart the NC. I think I had to take off the 2 screws under the SD card slot and use a butter knife to just pry the back off. It's just held in with clips and you can't tell it was opened except for the little stickers over the screw holes.
Click to expand...
Click to collapse
Thanks for the feed back. I'm wondering by un-pluging the battery from the nook if it resets it. Kind of like if a phone freezes or if your computer freezes and you pull the battery. Seems like a plan. Not sure if this is what I'll do as I'm sure its still under warranty. If it comes back and its not covered or B & N wont replace it I guess thats my only hope.
im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?
CLMT said:
im having the same problem as well it was off for a while and now its at the red batter screen. i guess ill try and take it apart?
Click to expand...
Click to collapse
If your not worried about voiding the warranty then sure I guess its worth a shot.
So I got it fixed right. All it was was a faulty cable lol!
jvillejoe said:
So I got it fixed right. All it was was a faulty cable lol!
Click to expand...
Click to collapse
I had this problem too, but I'm not sure "faulty" is the right word for the cable.
My friend borrowed my nook and returned it with a dead battery (Thanks asshole). So I plugged it into my computer at work and just got the always-on low battery message. After 45 minutes I took it to my car so I wouldn't forget it. I plugged it into my USB charger in the car using a different cable. Two hours later, same state.
When I got home I pugged it into the Nook wall charger with yet another cable (not the nook's original) and got the same thing. I searched here to see if I could figure out what was going on and decided to try the original cable with the wall plug. literally two seconds after plugging it in it started booting into Froyo.
I'm sure I didn't have four "faulty" cables. I think those that are saying you should be using the original are correct. The others worked fine when the battery wasn't empty, but mine only responded to the original once it got to the point of the unending low-battery message.
Original charger / cable required with totally empty battery
Same here. With battery completely empty and non standard cable,stuck at red battery sign forever. With orginal cable, boots fine and charges.
solution I found
Have CM7 installed on SDCard, got the battery icon, even with the unit plugged into the charger with oem equipment. Held the power button 'til the unit turned off completely, removed the sdcard, rebooted. Nook booted into stock fine, turned off, re-inserted sdcard and rebooted. All is well.
Related
hi, new member here.
bought my tilt on 10/4/07. has been flawless since that time.
used the nav quite a bit during a road trip, used a cig lighter usb charger.
got home and my battery was at roughly 40%.
put it on the charger at night went to sleep. in morning disconnected it at 8 am. shortly after i arrived at work i got the critical battery low chime. checked and it had like 7% battery life.
figured i didnt plug it in right, or it got knocked loose some how and didnt get charged.
put it in flight mode to minimize battery usage. left work at 2 30 pm (4% battery life) and put it on the car charger. got home and put it on the HTC supplied wall charger. light turned amber, so i assumed it was charging.
checked an hour later and turned phone on, it said 0%, and immediately died. left it on the charger for a few hours and the light was still amber, turned it back on and again 0% and phone immediately died and did a soft reset on its own. i turned the phone off and left it on the ac charger, took out the sim card and put it in an old blackberry to use while the battery was charging.
its been on the ac wall charger for the last several hours, i checked and the phone is totally dead, cannot turn it on, and the LED at the top is now RED.
what is the problem here? why wont this thing charge?
thanks in advance, i have alot of critical info on this device and any help would be greatly appreciated.
i cannot hard reset because i cannot turn the flippign thing on....
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
I'd try a different charger first. If that makes no difference then a different battery. If that still does not make any difference then time to exchange it.
Lidberg said:
Does it charge when you connect it to your computer? If it does, then your charger is toast. If not, then it's probably the phone itself.
Click to expand...
Click to collapse
connected to either the computer or the wall charger, the LED thats normally amber when charging, and green when charged, remains red.
I had something very similar happen to my wizard.
And as weird as it sounds, the only fix was to charge the battery in a friends wizard on his charger. I'd check the battery if possible.
Could be the battery. Know any place or anyone that will let you try a charged battery? If not, you might have to go in to an AT&T store.
i think i got it working. did some reading/browsing...
took a usb wire and cut the mini usb head off. dissected it and found the the red and black charging wires. took out the battery and held the leads to teh battery while the other end was plugged into a USB/AC adapter wall charger from a old blackberry. after manually charging the battery for several minutes, i put the battery back in the phone and the phone started up. now it seems to be charging off the wall charger and the led is now amber from red.
thanks for all your help/suggestions.
