Database Develop

Upgrade to 6 stuck on windows loading

Hi,
I got given a couple of Treo 750 phones. Both on the Optus Australian Network so I scratched around for days and found the upgrade software. Shows update 2.27
1st one went perfect.
2nd one on same computer got through copying files and executing update and stalled at the start of completing update.
I got the Windows mobile screen show and it just was not loading for ages. Previous one loaded and then asked for input of Date, touch screen settings etc.
The installer can be re run but says no USB connection at the moment.
I have done a hard reset and get the palm display then locks on the Windows Mobile screen.
I saw procedures to use the Mini SD card but the cards I have won't work in any treo, they are not SDHC type but standard 2G ones.
I next found the recovery tool but holding the left lower button and then hitting reset did not work but does work on my good phone where it shows the coloured bars and SPL....
The left button is a bit dodgy so I suspect it may be faulty. Is there anything else I can try?
EDIT: Ok I pulled apart the phone, looks like it had a hard life as broken case around two screws and they would not unscrew easily. Found the tiny button had dry solder joints. Fixed that up and was able to recover using the reset proceedure.
Phone now working.

could you explain in more detail what you did. thanks man

webafile said:
could you explain in more detail what you did. thanks man
Click to expand...
Click to collapse
What would you like to know?
Once I physicaly repaired the phone as indicated in the edit I was able to hold the left hand button (which was faulty) and the reset at the same time that allowed me to get into the SPL mode and recover the phone.
I understand it very little and most posts on these forums are over my head.
I would like windows 6.1 but there is so much information that seems to conflict that I don't know I am game since it is now working on an official 6.0 Optus version.
I am happy to help but if you can maybe tell me where you are at the moment and what you want to acheive and what you have tried I hope I can fill in the gaps for you.

because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
thanks man

webafile said:
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
Click to expand...
Click to collapse
Ok to start with what country are you in and what telco were you with eg Vodafone etc as you will need that as a start.

USA and im with AT&A

Try the method describe in the thread below - Mine work
Hi, you might want to try this method
Follow it one by one and do not skip a step
http://forum.xda-developers.com/showthread.php?t=460783
I just did mine last Saturday (it was a Vodafone phone)
AT&T should be easier since the Windows 6 ROM is easier to get
If you'd like to update to WM 6.1, you should upgrade first to WM 6
Something i read about the radio not working to full capacity if you upgrade straight to 6.1
As for the WM 6 ROM, i'm sure you can find it
Good luck

Hi All,
I have a Treo 750 and it WAS running WM 6.0 Professional (OFFICIAL) and I got it onto the phone and then tried to install WM 6.5 and then I downgraded to 5.0 and tried to update back to 6 and it bricked my treo, any of you wonderful xda ppl have any solution?
Also, I have tried installing the ROM again (via SD updater) and it looks like this:
SPLASH1 OK
BOOTLOAD OK
GSM OK
Micro P OK
EXTROM FAIL
OS
Update Terminate
UPDATE FAIL
I cant install the windows installer one as WMDC 6.1 or ActiveSync 4.5 WILL NOT show the device up on the computer. I have Windows Vista Home Basic, and when I tried MTTY, the only ports I get are COM1, COM2, and COM3. I can't get the usb to show up. Even with MTTY 0.01 when I got the USB connection, it would not open. Is it Vista? Or am I not doing it right? ANY HELP WOULD BE APPRECIATED TO GET MY POOR TREO BACK!!!!!!!!!
Thanks
~Mike

Try this?
http://forum.xda-developers.com/showthread.php?t=427519

simunlocktreo said:
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
Click to expand...
Click to collapse
Is this universal (i.e. Hermes/BA/Trinity) or just for the Treo 750. I think what bricked it in the first place was installing a custom rom by veisen (WM 6.5)
~Mike

Didnt Work
That one thing didn't work. It keeps coming up ERROR 226: FLASH WRITE ERROR Anything else???
~Mike

[Q] Help: How to Revert to Stock WP6.5?

Hey guys,
I've searched everywhere but there's no definitive guide to revert to stock from WP7. Pretty much, I tried out WP7 on my dad's HD2, but he didn't like it. So I need to revert it, but there's so much stuff to know that it all gets pretty intimidating.
Anyways,
HTC HD2 w/ Windows Phone 7 (Using aMAGLDR V1.12 - Build: Jan 12 2001, 21:09:22 - by Cotulla 2011 [this ONLY, no other mods present])
Trying to convert back to Windows Phone 6.5
Using Windows XP
Have d/led Windows Active Sync but it won't connect to the PC even when the USB is plugged in. (I'm guessing this is the reason why I can't revert to stock, it won't even connect to the PC)
I've also d/led the latest stock RUU_Leo_1_5_TMOUS_3.14.531.1_Radio_Signed_15.42.50.11U_2.15.50.14_2_Ship from the forums.
It looks like I have all the resources but my PC won't even recognize the phone being connected to the computer. Must I do anything else besides attempting to flash the stock ROM?
Thanks A LOOOOTTTTT in advance!

