is there any info regarding custom roms or custom kernel for galaxy mini?
so we can overclock or get better performance for this phone....
thanks,
also...is any update to gingerbread?
thanks,
really waiting for it
I have to start developing the kernel, for the custom rom is not yet.
For now i focusing to overclock and add more feature in kernel.
The progress until now is i can get stable on 800mhz.
Sent from my Ideos
please provide an update...
tj_style said:
I have to start developing the kernel, for the custom rom is not yet.
For now i focusing to overclock and add more feature in kernel.
The progress until now is i can get stable on 800mhz.
Sent from my Ideos
Click to expand...
Click to collapse
hallo tj_style , so your member of this board too, remember me "cacau" member of kaskus forum lil G.
say how do you manage to install the custom kernel into your lil G, coz im having dificulties to maping the bml partition?
any updates?
Sent from my GT-S5570 using XDA App
Can't wait for this
Yeah.. I really can't wait for this
Sent from my GT-S5570 using XDA App
NOTE: Me are not responsible any problems caused by installed kernels.
So, Do it at your own Risk..!
For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.
Step:
1. Download the needed file --> TASS_OC.7z
2. Extract TASS_OC.7z
3. Run S5570_Odin Multi Downloader v4.38.exe
4. Click OPS button and choose TASS_v1.0.ops
5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
7. After Odin detected the Phone, Click Start button
8. Wait for flashing process is finnished, and install SetCPU or similliar tool.
After that, you can configure the frequency...
For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.
Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.
I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..
Just press Thanks button if you like my compiled kernel..
Cool! Finally, we have one Thank you!
Besides OC, what are/is the difference of this ROM from the stock?
Does it still use Samsung file system (rfs) or ext2/4?
Great. But how about the battery usage?
Post it to kaskus lil'G Forum.
tj_style said:
NOTE: Me are not responsible any problems caused by installed kernels.
So, Do it at your own Risk..!
For flashing this kernel is need the root access, because it will use SetCPU or similiar tool for managing the frequency.
Step:
1. Download the needed file -->
2. Extract TASS_OC.7z
3. Run S5570_Odin Multi Downloader v4.38.exe
4. Click OPS button and choose TASS_v1.0.ops
5. Clink PDA buton and choose CODE_S5570DXKA8_REV02_OC.tar.md5
6. Power up Phone to Download Mode (Center key + Vol Down key + Power key)
7. After Odin detected the Phone, Click Start button
8. Wait for flashing process is finnished, and install SetCPU or similliar tool.
After that, you can configure the frequency...
For back to stock kernel, the step is same as above. but you choose the CODE_S5570DXKA8_REV02.tar.md5 for PDA.
Note: If the phone is hang or reboot, choose the lower frequency until you find the stable frequency.
I can play AngryBird RIO very smooth on 825MHZ with Performance for Scaling profile..
Just press Thanks button if you like my compiled kernel..
Click to expand...
Click to collapse
can you post a screenshot of your setcpu settings, im completely noob on this one
SetCPU Setting:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SetCPU Info:
tj_style said:
SetCPU Setting:
View attachment 562013
SetCPU Info:
View attachment 562014
Click to expand...
Click to collapse
why is is that yours is 844 mhz, minei s just at 825
deathbringer6 said:
why is is that yours is 844 mhz, minei s just at 825
Click to expand...
Click to collapse
for now the 844mhz is not yet stable. so I release the stable kernel (825mhz)
Sent from my Ideos
im getting lots of crashes and restarts, any help?
Sent from my GT-S5570 using XDA App
deathbringer6 said:
im getting lots of crashes and restarts, any help?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
there's not any crash in my galaxy mini. i use S5570DXKA3 firmware.
Sent from my Ideos
Wow.. finaly!! Thanks a lot bro..
tj_style said:
there's not any crash in my galaxy mini. i use S5570DXKA3 firmware.
Sent from my Ideos
Click to expand...
Click to collapse
im using dxka8 maybe a firmware conflict?
Sent from my GT-S5570 using XDA App
Related
!!! IMPORTANT !!!
This is an experimental attempt.
The system might be made unstable, and the device be damaged.
Therefore, I do not recommend this to be used daily.
---
Last week, I found a hint of overclocking.
Droid Eris Android Development: a thread by zanfur
http://forum.xda-developers.com/showthread.php?t=679102
Click to expand...
Click to collapse
And at last, I succeeded to do it.
To say the conclusion at first, it works fine around 730MHz while a week.
At 768MHz and more over, it causes hunging up the system frequently.