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
tiltyoself said:
well it worked briefly. the amber light has gone back to red and it seems that the battery is not charging.
dont know what happened to my perfectly functioning phone.
Click to expand...
Click to collapse
Repeat this proceedure but this time do not turn the phone on, just plug it in to the wall charger once you have zapped the battery again.
Turning your phone on probably just caused the already recovering battery to die whiles it is trying to take on a charge.
It is mentioned quite a lot on the boards that Li-Ion Batteries do not like being over disscharged and there is usually a little protection circuit in the battery to provent complete disscharging although this circuit may be on board the phone. Completely disscharging a Li-Ion cell will kill it stone dead and it will need replacing.
When you took the battery out and so called jump started it with your flying leads, this possibly reset the little protection circuit in the battery so it can now take on a charge. I feel that once you turned on the phone, this was to much for the already depleted cell to take and possibly re-tripped its inbuilt circuit.
If you do manage to recover you cell, in future it is good practice not to let the battery go below about 25%. Li-ion cells are generally happy being top off regularly.
I hope this helps buddy
Do let us know!
Cheers
C.
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
That Sucks! I hope they'll give you a new battery.
tiltyoself said:
thanks, that was very helpful.
ive tried defibrillating this battery out of the dead several more times to no avail.
ill try it one more time when i get home from work, if its a no go i will go to teh att core store. the phone is 6 weeks old, dont know what they can do for me if the battery is toast...
Click to expand...
Click to collapse
I had exactly the same problem with my battery. It came on though after a day. Although the battery life after this happened went down to 10hrs max on standby. I sent the phone back and got a new one and now all is fine.
This is a problem that affects almost all makes of phone. There are three (main) causes of the problem:
1.
The battery charge drops too low to allow the charging circuit to recognise a battery is even in place (red no charge light stays lit)
possible solution:
http://forum.xda-developers.com/show...22&postcount=6
(in the end very similar in the end to the USB wire used in post above)
2.
A faulty battery (but if you can charge it using a cut usb cable or using a couple of AA batteries this may not be a faulty battery.
3.
A faulty charger OR a charger not delivering 5v at 1000mA as the OEM one does. Many chargers that are used for other phones or generic chargers only deliver 500mA. This is not enough when your battery drops very low. (these chargers are OK for occasional use but I do not advise using them regularly particularly if the no-charge syndrome has shown itself)
4.
A faulty USB connection on the phone. I have now seen a couple of reports where the fine wire connections in the phones USB port have become bent out of place.
Number 4 above is at least possible for the OP as it seems the battery will charge using a cut USB cable but not when either the PC USB cable or mains charger is connected. A USB port on the phone with a a bent internal contact would explain what's happening.
A previous poster was able with a needle or similar to bend the contact back into place.
Mike
i had the same problem with my phone.
put it in the charger overnight and woke up in the morning and couldnt turn on the phone with blinking red light. I don't know if my battery was over-drained though. I went to AT&T and was playing around with their charger and new battery and somehow the so-called dead battery started working again. They changed the SIM card on my phone there and then i haven't been able to use the phone since. I've changed the network to GSM instead of Auto setting under Phone Options which allows us to make calls; but now I can't connect to 3G network.
Charging thru mini usb
My phone started to exhibit similar problems...plugged in but no charging of the battery. I finally realized that my mini usb connection on the phone has been compromised (bent, distorted=not functioning properly) Now I have to prop the mini usb connection up at a slight angle to engage the charge. I think the plastic/metallic connector on the phone is somewhat fragile ...I had similar issues with my hermes.
called customer support.
they are sending me a new phone and battery.
how do i know its not a refurbished one? any clues?
before u send out your defect phone, have u check if your phone's mini-USB connector has bent or misaligned pins?
yeah all the connectors visually are fine.
What the heck is going on?
I'm pretty sure this has nothing to do with the ROM, because it did this with the factory ROM, Manila 2d and now WM6.5.
I turned the phone off, unplugged it, removed the battery. I put the battery back in, replace the cover and press the power button. Nothing happens. I plug the phone back in to the wall charger and put power, it turns on....for about 3 seconds then reboots and it would seem that it will do this for as long as I let it go. If I unplug the phone while this is going on, it will die.
