Hi, I got a problem with the usb cable...
Tried all usb ports, tried with other computers... nothing helps.
The computer detect the nexus one, no problems.
When I Turn On the usb storage its recognize the SD card, and I can get into the SD, also I can delete files but when I'm trying to copy files (to SD) seems like its start copying the files but then stops and its get out from the usb mass storage mode.
I tried this also:
http://forum.xda-developers.com/showthread.php?t=613217
Also, tried to uninstall the drivers with USBDeview [http://www.nirsoft.net/utils/usb_devices_view.html], and install again with the new drivers...
also reset the computer / nexus one ...
still same problem...
any suggestions ?
The problem might be with the cable ?
I tried it also with at least 4 other PCs, none of them detect the nexus via this usb cable, except of 1 that had the problem above.
I had the same problem as you with CM7, are you using Cm7 or any other custom rom?
If i put the phone in airplane mode the transfer was always succesfull and didn't get out the usb storage mode. Then i disabled it and tried it again and failed sometimes. I noticed that everytime it failed i got a message (notification) so i found out that the problem was in the notification. so when the app is on sd and android wants access to the app it will disable the storage mode en grant access to the sd.
This only happend on custom roms, after flashing stock rom everything was fine again.
If you have the same symptoms as me you can try to transfer a file in airplane mode and maybe, if you on custom rom, try a stock rom.
Hope this will help, goodluck
Thanks for answer mate.
I'm with Geo rom, I tried the Airplane mode but nothing change..anyway, I also tried 2 usb cables of friends who have Galaxy S, and it both works just fine!
Seems like the problem is with the cable, so I order 2 new cables.
Thanks again for the help!
Related
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
mcafee545 said:
Hi, my Touch HD is still under warranty but I'm running Hard SPL 1.56.Olinex.
My USB is not working, it just charges my phone. My SD Card reader is also not working... So I can only connect via BT and I can't find any way of restoring SPL without USB/SD... Is it impossible?
Click to expand...
Click to collapse
Do u try a HARD RESET? If you try a Hard Reset and still have the same Problem you can do some of the things.. tell me witch ROM u use.. maybe the USB problem that don`t wana sync is from the ROM.. also sometimes when you flash a 6.5 ROM the CARD is not visable one FOrmat normaly will clear the things but its bad when you cannot conetc to format via PC
The Best you can do is to flash Another ROM via SD Card but 1st you need to make your SD card working so if you have some SD adapter or some other device that you can take out your SD card from the Phone and conect it directly to the PC will be perfect to FORMAT it.. Once the problem with your CArd is fixed you can just put there some new ROM and Flash the Device...
Its very Bad when on the same time the USB and Card not working but don`t worry you can fix the things but its not so easy.
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
mcafee545 said:
I'm running official HTC Touch HD_MR_2009_RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship.exe... I can connect to PC via BT and copy files...
Click to expand...
Click to collapse
Yes but the NEW Cooocked ROm is around 170MB so you will need few days to copy this via BT also when your SD card not working this is not posible because the ROM file must to be located in the root of the SD card
Now i understand that you use STOCK ROM so the best you can do is to go in HTC service for Warranty i was thinking you have a problem with Coocked ROM but when is with STOCK ROM its not your fault.
The problem is that I've installed Hard Spl... If I take it to HTC they probably are gonna say it's not covered by warranty...
If you use usb to charge your phone than datacommunication with your pc has to work.
Which OS are you running, because when you entering the bootloader your pc doesn't see your phone as a mobile device anymore.
If you're running WMDC and entering the bootloader than Vista or W7 is searching for new drivers..... If not found read this topic http://forum.xda-developers.com/showthread.php?t=524619
For XP you have to install the drivers yourself.
They can also be found in the link.
When the drivers are installed en your phone is synced than it will show USB in bootloader.
After that flash back to stock SPL
Hopefully this is will help you, your problem is very strange
Because of a not workin SD card and a not working USB
I wish you luck!
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
If you update usb drivers there's a good chance that your device will show up on pc. Don't forget to 'enable usb connections' in activesync connections settings
Also if this doesn't work try flashing orginal stock rom which came with your device. This rom, and only this rom, will still flash as long as you are connected to pc (doesn't need to say 'usb' at bottom of bootloader). Alternatively try MTTY
Rick
I had a very similar problem when I last tried andriod. first of all my sd card dropped off, It would go in, be seen and then drop again as soon as I tried to access it. Android had corrupted it. Try reformatting your SD card fat32, copy the rom on and try updating the ROM again using your SD card.
It also busted my pc drivers on my pc, I had to uninstall them completely and then load the latest drivers. If you have another pc try it on this first before faffing with your USB drivers.
Once my sd card was back I couldnt flash any roms, no usb connection. I did a hard reset and then went into spl manually and set it running that didnt seem to work but when my phone rebooted usb was backup.
It seems andriod manager to corrupt my ROM, SD card and uSB drivers on my PC, I havent bothered with Android since and wont until there is a bootable ROM available (never)?
