Related
I just installed update 1.1, then tried to use autonooter, I didn't actually get anywhere using autonooter(The nook wouldn't even turn on?), so I took the SD card out, now I'm stuck at the screen where it shows the nook N, and "contains reader mobile technology by Adobe Systems Inc." at the bottom..
Any help?:/
8 times reboot? CWR for restoring the stock rom? CWR for flashing froyo? There are many options. I did all of them before for fun.
Sent from my PC36100 using XDA App
Here's a couple options for ya'.
Nook Color Restore to stock
Flash back to clean stock ROM
On the plus side, it's almost impossible to brick a nook color, so one of these should work for ya'. Best of luck to you, mate.
~Q
Okay, I got it to boot up again with the 8times reset, and did the power+n.
But for some reason, now it won't let me re-register it? I get an error, and it tells me to reboot.
Anyway, can anyone tell me how to update to 1.01? The B&N site only has a download for update 1.1... I think that's where I went wrong.
Thanks a lot, guys
Fallen41 said:
Okay, I got it to boot up again with the 8times reset, and did the power+n.
But for some reason, now it won't let me re-register it? I get an error, and it tells me to reboot.
Anyway, can anyone tell me how to update to 1.01? The B&N site only has a download for update 1.1... I think that's where I went wrong.
Thanks a lot, guys
Click to expand...
Click to collapse
Go ahead and boot it up, then go in to Settings -> Device Info -> Erase & Deregister Device. Let it do it's thing, and after the reboot, you should be at 1.0.0. Go and head and register your device now. =)
After you're all re-registered, head over to here, download the update, then just skip down to "Installing the update" since you'll already be on stock.
Enjoy! =)
~Q
Thank you very much, trying it right now!
I love how helpful the community is. I really want to use autonooter to get android on my nook. I just hate that there wasn't really clear instructions written for people who are noobs at this.
I have another question, if I'm just going to use it as a tablet, do I need to register it with B&N before I use autonooter? I don't plan on using it to actually buy any B&N books, and I'm having trouble regestering it.
Glad to help, bud. =)
If you plan on doing some really advanced stuff like moving Nookie Froyo to take the place of the stock ROM on the eMMC, you really don't need to register. However, if you plan on just using ROMs off the sdcard and keeping the stock ROM on the nook itself (like I do), you probably still want to go ahead and re-register just in case. But, if you just can't get the little fekker to register, don't worry about it. It won't hurt anything.
I suggest you to try out froyo on SD card first see if you like it. When you have time, do read about the cwr in the development forum. It is very easy to flash different rom to NC by using cwr.
Sent from my PC36100 using XDA App
I have searched this site for a few days trying to find some sort of answer...okay well an answer i can understand. but perhaps my n00banism is getting in the way. I've broken my nookcolor but it's not broken. yep. exactly. Here is my story:
I was able to root my nook thanks to theunlockr.com. I followed those directions and was able to get a nightly of cm7 (which i ran on my device for 3 months or so). when i tried to update to the stable version I kept getting an error message that the file was bad...i forget the exact wording. SOOO enter me, and my awesomeness. I found tipstir.the-talk.net and an option to load honeycomb on my nookcolor (which seems to be running fine btw). Somehow during that my clockwordmod rom manager was missing. I hadn't yet loaded the gap pack so i went online to the android market and downloaded it. yay. I tried to 'reboot into recovery' to load or 'flash'...but it just reboots normally.
I have since found that the kindle app and aldiko (which is the only app i've found that will read my old sony ereader books) just wont run on honeycomb which makes it all but useless to me since i use this primarily as an ereader.
I dont know what to do to fix the situation that i've found myself in. I think i read somewhere that you can load cm7 on an sd card and run it...but how then would I fix the situation that i've gotten myself into?
yhea...i have just enough interest in these sort of things to get myself in trouble, but not enough practical knowledge to get myself out of the pickles. SO please help the lame and powerless!
Thanks so much
Mikaela
The most surefire fix is to make a cwm card, flash back to your stock firmware, then either use cm7 on the card or install it on your nook(emmc). Basically, treat it like you bricked it. There are quite a few threads that can tell you step by step how to do it.
