adb shell, sqllite, build prop...Any other non-tech major people around here a little lost?
I'm rooted. I don't want the new update. I can follow directions but would be more comfortable if some basic instruction were written. Treat me like I'm 10.
It looks like the best way to do this is as follows:
"From this thread:
http://forum.xda-developers.com/showthread.php?t=874871
Attached is a working sqlite3 binary.
Copy it to /system/bin
(I transfered it to my SD, then used rootexplorer (mount R/W) to copy into /system/bin))
you will now be able to edit sqlite databases on the nook itself.
--------------------------------------------------------------------------------
Attached Files sqlite3.7z (11.9 KB, 56 views)
--------------------------------------------------------------------------------
In your terminal:
$ adb pull /data/data/com.bn.devicemanager/databases/devicemanager.db devicemanager.db
$ sqlite3 devicemanager.db
sqlite> update registry set value='manual' where name='com.bn.device.fota.mode';
sqlite> .q
$ adb push devicemanager.db /data/data/com.bn.devicemanager/databases/devicemanager.db
$ adb reboot
"
Do I unzip the attached binary and paste that into the location or the .zip as a whole? What do I use as a terminal?
I've been flashing my DROID since day one but the NC development circle has been far from entry level user-friendly. Any help would be appreciated.
you can do it on windows too.
1) pull/get/copy the.db file from your phone to your pc
2) update the database file using sqlitebrowser. I.e run the sql command "update ......". Close sqlitebrowser.
3)push/put/copy the updated .db file to the same location overwriting the original.
britoso said:
you can do it on windows too.
1) pull/get/copy the.db file from your phone to your pc
2) update the database file using sqlitebrowser. I.e run the sql command "update ......". Close sqlitebrowser.
3)push/put/copy the updated .db file to the same location overwriting the original.
Click to expand...
Click to collapse
Progress. However...
I got SQLite on my PC. I found the devicemanager file on my NC, pasted it to my SD card for transfer over to my PC for editing. I trasnferred the file over to my PC for editing. I open SQLite but have no idea how to use it.
I just did this today using sqlite editor only!!! Its a GUI so it real simple to use.
1.Install the apk
2.reboot
3.go to extras and launch sqlite editor
4.allow it, give it the permision it needs
5.look for DeviceManagerService
6.click on devicemanager.db
7.click on registry
8.look for _id 7, name>>>> "com.bn.device.fota.mode"
9.scroll to the right and click and hold value field "auto", until a little pop up shows and select edit field
10. Change the value from auto to manual
11. Save
Done!!!
If you need the apk here is a link I just made
?d=LTSQDZ65 for megaupload (sure u guys can piece it together!)
Let me know if it helped anyone!
Yes, we totally need another thread on this. I must note that pushing the build.prop in my thread and my two Nook Colors have not updated. Dunno about this method or others. Caveat emptor!
This is exactly what I was looking for. Thank you. Very simple.
Sent from my NC using XDA App
Thanks for breaking it down for us, nookme.
Do we need to do this if we are operating from an SD bootable Froyo or CM7 ROM?
tablo said:
Thanks for breaking it down for us, nookme.
Do we need to do this if we are operating from an SD bootable Froyo or CM7 ROM?
Click to expand...
Click to collapse
In theory it should work for both, whether its a soft root mod or simply a bootable sd card that emulates froyo... It's a matter of just having root access and changing a registry setting on the device itself. Hope this shines some light! happy rooting ppl
Not noobie enough for me, sigh
So, if I have followed these directions from an earlier post have I messed something up? Not blocked updates at all? I don't understand the directions in this thread. What happens if I don't block the update? There must be a lot of people like me who had the technical skills to manage the root process but don't understand all of your coded instructions. I read in another thread that I should do a Titanium backup. How does that help after an update? Will market aps that have already been downloaded still work? Will everything revert to stock? Could someone explain what we should expect? Thanks!