I have the Exact same question anybody help please?

It might be you don't have the drivers installed that are needed, your antivirus could be preventing a connection, I had a similar problem where it seemed that it didn't recognize my phone uninstalled sync when into my bootloader it didn't seem to recognize my phone tasked 29 and it went through without a problem

::BUMP::
PLEASE someone help me out, this is getting soo frustrating, I switched to my laptop running Vista and it still won't recognize it.
I d/led Windows Mobile Device Center and it STILL won't work.
Please anyone.

Enter the bootloader screen then plug phone in and wait for it to say USB at the bottom then flash the stock rom from t-mobile
Sent from my FutureShocks HD2 MIUI using XDA App

Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back

xmoo said:
Do what he says in post above mine.
Or flash using SD-Card method!
Also read the MAGDLR thread dummy, there you also see how to revert back
Click to expand...
Click to collapse
dude u been around here long enough, no need for name calling
actually im having the same issue as of today
http://forum.xda-developers.com/showpost.php?p=11418541&postcount=1526
i was able to flash winmo through sd card but 10 different pcs wont see this phone now, from win xp to vista, win 7, mac !
phone works fine in winmo but cant connect, obviously cant flash hspl3 so im stuck on stock winmo, with both spls 2.8 and 2.10 and none of them makes a different
i'll bookmark this and keep following up and if i figure it out i'll update

back to stock LEO
I have same problem i install 2.2 android on my HTC hd2 (t-mobile) and now i can't sync my phone with computer to install stock LEO as well as there is no option on the 2.2 froyo for sd card if any one know how to get back to stock windows 6.5 let me know

I can't find the stock rom on tmobile

http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
tmobile stock rom.

Invalid IMEI???
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny

webmanny said:
So I went to this link because I want to flash my HD2 back to WM6.5 stock. When I enter the IMEI it tells me that it is invalid. Is there a way to get the stock rom from some other site?
I have a HTC HD2 T-Mobile LEO 1024. Model HTC Desire A8181.
Thank you in advance for your help.
Manny
Click to expand...
Click to collapse
sure you dont have a desire?

Yes I do I have a Model HTC Desire A8181. It still says HTC HD2, but it says Desire on the phone data screen.

lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.

Will SW upgrade lock my unlocked HD2 to T-Mobile??
Hi
My HD2 from Tmobile is unlocked & am using it in India.
It has SOFTWARE: OS :5.2.21889 (21889.5.0.87), Manila version:2.5.20121412.1
ROM Version :2.10.531.1 (82076) WWE
I am planning to upgrade the ROM to 3.14.531.1.
I read at forum that Post upgrade, my HD2 will default to factory settings. Does it mean that my phone will again be locked to T-mobile?
Pl confirm asap as I don't want a locked phone
Thanks...

no it will never be re locked again, no matter what you do.

Ahh but which one????
samsamuel said:
lol, and teh tmo website wont accept your imei, odd that. get the rom from HERE instead.
Click to expand...
Click to collapse
Ok dude this makes a lot of sense, but which one should I download? Are those version numbers or radio IDs? I don't want to brick my HD2.
Thanks for any help you may give.

those are rom version numbers. go for either 2.10.0 (not .1) or 2.13, or either of the 3.14

dude u have 2 download zune center if u got the wp7 rom thats how u sync the phone

Yes there is a way go to htcpedia.com register with them make your ocunt..and download htc hd2 stuck rom..then put your phone and bootlouder mode..and put the stuck rom you just download..makesure your phone is conecte it at least 50 % of batery no sim car no sd car.
Good luck bro..
sent it from htc hd2 android nexus one custom rom

[Q] I have a question, help me

I have a problem with my device and around the web I can not find much support for it.
Please help me. I have an HTC HD7 t-mobile and I want to update it to NoDo European version. How can I do?
thank you

can someone help me?

up help me please =)

filoman said:
up help me please =)
Click to expand...
Click to collapse
What help do you want??

just install zune sofware on your pc, plug in your mobile phone ,ones your phone is detected. it will take you tru the update and installation.
thats how i got mine, london.

NoDo update
download and run and zune software on you pc, connect your hd7 phone to your pc once the system dictates your phone, it will take you tru the update and installation process. thats how i did mine in london t-mobile....

Guys, I think he has a US T-mobile HD7 and he wants the Euro ROM on it instead of the US one that the Zune might be detecting as soon as he plugs it in.
The only advice I can ask you to try is to first rollback to your previous restore point that Zune allows, and then use the process to debramd the device, via one of the threads in the stickies. Then download the Euro ROM of your choice and flash it via the bootloader mode.
The easiest way is, get a Euro device and sell this. LOL.
Sent from my HD7 using XDA Windows Phone 7 App

Head over to the HD7 Development section. Follow the instruction for unbranding your phone. Once you have the unbranded ROM flashed you can push through the unbranded NoDo ROM.
Beware though, M$ has put out some notices about "jailbroken" devices and their ability to update in the future. Not saying its going to affect anything, just always good to read before jumping in. The more you know...

thanks for the replies, my problem is that I don't also know how unbranding my phone. I only know that my CV is 531.
can you link me please?

chevron 7 not working for me help!!!