Over 800MHz? I couldn't in this time. I think it needs VDD control and managing the freq tables more better to do it.
To get resources for overclocking, please refer the second post.
resources
The update for CM6RC2 on Legend: here to download. (build26, zipped)
FIXED: PERFLOCK disabled
Only the 'kernel' module for test other ROMs: here to download. (build26, not archived)
FIXED: PERFLOCK disabled
How to do it for kernel_legend_13be9c9c:
At first, you should read zanfur's post and his patch.
I just modified two tables in acpuclock-arm11.c excluding his having written.
1. modify cpufreq.c to let SetCPU to access freq tables
2. modify acpuclock-arm11.c to let HTC Legend be able to overclocking
3. modify msm7227_defconfig to disable PERFLOCK [optional]
You might not need modify defconfig when you use SetCPU which can purchase in Android Market.
SetCPU can disable PERFLOCK by setting. ([menu] -> [Perflock Disabler])
(acpuclock-arm11.c which I use is here)
FIXED: updated the correct file
Congratulations!
I will test soon
build26
My first kernel (build25) was built with CONFIG_PERFLOCK=y.
SetCPU can disable PERFLOCK.
However, I noticed there were few users of SetCPU now.
So I built it for HTC Legend users who do not have SetCPU.
Thanks,
Thanks to you, Kyosa, you make better this community with your work.
Screenshots
SetCPU - Recommendation settings
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Linpack - The result at 768MHz
Quadrant - The result at 768MHz
EDIT: resize images, rescaled at 768MHz and modified a banner for gentlemen and kids
Hi, if i use your CM6 RC2 Rom, is it just to flash this one: The update for CM6RC2 on Legend: here to download. (build26, zipped)
FIXED: PERFLOCK disabled and flash it with Clockworkmod then its done?
Edit, fixed it. I just flashed the One i talkd about and it Works perfect
OMG...940!!!!! I'm still on Eclair Rom with Sense and Quadrant gives me only 378 pts ....so far from your result!
Just a question: does your kernel module work with Eclair too ?
what do i wrong:
i follow all the step's but when i flash the patch my phone doesnt do anything.
it keep showing the HTC logo on a white screen.
if i flash the normal cm66 my phone works great again.
whitecobra87 said:
what do i wrong:
i'm follow the all the step's but when i flash the patch my phone doesnt do anything.
it keep showing the HTC logo on a white screen.
if i flash the normal cm66 my phone works great again.
Click to expand...
Click to collapse
Have the same problem with CM Legend 6.0.0 RC2 Build 66.
I have the same problem. Maybe someone could make a CM6RC2 build with OC-kernel?
Koysa: Thank you for all your work on the Legend
SRD720 said:
I have the same problem. Maybe someone could make a CM6RC2 build with OC-kernel?
Koysa: Thank you for all your work on the Legend
Click to expand...
Click to collapse
Working fine here with build 66
nobody could run?
ahh... It seems too immature to release.
give me a time to solve the problem on booting up.
I apologize that it is no use.
P.S.
My testing flow is below.
1. flash CM6RC2-build66 (with ClockWorks Recovery)
2. flash this kernel (build26) WITHOUT WIPE (with ClockWorks Recovery)
3. run SetCPU or other overclock tools
kyosa said:
nobody could run?
ahh... It seems too immature to release.
give me a time to solve the problem on booting up.
I apologize that it is no use.
P.S.
My testing flow is below.
1. flash CM6RC2-build66 (with ClockWorks Recovery)
2. flash this kernel (build26) WITHOUT WIPE (with ClockWorks Recovery)
3. run SetCPU or other overclock tools
Click to expand...
Click to collapse
Strange that it works for some people with build 66 and not for some people with the same build, hope you manage to solve that, have been waiting for this for some time now
Can anyone make a zip to test with official 2.03 rom? I'm very unexperienced so I don't know what to do with just the kernel file.
Anyways keep up the good work
It Works for me with cm6 rc2 build 66, just flashed it with clockwork
Sent from my HTC Legend using Tapatalk
I have the same problem when trying to flash on cm6...
To the people who have managed to flash it succesfully, is the cpu overclocked as soon as you boot, or do you have to change it in setCpu?
If so, maybe the problem as to why it works for some people and not others is that some cpu's cannot take the stress of the overclock and others can?
MichaelAlexanderBull said:
I have the same problem when trying to flash on cm6...
To the people who have managed to flash it succesfully, is the cpu overclocked as soon as you boot, or do you have to change it in setCpu?
