Database Develop

No Sound

I have no sound whats so ever?
I think i know the answer to my problem - i'm just not sure how to fix it.
Basically part of my headset is stuck in the headset port. It's the little tiny tip section of the jack end. I think the phone thinks there is a headset plugged in and thats why the speaker is not working - also when taking calls i cant hear the other person and they cant hear me.
Problem is, what do i do about it? It's an awful small jack fitting in the first place - never mind trying to get the smallest part out of that hole?
Any idea's? I want to avoid returning the phone to O2 because when they last had it (the touch screen stopped working) it took 4 weeks before i got it back and I need the phone for GPS everyday!

OOooooo errrr.
Thats got to be the worst of luck.
I can only siggest two possible things to do and they're nasty, very nasty!
1. Get a cocktail stick and dip the smallest possible amount of SuperGlue on the end(and I mean the smallest dribble.) Infact put a drop on a ceramic tile and dip the cocktail stick into it for a really small amount. Then insert and hold for a few minutes. You may have enough bond to ease out the remains.
2. If you dont use the jack you could shove a nail in there and gently wiggle if for quite a while to break the solder points carefuly and then pull the jack off, thus disconnecting the headset.
Sounds rough and nasty but thats what I'd do and then if it failed I'd put the jack on the remaining headset and send it back to O2 for replacement.

X1 3.5mm socket broke my headphone jack :(

Hi,
Wanted to ask if this was a common problem. The 3.5mm socket on my Xperia has worn two pretty significant grooves into my headphone jack. It's now so bad that the right channel doesn't work half the time. The problem persists when I use the headphones in other devices to it's definitely managed to damage the heaphone jack.
I experimented with the included microphone lead and it has also managed to scar that a little so I immediately stopped using it.
Has anyone else encountered this problem? FYI the headphones are AKG K414P.
Thanks
Tome

The socket sucks. It ALMOST broke my in-ear headphone's jack. It's too tight.

yeah the socket is really tight on mine as well, haven't streaked any headphones yet though, maybe I haven't used them enough?

I have something like this. I think I have the same problem.

It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/

dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
That's what happened to me. Be sure to grab that rubber very tightly.

ksian said:
I have something like this. I think I have the same problem.
Click to expand...
Click to collapse
Same problem here, i think this is a common problem on all XPERIA. The socket is too damn tight.

Anyway once you know that you start taking care and you won't break anything. And it's clearly an advantage that it's so tight, if you're using big headphones and your X1 slips out of your hand, it won't touch the ground (Assuming the cable is not too long and you ain't too small ). I like this.

I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel

tome_1 said:
I think we're talking about two different problems here.
My original question was about the contacts on the inside of the socket being so strong that they have cut grooves into the headphone plug. The grooves are so deep that they will not make connection half of the time i use it so that I am losing the right channel of audio on my headphones.
The other problem you guys are talking about is that the heaphone jack holds onto the plug too tightly and so the plug is damaged when you try to remove it.
While you might be able to prevent the second problem by removing the plug carefully, there is no way to avoid the original problem that I reported.
It sounds like Ksian might have the same problem as me but i can't tell from the short reply. Has anyone else experience loss of audio through one channel of their headphones due to the socket cutting grooves in their headphone jack? I know for sure that the X1 socket is too hard as it always makes marks on plugs that are inserted into them, but i want to know if my headphone plug might also be too soft combining two problems to make me lose sound in the right-hand channel
Click to expand...
Click to collapse
I DO have BOTH problems. My plug has quite deep scratches. But no loss of audio so far. I think this will get better with time, the socket will also lose some material If your headphones are expensive and break quickly (and you absolutely want to keep your X1 as Mp3player) you might want to use a very small extension cord to avoid damage to the headphones themselves. Extensions of say 2" exist.

dogans said:
It is indeed too tight.
Managed to pull away the rubber coating on my headphones jack, while trying to unplug :/
Click to expand...
Click to collapse
Same thing it did to mine, killing my Creative Aurvanas's 3.5mm jack rubber housing. They still work but the rubber is loose.
Ah well, because of that I am actually looking at some Shure E530's (the Xperia is a pretty good source IMO). They have a detachable extension cord so i can use a L-plug instead of a straight plug.
Really, use L-plugs, they are a lot more durable against the tight socket. Its just because the sound is really great for a phone, hell, I bet its better than most MP3 players, else i would be very mad, killing my favourite IEM's . Very clean sound, although sensitive IEM's will hiss but that is expectable from such a 'noisy' thing like a fully packed-with-features phone.
But hey, a tight socket is better then a loose socket, or a proprietary extension cord like the HTC's.
Apart from killing my Aurvana's I still think the 3.5mm socket is High Quality Stuff. It just feels 'right' when you plug in your IEM's/headphones.

