Related
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
This is the right place to ask general questions.
1. Most certainly not.
2. Yes, using a bootable CWR SD is the way to go.
3. Totally different. The Rootpack is the name given to a package that helps you root your Nook. CWR image is a recovery image. That means you can boot to this recovery utility and apply changes to you NC (like repairing stuff, making backups, etc.).
4. An image will adapt to the drive. If you have a 4GB SD and burn (dd) a 1GB image to it, your SD will suddenly present itself as a 1GB SD. If you format it with the right tool, your SD will be 4GB again. So don't panick, if it says 1GB after burning, it's jut "adapted to the image". You haven't lost any disk space.
5. 1GB would be enough, but you can go up to 4GB image with a 4GB.. It could sometimes be a problem to apply an image which is the exact same size as the drive. I would use th 1GB, which is plenty for what you are going to do.
6. That's up to you. Both should work.
7. Yes.
8. Just read threads exhaustively before attempting anything..
So what you need to do is read threads about this CWR Bootable img to learn how to burn it to your SD.
Then, find the appropriate .zip files to flash (apply) (1.1 recovery and 1.0.1 are available in dev section.
Copy them to root of SD.
Boot with the SD Card and apply zip files from SD.
If your NC should still have problems booting, you can also apply a boot repair zip file, that you will find on my Nook Color restore to stock tread in dev..
Sam
His Rootpack wont work on 1.1.0 You should have seen that in his instructions. It will only block 1.1.0 and fake it. You need to see this thread to fix your nook. It is 100% NOT bricked, just messed up atm. You can fix it tho. Read here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for thr quick reponse Sam. I'm at work now, but will be able to use your suggestions later this afternoon\tonight. So, if I get a 1gb CWR image on my 4gb sd card, plus the 1.1.0 zip file and put it in the root of the sd card, the Nook should boot up even though I can't turn it on now? How long typacally will it take to boot up? What should I expect to see?
I will post results after I try the procedure. Thanks again!!
Thanks Thiboi69. I have printed out the instructions from the link you sent and will follow them to the T. I'll post results later.
It will work. I have never heard of a 100%bricked NookColor to date. And I have read 1,000's of posts here over the past 4 months. IT is just your boot partition that is messed up and B&N made it check the sdcard first for a Boot partition, then fall back to eMMC. Thank you B&N !!!
I downloaded all the files, wrote them to my sd card, and put it in the Nook. When I connected the Nook to my pc, I got a messaage the the battery was too low to turn on. So, I took the sd card out, and put the Nook on charge. After a while, it turned on, booted up and when I checked my OS, I found that I had
version 1.1.0. Apparently, my attempt to root with autonooter 3, never got installed, partially or completely. And, my battery probably got to low to turn the nook on. So, I didn't need to use CWR after all. I apologize to all who have tried to help me. But, all replies were good and contained useful info.
Now, my question is: Should I try to use Autonooter 3 again, or is there an easier
(more foolproof) way to root v1.1.0?
I just got a nook last night with the sole intention of hacking it - and did so in a matter of minutes. Autonooter couldnt be easier! When you get to the part of putting the SD card in the nook and connecting it to USB to make it boot, just plug it in and go get a cup of coffee. Don't unplug or touch anything until it boots up by itself. At 1st I thought it wasn't doing anything as I didn't see a clockwork mod screen come up or anything, but just be patient and it'll tell you when it's done. Just make sure it's pretty well charged when you do it - mine was about 80% or so.
Honestly after less than a day of the rooted stock 2.1 Eclair OS, I'm ready to drop a fully customized Froyo or Gingerbread image on this thing. Autonooter it 1st and run it for a few days 1st and see what you think. I'm still learning the ins and outs of tinkering with this thing, but so far it seems much easier than the Epic and Moment I've been beating on. Seems pretty well unbrickable too thanks to the boot to SD 1st option B&N baked into this puppy.
jostarr said:
I was reading this thread [RECOVERY] Monster RootPack 0.7 / Clockwork Recovery 3.0.0.5 SD (1.1 Compatible!). But, since I am new to this forum I couldn't post there. I hope this is the right place to ask for help.
I upgraded my NC to 1.1.0 successfully. I put Autonooter 3.0.0 on a MicroSD card. With my NC off, I inserted the card and then plugged the NC into my PC. I got a black screen for over 5 minutes. It looked like nothing was happening, so, I disconnected the NC, removed the SD card and tired to turn the NC on. No joy, it won't turn on and won't boot at all. I think my Nook is bricked. Any ideas what went wrong?