If so, maybe the problem as to why it works for some people and not others is that some cpu's cannot take the stress of the overclock and others can?
Click to expand...
Click to collapse
i use SetCPU to toggle the overclock, and on mine it works perfectly
Works right out of the box for me with kyosas cm6.
Question: I am not really interested in overclocking, speed is fine as it is. But will this kernel make it possible to save battery by underclocking? Does the original kernel lower cpu speed e.g. at screen off? Or do I need this kernel and SetCPU profiles to lower cpu frequency?
Hello,
Is there any improvements in 3d gaming? Raging Thunder 2 or Gameloftgames for example...
greetz
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
-----------------------
Prerooted incl. ADB root
Deodex
UA String
AdFree Hosts (No More Ads)
Themed
Installation ( More detailed on http://stefan-developer.us/2011/08/broodcomb-gt-p7500-xwkg9-3gromcwm/ )
-----------------------
(If coming from XWKG9 STOCK, Skip to step 5.1)
1. Download Stock Rom P7500-XWKG9 EUR 3G Only http://www.multiupload.com/SGV6N78YY7 [password: samfirmware.com] (Source http://www.samfirmware.com/)
2. Download ODIN3 V1.85 http://forum.xda-developers.com/attachment.php?attachmentid=581913&d=1304094576
3. Extract stock rom somewhere on your computer also Odin, run Odin and don't touch anything except PDA where you will select previously extracted stock file.
4. Put Tab in Download mode, connect tab to computer, power off, hold power off and volume - till you see two icons then press volume + and if it ask are you sure pres volume + one more time and you are in download mode then ( order of buttons is _power_ _volume -_ _volume+_ )
5. You should see yellow background on first box of odin and that is good your Tab is ready to flash, then click start on ODIN and wait till it reboot.
5.1 Boot in recovery ( Because stock doesn't have if you was following from step one do the root your Tab, as it is on this topic, so download this and put it on the sdcard, then put your Tab to Recovery mode power off, hold power off and volume - till you see two icons then press volume - ,then volume + and you should go to apply update zip file and you will select this file and when it is done you should reboot your device. )
6. Make a nandroid backup
7. Wipe data/factory reset
8. Flash BroodComb Alpha
9.Reboot and enjoy
Boot will take a while coz cache is cleared also factory mode is reseted so don't worry everything is fine.
--------------------------------
Screens
some screenshots would be nice!
Back in a flash ! =)
Nice stuff and a screenie idd would be nice
Sent from my GT-P7500 using Tapatalk
Seems to be fine men, much appreciate <3
Sent from my GT-P7500 using Tapatalk
Very nice work man. Keep on improving it, i'll be happy to test.
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Will make some screens when i get home sorry i was in hurry, regarding OC i think we will not see that coze source code for our kernel is not yet released...pity :/
Sent from my R800i using XDA Premium App
Never mind... sorted it out
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
will try this after download finish
tedbears said:
Excuse me if this question looks stupid , what is meant by "flashing" in the eighth step? Is flashing using Odin or CWM? I'm already hv xwkg9 root and cwm installed. thanks
Sorry for my bad english..
Click to expand...
Click to collapse
Cwm you should use Recovery mode = CWM , Download mode = Odin, np you are free to ask..we don't want to brick your tab...
Sent from my R800i using XDA Premium App
ca110475 said:
Just a clarification, is it me or a valid kernel for overclocking purposes is NOT available yet for the P7500?
Click to expand...
Click to collapse
Please could someone return a answer to his/her question?
Thank you very much.
Fianlly, first custom 3G rom. Thank you for this mate. Is it possible to have pure HC rom without crapwiz?
Thx
Sent from Galaxy Tab 10.1
mr_at_sgs said:
Please could someone return a answer to his/her question?
Thank you very much.
Click to expand...
Click to collapse
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
secretfile said:
I already answered his question, we don't have source for karnel so you can't compile it..it is simply as that..i can change in properties but kernel will not allow it we need to wait for the kernel... stupid samsung
Click to expand...
Click to collapse
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
I wonder from where on earth he got the source code, i doubt he disassembled it , but i am ready to try it out it simply can't harm also overcloock would be nice
wojmzy said:
Might be a silly question from new 10.1 3G 16GB user but i have to ask since custom roms are developed.
My version is GT-P7500XXKG7 - can I safely flash XXKG9 on that device?
Click to expand...