The last time this happened, it took it about a day and a half to sort itself out. It almost seems like its a battery issue.
Any thoughts or ideas?
UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.
zz_3.14_zz said:
UPDATE!
I took the sim card out of the phone for a few seconds and the phone seems to be working now.... But its been up and running for about 20 minute now with no sings of acting up.
Click to expand...
Click to collapse
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks
kaiser won't turn on
LuXx said:
mine started doing that today. went to use the camera and it reset then when it came back on it said battery was drained(this happened around 1pm and i always get a full day out of battery) and reset. have it on a charge right now but will not turn on. took out battery and put it back in with no luck. i will try to fully charge battery and take out sim. if all else fails i will try to hard reset. thanks
Click to expand...
Click to collapse
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?
I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
LuXx said:
tried to charge the pda all night the light stayed orange and never turned green indicating full charge. tried hard reset and when it goes in to prepare rom it shuts off like dead battery. when i plug in the pda to charge battery and then turn on the phone it freezes on splash screen. if i turn on phone then plug in to charge it acts like i havn't pluged in charger. is it the pda or battery?
Click to expand...
Click to collapse
Teej53214 said:
I am not 100% sure on this, but to me it sounds like the battery.. and that is a MUICH cheaper option to test out... unfortunatly you ahveto wait for shippng typicalyl unless you have a friend who has the same phone.. I got 2 backups and a stand alone charger now... The other option could be your USB port... I have not heard this specific problem with them.... but I am a PC tech and have seen very simmilar problems with laptops... Usually the first think to for is the power port... Just like out phone, if the device is not on a flat surface and such when it is plugging it, it tweaks the port and it eventualyl breaks... on laptops it is not uncommon that when plugged in, the LEF wil light up saying it is getting power to charge, but it enver charges the battery, and even sometimes can;t power up the full system.. .It sort of sounds like this is what you phone is doing as well.. .If that is the problem the stand alone charger would work (my son broke off his usb all together and now syncs via bluetooth and jsut changes batteries.. he has 3 himself as well) If you search online, you can usualyl find a kti with a battery or 2 and a charger/dockign station for under $20US total. Good luck!
Click to expand...
Click to collapse
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.
oh no
LuXx said:
Thank you for your reply! I have just ordered a new battery and will post my findings when it comes. Thanks again.
Click to expand...
Click to collapse
no luck with the new battery. still doing the same thing. please someone help me! Thanks
LuXx said:
no luck with the new battery. still doing the same thing. please someone help me! Thanks
Click to expand...
Click to collapse
tried bootloader and installed official att rom and never shut off. when it was finished with install same issues appeared. help
For anyone facing this issue I would not recommend wasting money on a new battery as this issue has been around with few users since the Kaiser "Tilt" first came out and I've never seen ANY reports that a new battery fixes this. People have bought new batteries, fully charged their battery from a docking station, tried their friends fully charged battery all with the same result. I had this power down issue a Looong time ago my first week in with the Kaiser and managed a fix and am using the same battery now. Although it seems the battery is not being fully charged it's important to leave it charging until you'd assume it's fully charged and get into bootloader mode and flash an official htc Tytn 2 rom. It should flash completely, and the fact that it does not die immediately as on normal boot indicates it is not the battery but the rom. It did take me the whole afternoon of Flashing, recharging and repeating before it finally kicked in. Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.
kaalgoosy said:
Also, from reading older posts, it seems most if not all users like myself fixed this by flashing the older official htc wm 6.0; worth a shot at least.
Click to expand...
Click to collapse
Yup, that is what I had to today (I hard reset, actually), with barely enough battery life to do this.
Then the bloody unit came up and was charging - amazing, really!
(Was using the official HTC 6.1 upgraded WindowsMobile OS)
here is my 2 cents....
I owned five Tilts, replaced four of them with warranty issues ... so i have faced this dilemma on at least two of them.
First see if the USB tongue is loose. To do this try to gently tap it with the stylus. If the tongue inside the USB port is loose then you will be facing rebooting and other issues and troubles in the future. The USB tongue gets used and jerked every time you connect your device to your PC or wired headset. If you are still under warranty and the USB connector tongue is loose I recommend returning the phone ( if you still can) and getting a replacement. There is no easy fix for a loose USB connection tongue as i have taken one apart and it is very difficult to repair or replace and very easy to mess it up further.