I've read some other threads about similar problems. It seems there is a fix to get it back to stock (1.1.0). I hope the Recovery thread I mentioned above is where the answer lies. But, I'm a bit confused and don't want to make any more mistakes. I only have one 4GB SD card at my disposal right now.
My questions are as follows:
1. Is my NC bricked beyond hope of recovery?
2. If I follow the procedures in this post can I get it to boot from the sd card even though it won't turn on at all?
3. What is the difference between the Rootpack and the Clockwork Recovery Image?
4. This is the confusing part. Should I download the RootPack? Or, should I download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb)
5. Since I only have a 4GB card, what should I choose?
6. Should I opt for 1.0.1, or 1.1.0 where it was still working.
7. Can I get all of this on one 4GB card?
8. Is there anything else I should be weary of before starting this procedure?
If i have posted this in the wrong place, I am sorry. But, I hope someone can clear things up for me. Thanks.
Click to expand...
Click to collapse
Joe, I would recommend downloading the 1gb rootpack image and a restore to stock file. Make your bootable clockwork recovery image, place the resotre to stock file on the sdcard, turn your nook off, insert the sdcard, power on and flash the file. All this info and more can be found in my thread here:
http://forum.xda-developers.com/showthread.php?t=949699
Thanks for your suggestion Riley, please take a look at my post # 7 above. Seemd my NC
had a low battery. When I charged it, all was ok. It booted up and I was back in 1.1.0.
But, I just now tried autonooter 3.0.0 again. When I pluged thr NC inyo my PC, I got some sort or warning message. I hit cancel and waited a few minutes. The message came up again. It said the device was not recognized. I unplugged, removed the card, and my fully charged NV won't turn on. And, windows explorer can not read the sd card. This is basically what happened yesterday to cause my panic. The sd card had all the files befor I inserted it into the NC. Now, it's unreadable and I can't turn on or boot the NC again.
Is it autonooter 3.0.0, or the card, or the Nook, or me?????
One correction to post # 10. I can read the sd card in windows explorer. But my NC won't turn on.
With sd card out of the Nook, I get a "Welcome to the Found New Hardware Wizzard"
What does this tell anyone about the condition of my Nook?
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Sent from my ADR6300 using XDA App
You can put the rom image to a separate SD card. Just swap it after you boot up from cwr. I did it before for flashing froyo to emmc.
Sent from my PC36100 using XDA App
72chevy2k2 said:
I am having a problem and don't really know what to do. When I start my NC its stops at the N screen and goes no further. I've tried a lot of the different ways to get it back to stock with no luck. When I try to write CWM to my SD card with win32 it either doesn't have enough room to put the stock file on the zip with it or when I open the SD card it says the card needs to be formatted. The file is a tr.gz or something like that is there a step between that I am missing or just download the CWM and write to SD using win32? I also tried adb with no luck. I am very new to rooting so any super dumbed down instructions would be greatly appreciated.
Click to expand...
Click to collapse
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Just a noobish advise!
After configure everything and become accustomed to some of the NC behaviors this should not matter, but I remember at my first attempts at rooting the NC, using a Win7 PC was much easier than using Win XP or iOS devices. Might fix your 'not recognized' problems, sd card recognition and formatting problems etc.
It has CWM on it. I can get it to recovery but it will not recognize the SD or not mount it and I go to mount it in the menu and it says something like can not mount SD card so I have been trying to do the CWM SD burn but I keep getting the above errors I am on a vista computer so I will try it on my windows 7 one and see how that goes. And the different SD card one I will try that as well after work thank you for the help.
Sent from my ADR6300 using XDA App
RickOSidhe said:
Have you followed the restore-to-stock procedure outlined in this thread?
http://forum.xda-developers.com/showthread.php?t=914690
Click to expand...
Click to collapse
Yes I did try that one I put the nookie froyo on the SD and put it I'm my turned off NC and plugged it in to my computer and it sat at the N screen forever and after a while I took it off and it was still in the same state could the CWM be the problem?
Sent from my ADR6300 using XDA App
I'm not sure what posts 13 thru 18 have to do with my problem???
Just didn't feel like starting a new thread for the couple of questions I had along the same line as yours.