Click to collapse
Sure you can i was on it first time then flash it over with ODIN... so it is safe...
receptorB said:
The 8/9/11 kernel variant from pershoot runs on kg9 with working 3g, but it has a bad battery bug and was dropped from his website. A better version will be released in the next hours. If you cant wait, they asked for p7500 testers on his thread.
Sent from my GT-P7500 using XDA App
Click to expand...
Click to collapse
Hmm i tryed that kernel but somehow on my device 3g [GT-7500 not 10.1V] was not working.. maybe my tab is isolated problem?? can someone verify that his kernel is working?
Can you please post that sick wallpaper? And any others that you may have included? Haven't decided if I want to switch ROMs just yet and couldn't find the wallpapers in the zip...
Thanks!
I hope this is the right place to post this. Apologies to mods in advance if not.
I need expert advice.
I have the Galaxy S Hoppin SHW-M190S which i purchased second-hand. This is a newer version of the M110S, which also has a thread here in the forum.
I find it to be a really sturdy smartphone and to me it looks sleeker than the Galaxy S i9000 or even the M110S.
My phone currently runs Gingerbread 2.3.4 and i really need to root this to be able to configure adhoc wifi.
Can you tell me how to go about rooting this? I once had an M110S - do i use the same procedure and files?
Till now i have not found any information on the rooting of the M190S. So, your advice would be greatly appreciated.
Thanks much!
is Samsung Galaxy S Hoppin can be rooted too?
cheeze.keyk said:
is Samsung Galaxy S Hoppin can be rooted too?
Click to expand...
Click to collapse
You can Flash a Tegrak Kernel for your Phone, If your ROM is up to date from http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://pspmaster.tistory.com/120 will give you root , lag fix and recovery options, once you install Tegrak Kernel app from google market ( free app)
or you can try the rooting tools from Collections for Android link below
is it safe to root M190S?
cheeze.keyk said:
is it safe to root M190S?
Click to expand...
Click to collapse
sure, most people on this forum are rooted, Koreans versions too
M190s rooted and overclocked
I got my m190s rooted and overclocked using the tegrak kernel. : )
jacoles2 said:
I got my m190s rooted and overclocked using the tegrak kernel. : )
Click to expand...
Click to collapse
ill try that tegrak kernel..
Why is it when i open d tegrak kernel app on mt m190s it keeps on loading? And it says: failed to connect tegrak service. Please install the Tegrak Kernel first. :/
Sent from my SHW-M190S using xda app-developers app
cheeze.keyk said:
Why is it when i open d tegrak kernel app on mt m190s it keeps on loading? And it says: failed to connect tegrak service. Please install the Tegrak Kernel first. :/
Sent from my SHW-M190S using xda app-developers app
Click to expand...
Click to collapse
because, you need to flash the tegrak kernel first using odin, only after that the app can function
Gueave aide-de-camp
sir, can you teach the step on how to flash Tegrak Kernel using Odin?
cheeze.keyk said:
sir, can you teach the step on how to flash Tegrak Kernel using Odin?
Click to expand...
Click to collapse
download the M190S tegrak kernel from earlier link , than start odin select that file under PDA and click start ( don't tick anything else or click anything else )will take 2 seconds or more and you should be done
While phone is off, press and hold power + mid button (between the 2 capacitive ones) til you reach Download Mode. You should see weird korean characters in yellow.
Proceed with flashing Tegrak via odin.
Sent from my SHW-M190S using xda premium
I really hope some devs can cook cutomized roms for this phone. But it appears theres only a handful of M190s users and mostly reside in Korea
Sent from my SHW-M190S using xda premium
any update??i dont know how to root this unit.
leadguitar said:
any update??i dont know how to root this unit.
Click to expand...
Click to collapse
download Tegrak kernel , you must be using latest firmware WD19, if not use KIES to update to WD19 and flash that kernel under PDA in Odin 3, you will get Recovery ...you also need to download tegrak kernel from google play ( freeware) to root it as well as other options
sir idont understand.please elaborate the conclusion its so hard to fallow.if you can upload scrren shots i will appriciated.thanks,.
leadguitar said:
sir idont understand.please elaborate the conclusion its so hard to fallow.if you can upload scrren shots i will appriciated.thanks,.
Click to expand...
Click to collapse
sorry, I don't use M190S, so this is basic for all tegrak Kernels http://forum.xda-developers.com/showthread.php?t=920711
This rooting guide was written for M110S by me , so just switch kernel file for your model http://forum.xda-developers.com/showpost.php?p=26402069&postcount=4411 and it should work fine
flashing guide by tegrak http://translate.google.com/translate?hl=en&sl=auto&tl=en&u=http://pspmaster.tistory.com/120
sir, i already updated my m190s to Wd19. whats next? do i need the Update.zip file or not?
i successfully rooted my M190S..:laugh::good:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
thanks XDA
any ICS update on m190s?