Sent from my NookColor using XDA Premium App
Edit : go to the stickies tab and look, there's a thread with all the info you need
Have you tried to download Rom manager, and then download clockworkmod from within clockworkmod. Then reboot into recovery from Rom manager. Probally, just trying to help.
Sent from my Optimized Shift using XDA App
fix!
I went back to theunlockr.com and reset back to factory settings and essentially re-rooted the device from there. =) i dont know why i didn't think of that in the first place but *someone* pointed that option out to me. thanks for the help!
NookColor Version 1.2
About 2ish months ago I bought a nook color for my significant other, but I was having problems getting sideloaded books to work right on it so I decided to try and root it. I'm not extremely tech savvy, but can usually do something like this if I have directions.I rooted with manualnooter-4-6-16 The root went well and it was working fine for a couple days until dummy me started messing with it, don't know what it was that "bricked" it but I had updated the flash player then was in the rom manager and hit the backup button. The keyboard was acting funny so I rebooted it, it got to the screen that says Nook Color with the little android dude in the bottom right (nook color devs) and that screen just kept replaying itself except it would stop at the first O in Color and start over. I tried doing some research and followed a couple tutorials on how to return the nook to stock, none has been successful. The first one I followed was video tutorial on youtube to return it to stock 1.0.1, when it asked me to format the data I got and error format data failed..I just skipped that step and moved on. It booted and still showed me the nook color devs screen and once it completely booted showed a "How do you want to finish this action?" With only Home and Softkeys as a choice, I hit home and all it was was a black screen with a bunch of errors. so I tried a different tutorial, the next one I tried was to return it to 1.2 I followed the instructions, it again gave me a error cannot format data, I ignored it..it booted to the nook devs screen and just kept playing over again. I'm lost on what to do, I've searched and searched.
If it matters I've been using a 16gb micro sd because thats all I have, and was using the 2gb clockwork recovery image. I just want it returned to stock, and can't for the life of me figure out how.
Please someone explain to me in the most dumbed down way how to fix this darned thing.
Don't know how serious "brick" it was on your definition but let say on scale of 10, yr NC is bricked level 9 . Still, no need to panic
1. Get the uSD card (2GB is enough)
2. make it flashable with CwM Recovery (ClockworkMod Recovery) either v3.0.2.8 or v3.2.0.1
3. hunt for "re-partition/re-format" thread, read through. I'll update the link if I find it, can't remember where on top of my head now.
4. perform the repartition/reformat back to original v1.2 NOOK
5. hunt for "restore to NOOK for v1.2". Again, I'll update the link later
6. flash it
7. keep all your fingers crossed
Will try that, thank you..Hope it works..seriously cant afford to spend another 250 dollars to replace it
Edit: Fixed The 8 interrupted boots seemed to have fixed it, thanks for your help!
Scintie said:
Will try that, thank you..Hope it works..seriously cant afford to spend another 250 dollars to replace it
Edit: Fixed The 8 interrupted boots seemed to have fixed it, thanks for your help!
Click to expand...
Click to collapse
Glad to hear that!!!!
Hi everyone!
I am very new to rooting and this website. I have rooted my NC using a You Tube Video to go by. I have rooted doing the CM7 and also rooted using just the autonooter.
I like the autonooter version best because I have access to the market, plus the orginial B and N sites. Now, comes the 1.3 update. I love People magazine, and as of now, everyone is saying that is the only way I can get it. Has anyone come up with how to use the autonooter with the 1.3 update??
Thanks!!
No one has any answers?
Rhonda19 said:
No one has any answers?
Click to expand...
Click to collapse
Um...not to be rude, but have you bothered to look much? There's a whole (active) thread right here on the general board about this, not to mention the updated manual nooter thread in the development board.
For your information I have "bothered to look" .. I had some other questions, but I will look for my answers elsewhere!......Not to be rude
I was able to root my wife's Nook Color 1.3 using Manualnooter 4.6.16. Look for the Manualnooter instructions in the Nook Color Android Development section. Since the Nook Color had never been rooted, I just burned a CWM image to an SD card and installed Manualnooter 4.6.16 per the instructions. I ran the Fix Permissions from ROM Manager as suggested. I did have some issues with the New Market not showing all the apps that will run on the Nook Color but there are suggested fixes shown in other posts.