Keep in mind that you shouldn't keep the extension plugged in all the time because the phone actually detects this and routes certain sound events from the speaker to the headphones. For instance if you pick up a call with the extension plugged in but no headphones, you will not be able to hear the caller.

yeah i was thinking that i might have to make/buy a short extension to save my expensive headphones
it's like you guys are saying, the sound is good enough that i want to put good headphones on so i'll have to find a way to protect them. I wonder if the included handsfree extension is resistant to the phone's socket?

I use the stock extension. It gets scratched as well (have xperia for 2 months). As for the sound quality, I'm thinking about repairing my good old Ipod nano for listening mp3's. I do think, that it has better sound quality and more than that the battery of the phone won't die out so fast (playing music for about 2 hours a day).

Lol. Would not have noticed this without you guys. Who would look at their earphone jacks? Either they are very bored or something about their earphones is screwed up.
Does other HTC phones have these problems? Oh wait, only the THD has 3.5mm.

The jack has ground grooves into the jack on every single pair of earphones I own,and based on this alone, I'd say SE, give me my freakin money back!
Is it serious? Probably not. But is it supposed to do that? Hell no.
I don't want to use the stock extension cable, otherwise I wouldn't choose a phone with a 3.5mm jack, Jesus bleeping Christ.

I have the same problem here. I used a nokia handsfree and after 2 days I had that scratches and sometimes I couldn't here well, the sound was faded and i had to turn the jack in a certain position. Today I tried an Iphone handsfree and it doesn't work well..
I don't know why... Is it to thin? It's new but the sound is faded. I don;t get it? Has anybody tried this apple headphones? (The one with microphone, so 3 stripes on the jack)
LATER POST: I TRIED ANOTHER HEADPHONES AND THE SAME BLURED SOUND...SO I GUESS MY SOCKET IT'S SCREWED

well, then again the apple handsfree is thiner i guess, because i tried some Lg headphones and they were ok. the apple headphones are functioning conected on laptop. I don't know what to believe... I really wanted to use the apple stuff on this phone, i should buy an extender.

use your xperia handfree as an extension, have been doing that for over a year now, and even though it's scratched like hell, it works fine, without damaging my beats

Could you please tell me wich model of headphones by SE are they? I mean the x1 headphones.
I found out that iphone's 3.5mm socket is not like the others so the x1 is not like the others and maybe that;s the reason i can;t use the apple headphones.
ok...got it.."If they have a mic, then they're useless for anything but an iPhone.
Apple decided rather than follow the industry standard of Right/Left/Mic/Ground, they would make their own up. They chose to make their socket Right/Left/Ground/Mic, which means your N900 is trying to ground the headphones through the mic, which clearly will not work.
In short, they won't work on anything except an iProduct."

Phone stuck in "headphone mode" (PLEASE HELP)

For somereason, my phone is stuck in Headphone mode.
like on the top corner, it shows that my phone is still in headphone state.
the problem is that even when my headphone is unplugged my phone is still in that state...
...meaning that, without my headphones plugged in, the other party cannot hear me and i cannot hear them.
i tried soft and hard resetting the phone, but nothing works.
Everything else is working phone, it just that i cannot make a call, answer a call, listen to music without my headphone....
Any help or tips is greatly appreciated.
Thanks alot!!

it already happend to my phone.. what i did is i connect the headset again and did remove my battery and remove the headset then turned on the phone again and the headset icon disappears.
if your problem still continues, i guess you should go to sony ericsson for replacement it seems your jack is grounded or alike. i heard that the jack is somewhat tight and could put a groove in you headset male jack.

PROBLEM SOLVED....
http://www.portability.nl/windows-m...artphone-stuck-in-headset-or-car-profile.html
apparently its a hardward problem...

I had the same problem. This is what i did put your headset back in turn windows media player on now start a song and pull out the headset. Now it should get out of headset mode. Thats what has been working for me twice.

The other thing to watch for too, and this was a big problem with the older model HTC/SPV Devices, is that the detection switch inside the socket gets stuck.
I had this happen many times on my various SPV's up until HTC Started producing models where the headphones plugged into the mini USB.
If it does happen to be the switch getting stuck, you can try plugging in the headset and wiggling it about a bit, or i found that a wooden cocktail stick was a rather good device, to just poke in and rattle about a little bit.

shawty said:
If it does happen to be the switch getting stuck, you can try plugging in the headset and wiggling it about a bit, or i found that a wooden cocktail stick was a rather good device, to just poke in and rattle about a little bit.
Click to expand...
Click to collapse
the stylus is good too.

