So I finally took the plunge and picked up the Nook color, bought it second hand with HC already on the eMMC so I am not sure exactly how anything was done before. I have been reading the guides and while not completely lost, there's just some things I am unclear of right now.
I installed Rom Manager to install CWR, after installing and flashing it I cant access Recovery, but wasnt sure if it ever worked. Was this the wrong way to go about getting CWR on the unit? I am trying now to boot into a default CWR SD card and run a fix from this thread hoping thats the issue
http://forum.xda-developers.com/showthread.php?p=11591197
I dont really have a need for the Stock config so putting everything on eMMC for me sounds ideal and am currently trying to get the dual boot config from here running.
http://forum.xda-developers.com/showthread.php?t=959461
Question now is if I get CWR running from the sd card, can i just apply the prep file and load the pre configured installations from that page? Does the dual boot both boot from eMMC? Will I need to format my existing solution to install that setup?
Thanks for any feedback.
s0n- said:
So I finally took the plunge and picked up the Nook color, bought it second hand with HC already on the eMMC so I am not sure exactly how anything was done before. I have been reading the guides and while not completely lost, there's just some things I am unclear of right now.
I installed Rom Manager to install CWR, after installing and flashing it I cant access Recovery, but wasnt sure if it ever worked. Was this the wrong way to go about getting CWR on the unit? I am trying now to boot into a default CWR SD card and run a fix from this thread hoping thats the issue
http://forum.xda-developers.com/showthread.php?p=11591197
I dont really have a need for the Stock config so putting everything on eMMC for me sounds ideal and am currently trying to get the dual boot config from here running.
http://forum.xda-developers.com/showthread.php?t=959461
Question now is if I get CWR running from the sd card, can i just apply the prep file and load the pre configured installations from that page? Does the dual boot both boot from eMMC? Will I need to format my existing solution to install that setup?
Thanks for any feedback.
Click to expand...
Click to collapse
HC, as far as I know, is the only rom that does not respond well to cwr installed internally (I have had those issues). If you get an sd image of cwr burned, you can add any flashable rom to that same card and flash it in recovery (install zip from sd card). If you want to play with CM7, do a backup of your HC rom from your sd card, do your formats and flash the gb rom. I think in theory, if you wanted cwr installed internally, you can load a cwr zip on your cwr card and flash it. I have not tried to dual boot anything, so can not offer any feedback.
bdcrim said:
HC, as far as I know, is the only rom that does not respond well to cwr installed internally (I have had those issues). If you get an sd image of cwr burned, you can add any flashable rom to that same card and flash it in recovery (install zip from sd card). If you want to play with CM7, do a backup of your HC rom from your sd card, do your formats and flash the gb rom. I think in theory, if you wanted cwr installed internally, you can load a cwr zip on your cwr card and flash it. I have not tried to dual boot anything, so can not offer any feedback.
Click to expand...
Click to collapse
So I ran the fix permissions and now I can boot into Recovery From Clockwork or boot from the SD card. There are a couple problems, in order to install the dual boot I need to run recovery from the eMMC but that doesnt seem to mount my SD card or I need to adb into the recovery so I can permission something to run, however doesnt seem to have adb running in Recovery and I dont see an option to restart it.
Alright so everything is working, had to format the SD card. Guess CWR SD sets it up as a boot partition so it wasnt mounting, dual booting froyo + HC, just have to figure out the OC kernels now for each.
I've already got my SD card ready to root my nook, and the files are ready to install hc v4 2nd...i can't wait this should hold me over until the 10"ers come down in price
Related
I know, its not truly bricked. But as of right now it'll only power up if connected to USB power source and will only boot as far as landscape Android text with a blinking underscore. Part of why I didn't get it fixed last night was my unwillingness to leave and aquire a larger micro SD card. I'll be leaving work in a couple hours to go get some stuff to get this thing working again (its 2 days old) heres the recovery plan:
Aquire 4GB + MSD card
Flash a stock 1.1 ROM (the one thats pre-rooted here)
Install (sideload) that stock joint
Read that Elephant book that comes with the Nook because its working again
From there I'm a little confused. Can I flash Clockwork to a MSD and then use that to flash CM7? Or am I oversimplifying here?
