Related
Hi ,
My girlfriend has had her galaxy s for about 4 months i recently flashed darkys rom onto it, with no problems (excellent rom btw), but now the phone has started doing menu and back on its own randomly making it impossible to do anything on it for longer than a few minutes , its like the soft keys are being pressed (but they arent of course).
I've had a google and came to the conclusion its a hardware fault and not software (ive tried factory reset / re-flashing roms/ kernels) but now i have the problem i cant send the phone back to tmobile with a custom firmware so is there anywhere i can download tmobile firmware and stock kernel to make it like when she got it ?
Any help or advice would be greatly appreciated.
In the General chat, there is a link to all the stock roms. Select the one you want and install that one. I am on t mobile in the uk and my code is TMU so that will most likely be fine for you.
By the way - Its exactly what I did last month and they fixed it fine for me with no questions...
CtC
hi thanks for the quick response , ive already installed a stock firmware but when the phone boots up it doesnt do the tmobile logo now, plus the firmware i have installed, i'm not sure if thats ever been available on tmobile , which firmware did you send your phone back to them with if you dont mind me asking ?
Hi,
I used the JP1 stock rom here. I remember now that once I installed the stock one I used the Kies registry hack to put the latest t-mobile firmware on there. Then it was branded T-Mobile again. The only problem is that now kies has been updated the Registry hack may not work.
If I were to send you a nandroid backup of my original T-Mobile rom (I did that when I got a new one!) Would that help?
CtC
I would blame the rom before the hardware and want a wipe to a very clean phone and install a stock rom .
You cannot download TMobile firmware you need somebody to give it to you unless you backed up your original firmware .
The only way to get TMobiles firmware would be to downgrade your phone to stock Eclair then use Kies to update as normal to Froyo branded TMobile or if that failed use the registry patch .
Fix on a non stock rom is going to depend on the guy that picks the phone up and the problem .
jje
"If I were to send you a nandroid backup of my original T-Mobile rom (I did that when I got a new one!) Would that help? "
It would be brilliant if you could do that, how can you send it though ?
@ jjegan i have completely wiped the phone, changed the firmware to 2.1update1 same problem still exists with the soft keys randomly pressing themselves thanks anyway .
can any one give me some advice about making this phone look as stock uk tmobile as possible before i send it back ?
Hi Android ppl!
I have Galaxy S with FROYO.XWJPH and camera FW SESBDI07.
When i'm recording movies in places with artificial light or darky places (stages, dance studios so places when i need it mostly and often) autofocus gets crazy.
How can i get back to previous version of camera firmware, without autofocus?
i don't think its possible IMHO.
I have flashed another firmware through odin and even flashed the bootloader. The camera firmware remained the same.
Can you check what version of camera firmware do You have?
Maybe older camera firmware was loaded to phone with flash but Odin didn't updated firmware in camera?
I't could be chance form me. I will even risk updating via camera menu avalible from service codes to turn AF off...
LordOfApesPL said:
Can you check what version of camera firmware do You have?
Maybe older camera firmware was loaded to phone with flash but Odin didn't updated firmware in camera?
I't could be chance form me. I will even risk updating via camera menu avalible from service codes to turn AF off...
Click to expand...
Click to collapse
I so！*#*#34971539#*#* update camera firmware adn galaxy s error.
hi guys pls help me i tried surf the net with no help
i have a Samsung galaxy s i9000 i rooted to 2.3.3 but
today i flash my phone back to singtel firmware JG4 and i plug my device to kie
it came out this error hw do i change my CSC back to singtel?
Uploaded with ImageShack.us
pls help thanks
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
diiiooon1989 said:
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
Click to expand...
Click to collapse
hi thanks for the reply but is this work for all country phone? cus mine is singapore
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
diiiooon1989 said:
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
Click to expand...
Click to collapse
hi bro i tried finding but with no luk
do u mind guide me with this
how to get xwjs3 with the boot loaders.>??
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
diiiooon1989 said:
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
Click to expand...
Click to collapse
hi bro thanks for the guide
but nw i have this issues
Uploaded with ImageShack.us
the reason i wanna flash back cus my phome home button not response-ing
): and my camera Len crack
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
JJEgan said:
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
hi thanks for the guide but nw my phone hang at Galaxy S
GT-i9000
Samsung
logo Screen >.< and plus my Home button not working anymore
even i try up + power + home button to recovery mode
or down+ power + home button mode
also not working >.>"
myrddral said:
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
Click to expand...
Click to collapse
hi thanks for the guide but i think my phone is dead >.>
Possible fix flash stock 2.1 rom with repartition checked and pit 512 not a 2.3.3 rom
Via Odin .
jje
Sunday i send my phone to causeway point to repair my camera lens and button.. today they send my phone to my house Thumb up... i notice they change all the button, lens and the whole back case and i notice my firmware is i9000DXJPB is it the latest firmware?