Hi there,
got the same problem. Tried everything, soft- and hard-reset, cleaned the connector with some alcohol....
Just before i got in the mood to open the case to have a deeper look at the connector, i stumbled over here
This is what i did put your headset back in turn windows media player on now start a song and pull out the headset. Now it should get out of headset mode. Thats what has been working for me twice.
Click to expand...
Click to collapse
This also worked for me
As a conclusion, i think there are several reasons (as usual ) that lead to this problem.
It may partly rely on the connector itself, e.g. bad "on" resistance of the contacts or mechanical twisted in any way.
Maybe some of the internal pull-up resistors are to weak also.
Additionally the software driver may have some issues, to indicate the "plug out" properly.
I also had such issue on HTC universal once upon a time.
It was also partly software related. In other words some "plug-in-plug-out" loops while playing some music solved the issue on that device.
Anyway, this maybe called another weird bug on a winmob platform.
Thanks for the hint again!!!
Best regards,
scholbert

It's me again
I wonder if these headphone problems had gone with the latest firmware.
With R1AA017 the "headphone mode" issue could be reproduced a 1000 times.
1. Today screen, plug in the headphone
2. plug out headphone, headphone symbol stays active
3. plug in headphone again and start WM player
4. start some music, plug out headphone, symbol is gone, sound from the speaker
EDIT:
As it seems with R2AA006 the "headphone mode" issue is gone.
1. Today screen, plug in the headphone, headphone symbol appears
2. plug out headphone, headphone symbol disappears
Works as it should!
Anyway, please report if you ever got these problems and what kind of firmware you are using.
Let's try to concentrate on stock images (R2... , R3...), otherwise this would get very confusing
Cheers,
scholbert

sent it back for repair ... this happened to me twice and i sent it back for repair and the problem was with the headphone not the phone itself

Hi it happened to me as well. so after few times i was pi.... off and i send it to back to SE repair centre. and i also claim a crack in case. and believe or not they fix it in 12 days. That means SE knows those problems very well. my advise is dont be shy and send it there , they will fix it without any hassle.

try to drain the battery and charge it back up.

I also sent it back. After 5 weeks the idiots at SE Service returned it unrepaired, charged me 40 €, and claimed that the phone was once opened (it was not).
Will now buy an HTC or Nokia. Never ever again an SE.

It Got Solved
Hi It's very simple take your stylus and insert it into the headphone socket and move very gently, It will solve the problem.
For me it had worked always.
Weird but works

Hi all
ive been having the same prob here ... :
phone remains in headset mode even after jack is unplugged.
have been trying:
turning registry entry
blowing (worked at very rare times )
stylus/ pin playing ..
till now, no good solution
my request:
is there a way ( cab install, registry hack) so as to disable the whole of the headset.. its ok if i dont use it anymore.. ! i want it software, like some sort of software to disable the headset module completely ...
awaiting reply.
thanks & Regards,

Yeah I think there is a way. If you search for when I posted about this last year I think someone says how to do it in the comments.
Lots of people seem to be claiming that software tricks can solve this problem. If that worked for you, that's a co-incidence. Even re-flashing a different ROM won't sort out a mechanical fault. Just go get a safety pin.

my experience about the headphone problem
First time, when happaned I was crazy, because I coudn't answer a call and the phone looks like was broken. I suggest,(not a big deal) to close the player program prior you disconnet you headphone or in radio panel mode, to swicth to speaker listenig first and then plug off headphone. Nothing else, don't worry

Well, since I'm using a new phone I've decided I'm going to open my phone up to manually fix this problem as for me, what happened was, a very tiny screw got lodged within the headphone jack. I managed to get the screw out but I think I damaged the connector responsible for signaling that a headset is plugged in.
I have one problem however, I dont have the security screwdrivers nessary to gain access so I'm wondering, if anyone know any tricks to open the phone up. I've heard I can use locktite to bond the screw to whatever I want to use however that would be something I'd consider if I cant think of anything else. Until then I'll try using a screw driver just large enough to wedge itself in place and unscrew but if anyone has any ideas or suggestions, please if you would be so kind.
In the meantime if I make any headway I'll let you know what happens. (Does anyone want to know anything if I do open it up?).

Ok I opened it up... Let me tell you it certainly was difficult. My phone had suffered the cracking problem which made it somewhat hard to take apart without it falling to bits but I managed nevertheless.
As I peeled away parts of the phone to get to the small headphone jack, I instantly found the problem, the little clip that performs as the switch to headset mode was buckled... I got some really tiny pliers and I managed to re-bend it however, the clip wasn't touching the contact switch! *RAGE*. So I play around with it a little more and realise hang on... it's moving too much, I then noticed that the clip was actually cracked *ANGER*.
So I decided... ok, off goes the clip. I permanently soldered the connection instead and hey presto, no more headset mode, of course this means, I can never use headset mode but that's not a problem for me.
If anyone wants any help, please feel free to ask . I managed to give the keyboard a clean also! (No more double presses or keys that dont respond either!).