To disable OTA (over the air) updates:
Change the name of this file: otacerts.zip to anything else
To do this, get root explorer ($3) from the market
Run root explorer
Go to etc/security/otacerts.zip
Hit the little mount button near the top to change r/w to r/o
Rename the file otacerts.zip to otacerts.zip_DISABLED_OTA_UPDATES
Hit the little mount button again to change r/o back to r/w
Droiddict said:
So, if I have followed these directions from an earlier post have I messed something up? Not blocked updates at all? I don't understand the directions in this thread. What happens if I don't block the update? There must be a lot of people like me who had the technical skills to manage the root process but don't understand all of your coded instructions. I read in another thread that I should do a Titanium backup. How does that help after an update? Will market aps that have already been downloaded still work? Will everything revert to stock? Could someone explain what we should expect? Thanks!
To disable OTA (over the air) updates:
Change the name of this file: otacerts.zip to anything else
To do this, get root explorer ($3) from the market
Run root explorer
Go to etc/security/otacerts.zip
Hit the little mount button near the top to change r/w to r/o
Rename the file otacerts.zip to otacerts.zip_DISABLED_OTA_UPDATES
Hit the little mount button again to change r/o back to r/w
Click to expand...
Click to collapse
If you read this >> http://forum.xda-developers.com/showthread.php?t=1007551
you will see that the sqlite method is used by many and is the simplest way too, again this is a GUI, so no shell command line... How can this be difficult??
Just follow my steps... it works
I have had nothing but problems with my rooted NOOK Color due to B&N auto updates. I followed your instructions and now I hope my problems are resolved and my NOOK Color will never update again.
Thank you
Related
You can find the latest version of this app on the slideme app store.
http://slideme.org/application/adfree
This is the old thread, I started a new thread in the general section => http://forum.xda-developers.com/showthread.php?p=40759351
================================================================================================================================================
Spoiled by ad free browsing on my normal desktop computer it became increasingly annoying seeing all the ads on my phone. However it's really easy to make them disappear, although you most likely will need root on the phone.
Download the hosts.txt file from http://www.mvps.org/winhelp2002/hosts.txt, you may need to run dos2unix over the file to remote \r characters, rename the file hosts and copy it to /system/etc on your phone and say goodbye to most ads.
You may find the list to be imperfect, for example some feedburner URLs are "blocked" as a result which can screw with RSS feeds, although it's annoying giving too much info to Google but like everything else in life some things are a trade off.
If you want to root your phone, try this article.
Thanks for this!
As soon as I read the topic title I realised what you were doing and I never thought of it myself.
My hosts file was /etc/hosts though, not /system/etc/hosts
Dark X Dragon said:
As soon as I read the topic title I realised what you were doing and I never thought of it myself.
Click to expand...
Click to collapse
I've been using this technique for a bit, just didn't think to post about it before did a quick search and noticed no one else had so thought I might as well
My hosts file was /etc/hosts though, not /system/etc/hosts
Click to expand...
Click to collapse
Doesn't seem to matter, I just checked the /etc dir and it has the same hosts file.
Actually, /etc is a symbolic link to /system/etc, so your hosts file is really at /system/etc -- however, accessing the file through either path is equivalent.
Ha ha hosts exists on android!? I had no idea. I'm also a spoiled ad-less pc user. This is great. Thanks.
If you can't download the file above (it appears as text in browser), replace .txt with .zip at the end of the url. This will download the zip file which u can later unzip with an unzip app in the market.
Ok. I can't paste over the original hosts file using the phone? Astro and lynda file managers don't do it for me. And yes I am rooted, running 1.5 dudes build. Can this be done only from a PC?
ShatBag1105 said:
Ok. I can't paste over the original hosts file using the phone? Astro and lynda file managers don't do it for me. And yes I am rooted, running 1.5 dudes build. Can this be done only from a PC?
Click to expand...
Click to collapse
You have a couple of options, you can download the terminal app from the market and use it, or you can use ADB to shell into the phone, or wait for someone to code an app to do it all for you.
For the time being go with installing terminal, then type 'su' to become root. That is unless you have a copy of adb handy, if you can 'adb shell' the following commands are the same, except you can copy and paste.