Hello guys have a question for you.
I installed Kies on my PC a few days ago. I connect my Note and everything seems fine, I can browse the device, see my memory usage, see the firmware version that is installed, etc, but every time I click on the firmware upgrade and initialization option I get a message box saying: "GT-N7000" does not support initialization.
what does that mean? That I can't use kies to update my device?
I know my device is rooted but I guess I still should be able to use kies to update my device, right? am I mistaken?
I have the same problem.
I also see the same message when I hook my one up
Sent from my GT-N7000 using xda premium
im on the stock unrooted german ICS, when i connect to Kies it says that "your device does not support software upgrading via kies!!!" anyone know whats up with that!?
Erase Kies that you have right now, go to Samsung.de (german site of Samsung) and install their latest version of Kies. Open Kies, run device updates in Kies and reboot your phone and THEN connect phone to the computer via USB cable. I had the same message and this solved my issues.
carlitos66 said:
Erase Kies that you have right now, go to Samsung.de (german site of Samsung) and install their latest version of Kies. Open Kies, run device updates in Kies and reboot your phone and THEN connect phone to the computer via USB cable. I had the same message and this solved my issues.
Click to expand...
Click to collapse
Perhaps I'm blind, but could you point me to which options do I have to run?
Sent from my GT-N7000 using XDA
cussyandrew said:
im on the stock unrooted german ICS, when i connect to Kies it says that "your device does not support software upgrading via kies!!!" anyone know whats up with that!?
Click to expand...
Click to collapse
Had the same problem was on indian (inu) version of gb and upgraded german ics.... had this message also.
I changed my csc code to dbt and it seems to have fixed that.
this is what i did
in dialler type
*#06#
this gives imei number note it down
then
*#272*your imei from above#
select dbt and hit start.... does a factory reset though so be warned
also i am a noob so cant garantee that this is safe, this worked for me now when i connect to kies i get the this is the current firmware message, however i dont know if its safe, my phone has never been rooted also.
just need to fix the charging paused voltage to high message without having to connect a usb stick conector and removing it now.
20inchtofreedom said:
Had the same problem was on indian (inu) version of gb and upgraded german ics.... had this message also.
I changed my csc code to dbt and it seems to have fixed that.
this is what i did
in dialler type
*#06#
this gives imei number note it down
then
*#272*your imei from above#
select dbt and hit start.... does a factory reset though so be warned
also i am a noob so cant garantee that this is safe, this worked for me now when i connect to kies i get the this is the current firmware message, however i dont know if its safe, my phone has never been rooted also.
just need to fix the charging paused voltage to high message without having to connect a usb stick conector and removing it now.
Click to expand...
Click to collapse
Tried your method, but i got only 3 options and didn't know what to chose.
VNO
TTT - in use
TDR
Sent from my GT-N7000 using XDA
rupalazzi said:
Tried your method, but i got only 3 options and didn't know what to chose.
VNO
TTT - in use
TDR
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
Anyone can confirm if changing this parameter is safe?
I had many more options than that but i chose the option that matched the area the rom was from.... was on a inu rom to start changed to german release (csc is dbt) so i changed it to match.... now ive flashed the lpf rom instead and have the same prob again.....
Hi
Can anyone speak easy to understand solution for a noob like me.
I have stock ICS, Indian.
how do you know if you have Indian or german update .. Last time the samsung service center installed German update on my note
please, did you even try to search?
http://forum.xda-developers.com/showthread.php?t=1806694
if any of you superbrick your phone on stock kernel and unrooted by changing csc which triggers wipe/factory reset dont do anything fancy and contact entropy. you will know youre superbricked if update via pc Odin sticks at factoryfs for forever. (or longer then 30 min)
Sent from my GT-N7000 using Tapatalk 2
Today i got my phone back after a hardbrick, with a replaced motherboard, so extremely happy about that.
But the downside is, when i connect my note to my computer and open kies it says this:
Your Device does not support software upgrading via Kies.
Current firmware version: N7000XXLA6/N7000XENLA1/N7000XXLA4/N7000XXLA6 (XXX)
Could this be caused by the motherboard replacement i've recently got? In the way that parts of software does not match anymore?
second: Is there a non root fix for this?? No??!! any other fix?
Greetings Sam
Edit: before the hardbrick/motherboard swap, Kies searched/found updates
Your Device does not support software upgrading via Kies.
I have very same issue. Logic board replaced and since that Kies says no support for my device.
Current firmware version: PDA:LA6 / PHONE:LA4 / CSC:LA1 (XXX)
I would like to go into ICS but I am worried to do any firmware changes, in case they will not accept any other replacements if any issues. Any advice?
Thanks
I think its down to your computer already reconising the device as it was before try uninstalling kias and reinstall
I've did a connection troubleshoot problem checker thing. But that didn't help.. I'll try reinstalling the whole program+drivers maybe that's it?
i have same problem too.。 i already reinstall my pc windows 7. but it doesnt solve the problem.. i also unrootred my sgn ..but still the same
Sent from my GT-N7000 using XDA
As i expected, reinstalling didn't do the trick. So any other options?