With this goddamn problem, is it possible to connect stereo bluetooth with sound?

Hammerhead89 said:
With this goddamn problem, is it possible to connect stereo bluetooth with sound?
Click to expand...
Click to collapse
Answering the last question: YES it should work as bluetooth audio has nothing to do with the headphone jack and I normally used bluetooth headset with the headphone mode stucked
coming back to topic It seems it is depending on case more soft or hardware-related. in my case it was rather hardware, no mediaplayer/radio method helping and putting stylus in helped only two times.
So I used compressed air to blow through the jack and then cleaned it with the earbud head/material ONLY (as the bud does not fit in) on a wooden stick (but then you might have hard times to pull the rest of the budhead out)
Anyways it worked, so far after many tries to make sure it doesn't get stucked !
I guess in future WD40 may be even better
Man this phone is so good and yet so full of bugs !!

[Q] Headphone jack not working correctly

More recently the headphone jack on my Note has not been working correctly unless I push the cable into the jack and then pull with my hand towards the screen (if you can imagine that)
If I dont do this I can still hear something but alot of the sound is muffled and it is a lot quieter, making the music impossible to listen to with out getting frustrated and wanting to throw it at the ground. Sometimes I can get it stuck in the right position and it works fine and I dont need to hold it.
Do you think it is broken or just dirty? I can take it apart and clean it, but I dont think I could replace it?
Any ideas? Have you had this before?

jonny00707 said:
More recently the headphone jack on my Note has not been working correctly unless I push the cable into the jack and then pull with my hand towards the screen (if you can imagine that)
If I dont do this I can still hear something but alot of the sound is muffled and it is a lot quieter, making the music impossible to listen to with out getting frustrated and wanting to throw it at the ground. Sometimes I can get it stuck in the right position and it works fine and I dont need to hold it.
Do you think it is broken or just dirty? I can take it apart and clean it, but I dont think I could replace it?
Any ideas? Have you had this before?
Click to expand...
Click to collapse
As far as I believe, it may not b just dirty, but the headphone jack has some issues..may b it was only dirty in the beginning, but now headphone jack would have become loose/not fitting the headphone pin correctly, because u are pulling the headphone jack with ur hand towards the screen, everytime..so better option would be service center
Hope I didnt confuse u..

May be 3.5 mm jack has become loose show it to a service center
Sent from my GT-N7000 using xda premium

[Q] Audio jack not working

My 3.5 mm audio output has been having increasing problems and it won't recognize most jacks anymore, including my earphones. Do you know of any trick to make it work, or would I need to replace the part completely to have it working again?

I think it depends on the kind of issue you see.
Example:
My audio jack was not working when I received my used Droid 4 from the USA.
I realized that my headphones are not deep enough in the phone. When I push them in a bit more they worked properly, but hey flip out as soon I touch the cable or I move.
1. Look if the Headphone jack is dirty and clean it up: h**ps://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/85247/p/30,6720,8096/c/8149,8172
2. If its cleaned and still not working its probably a hardware issue. ( Now you need to find whats broken / not working )
- A weak point is that the feeds of headphone jack are only pushed against the mainboard. I can imagine that carrying the phone in the pocket will bend that feeds. Meaning if you try to use the headphone jack outside of the pocket it will not work properly. You can try to push from the outside of the headphone jack to see if they work then properly. If yes... you need to disassembly the phone... and bend the feeds of the headphone jack back so that they get contact with the mb again.
- In my case after cleaning the headphone jack, the plug still didn't fit into the jack properly. I didn't want to open the Phone since ifixit says its a mess. So I tried to fix it without replacing it. I pushed a pice of toothpick into it to widen the deepest part of the jack. That fixed my Headphone jack. But the risk is there that you completely mess up the jack and you have to replace it completely.
Try at your own risk!

It is VERY easy for lint, dust, and grime to get stuck in the audio input socket. It's happened to my phone several times, since the audio jack isn't covered by any sort of cap. If you turn the phone off, shine a light into the socket, and (gently) dig around with a safety pin, you should be able to get most of the gunk out. It'd surprise you, how much lint can get stuck in there!
If you can find something to cover the audio input socket with, even better.

It was just dirty after all - I had like 3 mm worth of lint inside
I was worried it's some HW issue because different jacks responded differently... Glad it's not I use BT HF most of the time (with 3,5 jack output for headphones), but sometimes I like to plug the phone into my speakers, plus BT isn't that comfy for watching video...
Pipe cleaner wasn't very helpful, but a pin did the trick
Thanks for your help, guys!