Database Develop

USB Tethering in Jupiter

Hi!
Just to let you know that I am enjoying the great Overcome ROM with the Jupiter. And a big thanks for that.
I just noticed that the USB tethering is not enabled?
Just for curiosity 'coz I use mostly the wi-fi hotspot function.
Thanks.

Hmm Care to elaborate? How is it not working. does it break? doesn't show icon? no connectivity at all? explain please

Thanks for replying.
The option for USB tethering is not highlighted, so nothing happens no matter how I press it. And since I usually use the wi-fi hotspot, so I don't mind about that. Until today.
But looks like the problem is with me. I found out that I have to connect the USB cable first to the computer to make that option active.
So here goes. I tried it and it is working fine.
Sorry, but thanks a lot for your time.

I'm following up on this because I just flashed Overcome onto my SGT, and I cannot get USB tethering to work. Its enabled alright, but my laptop says:
Code:
[ 7794.270071] usb 1-1: new high speed USB device using ehci_hcd and address 7
[ 7794.421477] usb 1-1: configuration #1 chosen from 1 choice
[ 7794.424534] scsi5 : SCSI emulation for USB Mass Storage devices
[ 7794.424898] usb-storage: device found at 7
[ 7794.424903] usb-storage: waiting for device to settle before scanning
[ 7794.628170] cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.
[ 7794.628471] cdc_acm 1-1:1.0: ttyACM0: USB ACM device
[ 7794.630002] usbcore: registered new interface driver cdc_acm
[ 7794.630086] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 7796.510942] usb 1-1: USB disconnect, address 7
[ 7796.840074] usb 1-1: new high speed USB device using ehci_hcd and address 8
[ 7796.991560] usb 1-1: configuration #1 chosen from 1 choice
[ 7797.115726] usbcore: registered new interface driver cdc_ether
[ 7797.123220] usb 1-1: bad CDC descriptors
[ 7797.123268] usbcore: registered new interface driver rndis_host
Thanks for any help.
I'm able to use the wifi tethering as a "workaround", but would actually prefer the cable.

What OS (version) do you use?

Mjoelnir77 said:
What OS (version) do you use?
Click to expand...
Click to collapse
Ubuntu 10.04 LTS.
usb tethering works with my LG O1 P500 running CM7 (6.5.7 stable) flawlessly on this laptop.

Seems to be a general problem with Samsung 2.3 firmware!
Browsing other forums, and using Google, it seems as if this problem affects many Samsung galaxy devices which are running Gingerbread based firmware, not just the Tab.
There is a solution floating around which uses wvdial mentioned in this thread, but I have not tried it. There may also be a fix in newer Linux kernel versions, but I haven't tried that either.
Does anybody have USB tethering working on their Tab with Overcome ? If so, please let me know what Linux kernel version you are using.

Cant Connect to PC

hello guys can you help me coz i cant connect my lg optimus 2x to my pc
when i connect my o2x is charging but my pc cant recognize it
i tried reinstalling drivers, change usb cable, change my OS from win7 to xp, flash stock rom ( cant flash because my pc cant recognize my o2x so i cant start flashing), use nvflash (my pc cant detect apx device)

brymarti said:
hello guys can you help me coz i cant connect my lg optimus 2x to my pc
when i connect my o2x is charging but my pc cant recognize it
i tried reinstalling drivers, change usb cable, change my OS from win7 to xp, flash stock rom ( cant flash because my pc cant recognize my o2x so i cant start flashing), use nvflash (my pc cant detect apx device)
Click to expand...
Click to collapse
please dont use any USB hubs...connect it to the USB port on the motherboard side....normally on the rear side for the Desk tops.....on the laptop all ports are directly connected normally...
secondly, what is your config? ROM?Kernel?please state your current configuration which can allow others to understand the situation.
Thanks

yeah i dont use usb hub i connect it directly i tried it on my laptop but its not working
my o2x dont say that usb debugging is connected it only charge
im on stock GB now 2.3.4 v20g

Don't want to hijack this thread, just got the same problem. (Not a complete noob here, rooted lots of different devices)
Bought a used 2x today. Froyo 2.2.2 german stock on it.
It just doesn't show the prompt that USB is connected
Tried:
- LG Mobile Driver from version 2.x.x up to 3.7.2
- on Win7 32 bit, Win7 64bit, Win XP 32 bit on various USB ports
- LG PC Suite obviously doesn't connect too
- checked/unchecked USB debugging, USB mass storage and all the obvious settings
- tried different cables
Would be really great if someone experienced could point us in the right direction.
EDIT:
After lots and lots of google I found out about a menu when dialing: 1809#*990#
With these options available:
CP Image Download
FET Disable
FET Enable
AP UART
CP UART
AP USB
CP USB
CP UART gave me at least a life sign once by saying that Windows wasn't able to recognize the device.
Is this issue really unsolvable?

