I'm using CM7 v22 and am unable to get VPN working (also using latest OC kernel). On an earlier version of CM7 (or was it Froyo? - so many flashes, I can't recall) I was able to get VPNC Widget working. It got me into my company's Cisco IPSEC VPN. But now, no go. In fact, VPNC now reports thar it can't access TUN device and "advanced routing has been disabled." I don't know where along the way this capability broke. Has anyone got a working VPN application?
I have TeamViewer up and running it has options for VPN.
Installed directly from there website.
I actually was able to use VPNC widget to connect to my work's Cisco VPN- details are here
Related
Anybody out there successfully doing IPsec VPN on a windows mobile device ?
I'm having a devil of a time getting anything working.
Thanks,
DLD
OK how about IPsec VPN with ANYTHING [email protected]#$?
DLD
Well, I finally got my Android Samsung Galaxy S3 (ICS) phone to connect to the Watchguard XTM 5 Firmware: 11.5.2 using IPSec. I followed the directions given by watchguard for connecting an IOS/OSX device. Then it was a matter of what VPN client to use. The default Android ICS VPN client under network settings would not work. I noticed that Samsung included a Third Party IPSec VPN client "AuthenTec VPN Client v2.5.1" (not able to find it in the Google Play store). This app did the trick with the default IPSec settings for Preshared Key IKEv1, with the Aggressive mode checked. My co-worker has the Samsung Nexus Tablet with Jellybean (4.1.1) and the native VPN tool works from that version, with default settings.
This discovery brings happiness and rejoicing to our entire IT team who all have Android phones or Tabs. I use 2X for RDP, (which works well), and "ES File Explorer" (free) for SMB file browsing. With these two tools I can do just about everything I did on my laptop. Anyone have better or more tools than these?
I have also tested IOS and Mac OSX 10.6.8 native VPN tool and they work well, as well as the original SSL client that has always worked.
WatchGuard should totally go public with this, many would benefit. It works great! (I wonder if there are some security holes that they are aware of that's preventing them from announcing Android support officially...)
can you share sir what app you used for us to use? i have and S3 also and we have a Watchguard XTM 5
End_Bringer said:
Well, I finally got my Android Samsung Galaxy S3 (ICS) phone to connect to the Watchguard XTM 5 Firmware: 11.5.2 using IPSec. I followed the directions given by watchguard for connecting an IOS/OSX device. Then it was a matter of what VPN client to use. The default Android ICS VPN client under network settings would not work. I noticed that Samsung included a Third Party IPSec VPN client "AuthenTec VPN Client v2.5.1" (not able to find it in the Google Play store). This app did the trick with the default IPSec settings for Preshared Key IKEv1, with the Aggressive mode checked. My co-worker has the Samsung Nexus Tablet with Jellybean (4.1.1) and the native VPN tool works from that version, with default settings.
This discovery brings happiness and rejoicing to our entire IT team who all have Android phones or Tabs. I use 2X for RDP, (which works well), and "ES File Explorer" (free) for SMB file browsing. With these two tools I can do just about everything I did on my laptop. Anyone have better or more tools than these?
I have also tested IOS and Mac OSX 10.6.8 native VPN tool and they work well, as well as the original SSL client that has always worked.
WatchGuard should totally go public with this, many would benefit. It works great! (I wonder if there are some security holes that they are aware of that's preventing them from announcing Android support officially...)
Click to expand...
Click to collapse
The only available client that I have been able to get work is ncp vpn client with a mobile user ipsec tunnel to connect to my watchguard x515
Ran trial for a week and just pulled the trigger.. Very happy.
Sent from my SAMSUNG-SGH-I747 using xda premium
Hi All,
I've made a program supporting all originally supported wifi protocols as well as WPA/WPA2 enterprise protocols. This program can be used to set up connection with wireless networks using enterprise protocols.
What you need to do is to select proper protocol/authentification methods. Provide certification files if you have them. You can put certs files anywhere in your SD card. Then click OK.
You need to disable your wifi and re-enable it. Root is required.
Please visit my blog for more updates: http://fredzhung.blogspot.com/
** THIS IS NOT WELL TESTED, But works for Purdue University. (WPA ENTERPRISE WITH THAWTE_PREMIUM_SERVIER certs.)**
[UPDATE MAY-11] 1.0.2 RELEASE
ADDED SUPPORT FOR AD-HOC!
Added support for memorizing all configurations.
Need some test.
[EDIT] v0.2 RELEASE.
fixed a bug connecting to open network.
added support for anonymous indentity in EAP
added help/about
added input validation
changed icon
If this Wifi Helper doesn't work with your company's/school's wifi settings, please provide me your wifi setup so I can figure out what's wrong.
There seem to be a bug that first time run will hang. Close the program when the "force close" window pops up. Then run it again. Add the program to superuser list when asked.
This seem to be a bug for all applications requiring root access in android 1.5. I tested with terminal emulator and it has the same bug as well. Something is wrong with superuser program.
The app is uploaded to Market. Have fun!
Using this to access wifi on campus
Hi
I am a novice at all this root stuff so my questions is straightforward
a) If i buy a G1 (not rooted etc) and install this application from the market, i should be able to access my campus wifi? This is one reason why I am still using the iphone (unlocked on tmobile).
b) Is this likely to work even after the 1.5/cupcake transition that seems to be imminent?
Thanks
ps I am at LSU and here are some of the wifi details for the campus:
http://grok.lsu.edu/Article.aspx?articleId=8198
Hi, if you buy a g1 from store, you need to root it first before using this app. totorials for rooting your phone can be found on the sticky threads.