HI I want to install the KingDroidICSROM and other ROM but none of them work and i dont know why it either end up in boot loop
or restart in recover mode...
i recently started my first android which is galaxy 9003 and switch to my second galaxy note
i still can root it and get super user and install CM9 but what i really want is
i want a custom ROM but with all the samsung apps in it and the main thing i wanna do is
to OC it to at least 1.7 GHZ for daily use or maybe even 1.8 until note 2 is out
this is what i have now
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
starcraft2010 said:
HI I want to install the KingDroidICSROM and other ROM but none of them work and i dont know why it either end up in boot loop
or restart in recover mode...
i recently started my first android which is galaxy 9003 and switch to my second galaxy note
i still can root it and get super user and install CM9 but what i really want is
i want a custom ROM but with all the samsung apps in it and the main thing i wanna do is
to OC it to at least 1.7 GHZ for daily use or maybe even 1.8 until note 2 is out
this is what i have now
Click to expand...
Click to collapse
Hey man whatever question you got ask it in the Q&A..this section is for development buddy...please read forum rules and remove this thread...and to the two posters above me, please be polite guys no need to be rude all the time..treat a new guy with respect!
Sent from my GT-N7000 using xda premium
*reported* Mods plz delete or move!
Whatever be it a new guy or noob.....u are on xda...first read....then search xda and google.......i bet you will get it...but still if u don't get the info then create a thread in the CORRECT section!
OC to 1.8ghz and you can't flash a rom rofl u serious ?
Sent from my GT-N7000 using xda app-developers app
people always want an easy quick fix
go to question section friend
But try flasgin my 3.4 Resurrection rom
http://forum.xda-developers.com/showthread.php?t=1618705
you might have problems with locked bootloaders since you have a stock XXLRB ROM there
GTN? Seventy thousand? You were in the About screen man, and you didn't remember your own model...?
Aaaaaaaanyway, enough with flaming, at least from me.
What you need to do is : perform a full wipe (make sure you flashed NoteCore kernel first) in Recovery, then flash CleaNote (in Recovery). Then reboot. That should not result in a boot loop .
So, flash THIS (kernel). Then THIS (ROM). Then THIS (that's a fix). Then flash the kernel you flashed earlier, again. Then wipe cache and dalvik. Then reboot.
And regarding your desire to have THAT high overclock... There's a NoteCore kernel variant which overclocks the CPU to 1.6 GHz and the GPU to 400 MHz (CPU is stock clocked at 1.4 GHz, GPU at 267 MHz). That's pretty high, if you ask me. Besides, I'm sticking to the standard version (stock frequencies), and this thing is blazing fast... so... unless you want to tie your phone to 3-9 external monitors to play NFS The Run, no, you don't need overclocking...
Formhault said:
GTN? Seventy thousand? You were in the About screen man, and you didn't remember your own model...?
Aaaaaaaanyway, enough with flaming, at least from me.
What you need to do is : perform a full wipe (make sure you flashed NoteCore kernel first) in Recovery, then flash CleaNote (in Recovery). Then reboot. That should not result in a boot loop .
So, flash THIS (kernel). Then THIS (ROM). Then THIS (that's a fix). Then flash the kernel you flashed earlier, again. Then wipe cache and dalvik. Then reboot.
And regarding your desire to have THAT high overclock... There's a NoteCore kernel variant which overclocks the CPU to 1.6 GHz and the GPU to 400 MHz (CPU is stock clocked at 1.4 GHz, GPU at 267 MHz). That's pretty high, if you ask me. Besides, I'm sticking to the standard version (stock frequencies), and this thing is blazing fast... so... unless you want to tie your phone to 3-9 external monitors to play NFS The Run, no, you don't need overclocking...
Click to expand...
Click to collapse
thanks for your suggestion i dont really need to OC that much just want to try it that all
as for custom rom which is the first thing i want to try is to use some nice custom rom i find here... but so far the only custom rom i can use is the CM9 or the samsung stock rom... and i want to see if it possible to use custom rom and be able to keep all the samsung apps at the same time
starcraft2010 said:
u started first not me punk
Click to expand...
Click to collapse
Lol? I didn't insult *you*.
I helped you, actually.
Sent from my GT-N7000
Formhault said:
Lol? I didn't insult *you*.