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Rhonda19 said:
I had some other questions, but I will look for my answers elsewhere!
Click to expand...
Click to collapse
If you had other questions, then ask them. The one you asked was answered without even needing to search.
hikersc said:
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Click to expand...
Click to collapse
The manual nooter instructions are pretty much as good as it gets. The market not fully working is more a function of the market than it is rooting the nook.
hikersc said:
I was able to root my wife's Nook Color 1.3 using Manualnooter 4.6.16. Look for the Manualnooter instructions in the Nook Color Android Development section. Since the Nook Color had never been rooted, I just burned a CWM image to an SD card and installed Manualnooter 4.6.16 per the instructions. I ran the Fix Permissions from ROM Manager as suggested. I did have some issues with the New Market not showing all the apps that will run on the Nook Color but there are suggested fixes shown in other posts.
It would be great is someone would post some information (directions) specific to rooting a stock 1.3 with a Manualnooter file with a fully working market but I have not see that.
Click to expand...
Click to collapse
Thank you for your response! I appreciate it. Can your wife still download the People magazine??
Rhonda19 said:
Thank you for your response! I appreciate it. Can your wife still download the People magazine??
Click to expand...
Click to collapse
The "Shopping" feature is working on her rooted 1.3 so I People Magazine should download just fine.
By the way, the repair to the Android Market for me involved the process where you force close the Market and clear cache, then force close Google Framework Services and clear data, then reboot. There are other tablets besides the Nook for which this process works. As a side note, the LCD density change and Market rollback did not work for me as it has for some of the CM7 users.
Let me know how things work out as I have a rooted 1.1 (B&N Updates are blocked) that I would like to get back to a stock 1.3 and then root. On my rooted 1.1 the "Shopping" feature is broken.
I did it!!!!!!!!!!!!!!!!! I followed the instructions on here for the manual nooter for the 1.3 update. I followed them " TO THE LETTER" ! and after a few min...and some nail biting (LOL) everything rebooted just fine! Now, it did say that my install had failed before it rebooted and I was still connected to my laptop.
At that point, I decided to just cut my losses, wipe and return to stock. but then it rebooted again, and this time I had the market and I could open my People magazine!!
So far I haven't had to do any "fixing" on it!
Hikersc.... I do recommend it!!
Rhonda19 said:
I did it!!!!!!!!!!!!!!!!! I followed the instructions on here for the manual nooter for the 1.3 update. I followed them " TO THE LETTER" ! and after a few min...and some nail biting (LOL) everything rebooted just fine! Now, it did say that my install had failed before it rebooted and I was still connected to my laptop.
At that point, I decided to just cut my losses, wipe and return to stock. but then it rebooted again, and this time I had the market and I could open my People magazine!!
So far I haven't had to do any "fixing" on it!
Hikersc.... I do recommend it!!
Click to expand...
Click to collapse
I am still have Market issues with the new Market not showing apps such as Facebook for Androind and Angry Birds (the original). I have tried several fixes but nothing is working. Does your market show these apps?
hikersc said:
I am still have Market issues with the new Market not showing apps such as Facebook for Androind and Angry Birds (the original). I have tried several fixes but nothing is working. Does your market show these apps?
Click to expand...
Click to collapse
No, it doesn't show FB yet and I don't like Angry Birds so I've not installed that one. It is showing the other apps I have downloaded. If you would like I can try downloading Angry Birds just to see if it will show.
There is one problem I am having that I don't like. I don't have a back button, so I have to hit the U button at the bottom, the touch Zeam Launcher to go back to home screen and then start over. I may play around with it today, since it's raining!!
Rhonda19 said:
No, it doesn't show FB yet and I don't like Angry Birds so I've not installed that one. It is showing the other apps I have downloaded. If you would like I can try downloading Angry Birds just to see if it will show.
There is one problem I am having that I don't like. I don't have a back button, so I have to hit the U button at the bottom, the touch Zeam Launcher to go back to home screen and then start over. I may play around with it today, since it's raining!!
Click to expand...
Click to collapse
If FB is not showing in the Market then it is the same as mine (or my wife's). It is not a big deal as you can always sideload these type apps. Crazy Snowboard is one of my favorites and did not show on my 1.1 rooted so I had to sideload.