From my trial and error the only thing I have gotten to "un-brick" is to boot into monsters pack then switch cards (i used the 128mb version and it removed the rest of the space on my 2gig card) then format cache and system in the mount section of clockwork. then head to install zip and installed a complete restore to 1.0.1. when thats done I head to BN site and got the side load to 1.1.whatever and let it do its thing. From there your up to date and just like new and can then try and "re-brick" it. Ive had mine for less than a week and done this a few times now cause I am never satisfied.........
The nook is never bricked unless it has a hardware failure. One of the great things about the nook is that it has a very early hook in the boot sequence that checks for presence of a bootable SD card. Creating a bootable SD card is easy. Follow the thread which instructs how to make a CWM bootable SD card. You need to choose between the EXT3 or EXT4 version depending on which ROM you will flash. CM7 requires EXT4 version of CWM. If you try to use the wrong CWM version you will get the outcome that you just observed, stuck at android text. If you want to flash the stock 1.1 rom, then you'll need the CWM EXT3 version.
I had the exact same issue. I used this:
The internal CWR workaround is ugly to say the least. So if you NC should refuse to boot or bootloops, which I hope won't, flash this boot repair that I'm adding just in case. Just flash it, no need for formatting.. Use a bootable CWR SD Card.
HCext4-boot-repair flashable zip: http://www.multiupload.com/LN64D4RXEY
6.8 MB
cf963da4043d91d7f4bf8f784cd02d95 HCext4-boot-repair.zip
from the HC v4 on eMMC thread and it solved the issue and I have since flashed just about everything available with success, including dual boot ROMs. I am using a 1gb card.
Calla969 said:
I had the exact same issue. I used this:
The internal CWR workaround is ugly to say the least. So if you NC should refuse to boot or bootloops, which I hope won't, flash this boot repair that I'm adding just in case. Just flash it, no need for formatting.. Use a bootable CWR SD Card.
HCext4-boot-repair flashable zip: http://www.multiupload.com/LN64D4RXEY
6.8 MB
cf963da4043d91d7f4bf8f784cd02d95 HCext4-boot-repair.zip
from the HC v4 on eMMC thread and it solved the issue and I have since flashed just about everything available with success, including dual boot ROMs. I am using a 1gb card.
Click to expand...
Click to collapse
I'll try this and see if I can get it booted. Thanks.
nswenson said:
The nook is never bricked unless it has a hardware failure. One of the great things about the nook is that it has a very early hook in the boot sequence that checks for presence of a bootable SD card. Creating a bootable SD card is easy. Follow the thread which instructs how to make a CWM bootable SD card. You need to choose between the EXT3 or EXT4 version depending on which ROM you will flash. CM7 requires EXT4 version of CWM. If you try to use the wrong CWM version you will get the outcome that you just observed, stuck at android text. If you want to flash the stock 1.1 rom, then you'll need the CWM EXT3 version.
Click to expand...
Click to collapse
That makes things much clearer for me. I knew CM7 required EXT4, but was unaware that the CWM flashed MSD would be properly formatted and couldent be bothered to boot in Linux to do it. Blame lack of sleep. Thanks!
Absolute NooB to the NC here, so please be gentle!
I've got four issues that should be no-brainers but they are beating me up. I've split them into four separate posts to keep things clean.
3. I have CM7 RC4 installed on eMMC (would have preferred to run it from uSDcard but that's another story).
After I got CM7 installed, wireless configured and then gApps installed, I noticed that the uSDcard wasn't mounted. No problem, popped into Setup, Storage and mounted the card.
But this card had been around the block a couple of times, so I figured it would be best to freshen it, partitions and all.
Started ROM Manager and tried to partition the card. But ROM Manager wouldn't partition without installing CWR.
No problem... went ahead and installed CWR, then partitioned the card.
But now I have a problem.
No matter what I do now, I can't boot to CM7 if the uSDcard is installed it boots into CWR. Even if I unmount the card before rebooting, still goes to CWR.
The only way I can get to CM7 now is to physically remove the card, boot, insert the card then mount it manually.
Surely this can't be right.
What have I done wrong?
CWM doesn't work correctly if installed from ROM Manager...
http://forum.xda-developers.com/showthread.php?t=1024616
Sent from my Nexus One using XDA Premium App
Thanks, danger-rat, for the pointer to CWR 3.0.1.0.
Unfortunately, I flashed it and still have the same problem. No matter what I do, boots to CWR if uSDcard is in place.
Format your sd card in your computer. download the attached sdformatter (found it on these forums somewhere) and use it. it will delete any funky partitions on the card. it sounds like that card has cwm on it, and the nook will always boot SD card first.