Sorry for the bump, but I got some update.
when dialing the above mentioned 1809#*990# in the Port menu, switching from default AP USB to AP/CP UART gave me life signs.
After switching to AP UART I linked the Unknown device driver to lgusbdiag.inf located in C:/ProgramFiles(x86)/LG United Mobile Driver.
Suddenly it started installing it and is now recognized as: LGE Platform Android USB Device.
Once disconnected I lose USB again, I'm able to recreate the first steps though even in default AP USB mode by now.
The only thing I need USB for is for flashing a custom recovery but the only thing I don't have is ADB somehow : / Clockwork telling me: device not found.
Any help on this one?

any idea guys about my problem?

Have you tried my method?
After manually installing drivers with CP UART on, switching back to default permanently enabled access with default AP USB settings as well.

i tried that but it only charge
theres a weird thing in my cp when i switch to cp uart my o2x says it charging even i dont connect it to my pc or charge it

Ap uart - p990 / p999
I have LG P999. rooted and cyanogen.
None of the special DTMF dialing # codes is not working (also code changed from 990 to 999) (i sow some other in another posts)
is anybody know a way to change to AP UART by software (with eclipse...)
or with a special cable?
i need to use AP UART - meaning to have a serial com in AP(app).
Thanks,
Tamir

guys,
Have you tried to install MyPhone Explorer and try the same....it can connect your device via wifi,USB or Bluetooth....so some way should work....
any Android version above Froyo(included) should work....I use this always...one of very useful and bug free apps.
Try it

[Q] can someone tell me how to connect my phone to linux.. Kubuntu 12.04

since i updated to JB i seem to have lost the USB connection..
i dont see a way to hook my phone to the computer and see the files as a drive?
anyone?

aarons6 said:
since i updated to JB i seem to have lost the USB connection..
i dont see a way to hook my phone to the computer and see the files as a drive?
anyone?
Click to expand...
Click to collapse
On mine, set the phone as a camera and it worked. (12.04)

its not working no matter how i connect it.. with mtp i see a device but it has only the motoroladevicemanagersetup.exe in it

aarons6 said:
its not working no matter how i connect it.. with mtp i see a device but it has only the motoroladevicemanagersetup.exe in it
Click to expand...
Click to collapse
Ubuntu 12.04 here
phone is on, I connect the usb wire
- it connect as a media device (MTP)
- open the upper status bar to see the usb notification
- you touch the notification to open it.
- you chose Camera (PTP)
- and there, you have both "drive" mounted in file manager.
you're welcome.

yeah but its not working. it mounts the phone as camera: and there is 2 folders..
mass storage camera and usb ptp class camera
both empty
trying to connect it with mtp-tools i get this
libmtp version: 1.1.3
Listing raw device(s)
Device 0 (VID=22b8 and PID=2e33) is UNKNOWN.
Please report this VID/PID and the device model to the libmtp development team
Found 1 device(s):
22b8:2e33 @ bus 1, dev 56
Attempting to connect device(s)
PTP_ERROR_IO: failed to open session, trying again after resetting USB interface
LIBMTP libusb: Attempt to reset device
inep: usb_get_endpoint_status(): No such device
outep: usb_get_endpoint_status(): No such device
usb_clear_halt() on IN endpoint: No such device
usb_clear_halt() on OUT endpoint: No such device
usb_clear_halt() on INTERRUPT endpoint: No such device
usb_open(): No such device
LIBMTP PANIC: Could not init USB on second attempt
Unable to open raw device 0
OK.

aarons6 said:
yeah but its not working. it mounts the phone as camera: and there is 2 folders..
mass storage camera and usb ptp class camera
Click to expand...
Click to collapse
well, on my stock ubuntu 12.04 LTS and my Atrix HD rooted on ICS then updated to JB (and not rerooted),
when I switch to camera, I get 2 mounted drives, one with the external SD and one with the internal memory.
Using the stock file manager under ubuntu.