You need to use Soft Keys for your back button if no back button is showing (mostly B&N apps) at the bottom. Once you run soft keys, the little soft key icon will bring up a "soft key menu" that will home, menu, back, etc. Give it a shot and see if that works for you.
hikersc said:
If FB is not showing in the Market then it is the same as mine (or my wife's). It is not a big deal as you can always sideload these type apps. Crazy Snowboard is one of my favorites and did not show on my 1.1 rooted so I had to sideload.
You need to use Soft Keys for your back button if no back button is showing (mostly B&N apps) at the bottom. Once you run soft keys, the little soft key icon will bring up a "soft key menu" that will home, menu, back, etc. Give it a shot and see if that works for you.
Click to expand...
Click to collapse
You won't believe what happened! I had been reading this morning, and turned it off afterwards. When I turned it back on, it stuck at the "Nook Color" set up menu. That's the first time I have ever had a root to go bad. I've had them to "not take before" but for something to happen like that?? So I had to unroot, set it back up from the beginning, and now have side loaded the 1.3 update. If I try the root again, I will do it just as the directions are typed!! (LOL)
Everything was working fine, I just don't know what happened??
Wish I knew what to tell you folks...I just went back and shut down my nook and restarted it. It always sorta seems like it takes an uncomfortably long time at the color flashing animation, but it went through just fine. What I did initially was exactly what I documented in my other thread...
Rhonda19 said:
You won't believe what happened! I had been reading this morning, and turned it off afterwards. When I turned it back on, it stuck at the "Nook Color" set up menu. That's the first time I have ever had a root to go bad. I've had them to "not take before" but for something to happen like that?? So I had to unroot, set it back up from the beginning, and now have side loaded the 1.3 update. If I try the root again, I will do it just as the directions are typed!! (LOL)
Everything was working fine, I just don't know what happened??
Click to expand...
Click to collapse
Is CWM on emmc or the SD card? I avoid CWM on emmc and also don't use ROM manager.
fpga_guy said:
Is CWM on emmc or the SD card? I avoid CWM on emmc and also don't use ROM manager.
Click to expand...
Click to collapse
I'm not sure. (LOL) I made a bootable CWM on an SD card. Then loaded the manual nooter on it.
I rooted it over again.. Putting it back to stock version, then side loading the 1.3 update, and then running the 4-5-18. and I ran the Fix Permissions.
What may be going on is I didn't load the 4-6-16a either time, and that may be the entire problem. If something happens to it this time, I'll just leave it at the 1.3 and wait until something else comes up.
---------- Post added at 03:11 AM ---------- Previous post was at 02:57 AM ----------
It happened again! I cut it off, and then cut it back on later, and it stuck at the boot. Guess, I'll just have to unroot.....
Rhonda19 said:
I'm not sure. (LOL) I made a bootable CWM on an SD card. Then loaded the manual nooter on it.
I rooted it over again.. Putting it back to stock version, then side loading the 1.3 update, and then running the 4-5-18. and I ran the Fix Permissions.
What may be going on is I didn't load the 4-6-16a either time, and that may be the entire problem. If something happens to it this time, I'll just leave it at the 1.3 and wait until something else comes up.
---------- Post added at 03:11 AM ---------- Previous post was at 02:57 AM ----------
It happened again! I cut it off, and then cut it back on later, and it stuck at the boot. Guess, I'll just have to unroot.....
Click to expand...
Click to collapse
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
doncaruana said:
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
Click to expand...
Click to collapse
This is what I did except I used 4.6.16a (I also loaded a 1.3 kernal and ran the "Fix Permissions" from ROM Manager). All is well for me except the Market does not show FB and others. I was hoping a fix for the Market was forthcoming as the various fixes used with CM7 Market did nothing for me.
doncaruana said:
If you are going back to stock, then simply apply the B&N 1.3 update like they say on their website (put it on the nook via usb, then unplug the cable, it will apply when it goes dark).
After it's done, don't bother with 4.5.18 - just go straight to 6.16. That's what I did and it should work fine. It seems that 5.18 is only necessary if you are going from rooted 1.2 to 1.3.
See how that works for you...
Click to expand...