Sent from my ADR6300 using XDA App
I don't know where to turn. I started a thread about my effed up nook but it got deleted (my fault) I'm completely at my wits end here. I had NookFroyo .68 working just fine on mine but like an IDIOT I thought it would be neat to try out CM7. Big mistake would not get past the animated N screen no matter what. I got the SD version of the Customized Nook Froyo to boot up but its very slow and stuff doesn't work. How do I get a ROM back on the eMMC? Some one suggested I get CWR and a ROM on the card and flash it via CWR off the card onto the eMMC. How exactly do I do this? I CANNOT get the winimage method to work no matter what I do and I don't know WHAT I'm doing wrong. Everytime I direct winimage to the place I've downloaded an image to, theres nothing there....
I thought I ALMOST had it a few minutes ago. I can get the CWR to come up and I flashed the flashable eMMC NF. I got my hopes up as it started to boot BUT OF COURSE NOT - went into a boot loop, constantly doing the N screen over and over. WTF.
I'm desperate here. I'm at the point where I'm willing to pay someone a small fee to help me get this sorted out. I'm going to keep on trying....
on win image, when you go to select the file. you must change the file types it see's to everything. that will let you see the .img file you downloaded.
We are talking about Win32disk imager right? It only gives the *img selection.
KDOG2020 said:
We are talking about Win32disk imager right? It only gives the *img selection.
Click to expand...
Click to collapse
click the arrow and hit ALL FILES
I AM clicking the arrow, there is ONLY *img....
I've heard of an 8 boot reset. How does that work?
I'm reading the "Recovery" thread. Should I do the "repartiion" zip file? I'm starting to think that maybe the problem...
EDIT: Tried the Repartion.zip. No change. Still continously reboots.
I just tried the Nook restore file and it still gets hung up on a different N screen (the Nook symbol). What in the HECK! It wont' go into CWR anymore, says there isn't any room on the card. AN 8GB CARD!!!! I put the card back in the computer and it says its only 115MB! WHAT THE HELL IS GOING ON HERE.
EDIT X2: LOOKS LIKE I GOT IT BACK TO STOCK. WHEW! Now I can start over! Tomorrow after I rest a bit. LOL
KDOG2020 said:
I just tried the Nook restore file and it still gets hung up on a different N screen (the Nook symbol). What in the HECK! It wont' go into CWR anymore, says there isn't any room on the card. AN 8GB CARD!!!! I put the card back in the computer and it says its only 115MB! WHAT THE HELL IS GOING ON HERE.
EDIT X2: LOOKS LIKE I GOT IT BACK TO STOCK. WHEW! Now I can start over! Tomorrow after I rest a bit. LOL
Click to expand...
Click to collapse
This will allow you to get the card back to showing 8gb:
http://www.sdcard.org/consumers/formatter_3/
Hi,
I found this post (in developers/cm7 users thread) very useful for installing
CM7:
http://forum.xda-developers.com/showpost.php?p=11535969&postcount=151
It is a little dated (weeks) but very detailed and should hopefully still all work fine.
Some more general information on:
http://nookdevs.com/Portal:NookColor
I find that I never have enough uSD cards to use - so make sure that
you have several spare. The emmc Androids are still in general expecting
an external SD card for storing data such as ebooks etc. and CWM will
backup to the external cards too.
CM7 and Froyo use different disk format types for various partitions, don't know,
but that may be part of your problem?
Your PC won't normally read some of the linux partitions on the SD card
either - hence only 115MB showing. This is the boot partition, formatted with
FAT32 (a PC related format) In general you don't need to reformat this partition,
just update or change some of the files. (Some of the names of formats used include:
FAT32, EXT3 and EXT4)
CM7/17 and CM7/19 Have both been very stable and easy to use for me. I switched
to CM7 from Froyo 6.8 a week or so ago.
Good luck, the Color Nook is a fun device!
Peter
Thanks all I appreciate the help. I used some HP utility to take care of the cards, worked great.
Ok I've got a NF .68 up and running. Titanium backup worked beautifully. SetCPU is running it at 1.1 interactive..... HOWEVER!....
I flashed it with a another version of the CWM flashable .68 NF that I had previously. I tried to reflash the other version and it went to install then stated "Installation aborted". I tried twice and got the same thing. I guess its no big deal since their the same version just this one thats on there had some more tweaks hence the title "Customized".
My question is why did it do that? My guess I was supposed to format or clear the data/system/caches' in CWR. Is that right? If so, which ones precisly do I clear or format before flashing a new ROM? I'm starting to think thats' what happened when I tried to load CM7 (Yes I had CWR 3010) and go me all borked to begin with....
