Uhm ?
Only thing I did was shutdown, as quickly as I could after it was starting ?
Now it does not turn on at all ?
Nothing ? No Usb on the PC ? ....
Wow those were some horror minutes
was able to flash stock using the smartflash tool .... phew
even that was giving me some problems....
Related
hello xda i have a x8 and i can flash it with flash tool and i did flash it with stock but it vibrate when i turn it on and the back light of the screen get on then restart ... without any thing on screen !!!
the flash tool detect it .. but it keeps on restarting .. the led is working also green when in flash mood and red as its charging !!
what do u think the problem is and is there any way posted here to solve this ?
Flash back to stock rom.
i did .. but no luck !
wemox said:
i did .. but no luck !
Click to expand...
Click to collapse
wat u wanna do? flash back to stock rom?try with seus/pcc
well open pc companion and choose update phone, it will bring the phone to its original firm. on 2.1, after that start all over again root, flash...
GUYZ , my S note died when flashing the muiu v4 rom.. everything was done but the battery died .. NOW IT WONT TURN ON ... any0ne pls help me guy (
vrataff said:
GUYZ , my S note died when flashing the muiu v4 rom.. everything was done but the battery died .. NOW IT WONT TURN ON ... any0ne pls help me guy (
Click to expand...
Click to collapse
switch phone off
remove battery and reinsert ...now keep the phone on charging for more than 1 hr
then restart
i had similiar problem when i was updating
hope this solves ur problem
i think then u can put ur phone n dwnld mode and flash a gb rom wipe everything and start fresh
still nt workin wait for expert to reply
OH MAN
sitanshu91 said:
switch phone off
remove battery and reinsert ...now keep the phone on charging for more than 1 hr
then restart
i had similiar problem when i was updating
hope this solves ur problem
i think then u can put ur phone n dwnld mode and flash a gb rom wipe everything and start fresh
still nt workin wait for expert to reply
Click to expand...
Click to collapse
bro its not workin man .. im so dead .... pls anythin else ??
vrataff said:
bro its not workin man .. im so dead .... pls anythin else ??
Click to expand...
Click to collapse
Can you enter download mode? If so then flash gingerbread firmware using pc odin. then wipe in stock recovery, if stuck on boot.
Sent from my GT-N7000
results of an incomplete flash. use pc odin and flash a stock GB rom. make sure the battery is charged fully.
Sent from my GT-N7000 using xda premium
And for future reference, if you're that amped up about flashing a rom with a low battery just plug your charger into your phone while in cwm and your phone will continue to charge.
Att.Fan1982 said:
And for future reference, if you're that amped up about flashing a rom with a low battery just plug your charger into your phone while in cwm and your phone will continue to charge.
Click to expand...
Click to collapse
+1
Sent from my GT-N7000 using xda premium
yup it was chargin but i accidentally unknowingly must have pulled it a bit.. and no i cant enter download mode at all... phone will not even turn on :crying:
Which kernel were you using to flash the ROM?
Sent From An Awesome Jelly Bean'd Galaxy Note
If all else fails and you still can't boot up your phone, then go get yourself a usb jig... try to see if the jig can revive back your phone.
please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.
Hello Yestarday i'v tried to flash my galaxy and i used odin , it's started to flashing and phone was in good mode before flashing and was in download mode , while flashing its just stuck in "Setup Connection.." then i tried to unplugging the battary and re enter it but when i re inserted it , the phone just completely dead black screen with out any sign of life and when i try to plug the usb into the pc its send msg "sec s5pc110 test b/d " i readed about jig usb but it's will work if i use it ? or othe phone just bricked and no selution ? thank you for reading my post ! hope that you will help me
ur fone got UBM or what? try charging first, n confirming what sgs u got?
Sent from my GT-I9000 using xda premium
I tried to install rosemary fonts in my turbo ... I flashed the zip with cwm recovery ... After flashing it , the phone got stuck on canvas turbo logo ... I tried to flash the stock rom .. Bt while connecting it to sp flash tool i removed out the usb when device was detecting in sp flash tool ... The phn is not starting up now... Led is also not glowing when i connect it to charging before connecting in sp flash tool charging was done ... Now the phn is juzz not starting up ... I took it to care center bt they are saying tht internal display is broken out and it costs more than 7k ... I cant understand thts it software or hardware issue ... Is my phone brick ? ... I juzz can't under tht what is happened to my phone .. Needed expert advice urgent ... Plzzz plzzz help out
Use "Format+Download" option in SPtools
SPtool us not detecting only now my phone
_yassh_ said:
SPtool us not detecting only now my phone
Click to expand...
Click to collapse
Reinstall drivers and try again.
I tried a lot ... Bt my phone is dead nd it's showing nothing
plzz help me out
battery removal.
_yassh_ said:
plzz help me out
Click to expand...
Click to collapse
.
I heard we can connect with simulating battery pulling or removing the battery any body no how to remove the battery
Factory reset your phone