Please make sure you take the sd card out of your nook, and put it in a card reader to perform this step. not sure if would work right if you tried it in the nook.
I have had to do this a few times to fix cards that have been modified to be bootable on the nook.
Hi,
The Nook Color will try and boot first from an external uSD card. If there is
a bootable image on it, it will boot from it. Unmounting (but not removing)
the uSD before rebooting does not change if the uSD is detected on
rebooting.
From what you say, if you have your external uSD in the slot, you say
you always boot into CWM - I assume this is running on the external uSD.
It sounds like you need to reformat and possibly repartition your uSD to all
fat32. There are several threads discussing restoring a uSD to a single
large partition.
One of them referenced this tool to run on a PC (I haven't used it)
http://www.sdcard.org/consumers/formatter_3/
This will delete the contents of the uSD, so make sure there is nothing
you want on it!
I have been keeping several uSD cards around, one for flashing from time
to time and one for data and backups.
Hope this helps,
Peter
adealey said:
Thanks, danger-rat, for the pointer to CWR 3.0.1.0.
Unfortunately, I flashed it and still have the same problem. No matter what I do, boots to CWR if uSDcard is in place.
Click to expand...
Click to collapse
danger-rat said:
CWM doesn't work correctly if installed from ROM Manager...
Click to expand...
Click to collapse
all you should have to do is flash the cwm zip with the ext4 kernel (cwmr_3.0.1.0.zip) from this thread:
http://forum.xda-developers.com/showthread.php?t=971197
For me all i did was install with Rommanger, then reboot into cwm and installed the zip. works like a charm
I had my 1.1 NC rooted using the GMPower method (there's also the monster rootpack?). I once tried to install CWM from the market but that caused an infinite reboot into recovery. Since then, a lot of things changed and I'm clueless on how to proceed especially with CM7.
I would like to install CM7 but which method is applicable. I found two:
http://forum.xda-developers.com/showthread.php?t=960542&page=16
http://forum.xda-developers.com/showthread.php?t=1000957
My questions are will these work for my 1.1 rooted NC (GMPower method)? What's the difference and which is better? Can the latest CWM be installed onto my NC without causing the infinite reboot?
I appreciate any help.
This link may help: http://forum.xda-developers.com/showthread.php?t=960542&page=16
Second link in your post for installing CM7 on SD card.
I did that, infinite loop. When I install CM from the sd card, it installs fine, but as soon as it reboots, it goes into CM 3.0.0.5 from the internal memory. Should I just wipe /boot?
definitely don't wipe /boot or it won't boot up. So what process are you following exactly? You created a bootable SD card with CM 3.0.10 right? You'll need that for a ext4 system (which CM7 is). That's step #1 in the post nthesame already linked to. Then copy the CM7 .zip (the one for encore final, should be about 90mb) to the SD card and install it using CM recovery (install .zip from location on sd card). If you do this, it will boot into CM7.... make sure to remove your SD card though after installing it, as the default is to boot to SD if it finds any boot files on it.
I used an 8gb image from one of those running 3.0.0.6, not 3.0.0.10, so I'd assume it was good.
It used to be a dual boot, but I removed that and just tried to overwrite stock with no success.
When I tried to install first, I followed the wiki to the tee, nothing.
I just got my nook today, and am about to start the process tonight... but from what i have read so far, your trouble may be that you used CWM 3.0.0.6 vice 3.0.10... seems something was changed to stop the infinate loop...
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
anyone? little help?
jakehalligan said:
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
Click to expand...
Click to collapse
Yep - you can install CM7 by getting the update.zip from teamdouche, copying it to your SD card, booting into CWM and selecting Install update.zip from SD card. This will overwrite your stock with CM7.
sk8house911 said:
Yep - you can install CM7 by getting the update.zip from teamdouche, copying it to your SD card, booting into CWM and selecting Install update.zip from SD card. This will overwrite your stock with CM7.
Click to expand...
Click to collapse
Are you sure of this? If you look at the steps described here: http://forum.xda-developers.com/showthread.php?t=1030227 you have to first prepare your SDCard and then install from that. I tried just installing from cwm in stock root and ended up getting assert errors and aborted installation... and if you wipe the caches like it explains needs to happen, you are stuck booting into cwm untill such time as you follow the instructions in the thread I posted, which work without a hitch if you are able to follow instructions,
migrax
What special preparation? The image being burned to the SD card is just clockwork mod, which isn't necessary if he already has CWM. Once in CWM, that guide just has you flash the CM7 update off the SD card. I don't know about the assert errors, but I don't think it has to do with how you've prepared the SD card.
jakehalligan said:
just purchased nook and flashed to autonooter.
was gonna hold off until the B&N update to see what it brought and didn't want to lose the magazine capabilities but can't wait anymore to go full cm7.
question: since i 'nooted, i already have cwm and the market. do i need to install again, or can i just download cm7 from the teamdouche link to sd card and boot up?
thanks in advance
Click to expand...