Then remount the system partition read-write.
Code:
mount -o remount,rw /dev/block/mtdblock3 /system
Then you go into the etc dir
Code:
cd /system/etc
Then you can rm the hosts file
Code:
rm hosts
Then grab the hosts.txt file
Code:
wget http://www.mvps.org/winhelp2002/hosts.txt -O hosts
Always more than one way to skin a cat, but the above works for me(tm)
lbcoder said:
Actually, /etc is a symbolic link to /system/etc, so your hosts file is really at /system/etc -- however, accessing the file through either path is equivalent.
Click to expand...
Click to collapse
Ugghh, I read that ages ago but really didn't commit it to memory. It is now. =)
There's a fair chance I won't get around to it but I'm tempted to take this ad blocking further. Namely an automatic app but there might be more to add to it.
Thanks for the help delta. I figured it had to be done in terminal. And you know, this would definitely become very popular as an app.
I'm a dummy its etc not ect
delta_foxtrot2 said:
Then grab the hosts.txt file
Code:
wget http://www.mvps.org/winhelp2002/hosts.txt -O hosts
Always more than one way to skin a cat, but the above works for me(tm)
Click to expand...
Click to collapse
(I am using the terminal program on the phone)
Until the above step, no problems
After typing in the above I get the following message:
"bad address "www.mvps.org"
I checked for typing errors, tried it 3 times but get the same error message
Any suggestions please?
thanks
nyayo99 said:
(I am using the terminal program on the phone)
Until the above step, no problems
After typing in the above I get the following message:
"bad address "www.mvps.org"
I checked for typing errors, tried it 3 times but get the same error message
Any suggestions please?
thanks
Click to expand...
Click to collapse
Try it without the http://www. It might work like that. This is a lot harder than it should be lol. The g1 is putting up a fight!
ShatBag1105 said:
Try it without the http://www. It might work like that. This is a lot harder than it should be lol. The g1 is putting up a fight!
Click to expand...
Click to collapse
Thanks, but this didn't work either.
Some googling indicated a possible DNS issue.
So I looked up the IP address (209.68.48.119), substituted that into your instructions and presto, everything worked!
Many thanks for the ad killer option for the G1
Aah beautiful work. Just to clarify for newbs like me. The last line is (# wget http://209.68.48.119/winhelp2002/hosts.txt -O hosts). Make sure that -O hosts is a captialized O.
ShatBag1105 said:
Aah beautiful work. Just to clarify for newbs like me. The last line is (# wget http://209.68.48.119/winhelp2002/hosts.txt -O hosts). Make sure that -O hosts is a captialized O.
Click to expand...
Click to collapse
Yes, capital letter o, lower case o stores the output of wget into the file which isn't the desired outcome
I plan on suggesting the following URLs to the hosts.txt guy to block admob ads in apps
p.admob.com
analytics.admob.com
r.admob.com
In the mean time you can manually add it to the hosts file yourself, just copy and past from another line.
After updating the hosts file you may need to reboot or wait for the hostname to expire from the internal lookup cache, unless someone knows a quick way to flush the cache to speed up the process that is.
Thanks for this. Worked great for me. Very helpful tutorial.
Just uploaded "AdFree" to android market, this does all the steps I laid out manually at the touch of a button.
Its funny how
127.0.0.1 localhost
is the only thing blocked in the /system/etc/hosts file. lol.
andonnguyen said:
Its funny how
127.0.0.1 localhost
is the only thing blocked in the /system/etc/hosts file. lol.
Click to expand...
Click to collapse
That isn't "blocked" and in fact nothing gets blocked by the hosts file it just points hostnames to the local system, which usually has no web server running so the connection fails immediately.
However you MUST have localhost listed or various things will fail and cause all sorts of issues.
New version of AdFree is now up, I have the app adding the admob hostnames to the bottom of the list.
There is many of you that asks how to remove this and that preinstallaed apps in different ROM
When a developer put apps in system/app it can not be removed so easy.