So, my advice to all Kaiser owners... be careful when plugging and unplugging your phones through the USB. Do it gently as the connectors are very fragile.
For those that have the above issues, I recommend using a separate battery charger tray, avoid plugging the USB as much as you can, and if you must, then administer extra care. The rebooting will stop if you plug the USB cable to the device and move it up and down a hair then holding steady. And most likely you will not get a full charge or even a partial charge. The biggest culprit to this problem is car chargers, and second, is inserting the stylus by mistake (when it is dark and hard to see) in the USB port instead of the Reset hole by accident.
My touchpad will charge or atleast it says it will charge but it will not power up. I have tried holding the power button with the home button and it flashed the battery dead sign(which it had been charging for over a day). The sign only appeared that one time and i can not recreate it. Any ideas? It does not have any special roms on it, it is all stock. And I have sent it into HP and they sent it back in 'working' condition but it wasnt fixed at all.
Fill free to ask away about what i have or havent done or need to do. HELP!! lol, please
mm...well now it is occasionally telling me that im not using the right power source when I'm using the charger that came with it. And when it did tell me that the back light would go on and off and it would switch to the dead battery sign. It was doing it in a pattern too (dead battery-> back light on/wrong charger -> back light off/wrong charger -> repeat). The USB connection seems fine in there because i was wiggling it around when all that was happening and it didn't seem to make a difference from when i was wiggling and when I wasn't.
And to be honest, I do not know why the dead battery would be showing. It claims it has been charging for days. I am gonna let it recharge again I suppose to see if it makes a difference.
Might be a bad cord.
I have had 5 cords from them fail so far.
I will try another cord but the cord and plug seem to charge my other devices fine and I believe I have used other cords to charge it before. I shall report back in tomorrow.
Well another cord did work but it doesnt show that it is charging anymore. I guess that isnt a big deal but is there a way to fix that?
Hey,
My Galaxy Note recently decided to stop charging. Whenever i plug the charger in it shows the "first white charging logo", the one you see before the green battery being filled up - after about half a sec the logo goes away only to return 5 seconds later.
I've tried to blow into the socket, and i've looked into it with a light to make sure nothing seems off, and everything looks perfectly fine. So far i have tried with 2 cables, one third party and the original one, no difference there. Both these cables work well with my Galaxy S2. Therefore i am willing to say for certain the problem is in the actual USB port, which i find weird because I've never mishandled it in any way.
Another thing is the battery gets warm after cycling like this for a few minutes. I tried to take the SGSII-battery and fire the Note up, by holding the battery in place according to the connectors, it fires up perfectly.
Do any of you have any experience with these kinds of issues?
I am currently running Paranoid Android Hybrid-ROM, I guess my only real option here would be to borrow a friends charged battery to flash back into a stock ROM and plead ignorance with the warranty claim. The phone is no older than 4 months. Does anyone know how thorough they are when placing an RMA on a phone?
Thanks, any input greatly appreciated.
AndrewXXV said:
Hey,
My Galaxy Note recently decided to stop charging. Whenever i plug the charger in it shows the "first white charging logo", the one you see before the green battery being filled up - after about half a sec the logo goes away only to return 5 seconds later.
I've tried to blow into the socket, and i've looked into it with a light to make sure nothing seems off, and everything looks perfectly fine. So far i have tried with 2 cables, one third party and the original one, no difference there. Both these cables work well with my Galaxy S2. Therefore i am willing to say for certain the problem is in the actual USB port, which i find weird because I've never mishandled it in any way.
Another thing is the battery gets warm after cycling like this for a few minutes. I tried to take the SGSII-battery and fire the Note up, by holding the battery in place according to the connectors, it fires up perfectly.
Do any of you have any experience with these kinds of issues?
I am currently running Paranoid Android Hybrid-ROM, I guess my only real option here would be to borrow a friends charged battery to flash back into a stock ROM and plead ignorance with the warranty claim. The phone is no older than 4 months. Does anyone know how thorough they are when placing an RMA on a phone?
Thanks, any input greatly appreciated.
Click to expand...