Click to collapse
So what are you wanting to do? Boot CM7 off SD card? If so, this:
http://forum.xda-developers.com/showthread.php?t=1000957
Sk8house911 is right. Just make sure you flash the correct cwr from rom manager, which is 3.0.1.0 And make a backup before you do anything.
Sent from my DROID2 using XDA App
If you want to keep the stock B&N reader, you can install CM7 to a SD card per http://forum.xda-developers.com/showthread.php?t=1000957. I did this and also installed a dual-boot menu, http://forum.xda-developers.com/showthread.php?t=962708, and can select either stock on the eMMC or CM7 on the SD card.
I'm quite happy with this arrangement, although I may change things around after the B&N Froyo update arrives.
I use the SD card method to have the nook boot into CM7 and when the SD card is pulled, the nook would be stock to be used by my kids. But I think I messed things up and can't restore. Here is what I have done:
1- I tried to update the stock version to 1.3 manually from B&N website but soon realized I could not. It seems like when in CM7, I had tried to flash CWM recovery (which was not needed and is pretty buggy in SD card method for nook). Now the recovery in emmc appears to be CWM.
2-for some stupid reason when I got into CMM recovery, I formatted boot, system,data and cache (not sure if I did boot also or not). My thinking was to flash a stock image and be fixed. But I am now stuck.
Is there a way to go back to stock on the nook? I am still able to boot into SD card and CM7 nightly. Oh ya, I use Linux Ubuntu not windows. TIA
Sounds like you should get the system back to stock before proceeding any further.
Follow the instruction here: http://www.nookdevs.com/NookColor_UnRooting
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
I did kind of the same thing once. I made an Sd card image with CWM on another sd card -- basically as if you are going to install CM7 to emmc. However, once you get to the point where you would flash Cm7, use the stock zip ROM. It will install that to emmc so it will be back to normal. You should then be good to go.
loveubuntu said:
The problem is that I get into the CWM recovery and not given the reset option following the options on that page. Any idea?
I think my problem is that I'm not really rooted in true sense since I was running off the SD card. Maybe I shoudl root properly, then unroot?
Click to expand...
Click to collapse
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
jerrykur said:
If you follow the instructions you should be left with an unrooted initialized stock Nook Color. Register your account. Then you can wait for the NC to download the 1.3 update, or side load it. Once that is installed you have an unrooted 1.3 stock system.
From there you can try your CM7 card. Don't forget to remove your SD card at the very beginning since like a PC the NC will try to boot off the SD card if it is present.
Click to expand...
Click to collapse
when I follow the instruction, I am not given the factory reset option. I am stuck at the n screen. It flashed the read forever but then stuck at the n screen. Do I have to wait longer than 5 minutes?
None of this is mine, I owe it ALL to the threads mentioned below.
So as in many posts on XDA say, it's almost impossible to brick the Nook. What a great device. I had to format my SD card to use it to "un-brick" my nook but it was done. I Mainly used the info here http://forum.xda-developers.com/showthread.php?t=949699
Burnt a bootable CWM image onto my SD card. It took a while doing it with dd in Linux. I'm sure it's the same in Windows or Mac. It took about 20-30 minutes. It also took a while to unzip/extract the img file from the downloaded file. Be patient
Then used the CWM recovery remover file from http://forum.xda-developers.com/showthread.php?t=914690 to remove my CWM recovery and used the 1.0.1 file from same thread to flash the stock image onto the nook.
Once the SD card is ready, just drop those files in the root of the sd card. It should have 4 other files in it to boot into CWM recovery from the sd card and let you use the menus to flash those two zip files. It took a while but it's all in those threads. Thanks to the members. Now lets see if I can go up to 1.3 and then root it again.
you also need to do this
http://forum.xda-developers.com/showthread.php?t=1094371
and here is the ver 1.2 stock flashable with an clockwork bootable sd card
http://forum.xda-developers.com/showthread.php?t=1050520