But if you have RomManager or fakeflash´s update.zip there is a other way.
I have attached a zip fil that contains a ordinare ROM installation script that only contains delete and copy.
Download file and unzip on your computer and take a look in the folders
data/app
META-INF/com/google/android/update-script
system/app
If your only wish is to remove a systemapp
edit the file update-script (textfile)
and add line with the filename of what you want to remove:
(example)
delete SYSTEM:app/unwanted.apk
delete SYSTEM:app/unwanted.odex
If you want to install some apps put them in system/app for not installable
and data/app for apps that can be removed as usual
rezip folders and install zip with RomManager NO WIPE!!
cm6 azures you will get a error because not same structure for data/app
never mind just select reboot. Delete will work anyway.
Sometimes there will be .so files in system/libs too. They are little more difficult to know which to remove so that demands more knowledge of the app.
Use for instance Astro filemanager or Estrong to look in system/app for correct filename to delete
Script work even if *.odex not exist.
The fact that when you zip folders it will not be signed so file will not work with adb recovery
Googleapps filenames:
CarHomeGoogle.apk, CarHomeLauncher.apk, com.amazon.mp3.apk,
Facebook.apk, GenieWidget.apk, Gmail.apk, GoogleBackupTransport.apk,
GoogleCalendarSyncAdapter.apk, GoogleContactsSyncAdapter.apk,
GoogleFeedback.apk, GoogleGoggles.apk, GooglePartnerSetup.apk, GoogleQuickSearchBox.apk, GoogleServicesFramework.apk, googlevoice.apk,
HtcCopyright.apk, HtcEmailPolicy.apk, HtcSettings.apk, kickback.apk, LatinImeGoogle.apk, LatinImeTutorial.apk, Maps.apk, MarketUpdater.apk, MediaUploader.apk, NetworkLocation.apk, OneTimeInitializer.apk, PassionQuickOffice.apk, SetupWizard.apk, soundback.apk, Street.apk, Talk.apk, talkback.apk, Twitter.apk, Vending.apk, VoiceSearch.apk, YouTube.apk, QuickSearchBox.apk, Provision.apk
Other apps:
ADWLauncher.apk, Gallery3D.apk
but filename may be different depending of ROM
Mainpart must exist for using phone normally
Hope that this help to remove "non-removable" systemapps in future.
/Snakehult
Good guide.
via Legend using XDA-app
Thanks snakehult - great guide and very useful!!
snakehult said:
(example)
delete SYSTEM:app/unwanted.apk
delete SYSTEM:app/unwanted.odex
Click to expand...
Click to collapse
It may be worth explaining how people:
- can find out the name of the app they want to remove;
- how they know whether to add the suffix of *.apk or *.odex, or both;
Thanks again for your efforts!
c_man said:
Thanks snakehult - great guide and very useful!!
It may be worth explaining how people:
- can find out the name of the app they want to remove;
- how they know whether to add the suffix of *.apk or *.odex, or both;
Thanks again for your efforts!
Click to expand...
Click to collapse
Yes you can use some regular filemanager such Astro or Estrongs and look in system/app
Always delete both, script work even if odex file is missing
c_man said:
It may be worth explaining how people:
- can find out the name of the app they want to remove;
- how they know whether to add the suffix of *.apk or *.odex, or both;
Thanks again for your efforts!
Click to expand...
Click to collapse
cool guide!
anyway you have to detect the filename of the apps this way:
enter the recovery mode (in modaco-root-r4: recovery-windows.bat)
now type:
adb shell
mount -t yaffs2 /dev/block/mtdblock3 /system
ls -l /system/app
(this will give you the list of system apps, with space usage)
you have to delete both .apk and .odex files (the latter may not exist)
I use to delete the bigger ringtones too, the list is given by
ls -l /system/media/audio/ringtones
it is safe to delete, after you setup the google accounts (ie after first boot):
HTCSetup*
com.htc.Setup*
Stock*
HtcFoot*
NewsRead*
wow its working......thanks dude........