And if someone would like to answer a quick question. What this EXT4 stuff and how does it pertain to flashing ROMs? Thanks guys... Your advice got me back up and running!
KDOG2020 said:
Ok I've got a NF .68 up and running. Titanium backup worked beautifully. SetCPU is running it at 1.1 interactive..... HOWEVER!....
I flashed it with a another version of the CWM flashable .68 NF that I had previously. I tried to reflash the other version and it went to install then stated "Installation aborted". I tried twice and got the same thing. I guess its no big deal since their the same version just this one thats on there had some more tweaks hence the title "Customized".
My question is why did it do that? My guess I was supposed to format or clear the data/system/caches' in CWR. Is that right? If so, which ones precisly do I clear or format before flashing a new ROM? I'm starting to think thats' what happened when I tried to load CM7 (Yes I had CWR 3010) and go me all borked to begin with....
And if someone would like to answer a quick question. What this EXT4 stuff and how does it pertain to flashing ROMs? Thanks guys... Your advice got me back up and running!
Click to expand...
Click to collapse
Always format /system, /data, and /cache. Whatever you do DO NOT format /boot.
As to why you may have had an issue on trying the other ROM. My guess is it has to do with what version of CWR you had been using and wha twas on the device prior to flashing it. I've found if you make say a nandroid backup using 3.0.0.6 or earlier, and are currently using CWR 3.0.1.0 they don't mix well. And I think it has to do with the fact the older CWR version only supported ext3, and the newer one has ext3 and ext4 support. So once you install a ROM using CWR 3.0.1.0 that uses ext4, and then you try to go back to a ROM that is ext3 it just doens't work out like planned.
That all said I not longer flash CWR to eMMC, and I have a bootable sdcard running 3.0.1.0 with all my current and old backup files. Make life much much easier IMO seeing as you can always boot to an sdcard, and all backups are in the correct format and will Restore just fine.
Thanks for the info! I'm sure that will make trying to upgrade to CM7 actually work! LOL!
But first can someone explain to me what this EXT3/4 stuff is?
Different filesystems for Linux/Android. Wikipedia has pages for each if you want google them and get too much info
Too much info? No thanks! As you can see I can barely handle the info I'm getting now!
I'm a noob with not enough privilages to post over in the developer's forum, so posting here.
I've successfully imaged and booted to CM7 using verygreen's project:
http://forum.xda-developers.com/showthread.php?t=1000957
Next step was to try adding/installing gapps and using recover. I've tried a few different times doing a few different things, but all end up rebooting (with SD in the NC) to the original boot of the NC, as if out of the box. I get the hand going over to the android and having to "Set Language" and wifi.
Not sure what I'm doing wrong and it looks like others got it to work.
Any help?
Have you actually booted into CM7? The nook boots first to the SD card, so if you can't boot now into CM7 that means that something has changed on the SD card. In other words, on boot the nook looks for something useful (like a bootable OS) on the card and if it can't find it boots to internal (original B&N OS).
So, do a normal power up and see if you boot into CM7 on the sd card. If so, see below about booting in recovery (once you've added the google files). If not, something's amiss with the image on the card.
YOu may be having a problem booting into recovery -- this is pretty common. It can be tricky timing the release of the buttons. Follow the directions on verygreen's post carefully. Push the N button first, then power, count off about 6 seconds and make sure that you see the message before releasing. Took me a few tries to get the recovery screen instead of booting normally.
I can tell you that I've done this a few times and it does indeed work. The only tricky part is timing to button thing when booting into recovery.
Yep, I did boot into CM7... The wallpaper changed and there were new icons, of which I can't remember at the moment.
I know what you are saying about entering recovery mode... I think I got that set. I can see when entering recovery mode, as the penquin icon is shown and then all the messages come up, including expanding the zip files.
My problem is getting the gapps included. I've tried just copying over the gapps zip file and do recovery with that. I've tried copying both the CM7 nightly and the gapps zips and do recovery. I also noticed the instructions:
•Get u-boot.zip file from attachment in this post: http://forum.xda-developers.com/show...&postcount=153
•Unpack the u-boot.bin file and put it onto parttion 1 of the SD card instead of the one there.
•Rename file named uRecImage on the first partition to uRecImg (doh!)
•Get this uRamdisk file, rename it to uRecRam and then put the result to the 1st partition on the uSD card instead of the file with the same name there
I've also done that... still boots to as if it is a brand new, out of the box Nook. I take it that means the SD is messed up. So I'm doing something wrong in how to get the gapps on.