[Q] Kindle fire HD 7" not recognised as an MTP device anymore

I have a Kinde fire HD 7" that I rooted for a neighbours son which he managed to brick within 20 Mins of getting it back, I think the battery died on him when he was installing something. Now when I plug the Kindle into my system which runs Linux I get the following in the logs.
Feb 13 15:01:05 kernel: [ 161.419037] usb 1-5: new high speed USB device using ehci_hcd and address 5
Feb 13 15:01:05 kernel: [ 161.533760] usb 1-5: New USB device found, idVendor=0451, idProduct=d010
Feb 13 15:01:05 kernel: [ 161.533767] usb 1-5: New USB device strings: Mfr=33, Product=37, SerialNumber=0
Feb 13 15:01:05 kernel: [ 161.533772] usb 1-5: Product: OMAP4440
Feb 13 15:01:05 kernel: [ 161.533775] usb 1-5: Manufacturer: Texas Instruments
Feb 13 15:01:05 mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5"
Feb 13 15:01:05 mtp-probe: bus: 1, device: 5 was not an MTP device
Feb 13 15:01:08 kernel: [ 164.534204] usb 1-5: USB disconnect, address 5
Feb 13 15:01:08 kernel: [ 165.305041] usb 1-5: new high speed USB device using ehci_hcd and address 6
Feb 13 15:01:09 kernel: [ 165.419856] usb 1-5: New USB device found, idVendor=0451, idProduct=d010
Feb 13 15:01:09 kernel: [ 165.419863] usb 1-5: New USB device strings: Mfr=33, Product=37, SerialNumber=0
Feb 13 15:01:09 kernel: [ 165.419868] usb 1-5: Product: OMAP4440
Feb 13 15:01:09 kernel: [ 165.419871] usb 1-5: Manufacturer: Texas Instruments
Feb 13 15:01:09 mtp-probe: checking bus 1, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-5"
Feb 13 15:01:09 mtp-probe: bus: 1, device: 6 was not an MTP device
Feb 13 15:01:12 kernel: [ 168.420300] usb 1-5: USB disconnect, address 6`
Click to expand...
Click to collapse
This repeats ad infinitum, well at least 30 times I unplugged it after that.
My question is this, will I be able to to restore the Kindle using the Factory cable from SkOrPn or is this a case where I need to send it back to Amazon ??
Any help would be much appreciated.

JBDegriz said:
I have a Kinde fire HD 7" that I rooted for a neighbours son which he managed to brick within 20 Mins of getting it back, I think the battery died on him when he was installing something. Now when I plug the Kindle into my system which runs Linux I get the following in the logs.
This repeats ad infinitum, well at least 30 times I unplugged it after that.
My question is this, will I be able to to restore the Kindle using the Factory cable from SkOrPn or is this a case where I need to send it back to Amazon ??
Any help would be much appreciated.
Click to expand...
Click to collapse
Is the device still able to comunicate with ADB? If it can then you do not need a fastboot cable. If it does not then yes you will need one to restore it..

lacoursiere18 said:
Is the device still able to comunicate with ADB? If it can then you do not need a fastboot cable. If it does not then yes you will need one to restore it..
Click to expand...
Click to collapse
No ADB never sees the device any more as the USB just keeps reconnecting and disconnecting. The same thing happens in windows where I keep getting the sound when you connect a usb device over and over again and windows looks for a device driver for an OMAP4440, which I believe is the CPU in the Kindle.
So I need to know that in a situation like this that the Factory cable would actually help, I'm sure I read somewhere that fastboot mode needs a working bootloader and I'm not sure that this kindles bootloader is still there.
Thanks

JBDegriz said:
No ADB never sees the device any more as the USB just keeps reconnecting and disconnecting. The same thing happens in windows where I keep getting the sound when you connect a usb device over and over again and windows looks for a device driver for an OMAP4440, which I believe is the CPU in the Kindle.
So I need to know that in a situation like this that the Factory cable would actually help, I'm sure I read somewhere that fastboot mode needs a working bootloader and I'm not sure that this kindles bootloader is still there.
Thanks
Click to expand...
Click to collapse
Yea it doesn't sound like it's in working order, so yes, a fastboot cable would be need to get the device back in action..