Uploaded with ImageShack.us
http://android.modaco.com/content/h...apps-from-the-htc-desire-with-adb-in-windows/
Simple guide from MoDaCo
That must be the hardest way to remove apps i guess Have you seen "modaco guide"? All you have to do is reboot your phone in to recovery mode and type 2-3 commands in ADB. Simple as that.
Thanks anyway for your efforts
Many way för same thing
But with a custom-made zipfile you always remove/install favourite apps without adb. And quick modify new ROM install.
Sent from my Legend using XDA App
Hello,
Good guide.
The Legend may be rooted to do this?
I am a newbie.
Thanks.
bobstar_fr said:
Hello,
Good guide.
The Legend may be rooted to do this?
I am a newbie.
Thanks.
Click to expand...
Click to collapse
As I see it, no use to do much in the dev forum without an rooted Phone
hey guys, thanks for bringing this up. i just tried modaco site method and i deleted stock and its widget only. the internal storage shot from 113 mb to 122 mb and ram from 42 to 134 mb !
what else can i delete
Learners Lisence said:
hey guys, thanks for bringing this up. i just tried modaco site method and i deleted stock and its widget only. the internal storage shot from 113 mb to 122 mb and ram from 42 to 134 mb !
what else can i delete
Click to expand...
Click to collapse
Just delete what you will never use and....no regret
thank you cryshop for your expert advise
i tried deleting Innovation.mp3 by this script -
adb-windows shell rm /system/media/audio/ringtones/Innovation.mp3
said file not found even though its listed.
whats my mistake ?
i will try snakehults method also but later.
thanks
im trying to use modaco's method but what is the green recovery menu?
i dont understand i go in fastboot then recovery and then?thank you
edit done im stupid
Learners Lisence said:
thank you cryshop for your expert advise
i tried deleting Innovation.mp3 by this script -
adb-windows shell rm /system/media/audio/ringtones/Innovation.mp3
said file not found even though its listed.
whats my mistake ?
i will try snakehults method also but later.
thanks
Click to expand...
Click to collapse
Hmm, did you forget a slash or a letter in the command? because I tried and I could actually delete it.
@kdma : install ROM Manager from the Market, and there is an option inside the app : Reboot into Recovery (easiest way to get into recovery mod)
I also deleted /system/etc/clock* and saved some space again
(of course I don't need Htc clock widgets)
cryshop said:
Hmm, did you forget a slash or a letter in the command? because I tried and I could actually delete it.
Click to expand...
Click to collapse
cryshop, i was typing in the wrong directory
Ps - snakehults's appfixer is real delight ! smooooth.
except that my winzip is a trial version and legend dont recognize winrar files.
I was wondering how i got such good figures for change in space and ram the first time. i havent since then. my legend just likes the rebooting involved coz i dont use task killers anymore. and maybe i deleted more than just stock the first time
Will this work with android 2.2 on Hero?
Hey I've been looking all over for something like this. I downloaded the zip, added the lines
delete SYSTEM:app/mms.apk
delete SYSTEM:app/mms.odex
delete SYSTEM:app/email.apk
delete SYSTEM:app/email.odex
and rezipped it.
I used Rom Manager and selected install rom from SD card. It rebooted, seemed to execute the zip. But the original email and mms apps are still installed. What am i doing wrong?
kdma said:
im trying to use modaco's method but what is the green recovery menu?
i dont understand i go in fastboot then recovery and then?thank you
edit done im stupid
Click to expand...
Click to collapse
The first thing you should do is download the required zip file from modaco (I'm a new user of xda and is not permitted to post outside links here. You may easily find that post "24/May r4 - HTC Legend rooting guide - Now with 1.31.x" in android.madaco.com)
I think many of us rooted the device followed the instructions of Paul. So that file might be already in your hands.
Fastboot and then recovery, as you have done before. Run Recovery-linux.sh (or Recovery-windows.bat, if you use Windows) in a terminal window - your device shall be at the green recovery screen.