Sounds like the easiest way for you is to start over.
Re-image your card with verygreen's 1.1 from the beginning of his post.
Then download the version of CM7 you want (verygreen's or rc4 or whatever)
add this .zip to the sd card, download gapps and also add this to the sd card.
Insert into nook and boot.
You have to put these zips on the sd card BEFORE you boot into CM7 the first time. This is why you have to re-image.
This is what I did and everything worked great. Skip the gapps login until you have wifi setup of course and everything should be fine.
Yup, sounds like danbutter has it right. I know how frustrating this is, but it really is worth it.
You may have problems prepping your SD card to re-image because of partitioning. One way to start with a really clean slate is to download Paragon Partition Manager (the free addition) and totally wipe all the existing partitions. Windows disk manager won't do it.
robedney said:
You may have problems prepping your SD card to re-image because of partitioning. One way to start with a really clean slate is to download Paragon Partition Manager (the free addition) and totally wipe all the existing partitions. Windows disk manager won't do it.
Click to expand...
Click to collapse
I don't know exactly what it is with this, but I have never had this issue and I have re flashed a couple sd cards many many times playing with this and all I have ever done was select the new image and write it to the card.
Is this something to do with certain card readers or what?
I'm using a five year old HP laptop and its built in card reader.
Just curious
Please do not quote this message. When information in this message changes, I can change this message, but not the quoted copies.
As many of you know, the newer Nook Colors come with a partitioning that allows 5GB of space (/data -- ext3 partition) for apps and B&N books/etc, and 1GB of space (/media -- FAT32 patition) for user side-loaded content. The older Nooks had the reverse: 1GB for /data, and 5GB for /media.
I first documented a manual process for reverting the newer B&N partitioning back to the old partitioning, here: http://forum.xda-developers.com/showpost.php?p=13971291&postcount=110 Upon several requests, I have automated it here: http://forum.xda-developers.com/showpost.php?p=14047474&postcount=129
Someone in that thread requested that I repost the information here, so that it could be "pinned". Therefore, I have reproduced and expanded that information here (I now regard the above thread as dead for this purpose).
Caveats:
You must have ClockworkRecovery installed on the Nook Color, or on a bootable SD card which accesses the Nook.
You must backup everything you wish to save, or archive it on the B&N site, because this will clear all your data on the device:
/data partition (0p6)
/cache partition (0p7)
/media partition (0p8)
The following partitions will not be touched:
/boot partition (0p1)
/rom (configuration) partition (0p2)
(hidden) recovery partition (0p3)
/system (whichever operating system you have) partition (0p5)
If you have added additional partitions (eg, via "internal dual boot": http://forum.xda-developers.com/showthread.php?t=959461 -- unlikely, given an existing 5GB/data partition), you must uninstall/remove them first.
The usual non-warranties apply.
The following are installed in the usual manner using ClockworkRecovery installs.
Download and copy to an SDcard, ONE of the following repartitioning install packages:
To use B&N v1.1 "old" 1GB "/data", 5+GB "/media" partitioning: http://www.mailpen.com/download/nook/repartition1GBdata-v1.zip
To use custom 1.96GB "/data", 4+GB "/media" partitioning: http://www.mailpen.com/download/nook/repartition2GBdata-v1.zip
To use B&N v1.2 "new" 5+GB "/data", 1GB "/media" partitioning: http://www.mailpen.com/download/nook/repartition5GBdata-v1.zip
Also download and copy to an SDcard, the following install package: http://www.mailpen.com/download/nook/reformatData-v1.zip
Boot into ClockworkRecovery with the above SDcard inserted in the Nook Color.
Install the repartition package from the SDcard, to repartition /data (0p6), /cache (0p7), and /media (0p8).
Mandatory REBOOT into ClockworkRecovery.
Install the reformat package from the SDcard, to reformat (and clear) /data (0p6), /cache (0p7), and /media (0p8).
If you backed up the B&N "/data" partition, then you should be able to restore and continue without reregistering, but don't count on it (you may have to reregister).
Hi DeanGibson, so you're basically indicating that by following this guide I won't have any problem rooting the new NC currently being sold?
I ask this because by reading different threads previously I had the impression that it's wasn't very clear if there would be issues or not with the new models.
I'm planning to buy a new one and this can make a big difference (going to another tablet brand or buying a new NC) if I'm confident that I'd be able to root it.