Your USB cable may be bad. Sometimes they stop working and pc communications stops. I've had to replace my usb cables from time to time.
mcafee545 said:
Thx! I'll give it a try tonight... but I don't think that will help because I've hard-reset the device and tried with Windows 7 and Windows XP and nor the phone nor the pc show any message.
I remember that the SD card did show up, but after a few seconds it would disappear... But now it never shows up... Already changed usb options on control panel...
The last thing I did when the SD was ok was trying Android with no luck.
I believe it's really an hardware problem and maybe I could replace the board that has SD/USB/SIM but would like to use my warranty....
Click to expand...
Click to collapse
Last time I had something like this, I had to remove the HD from windows mediaplayer. For some reason it was there as plain "storage card" if I remember correctly. After that I could connect normally with the HD again.
*Have you verified that your SD Card is actually working at all?
*-I've had a problem in the past with an "old" SD Card that wouldn't recognise properly in either my PC or my phone. Turns out all i had to do was clean the contacts on it lightly. My original 8Gb SD Card that came with my Blackstone has also completely died. It will not format, will recognise then drop-off and attempting to use it in ANY manner resulted in it becoming excessively hot - Dead card, not replaceable under warranty
*If the SD Card works in your PC, have you tried formatting it to "Device Defaults" via the PC?
*-This problem has in the past also prohibited me from using my SD Card in my Blackstone. For some devices, without certain registry tweaks enabled, only particular formats of SD Cards are recognised. I have also noticed that the card must be formatted in a particular way to be useable as a ROM Flashing card. The Blackstone simply won't read any images from the card in bootloader mode if the card is formatted improperly.
* Try another USB Cable, being able to charge via USB does NOT mean it WILL sync, for example, if your USB cable has bent/damaged contacts, or if the cable itself has a broken lead, the VCC (voltage core) and GND (ground) leads can still create a circuit to send power to the device which will enable it to charge.
*-Also try other USB ports... you never know when one maybe too dusty / dirty / faulty
* Windows 7 / Vista? Uninstall Window Mobile Device Centre (WMDC) re-download and reinstall, or allow Windows Update to do this for you after you've uninstalled. A simple registry error can fark this right up. I should know, as I recently accidentally imported my Blackstone's registry backup to my laptop... ugh that was a nightmare. Windows 7 recovered, but I spent a few days browsing with the wrong user-agent, meaning a lot of websites were redirecting to their "mobile" or "wap" counterparts...ewwww
* Windows XP? Well I can't say too much there, as I haven't used it pretty much since Vista was released years ago. Just do your best to make sure all drivers are updated appropriately.
other sd card
have you tired a different sd card there are known issues with some types of cards sd vs' sdhc and class 2 vs' class 6 cards. Also you may have a bad usb cable? Do you have .net framework installed. are you trying all this on the same computer you used to flash your phone with hspl. You can try putting your phone into bootloader mode wait for usb to appear on the bottom of the tri-color screen and then reflash stock spl from there by opening the BlackstoneRUUWrapper and going through the steps it should see your phone. See the wiki!
And why did you hspl if you have a stock rom?
I did a sim-unlock and didn't restore the spl after the process... I was waiting for the perfect 6.5 ROM...
I didn't have time to test it yesterday but I brought it with me and will try again later...
I already tested the SD in other Windows Mobile phones and was ok... The SD is not the original (Transcend) but a SanDisk 8GB but already tried it with a 2GB SD and nothing. Also tried with different cables. And in different PCs (windows xp and Windows 7). Also did a hard-reset.
Nothing worked! When I enter bootloader with usb cable connected there is no SERIAL and no USB message, but if I remove the cable it changes to SERIAL and doesn't change anymore. On the PC, with XP, W7 and Ubuntu, nothing happens... lsusb gives nothing... on device manager it doesn't show up.
Regarding the SD card, when I insert it the screen turns on, but still no storage card detected... I really think it's an hardware problem.... I ordered this, just in case, http://cnn.cn/shop/touch-simmicrousb-card-module-p-7149.html, but will still try to take it to warranty before because there is a seal over one of the screws...
Thank you all!
I hope you guys here from XDA can help me solving a question I have about some errors I get when trying to backup the gameloft game's data on my PC and either nandroid backups created on the internal SD of my Galaxy Tab (something that usually happened with my old Galaxy S too).
I try both ways, with the Tab connected to Windows 7 in Mass Storage or Kies mode, but sometimes I get some weird errors (the file transfer stops and the USB connection hangs out, and sometimes, when I insist in trying to copy the file that gave me the error, the file ends up corrupting itself in the internal memory), but after turning the tab off and then on again, I can get the files normally and get no errors.
Does the internal SD memory of Galaxy series get corrupted that easily, the USB connection is poor or what?
The weird part is that this only happens copying files from the internal SD to PC. In the reverse way, I get no errors, so I don't believe it's a dock conector/USB cable problem, since it's a original and new USB cable that don't show any kind of problem when flashing roms, for example. I belive that if it was some kind of dock/usb cable problem I wouldn't be able to flash roms or transfer large files from PC to Tab without the same kind of errors showing up, right?