Open another terminal window and enter:
./adb-linux shell mount /system
and then you can push, pull or rm file. For example,
./adb-linux shell rm /system/app/Calculator.apk
./adb-linux push abc.so /system/lib
--
I didn't notice you have already solved the problem, when I compiled this post. It is no longer useful.
First of all, make a backup!! I am not responsible for the terrible things that can happen to an android device when things go awry lol....
Secondly, I have only tried this using Vegan rom (beta 4, and beta 5.1)... I am assuming it will work with any alternate rom but NO PROMISES!!
TO OBTAIN THE NEEDED FILES:
1) Do a google search for "swype on gtablet (kinda)"
2) Somewhere the search results (it was the very first one when I did the search), you should see a post on the tegratab.com forum entitled "swype on gtablet (kinda)" (posted by rothnic)
3) Download the package on that forum, and extract it. There should be three files located in this package: swype.apk, libswypecore.so, and build.prop.
**Keep the page open as we are also going to use the top of the build.prop file that rothnic posted there!! THANK YOU ROTHNIC!!!!!
INSTALL METHOD USING ROOT EXPLORER
I would complete these steps entirely from your gtab, as it does away with the need to transfer files from a pc, etc!
1) Using root explorer, copy first the swype.apk file, and paste it to \\system\app. Once it is copied, long press on it and click "permissions". The permissions should be set as follows:
Read: Check all three boxes down (for user, group, and others).
Write: Check the first box (for user)
Execute: Check the first box (for user)
2) Now again using root explorer, copy the libSwypeCore.so file, and paste it to \\system\lib. Make sure you mount the \\system\lib folder as "read/write" before copying. Once it is copied, set the permissions exactly as you did for the swype.apk file. Make sure you mount the \\system\lib folder as "read only" again before you exit.
3) Now its time to edit the build.prop file, only we are going to make it easy. Instead of going through and editing it, copy the top of the file that rothnic posted on the tegratab site, and replace the top of your build.prop file with what he has there. Don't edit it or anything, just copy it word for word. I did this in root explorer by doing the following:
Using Root Explorer, browse to \\system. Once in this folder, mark it as "read/write".
Locate the build.prop file, and long press on it.
Select "open in text editor".
Copy the text that rothnic had in the post on tegratab, and use it to replace the text that already exists there at the top of the file. It will fit exactly as the original one that you are replacing did. DO NOT CHANGE THE BOTTOM OF THE FILE AT ALL!!!
When you have copied the text, press the "settings" button, and press "save and exit".
(FYI, I am using Vegantab beta 5.1, and replacing the top of the build.prop file did not do any damage to the tablet at all)
Now restart the tablet.
When the tablet restarts, long press on any text entry field and press "input method".
Swype should be an option. Select it, and start swyping!!
If swype isn't listed, click settings, language and keyboard. Check the box next to swype.
(this will also be a good time to click on swype settings and DISABLE audio feedback, as it will drive you and everyone around you NUTS!!)
Now follow the steps above to set swype as your input method and enjoy!!
INSTALL METHOD USING TERMINAL (Courtesy of Terrypchan)
This can be done without root explorer, BUT you have to be willing to type commands in a terminal emulator. I did it without root explorer by using the terminal emulator app with the VEGAn b5 rom (which is already rooted). The only tricky command you need to do is:
1. su
2. cd /
3. mount -w -o remount /dev/block/mtdblock3 /system
Step 3 is how you mount /system as read-write. That allows you to copy the apk to /system/app and to copy the lib to /system/lib. You can also copy build.prop to /system here. I also did the chmod commands here as well, i.e.
chmod 644 /system/lib/libSwypeCore.so
chmod 644 /system/app/Swype.apk
I had already edited the build.prop on another machine where I could use a real text editor.
This is the command to remount /system as read-only:
mount -r -o remount /dev/block/blockmtd3 /system
reboot and I'm Swype-ing away.
any chance you could paste the build prop edit in here? For some reason my browser is cutting off part of it.
Thanx,
I bet the mod deletes this within the hour!