Thanks in advance.
Imho this should be made sticky in order to avoid confusion of new NC owners. Also it has been reported to work great. I will rely on this as soon as my NC finally gets delivered. Cheers!
Sent from my Nexus S using Tapatalk
Read carefully ...
limaunion said:
Hi DeanGibson, so you're basically indicating that by following this guide I won't have any problem rooting the new NC currently being sold?
Click to expand...
Click to collapse
The above repartitioning does not root the NC. In fact, you must have either:
rooted the NC first, and then installed "RomManager" (which requires root privileges and includes ClockworkRecovery) before doing the repartitioning; or
have an external SDcard which accomplishes the same thing.
This thread does not document that process; there are many other threads that do so.
The process I document is designed for the new models.
There was at least one report of a B&N staff member saying they can repartition new NCs to the old set-up if requested. Can anyone confirm it?
Taosaur said:
There was at least one report of a B&N staff member saying they can repartition new NCs to the old set-up if requested. Can anyone confirm it?
Click to expand...
Click to collapse
I've heard this, waiting for someone or people to confirm it.
And waiting, and waiting ...
Taosaur said:
There was at least one report of a B&N staff member saying they can repartition new NCs to the old set-up if requested. Can anyone confirm it?
Click to expand...
Click to collapse
This was suggested by one person:
http://bookclubs.barnesandnoble.com...ly-Change-to-the-NOOKcolor/m-p/1031812#M45946
Hardly a definitive statement, which was denied two posts later by a B&N store employee.
Well, having dealt with customer service (or tech support, actually), I suppose I would take the store employee's word over the alleged phone conversation :/ Pretty sure I saw someone on XDA saying they'd heard the same thing from a store employee, but again it's all what-ifs and hearsay--I haven't seen anyone say, "I went to B&N and they repartitioned my device," or "I went to B&N and they would not repartition my device."
I can confirm this method has worked for me on my NC. I also did a restore of my ManualNooter'd backup after running the second formatter zip. B&N settings menus shows that the available sideload storage is at 5.23GB.
I'm going to see if I can now properly load a Cyanogen build onto my NC's eMMC that will actually fully boot now.
Thanks a ton!
Edit: It took! I just got Cyanogen to flash to the eMMC for the first time successfully since I first got my Nook. Clockwork is also no longer complaining about dealing with /data any longer either. Kudos!
I have an unopened 2011 series, blue-dotted nook. Several hours ago, after reading the post about repartitioning at the store, I went to the Barnes and Noble where it was purchased and was assured, emphatically, that the Nook CANNOT be repartitioned at the store to the older partition scheme.
Off I went to Wal-Mart and purchased a 2010 series Nook (no blue dot). Wal-Mart had some of both series in stock.
One of the Nooks must be returned. I'm actually buying the Nook to play around with rooting, but have never rooted a Nook. So I guess starting with the old partitioning would be wiser for a beginner? I can't actually open it to verify what's on the 2010 series Nook for another week (gift).
xdavisitor said:
I have an unopened 2011 series, blue-dotted nook. Several hours ago, after reading the post about repartitioning at the store, I went to the Barnes and Noble where it was purchased and was assured, emphatically, that the Nook CANNOT be repartitioned at the store to the older partition scheme.
Off I went to Wal-Mart and purchased a 2010 series Nook (no blue dot). Wal-Mart had some of both series in stock.
One of the Nooks must be returned. I'm actually buying the Nook to play around with rooting, but have never rooted a Nook. So I guess starting with the old partitioning would be wiser for a beginner? I can't actually open it to verify what's on the 2010 series Nook for another week (gift).
Click to expand...
Click to collapse
rooting (emmc) the original partition NookColor is very simple to do . BTW both versions can run on SD roms.
thank you DeanGibson, I will try this on a refurb NC I just bought.
Thank you, Merchant -- I'll definitely start with SD rom method, keeping the original partition Nook for my second foray.
Wiser... perhaps. But where is your sense of ADVENTURE!
dear all.. for this step..
"You must have ClockworkRecovery installed on the Nook, or on an SD card which accesses the Nook."
just follow this thread?
h t t p://forum.xda-developers.com/showthread.php?t=896682
anyway, thanks dean for the effort!
darthnerd said:
dear all.. for this step..
"You must have ClockworkRecovery installed on the Nook, or on an SD card which accesses the Nook."
just follow this thread?
h t t p://forum.xda-developers.com/showthread.php?t=896682
anyway, thanks dean for the effort!