E-mailed samsung yesterday but that will probarbly cost a week before i get an answer back that will not help.
dr ketan help me ..it seems that the csc not matching see my posting here
http://forum.xda-developers.com/showpost.php?p=26502080&postcount=2526
http://forum.xda-developers.com/showpost.php?p=26502550&postcount=2527
hornus said:
I have very same issue. Logic board replaced and since that Kies says no support for my device.
Current firmware version: PDA:LA6 / PHONE:LA4 / CSC:LA1 (XXX)
I would like to go into ICS but I am worried to do any firmware changes, in case they will not accept any other replacements if any issues. Any advice?
Thanks
Click to expand...
Click to collapse
The pcode is not activated from service center or corrupted had the same issue send it backvthey didn't fix it and got a replacement from the shop bought it. It is a problem caused/not solved from service center. Live with it or send it back.
Sent from my GT-N7000 using Tapatalk 2
Braxos said:
The pcode is not activated from service center or corrupted had the same issue send it backvthey didn't fix it and got a replacement from the shop bought it. It is a problem caused/not solved from service center. Live with it or send it back.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
than my question is, will i receive OTA updates? cause i can live without Kies, but idd like to recieve updates.
O yeah got an email back from Samsung support, they explained me how to instal kies.. very very helpful:s
samzoethout said:
Today i got my phone back after a hardbrick, with a replaced motherboard, so extremely happy about that.
But the downside is, when i connect my note to my computer and open kies it says this:
Your Device does not support software upgrading via Kies.
Current firmware version: N7000XXLA6/N7000XENLA1/N7000XXLA4/N7000XXLA6 (XXX)
Could this be caused by the motherboard replacement i've recently got? In the way that parts of software does not match anymore?
second: Is there a non root fix for this?? No??!! any other fix?
Greetings Sam
Edit: before the hardbrick/motherboard swap, Kies searched/found updates
Click to expand...
Click to collapse
Do This; i Got this Here On This Forum.
Change your CSC Code to German and upgrade via KIES; this will also factory reset your phone.
so on phone :
*#272*IMEI# then change the CSC to DBT.
Phone will reset.
Change language to English (bottom right icon)
follow prompts to setup
Connect to KIES and the phone will update to ICS.
When your finished, you change the CSC code back to whatever you had before
Aluyi said:
Do This; i Got this Here On This Forum.
Change your CSC Code to German and upgrade via KIES; this will also factory reset your phone.
so on phone :
*#272*IMEI# then change the CSC to DBT.
Phone will reset.
Change language to English (bottom right icon)
follow prompts to setup
Connect to KIES and the phone will update to ICS.
When your finished, you change the CSC code back to whatever you had before
Click to expand...
Click to collapse
thanks, allready tried that.. I have one with only XEN, nothing to choose further..
What i just did, flashed back to the first ROM available for my phone and country, still not working with Kies... But OTA updates did work, so if a new update is available i will receive it OTA i guess
Happy enough about that, dont really have the need to be rooted or have a custom ROM after the first attempt went really wrong(reason boardswap) but i like to have a fully working phone, also when connecting it to the Computer
I have tried do this too, but it will not let me change current CSC XEU. Don't know why. I have also tried copy and paste but no luck (
Once more! Flash change CSC change imei pray to God wipe rewipe ALL OF THEMA WILL NOT REPAIR IT send it to service center if it comes so back try to get a replacement/refund.
Sent from my GT-N7000 using Tapatalk 2
new kies update fixed it?
I had this exact same problem. But now looks like it's fixed. All of a sudden my Kies has started to recognize the fimware and tells me that the current version is the latest version!
So the new update of Kies fixed it?
My kies version is 2.3.2.12054_19
sudarshanpbhat said:
I had this exact same problem. But now looks like it's fixed. All of a sudden my Kies has started to recognize the fimware and tells me that the current version is the latest version!
So the new update of Kies fixed it?
My kies version is 2.3.2.12054_19[/QUOTE
From Serge75 : Hi gentleman ! could you try to send me your version 2.3.2.12054_19, I dont succeed to upgrade my version, looks like upgrading, but when I restart it, it's still with the previous installed version...
I guess installing it manually would more effecient. Could you send to me to [email protected], or could you give me a direct link where I could charge it directly, because Samsung Kies is not showing it ...
My greatest thanks and best regards
Could anyone tell me if I must change the Kies Version for the last in order to get the new ICS upgrade, or could I get it with any older Kies version ?
Serge75
Click to expand...
Click to collapse
The new version of Kies 2.3.2.12054/19 solved my problem now I can upgrade to ICS, but is it good idea? Is ICS better than GB?
Sent from my GT-N7000 using XDA