How to connect to PC by USB or BT? - LG Optimus 2x

I've got my LGOS today and need a sync with Outlook. There are 3rd-party tools as MyPhoneExplorer, but they need a connection.
If I connect by USB or BT MS Vista starts to search for the driver but cannot find one. There it ends without connecting. What to do to get a connection?
Thanks!

Related

Bluetooth Internet Connection

Anyone can help me to use bluetooth and internet with my desktop pc?
TYVM
Are you talking about using your TyTN II as a modem to connect to the internet through your PC?
If so, is your PC running XP or Vista? And is it wirelessly enabled or do you need a bluetooth dongle for your PC to recognise othe bluetooth devices?
Nopes, i mean in the past in my old palm tx with a bluetooth adaptor plug to my pc i use internet with a pan connection i think, that can be done with the tytn II?
To use device to connect : Just turn on Internet Connection SHaring on your device (selecting BT) and then connect to it as a BTPAN on pc
To use pc to shre web with device, just connect activesync over BT and the device can then use the pc's web connection.
Hi, where can i find "internet conection sharing"
using wm6
its internet sharing and you can find it on programs menu

Connecting ActiveSync to MobileCenter via Bluetooth.

Does any one have a link that shows how can I ActiveSync to Vista's Mobile center , via BlueTooth. The Kaiser can see the notebook via bluetooth but does not recognise that it is cappable of ActiveSyncing.
This is how I Activesync most of the time.
When you open Activesync on your Kaiser, there should be an option on the Menu to connect via bluetooth.
It normally configures the port etc automatically.

Big problem with Activesync by Bluetooth

I have a problem trying to connect to ActiveSync by bluetooth .
When I pair diamond to PC not appear the service "ActiveSync", but "Serial Port".
Therefore ActiveSync, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me
I had this problem.
You have to pair the PC to the Diamond. ie search for the device on your PC then pair. (Unpair the origonal setup first)
Hope this helps
I had this problem. Until I activated Bluetooth PAN (networking) on my desktop PC. After this "Active Sync" was available when pairing the device.
The issue have been resloved,I modify the Register, change serial port to ActiveSync
Sorry if this has already been answered I have been searching the forums to no avail.
Has anyone come up with a programme that will connect to activesync when in bluetooth proximity without having to click on the "connect via bluetooth" similar to the way Nokia phones can ?

Using the td2 for an internet connection for a laptop

I'm trying to set my laptop up to use the td2 to get a connection to the internet. can this be done either via bluetooth wiFi or USB. I have tried to add a bluetooth network connection but the laptop keeps giving an error saying could not connect to the remote device.
When I plug mine into my laptop via USB, I get an option on the device to 'internet share'. Does this not happen for you? I'm not sure whether Windows Mobile Device Center is also needed, but it may be!
I did this today using a Macbook. The USB did not work on the Mac but Bluetooth did. I had to connect to the phone from the computer using ordinary bluetooth first (without network). Then I had to choose Internet Connection on the phone using Bluetooth PAN - which I assume is Bluetooth network. Also had to select Bluetooth PAN on Macbook - was a bit fiddly but it worked. Anyway it does work with USB on the PC see post 16 of the thread here.
cheers both, i will check out the other thread but when I connect the phone via USB to this (work) laptop, I get nothing. My home one uses Vista and Mobile Device Centre, but my work one uses XP.
typically, after a reboot the phone gives of the option to shart internet sharing but the laptop wants to install a rndis connection, but the only way to do this is connect to internet. ironic.
Ok, finally have a proper Interenet connection and downloaded Activesync 4.5 from MS. This looks like it will resolve the situation.

Bluetooth

Hi,
I just bought a Bluetooth dongle for my PC. (Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M)
The main reasons for buying this was so I could sync without using one of my very spare USB ports.
Another big reason was that I really want to try SideShow.
So, I hooked the thing up, installed it. Works like a charm for most services (files etc). It just doesn't work for two things: ActiveSync (on the phone)/Windows Device Center (on my PC) and Windows SideShow. Yay.
Could you please help me out?
To summarize:
PC with Vista Home Premium,
Trust Ultra Small Bluetooth 2.1 Usb Adapter 25 M,
HTC S730.
Not working for ActiveSync nor SideShow.
x5x_tim
PS: I installed something called "X86-PC Drivers.cab" I found in some thread. That's supposed to be the drivers for the SideShow service on the PC. (I think I installed them, I did not get an error from Rundll32...)
EDIT: what might be of use: I can't get the devices to pair if I use the PC to initiate that. The PC does not find the phone untill I pair them using to phone to initiate.
I don't know about SideShow but I managed once to ActiveSync my Wings through Bluetooth. Just be sure to remove any security restricition on your Bluetooth settings on your device. Like Secure Connection etc... Also, setup a serial port when you connect with your PC and then, at PC ActiveSync settings, at connection settings -> Allow Connections To One Of The Following (Com 4 or whatever). And then, at ActiveSync on your mobile, connect through Bluetooth. Try it and come again if it doesn't work.
Yes! Thank you. It's syncing as I type. That COM4 did the trick!
In the same way, you can have Internet on your mobile through Bluetooth's activesync connection. It is helpful if you don't have wifi on your mobile.

Categories

Resources