Click to expand...
Click to collapse
Copied this from "eyeballer"
1. Download a CWM 3.0.2.8 sdcard image from this thread (credit: to cmstlist and DizzyDen). You really only need the 1gb image for this guide, no matter what the size of your card is. A smaller image will burn faster, and when you're done with the guide you can reformat the card anyway.
2. Extract the clockworkmod .img (if you can't open the file use 7zip)and burn to sdcard in Windows PC using win32diskimager (free) or winimage (shareware).
wpbear said:
Copied this from "eyeballer"
1. Download a CWM 3.0.2.8 sdcard image from this thread (credit: to cmstlist and DizzyDen). You really only need the 1gb image for this guide, no matter what the size of your card is. A smaller image will burn faster, and when you're done with the guide you can reformat the card anyway.
2. Extract the clockworkmod .img (if you can't open the file use 7zip)and burn to sdcard in Windows PC using win32diskimager (free) or winimage (shareware).
Click to expand...
Click to collapse
thanks for the info man!
So I presume that i will use 1gb_clockwork-3.0.2.8.rar since I am using a 1gb card?
darthnerd said:
thanks for the info man!
So I presume that i will use 1gb_clockwork-3.0.2.8.rar since I am using a 1gb card?
Click to expand...
Click to collapse
Yes but mostly because it is faster and you will only leave the sdcard bootable with CWM for a short time anyway.
dear all,
Thanks for the help given..
now i see 5.23GB under available storage!
I would be very interested in the 1.96GB /data option!
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Never heard of unooter and I've been reading theses forums since December. Auto mooter was to root the older firmware 1.0 ,1.01,and 1.1. Manualnooter is for the newer froyo firmware.
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
martian21 said:
Rooting stock is not required to install CM7.
You simply need to create a Clockworkmod recovery microSD card and you can then flash CM7 (which is pre-rooted) from Clockworkmod.
Click to expand...
Click to collapse
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
xdp said:
Thanks. I figured this would be relatively easy compared to rooting and putting CM7 on my EVO but reading on here there seemed to be a few different approaches. Will that method allow me to flash CM7 to the eMMC, and after that point will I no longer need the SD card to boot? I ask because I don't have a card on hand and am considering backing up the contents from my phone's card and using that.
Click to expand...
Click to collapse
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Nburnes said:
Correct.
You only need the SD to install a bootable CWM then you can flash CM7 from that. After words when CM7 is installed to eMMC you are able to use Rom Manager to install CWM to eMMC as well, so everything will be set up on the device's internal memory. SD is needed only for the initial boot of CWM to install CM7.
Click to expand...
Click to collapse
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Sent from my NookColor using XDA App
Click to expand...
Click to collapse
Transcend 8 GBs have worked beautifully on all 3 NC's in my house.
xdp said:
I just got my Nook Color and am looking into how to go about rooting it for CM7. I checked out CM's Wiki page on it here and it mentioned using uNooter. I haven't read about this tool anywhere else and Google searches for it turn up practically nothing. Is this not the right tool to use? The forums mostly seem to mention ManualNooter, Auto-Nooter, etc. Also is it possible to flash CM7 on the internal memory and avoid using an SD card altogether?
Click to expand...
Click to collapse
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
martian21 said:
The general consensus it's to stick with Sandisk SD cards for the Nook. There are others that work as well but Sandisk it's pretty much a guarantee of zero issues. You can usually score an 8 GB class 4 Sandisk at Wal-mart for a Jackson.
Click to expand...
Click to collapse
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
xdp said:
Thanks. From reading around it seems you can't use a phone or the Nook to mount the card and write the image, so I'll have to buy a reader and might as well get a card for the Nook at the same time. Since I'll be flashing CM7 to eMMC does it really matter if I get a class 4 or above card like many suggest? I'm not sure what's in my EVO but that is my benchmark. Class 2 seems to be what comes up in searches the most.
Click to expand...
Click to collapse
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
GMPOWER said:
I was the one that put together uNooter after being contacted by the individual that maintains the CyanogenMod wiki. They wanted a universal Nooter that would only root the device, install Superuser, ADB, RomManger, and work on all versions of the NC software. They asked that it be called uNooter. It is not released anywhere else, so that is why you did not see any mention of it on a Google search.
Click to expand...