After you root your phone and use this app, you should be able to connect to your campus wifi. This is the purpose of this app.
May 11: 1.0.2 is released. Available in market
Hey zhang!
Great work, but i am having problems getting the ad-hoc to work.
It's been setup on my laptop and i have tried w/WPA & open to no avail.
The phone does not seem to detect the network.
I'm running 1.5 JF ADP.
Any thoughts as to what i might be doing wrong?
And thanks for the ad-hoc capability, been waiting on that one
Sean
Hi Sean,
I've been doing experiments with adhoc, I am not 100% sure adhoc will work. I will keep trying.
Great, great, great job!
I'm gonna buy the pro one, just as a "thank you"..
It seems it won't even detect my adhoc network
Hi. I use the free version (will buy it if it actually works) but I can't seem to even detect my adhoc networh. I use the ICS on XP laptop. I setup an open network with no encryption for the test but the G1 doesn't detect it (it sets it up and says it's unavailable, thus allowing me only to "forget" it). Do I have to change anything else on my device (for example the tiwlan.ini) so my device actually shows those elusive adhoc networks. Has anyone actually succeeded to setup properly an adhoc connection on G1 ever with any kind of software or is it like the UFO - we hear it exists but we've never actually seen it?
I cna't get it to work on my university's WPA2 Enterprise with a 'GTE CyberTrust Global Root' certificate (with extention cer).
I'm using a Vodafone Magic
I am also having a problem with a WPA2 enterprise setup.
It is a eduroam network.
On my computer I have entered the following setup in wicd:
encryption: PEAP with TKIP/MSCHAPv2
identity: my username
password: my password
In the wifi list (in the android system menu) the eduroam network shows as "Not in range, remembered"
I have another problem with the app itself: "Modify configurations" does not work. This makes it a hassle to try different encryption settings.
I know the network also works with PEAP with GTC, but don't know how to set that up.
Where did this go? It's no longer on the market. I can't find it anywhere!
Yeah, I was looking for this app and can't seem to find it anywhere. It disappeared. Does anyone have the apk?
Boogy
Try WiFi Buddy...free and works great.
All you had to do was go to his site...
http://fredzhung.blogspot.com/2009/05/download-for-wifi-helper.html
Hey all,
i have a Cisco VPN profile consisting of the following:
VPN HOST
VPN Groupname
VPN Grouppassword
VPN Username
VPN Userpassword
Search Domain
On my Nexus i use CM RC3 with Open VPN, BUT:
Where do i enter those credentials in the OpenVPN settings exactly?
Can anyone guide me through?
THANX
Tigger
You could try this app:
http://code.google.com/p/get-a-robot-vpnc/
I haven't had much luck with it, the domain setting doesn't seem to work for me.
I'll post more detail later when I'm near a full size keyboard.
Sent from my Nexus One using XDA App
THX, gonna try this
Edit:
i was able to establish a connection, but only via WiFi, not via EDGE
What can i do about this issue?
Also, this whole thing is totally unstable...
Edit 2:
i was able to set up a connection ONCE... but never again =(
There is an app called vpn connections that I'm use fairly regularly to connect to a cisco vpn. It might be worth a try.
i did. the result is above your post -.-
no one to help me with this? =/
**UP**
still noone?
recently i installed the last eclair kernel from Dalingrin (2/25/11), which among other great things, implements netfilter/iptables
i was able to install both TransProxy and AsProxy, but since i need ntlm authentication to connect to the internet in my office, only AsProxy would be useful for me, but when i hit the start button, it says that the iptables were not found.
has anyone been able to connect to the internet thru a proxy server (in my case an ISA Server), with any of the above mentioned programs or another one?
Have you gotten your iptables to show up yet?
I havent gone the route of ROM yet but I probably will have too. I have asproxy and Orbot (TOR client) installed but without iptables they are useless.
wrenchneck said:
Have you gotten your iptables to show up yet?
I havent gone the route of ROM yet but I probably will have too. I have asproxy and Orbot (TOR client) installed but without iptables they are useless.
Click to expand...
Click to collapse
I have the same issue too. Peharps Dal could compile the Kernet to support iptables.
What I had to do for this is set up OpenVPN... Violates my work policy, but oh well. Couldn't figure out how to get it set up any other way.
Technically I did set up an access point on a CentOS box with a transparent proxy, but that doesn't handle syncing which I need at work as I use my tablet during meetings and need to have my schedule up to date etc..
Did you heard about Honeycomb 3.1? Now you can set up proxy and user/psw on the wifi configuration. Nice.. It should be very nice if CM7 got this too...
I've been running different builds of Cyogenmod7 for quite a while & I can't get VPN (PPTP or OpenVPN) to work through the Cyogenmod settings or with 1VPN. I can, however, get it a VPN to run with OpenVPN Settings (from the market). However, OpenVPN settings is a bit of a pain since I have to enter in my username/password everytime I connect.
Anyone know how to either have OpenVPN settings remember my username/password or know of a rom that works with 1VPN?
Thanks!
I gave up on trying to get VPN to work, ended up being more of a pain then was worth it. I instead setup an SSH server on my Home computer and connect to it using ConnectBot app. Using Port Forwarding in the app I can access pretty much whatever I would of wanted to on a VPN like VNC, SMB, Upnp Media Server, ect... Everything done over the SSH is Encrypted as well so you could use it even on an Open/Public WiFi connection without fear. Only thing I have yet to try to do is forward Internet Browsing over the SSH connection, would probably require me to setup a Proxy server on the PC.
____________________________________________________
Sent from NookColor CM7 uSD using Tapatalk