Click to collapse
Did you try to wipe your battery stat in recovery mode.
jonpaslim said:
Did you try to wipe your battery stat in recovery mode.
Click to expand...
Click to collapse
No I did not infact, I'll give that a go and see if it helps. The problem is the SGSII battery doesnt fit completely, so i need to hold it by force at the pins, not sure ill pull that off while entering the recovery menu, but i'll try and see!
Edit: Tried it and it did not help unfortunately. At least i can use the SGSII-battery to safely get into menus etc.
Hell, might even be a broken battery?
I interpret the problem as "charging starts but battery refuses.." since the 1st logo keeps flashing. I read elsewhere that it might be a moisture-related problem aswell.
This I do not disregard completely because the phone has been lying near an open window, even though it's summer it cannot be fully ignored.
Either way, in the other thread they suggest putting the phone in rice (which soaks up moisture) for a few days to see if it helps. I even put one of those silica-anti-moisture-bags in there with the rice. Fingers crossed.
If nothing helps I think I'll just borrow a mates charged battery to flash back into stock, get rid of evidence etc - and place it in RMA.
Why don't you try a new Note battery or from another Note. If it fired up with a Gs2 battery perfectly then it must be your battery!
Sent from my GT-N7000 using xda premium
Leave your phone without any battery for about 30 min., this helped me when my phone was refusing to charge somtimes and was giving me discharging while on the charger, after i pulled the battwry for about 30-45 min it is perfectly charging now, btw iam on paranoid also and my phone doesnt charge when it is turned off, have to turn it on frist to charge
Sent from my GT-N7000 using xda premium
easy fix
hey i had a similar problem...was a bit frightened at first....ok connect your phone to your computer, if the computer recognizes then you cables and USB port are just fine.....this means that your phone has some firmware issues....ok here's the simple fix......allow your battery to die completely, then remove the battery from the phone for about 30 minutes......plug in the charger with the battery still out of the phone for 30seconds....now unplug your charger, reinstall your battery into the device and connect your charger again.....this may also work if your device refuses to power on....
I have a rooted Nook HD with cm11 using nightlies (I forget which one. I think it's 2/1/2014). So, I lost my Nook HD wall adapter and started using a different one. This one had the exact same output specs, except it had .7A instead of 1A. Then it started to not acknowledge that it was plugged in and charging. I usually leave it plugged in overnight, so I found an old Nook HD adapter (I had replaced it a few times) with loose hinges on the two prongs. It was at 95% at night, then at 12% the next morning. Later, I was out somewhere and it said the battery was at 1%. I didn't really think much of this because the green (100% charged) charger light was on whenever I plugged it in, and it has said it was at 1% before, and when I plugged it in it usually fixed it and it would display the correct battery percentage. Well, this time it didn't. I guess I had forgot about the incident the last night. I assumed it was at 100% and it would just run down normally until it died even though is said 1%, but then it died quickly. I plugged it in where I was, but I had to go so all I saw a green light on the charging light, but then I had to unplug it. When I plugged it in later at the house it showed green, orange, then turned off. I left it overnight, and plugged it in this morning and it still did the same thing. I left it that way. I just tried plugging it into the computer because I've heard that some devices use different hardware to charge via just USB, but no luck. I plugged it back into the wall. What should I do?
P.S. Before root, and when I first got it (used), I tried charging it when it was off, and it didn't charge. I never tried again. Is this normal, and could it have somehow contributed to the issue?
OK, I know that it had said I posted the above at 4:00pm. I didn't. Can someone please respond?
NMGxda said:
OK, I know that it had said I posted the above at 4:00pm. I didn't. Can someone please respond?
Click to expand...
Click to collapse
Not sure what to think about this and guess no one else as well.
I assume with providing less power the electronics can compensate. Obviously, brown outs (for instance) are bad over a period of time but not as quickly as this.
More power is probably much worse.
Just don't think the charger broke the device. If you find the bn wall plug and it still didn't charge then it physically broke probably coincidence or not.
Addition: Assuming you use a smart phone why not use that wall plug? That's all I use. The bn plug is in the box.
Got a new cord and it works! It was on sale for 50% off as well. Guess I broke the cord by usinng the wrong adapter. Anyway the specs are actually something like 5.1V 2A, and the one I used was 5V .7A. Ouch. Thanks anyways!