Did someone here experience the same errors I mentioned?
Thanks!
Nobody?
Have u updated ur Kies software becoz it installs latest USB drivers for ur Tab.
Yes, Kies is updated, but I dont think it matters when using usb mass storage mode...
Rooted tab? Read-write mode enabled?
Yes, rooted, and no read-write enabled for /system.
It just says one of the usb devices connected to this computer has malfunctioned. I have tried reloading drivers. Reflashed ICS onecosmic 4.2 again, Tried another usb cable but all no good! HELP ME PLEASE!! My wifes phone connects no worries. I even tried connecting mine to another computer and that was no good either......
It will charge when connected to computer so thats working but it wont connect
Do you have the nexus drivers installed? as the samsung ones wont work with the ics port.
They are part of the android sdk found here : http://developer.android.com/sdk/win-usb.html (instructions on page on how to install ect , there is also a link to download drivers only here : www.multiupload.com/BUCFT8M42N , but that seems to be down atm.
If Nexus S drivers don't fix it, clean your micro usb port.
I had a similar issue with Windows stating that my connection was malfunctioning. Cleaning the micro usb port with some rubbing alcohol and a micro brush (for cleaning teeth) fixed that problem for me.
Don't forget to take your battery out before cleaning your micro-usb port.
Thanks guys going to give this a go now.
Found another direct download link here : http://androiddrivers.net/samsung-android-drivers/download-nexus-s-drivers/
Thanks guys but no luck. Tried cleaning it but no luck either. I have recalled getting rain on the phone the other day and the usb cover was open! I think this is what has caused it.....Question is can I load new ICS Roms etc onto my external SD via a sd card in computer then transer them onto my internal card to flash? Then I wont have to worry about the usb....
Anyone know the answer
Your recovery doesnt allow flashing from external SD cards? Weird... Otherwise, you should be able to open up internal storage from any (Good) File manager. I use FX and FileXplorer to move files back and forth.
Make sure to move the files to internal sdcard first
jaseandjess said:
Thanks guys but no luck. Tried cleaning it but no luck either. I have recalled getting rain on the phone the other day and the usb cover was open! I think this is what has caused it.....Question is can I load new ICS Roms etc onto my external SD via a sd card in computer then transer them onto my internal card to flash? Then I wont have to worry about the usb....
Click to expand...
Click to collapse
Yes that would just do fine... You shouldn't face any problems in flashing...
Well thanks for your help guys, I ended up flashing 4.0.4 rom on my phone and now its working....I dont know that maybe it dried out and self fixed or it was a rom issue??
Hello guys,
I had CM7 running for a while because of its stability. However, I have used CM9 as well for a long time on my P990. Today, I was planning to revert back to CM9 and connected the phone to the computer but the internal memory nor the memory card shows up in my computer. I tried two different laptops and also reflashed cm7 which was already present in my memory card. Still no luck.
When I connect the phone, I get the bell, alert or whatever you want to call it from windows that it has detected that a usb device has connected. Though nothing shows up in my computer. USB Debugging is switched on. And I also press the notification on the phone which should allow me to transfer files between phone and computer.
Im out of ideas, please help.
Re-install the LG USB drivers, found here in the developers section.
I had the same problem when I flashed my phone and everytime I changed roms, I would have to install the drivers again.
korgndm said:
Re-install the LG USB drivers, found here in the developers section.
I had the same problem when I flashed my phone and everytime I changed roms, I would have to install the drivers again.
Click to expand...
Click to collapse
And if reinstalling the drivers does not help for whatever reason, and if all that you're trying to do is to push the CM9 rom files from your PC to the SD on your phone, then try following the tip from XDA-TV using SSHDroid. It worked well for me.
http://youtu.be/UI70UYug_zQ
The example in the video is with a Ubuntu machine, but you can follow the same steps for using PC with Putty and WinSCP.
And I haven't tried this, but another alternative is using adbwireless available through Play:
https://play.google.com/store/apps/...reless&feature=nav_result#?t=W251bGwsMSwyLDNd
Some time ago I dropped and broke my Samsung Galaxy S, I've since gotten a replacement but there are still some files on the internal SD that I want to recover. I should be able to do this with ADB - but USB debugging doesn't seem to be enabled on device.
I thought entering recovery enables this - but I'm basing this on my cyanogenmod 10 install on my working device, whilst I should have stock 2.3.6 installed on the broken one (this rom specifically).
I believe I have the stock SGS recovery, but I can't say for sure.
Anyone have any clue on what I could do to get usb debugging working either in the OS or in recovery?
depending on what CWM you have installed you can go in mount and storage and there mount USB storage....then it connects the internal SDcard to your pc.
On my windows pc, sometimes the internal sd card mounts to pc only with connecting the phone to it. I am not sure anymore under what circumstances i got this working. Perhaps it was in download mode or in recovery mode....also could be that this was when i only short press the power button when phone is down but USB connected.....and if i remember right it depended also on which driver were installed and that sure kies is not running....but perhaps you give it a try?