Click to collapse
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Taosaur said:
That information is really only relevant to running a ROM from the SD card. If you're only using the card for storage, or to get CM7 on eMMC, manufacturer and card class don't matter.
I wrote my image over USB to a card in the NC without a card reader. I've seen wiki guides saying there's a greater chance of the write getting interrupted, rendering the card unusable at least in the short term, but it worked for me. It was only when I wanted to revert the card to storage that I ended up needing a card reader. The links in my sig have a little more info about using the NC as your card reader, but you're probably better off just grabbing one.
Also, while CM7 does not require an SD card, many apps do. Your experience will be somewhat limited without one.
Click to expand...
Click to collapse
Yeah, I thought about this as well and figured I'd want a full-time card for the device so I ordered a card with SD adapter. I figured the specs didn't matter at all for a data card but picked up a class 4 Sandisk anyway.
xdp said:
Great to hear directly from the source, thanks! I'm surprised more people don't point to your tool on the forums given that it's right on the CM Wiki. At this point I'm a little confused about the various approaches to do this. Does your tool install ROM Manager directly into the stock Nook interface, and then I flash from there, versus booting CWM off the SD as people mentioned earlier in the thread? Sorry if that's completely off-base.
Click to expand...
Click to collapse
I received notice this past Monday that the cleaned up version of the CyanogenMod wiki was online, so not a whole lot of exposure for people to talk about it. I believe the old wiki had listed the different Auto-Nooter and Manual-Nooter that went with each software version, thus taking up a lot of space and confusion. AN and MN are more tailored to people that want to stick with the stock software, but enable full Android Market access. People that want to go from stock to CyanogenMod don’t need all the extra software that is bundled with AN and MN just to be able to flash CyanogenMod. By eliminating all the version specific software I was able to create a version that would work on all current, and hopefully future, software versions.
Yes, my versions will install Rom Manager directly into the interface. You would then allow Rom Manger to install CWM Recovery, and then you can download and install CyanogenMod from the device. You could also take a full backup of your current stock rom. Using uNooter or bootable CWM will both get you to where you want to go, it is really up to you on how you want to get there.
Instructions for installing CM7 to the eMMC using CWM on a SD card (which can later be reformatted for storage) is in this thread: http://forum.xda-developers.com/showthread.php?t=1030227.
GMPOWER and bigbob23: Thanks for the info, that was exactly what I needed to clear everything up. I suppose backing up the stock ROM would be useful in case I ever needed to restore it for warranty purposes or anything. I'm not sure which approach I'll go with, my SD card came today so I'll be reading over both techniques and giving one a shot!
Thanks again.
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
xdp said:
I went through the process with uNooter as outlined on the CM Wiki and it went perfectly. The only thing was I had to use SD Formatter and the earliest 0.1 version of Win32 Disk Imager to get the image to write to the SD card. Not sure if that problem is specific to Win7 64-bit but maybe I can mention it on the wiki.
Click to expand...
Click to collapse
I am glad that you got everything to work right. I think the problems that you might have experienced are more associated with win7 x64. My replacement laptop with win7 x64 will not be here for another two weeks for me to test it on, but in the past I have had to use Unlocker almost every time to unlock the usb drive before I could proceed with flashing using Win32 disk imager. On my current windows 7 x86 setup, I have yet had to use Unlocker to be able to flash an image with the win32 program. HERE is a post with people having problems in the past with win32 disk imager on win7 x64, they took the same path that you did with Panasonic SD Card Formatter to fix it.
uNooter
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
AF9210 said:
I guess this worked for the latest firmware of 1.2.0? (I am about to root one soon!) thanks in advance!)
Click to expand...
Click to collapse
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
xdp said:
I just got my nook last week so I'm assuming I had the latest factory firmware when rooting, but I didn't check.
Click to expand...
Click to collapse
If you see "Read Forever" when booting (stock) then "Yes" you have the latest firmware.
ADB after uNooter?
Above, GMPOWER mentioned ADB as one of the items uNooter installed. I've rooted with uNooter in part because *nothing* *else* I could find would actually boot on my NC and in part because I liked the idea of a relatively minimal root. I figured I could then push any apk's I wanted to add with adb.
Unfortunately, that doesn't seem to be working. I used "NookColor Tools -> All Settings -> Development" to enable USB debugging, but 'adb devices' shows nothing. If I plug in my G2 with CM7, adb finds it just fine, so I'm pretty sure I've got the computer side of things working. Any hints about getting the NC to play nice?