I helped you, actually.
Sent from my GT-N7000
Click to expand...
Click to collapse
you can ask nicely next time
starcraft2010 said:
you can ask nicely next time
Click to expand...
Click to collapse
Just... gtfo.
Sent from my GT-N7000
cant resist:
In Before Lock
Just made it buddy.
Closed.
First of all, thanks to TheWhisp and hims team for the awesome CyanogenMod 10 ROM
I am not responsible for any damage done to your phone.
ok, lets start.
We have an galaxy mini with stock 2.1/2.2 rom.
Firstly we will need this -> Download
1.download and unzip to desktop
2.Install Samsung Drivers
3.Open Odin Downloader
4.Choose OPS File TASS_v1.0.ops
5.Choose One Package and choose Firmware File: S5570BVKQ4_S5570OROKQ4_S5570BVKQ5_HOME.tar
6.Power OFF Phone
7.Now put phone in DOWNLOAD MODE (Volume DOWN + HOME + POWER)
8.conect phone to usb cable and let windows to install drivers
Note*: Odin will detect your phone
9.Next click start and wait untill Odin will show PASS message
Now we have a Galaxy mini with stock Gingerbread ROM (2.3.x)
SCREENSHOT 1
what we do next?
10.open Odin Downloader
11.Choose OPS File TASS_v1.0.ops
12.Check in Odin "One Package"
13.Choose CWM-5.0.2.8-Touch2-yagya.tar
14.Put phone in DOWNLOAD MODE (Volume DOWN + HOME + POWER)
15.Conect usb calbe to phone and click START in odin
SCREENSHOT 2
Now we have galaxy mini with stock 2.3.x rom and custom recovery installed.
what to o next?
16. Download and copy to SD-CARD CM-10 ROM and JB-GAPPS (Look to CyanogenMod10 Thread in Android Original Development)
17. Power Off Phone
18. Press HOME + POWER BUTON (4 sec after Samsung logo appears)
now we are in recovery, what to do?
19.Navigate to Wipe all user data/factory reset -> yes - wipe
20.Navigate to Wipe Cache Partition - yes -wipe
21.Navigate to Advanced - Wipe Dalvik-Cache -> yes - wipe
22.Navigate to Flash Zip from sd-card
23.Choose zip from sd-card
24.Choose CM10 zip file, whait untill flash done, and flash Gapps
25.Reboot your Phone
Enjoy.
Also you can install aditional packages to improve performance of you phone
Performance Pack by michie
Soft-keys Pack by michie
A2SDX - DATA TO SD-EXT by michie
Screenshot 1.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshot 2.
why did u change the name from CM10 to CMX ? people will think its squadzone's CyanMobile X !! LOL...edit the title please..
U should also add links for increasi g memory in cm10 (sd-ext) , performance pack by michie , gapps link , softbuttons enable and disable
Sent from my GT-S5570 using xda premium
CyanogenMod X (Roman numbers, not arabic) I II II IV V VI VII VIII IX X
Sent from my GT-S5570 using Tapatalk 2
ensoy said:
CyanogenMod X (Roman numbers, not arabic) I II II IV V VI VII VIII IX X
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
i know that duhh..but the 1st impression it gave me was squadzons cyanmobile..
cm10? has anyone tried this one? is it only for galaxy mini or it can be flashed also on mini 2.?
Diable Jambe said:
cm10? has anyone tried this one? is it only for galaxy mini or it can be flashed also on mini 2.?
Click to expand...
Click to collapse
i am using cm10 dayli.
and no, you cant flash it to SGM2
S5570BVKQ4_S5570OROKQ4_S5570BVKQ5
These firmwares are good for all countries?
Rosario55 said:
S5570BVKQ4_S5570OROKQ4_S5570BVKQ5
These firmwares are good for all countries?
Click to expand...
Click to collapse
using it for a long time
p.s. My Country is Republic of Moldova
killar_aka_arabu said:
using it for a long time
p.s. My Country is Republic of Moldova
Click to expand...
Click to collapse
thanks
From samfirmware site, i have seen that BVKQ4 is for Romania. Is it good for Italy?
Rosario55 said:
thanks
From samfirmware site, i have seen that BVKQ4 is for Romania. Is it good for Italy?
Click to expand...
Click to collapse
yes, you can install it, but after this you will need to fix gps (gps fix app from market)
support mobilicity mini?
hi, will this work on the mobilicity sgh t499y?
Thanks
p.s. Why did they call different phones the same name?
anyone?