Hmm, wonder how long this post will last
Agreed... I respect the effort tho and his directions are perfect!
Thanks brotha...
Sent from my SGH-T959
Instructions worked perfectly for me with the small substitution of adb push/pull to edit the build.prop (root explorer force closed after I had edited the file and before saving so I said screw it ). Thanks!
Combine this with the rainex fix for screen smoothness and it makes for a pretty good time lol
Sent from my Droid using XDA App
You don't have to adb it, that's why he recommended root explorer. If you edit it there it automatically makes a backup for you. I've done this with three ROMs, vegan4, zpad3, and vegan5... Never had to use adb
Sent from my Zpad flavored Gtab...
Need help with editing build.prop....swype rar had build.prop in it. Do I copy that same file in full and paste it at the top of build.prop in /system/build.prop...I am confused as to hoe many lines of build.prop I need to edit or change?
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
worked for me just fine.
Followed instructions, and used a little common sence along the way. Now it's all up and running.
Thanks a lot for the write up..
Using swpe to type this...
Thanks so much man!
New2Android said:
Need help with editing build.prop....swype rar had build.prop in it. Do I copy that same file in full and paste it at the top of build.prop in /system/build.prop...I am confused as to hoe many lines of build.prop I need to edit or change?
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
Click to expand...
Click to collapse
No ignore the build file in the rar file....
You need to follow the directions exactly and copy the text from the forum post. Remember only the top portion
Swype Keyboard
Confirmed Working on the G tab following above steps. Stock TnT Firmware 3389. Working flawless. Sound and swype.
I am able to get the swype keyboard to come up and type on it but am not able to swype. Dont know what i am doing wrong.
Edited build.prop as shown in the forum still cant swype but just use swype keyboard as a regular keyboard.
Any help will be appreciated
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
Any downside to editing the build file in this manner?
Can you change it back after it is installed?
Do you have to redo this every time you go to update your rom?
TaterTot24 said:
Any downside to editing the build file in this manner?
Can you change it back after it is installed?
Do you have to redo this every time you go to update your rom?
Click to expand...
Click to collapse
Thats the nice thing about root explorer, it automatically makes a backup when you have modified it
Yes this would need to be redone for each rom.
Sent from my VegaN 'flavored' GTab...
New2Android said:
I am able to get the swype keyboard to come up and type on it but am not able to swype. Dont know what i am doing wrong.
Edited build.prop as shown in the forum still cant swype but just use swype keyboard as a regular keyboard.
Any help will be appreciated
Sent from my VEGAn-TAB-v1.0.0B5.1 using Tapatalk
Click to expand...
Click to collapse
I initially had the same issue, there's something incorrect in the build.prop. PM me and I'll get a copy of mine to you as i'm using VegaN5 as well.
Sent from my VegaN 'flavored' GTab...
Wow. I can't believe this is still here! Anyway, on to my question...
Is it possible/advised to edit the build.prop on a PC using a standard text editor like notepad? I ask because the browsers on my GTab don't show the whole of the text we're supposed to copy from tegratab.
Thanks in advance.
Editing on a pc is probably fine, however you have to make sure the formatting stays correct, otherwise it all goes south lol.
I printed out a copy of the top of the build.prop that rothnic posted on the tegratab site and used that for reference when editing on my tab....made it easier to see where I was in the text editor
Sent from my Droid using XDA App
TaterTot24 said:
Any downside to editing the build file in this manner?
Not that I have seen so far, and I've used this through two roms now
Can you change it back after it is installed?
as i2steve said, root explorer is awesome and makes a copy of the original file for you
Do you have to redo this every time you go to update your rom?
Click to expand...
Click to collapse
Unfortunatley, yes, so I would keep the files saved somewhere on your tab lol
Sent from my Droid using XDA App
I misspelled my first name when I registered my NC. So when I went to Settings -> Device Info -> About Your NOOKcolor, my name in the Owner field was misspelled. I was able to correct it online via BN.com but the NC wouldn't correct itself. It's a minor annoyance but wanted it corrected.