Click to collapse
"Doncaruana" ... I finally got it rooted, I think!! (LOL) thanks for all your help!! I appreciate it!
Rhonda19 said:
"Doncaruana" ... I finally got it rooted, I think!! (LOL) thanks for all your help!! I appreciate it!
Click to expand...
Click to collapse
I know how frustrating this stuff can get, so I'm glad you got that behind you! I'll keep my fingers crossed it sticks!
Hi,
My nook color seem to be found in an impossible loop boot. I tried many thing like re-installing OS, Bootable Cyanogenmod on SD Card but I can't pass the boot. I currently have Clockworkmod V. 3.0.0.6 and I tried to re-install the cyanogen OS but it ain't working. I know that at a point I had a boot problem and tried the reset to factory option in Clockworkmod but I think this was not a good idea. If anyone out there may think to have an idea to unbrick my nook just bring it on I'm willing to try anything.
Thanks!
mathieu660 said:
Hi,
My nook color seem to be found in an impossible loop boot. I tried many thing like re-installing OS, Bootable Cyanogenmod on SD Card but I can't pass the boot. I currently have Clockworkmod V. 3.0.0.6 and I tried to re-install the cyanogen OS but it ain't working. I know that at a point I had a boot problem and tried the reset to factory option in Clockworkmod but I think this was not a good idea. If anyone out there may think to have an idea to unbrick my nook just bring it on I'm willing to try anything.
Thanks!
Click to expand...
Click to collapse
For one thing that is too old of CWM. You should have version 3.2.0.1 or newer. If you go to my tips thread linked in my signature, you will find a newer version. Plus if you read my item A8 you will see you are in a recovery bootloop. I have instructions there how to get out of it.
leapinlar said:
For one thing that is too old of CWM. You should have version 3.2.0.1 or newer. If you go to my tips thread linked in my signature, you will find a newer version. Plus if you read my item A8 you will see you are in a recovery bootloop. I have instructions there how to get out of it.
Click to expand...
Click to collapse
Hi Leapinlar,
Section A10 of your tips and tricks did it ! Thanks for your post
By the way now I'm booting to your CWM in the bootable SD Card right ? Now I have to re-install CWM right ?
Hi,
So I did some troubleshooting it seems that there are 2 CWM on my nook now. The old one that is broken and the new one that is loaded with the SD card. The new one is able to lunch CyanogenMod on the device's ROM. Hmm ... do I need to apply your partition fix ?
mathieu660 said:
Hi,
So I did some troubleshooting it seems that there are 2 CWM on my nook now. The old one that is broken and the new one that is loaded with the SD card. The new one is able to lunch CyanogenMod on the device's ROM. Hmm ... do I need to apply your partition fix ?
Click to expand...
Click to collapse
No you do not need my partition fix. The two versions are expected. The newer one is on the new SD you just made and the older one is on emmc (internal memory). The easiest way to get a newer version internally is to use Rom Manager, an app that comes with CM7. Just go to the app drawer and start it. There is an option in the app to update CWM. It will replace the old one you have on emmc with version 3.2.0.1 which is good enough.
Hi,
So everything seem to work with cyanogen mod now. But I have one big problem now. It seems that if I unplug my nook from the wall charger it shutdown like if my battery were dead. I looked the battery stats and it's at 100 %. I also opened the nook and looked the voltage with an voltmeter and it's OK, I even did a current test with a load and everything seem great. Anyone here had a similar problem ?
Thanks, your help is very welcome this nook is driving me nuts I am about to crash it to the ground
Shuts down after how long?
mathieu660 said:
Hi,
So everything seem to work with cyanogen mod now. But I have one big problem now. It seems that if I unplug my nook from the wall charger it shutdown like if my battery were dead. I looked the battery stats and it's at 100 %. I also opened the nook and looked the voltage with an voltmeter and it's OK, I even did a current test with a load and everything seem great. Anyone here had a similar problem ?
Thanks, your help is very welcome this nook is driving me nuts I am about to crash it to the ground
Click to expand...
Click to collapse
What version of CM have you installed? Does your Nook shut down immediately after unplugging, or after some period of disuse? If the latter, perhaps this is the "screen of death" issue wherein the Nook doesn't wake up after sleeping. See leapinlar's excellent user tips thread for details.