I have done every step on more than 1 tutorial but i get the error messsage i cant comunicate with the phone, the phone is connected i have installed the certificates, i am not in guest mode etc...i have a htc hd 7 with os: 7.0.7392.0, and can homebrew apps be runeed with the device not being unlocked?

Your phone must unlocked for homebrew or install .xap Files.....chevron jailbreak.....first you must flash a New Rom because Chevron not compatible With you'r Version.....i PM you the right link Witz the Rom tomorrow because im in my bed =] and its late in Germany i must work early......RLY early in the Morning :-] but i can you help you np for me
Sent from my HD7 T9292 using XDA Windows Phone 7 App

http://forum.xda-developers.com/showthread.php?t=876451
Here you can find pre-NODO roms.
I cannot tell you which one is for you since you didn't post any info on your phone.
Bye!

Problem installing HTC HD7 HSPL / RSPL

Hello to all ..
My problem is that here ..
In a few words I wanted to install in my HTC 7392 with node HD7 SPL Bootloader 4.5 and unlocked the rom modified mango ..
but before you do anything, I had to install HSPL / RSPL in my HTC HD7 ..
I downloaded the "DFT_XSPL_WP7FG1"
I followed a guide ..
MAH reached the point of selecting the SPL, the list of the program reached only up to 3.4 ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
so going forward I get an error in the program where it was impossible to go on ..
So I unplugged the HD7 and I tried to do it again ..
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
I already tried to do the backup but nothing = (..

What does the spl screen say when your in bootloader?
Sounds like you have the 4.xx version.. If that's the case you need to flash an official nodo rom first. The hspl doesn't support spl's 4.xx yet.
Sent from my HD7 T9292 using XDA Windows Phone 7 App

crazysax1 said:
MAH OSPL when I open "volume down and power button" not come out as written, but all I get only one written with the words "SS-BC PD29100 (4k) ..
What has happened? knows someone explain why?
Click to expand...
Click to collapse
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.

But you have to worry about?
What are the consequences?
Is serious?

crazysax1 said:
Hello to all ..
My problem is that here ..
so my HD7 being with SPL 4.5 you could not do so I tried to install the 3.4 "I did na bull****" ..
(..
Click to expand...
Click to collapse
you didnt read the instructions that are in giant bold letters all over those threads...you had spl 4.5 and tried to install the hspl. youve unfortunately half bricked your phone and currently it looks like it may NOT be fixable at all. try the gold card method listed above, i havent done it or read the thread but briefly but it looks like it may be a work around. unfortunately tho youre phone is BBQ'd.

sh4d0w86 said:
if your Bootloader does indeed only have one thing written on it...
then you have half-bricked your device.
according to cotulla, here, it is impossible to recover such devices.
though...
according to dj.95, here, you can recover your device using the goldcard method.
good luck.
sh4d0w86.
Click to expand...
Click to collapse
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)

alessio81pa said:
i don't thing with the goldcard method we recover our device! my device work ok, but don't go to boot usb host mode because bootloader is half bricked! then no gold card works...
(or maybe it's me, that does not access the USB host mode?) ( camera + vol- + power?)
Click to expand...
Click to collapse
i honestly have no idea how goldcard method works.
haven't had any experience with it.
you may message the individual who's post i linked to and ask them.
sorry i can't be of more help.
sh4d0w86.

Half bricked possibilities
Hi friends. Do you really know anybody, if goldcard, Zune HTC update, JTAG or something another can solve hb problem? I am also in the "warnings late reading ignorants" club from last weak. But, I got a reply from a single "Half Bricked repairing" service near of Central Europe (GSM-TechNix.de): "Dear Sir, HTC 7 Pro is no Supported by JTAG! Sorry we can not help for this Phone." I have a little idea - to replace only internal information about bootloader version (I have no info on tricolore, but 3.2.2250.0 in Settings/about), connect to Zune and replace HTC update, if it is depend by this number. Is it possible? I have unlocked phone with pre-nodo (older backup has deleted by Zune), then HTC debug application or some homebrew features for values writing can work.
(From another forums:
_________
"Just updated my half bricked phone(bootloader problem) via Zune with HTC update for Windows Phone and the bootloader hasn't been fixed, so our only chance is with XTC Clip or DFT to come with a solution
Actually I got the same problem using an HTC Trophy A1 Version."
________
"For now your/our phone(s) are half-bricked. But as soon as a new update is available - including a new Radio Version everything will work fine again. Had the same problem when debranding my phone. After updating to 7932 via Zune everything was fine again - until I applied the leaked Mango Update.
So again - be patient "
________
"If your device is halfbricked you can use the goldcard method to recover your phone. If it's full bricked you need to make a jTag."
________
"Goldcard cannot repair halbricked WP7 phone."
________
). Thanks for replies, sorry for my english. M.