What you need:
Rooted NC with Superuser access
Root Explorer or equivalent
SQLite Editor or equivalent
What to do:
Use Root Explorer and navigate to /data/system to find the accounts.db file
Copy the file to the root of your SDCard (I was unable to make edits to the accounts.db file while it was located in /data/system)
Locate the copied file and open it using SQLite Editor
Open the "extras" table
CLICK AND HOLD the name field you want to edit. In my case it was the firstname field
Select "Edit Record"
Correct your name in the Value field
Click Save
You should receive a confirmation that the update was successful
Use the back button (soft key button on the bottom menu) to get back to Root Explorer
Copy the newly edited accounts.db file
Navigate back to /data/system
BEFORE YOU PASTE, rename the existing accounts.db file to accounts.db.old (just a precaution in case you don't want to lose the original file)
PASTE the newly edited accounts.db file into /data/system
NOTE: the r/w permissions are different between the original accounts.db.old file and the newly edited file Update the permissions of the newly edited file to match that of old file
Reboot
Once it's up, you should see your corrected name. I was able to successfully download a book using the NC Shop so all should be well.
** DISCLAIMER: Do at your own risk. I assume no responsibility if this doesn't work for you or causes issues with your NC. I can't imagine it will as it's a very minor database modification. ***
Yikes I goofed up my accounts.db file by editing it with the text editor (just didn't read the instructions carefully. Moving too fast.). Also didn't back up the file before editing (I know I'm an idiot ). Any idea how I can restore this file? Thanks.
Ok, I just managed to restore the file and all is ok, and my name is corrected. Next time I will read instructions better!
Phew! Glad to hear it worked out for you.
Sent from my rooted Nook Color using XDA App
I have a rooted NT, and i start to notice the owner/account name becomes "unavailable". I went to the location specified above, but couldn't find the entry. Would anybody happen to know how i can change it?
Thanks.
rvr350 said:
I have a rooted NT, and i start to notice the owner/account name becomes "unavailable". I went to the location specified above, but couldn't find the entry. Would anybody happen to know how i can change it?
Thanks.
Click to expand...
Click to collapse
This is the NC forum. You have a NT. Hop over to the NT forum and post question there.
Hello,
i dont have enough posts to post on the development side yet. And i was attempting to follow this post to block OTA's. http://forum.xda-developers.com/showthread.php?t=933291
I downloaded the sqlite3 binary, then used rootexplorer (mount R/W) to copy into /system/bin. From there do i just use Root Explorer to do the following?
/data/data/com.bn.devicemanager/databases/devicemanager.db
long press on devicemanger.bd
select edit with text
change "auto" to "manual"
save changes
reboot
this is what i tried but when i rebooted it didnt save. reverted back to auto. plus the code looked a bit different, instead of having a comma after "auto" it now has a capital "A". some of the other code looked different also. I deleted it and restored the original for now. but does anyone know what went wrong, im thinking its something to do with the sqlite3 binary.
JF-WS6 said:
Hello,
i dont have enough posts to post on the development side yet. And i was attempting to follow this post to block OTA's. http://forum.xda-developers.com/showthread.php?t=933291
I downloaded the sqlite3 binary, then used rootexplorer (mount R/W) to copy into /system/bin. From there do i just use Root Explorer to do the following?
/data/data/com.bn.devicemanager/databases/devicemanager.db
long press on devicemanger.bd
select edit with text
change "auto" to "manual"
save changes
reboot
this is what i tried but when i rebooted it didnt save. reverted back to auto. plus the code looked a bit different, instead of having a comma after "auto" it now has a capital "A". some of the other code looked different also. I deleted it and restored the original for now. but does anyone know what went wrong, im thinking its something to do with the sqlite3 binary.
Click to expand...
Click to collapse
I've yet to do this but from what I can gather you don't long press on devicemanager.bd You go into terminal (which if i remember correctly is under nook tools, I'm on froyo so i can't say exactly where it is) and then type the commands he listed.
You should be able to download a terminal from the market (just search terminal) if you can't find it