Hi, I have the same problem, did you manage to cure it with the skorn cable, I am asking because I have made a factory cable myself but its giving the same problem.
lacoursiere18 said:
Yea it doesn't sound like it's in working order, so yes, a fastboot cable would be need to get the device back in action..
Click to expand...
Click to collapse

devilxmax said:
Hi, I have the same problem, did you manage to cure it with the skorn cable, I am asking because I have made a factory cable myself but its giving the same problem.
Click to expand...
Click to collapse
No I'm afraid not. If your device is being recognised as an OMAP4440 then your out of luck as there are no drivers for this yet. I had to send my device back to Amazon who replaced it no questions asked.
A good thread to check is http://forum.xda-developers.com/showthread.php?t=2096888 post a few details of your problem on that thread and you will get a helpful response.
Good luck

[Q] Broken HTC First - Any way to fix it?

Hello,
right next to me I have an HTC First which seems broken. It's my father's phone, and he is terrible at really telling what happened, so I will spare you the details, except that he was - the last time the device actually worked - maybe downloading some navigation app from a website (http://www.viamichelin.de/).
The First doesn't turn on any more, when you connect a charging or a usb cable, all that happens is that the home + the menu button shortly light up. The screen is most likely not cracked, it seems all in all perfectly fine.
Linux tells me the following about the HTC First as an USB device:
Code:
$ lsusb
Bus 004 Device 009: ID 05c6:9008 Qualcomm, Inc. Gobi Wireless Modem (QDL mode)
$ dmesg
[ 4099.008909] usb 4-1.4: new high-speed USB device number 7 using ehci-pci
[ 4099.094091] qcserial 4-1.4:1.0: Qualcomm USB modem converter detected
[ 4099.094249] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 4372.398567] usb 4-1.4: USB disconnect, device number 7
[ 4372.398780] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 4372.398804] qcserial 4-1.4:1.0: device disconnected
[ 4375.398363] usb 4-1.4: new high-speed USB device number 8 using ehci-pci
[ 4375.521723] hid-generic 0003:05C6:F006.0009: hiddev0,hidraw6: USB HID v1.11 Device [HID 05c6:f006] on usb-0000:00:1d.0-1.4/input0
[ 4379.820165] usb 4-1.4: USB disconnect, device number 8
[ 4380.006727] usb 4-1.4: new high-speed USB device number 9 using ehci-pci
[ 4380.091837] qcserial 4-1.4:1.0: Qualcomm USB modem converter detected
[ 4380.091977] usb 4-1.4: Qualcomm USB modem converter now attached to ttyUSB0
So what do you think? Any suggestions on how I could probably fix this device?
Thank you very much in advance,
Peter

maybe try to flash it back to stock rom via RUU

hlp me friends
same problem ...please tell me how to flash my htc first....plz hlep me

restoring to stock
first of all you must know that this will wipe everything from your phone,so make a backup of personal data... you will need to download the RUU package which has the original stock firmware from this link:
http://www.androidruu.com/?developer=Myst
download this one because this can be s-off: RUU_MYST_UL_Cingular_US_1.08.502.1_Radio_1.15.40.0 0.13_2_10.64.40.33AL_release_316579_signed_2.exe
do you have installed the drivers and is your bootloader unlocked from htc dev?
of course it must be unlocked
1-reboot into bootloader
2-open cmd and type: fastboot oem lock
this will relock your bootloader so you can proceed to install the RUU (if you dont know fastboot comands ask me to send you the files and give you further instructions)
3-now its time to grab the rom.zip from RUU. run the file which you downloaded and i will tell you 2 ways to get the rom.zip
*the first one is to find it to temporary files,pres the windows key + R and type %temp% and there are to many folders,but in one of them you will find it
*the second one is from task manager,open RUU.exe and open taske manager (ctrl+shift+esc),go to applications,right click on ruu ,click on go to process,it will direct you to sth highlighted and again right click on it,click on open file location and here you are at the folder where is located rom.zip . copy it at the folder where you have fastboot.exe and close the RUU application
4-now is time to install the rom.zip,type in cmd:
fastboot oem rebootRUU
(the screen must show htc logo and a dark background)
5- the final step is flashing zip,type again in cmd:
fastboot flash zip rom.zip
(the cmd will show some automated scripts and after a couple of minutes your phone will be completly reverted to stock)
6-if you want to s-off and install a custom rom,first head up to htcdev.com to unlock your bootloader,download moonshine s-off for htc first and it will s-off your htc and root it,install a custom recovery and choose your favorite rom)
Sorry for my bad english,but im trying to do my best !
For any problem contact me !
If i helped you,press the thanks button

wifi problem
Dear,
I have htc first & im face wifi problem after connecting data connecting from sim.
Please resolved if possible.
Thanx & regrds
Kamran siddiqui