Related
I seem to get a longer battery life (first step down from 100%) if I charge my MDA C4 using the supplied charger as opposed to a charge from a PC using the USB lead.
If I charge using the charger, and just use 2G, I get approx 14 hours before the first drop in the batterymeter. From the PC it happens well before 11 hours.
Is this possible or am I just imagining things?
tmohammad said:
I seem to get a longer battery life (first step down from 100%) if I charge my MDA C4 using the supplied charger as opposed to a charge from a PC using the USB lead.
If I charge using the charger, and just use 2G, I get approx 14 hours before the first drop in the batterymeter. From the PC it happens well before 11 hours.
Is this possible or am I just imagining things?
Click to expand...
Click to collapse
To get full capacity phone needs 5v 1000mA (= 1A) input, which is the charger outputs. If the PC USB output cannot pump that amount it might last shorter....
a PC's standard USB port only outputs 500mA (0.5A)
i think the supplied charger may be 2A (cant check atm), i know the official HTC Car Charger is 2A.
Cheers,
mugglesquop said:
a PC's standard USB port only outputs 500mA (0.5A)
i think the supplied charger may be 2A (cant check atm), i know the official HTC Car Charger is 2A.
Cheers,
Click to expand...
Click to collapse
My original HTC charger (Model: TC P300) outputs 5v 1A
Interesting. I'll check the HTC charger when I get home.
However, Would this not mean that it would just take longer to charge the battery?
(Analagous to having to fill a bucket of water from a 1/2" bore pipe as opposed to a 1" bore pipe).
Artyaw said:
My original HTC charger (Model: TC P300) outputs 5v 1A
Click to expand...
Click to collapse
My original HTC charger is at 5V 2A.
What I did notice is that charging form USB takes much longer than charging off the wall.
Sergio PC said:
What I did notice is that charging form USB takes much longer than charging off the wall.
Click to expand...
Click to collapse
It will do, should not effect the overall charge (as long as it is left long enough!)
tmohammad said:
(Analagous to having to fill a bucket of water from a 1/2" bore pipe as opposed to a 1" bore pipe).
Click to expand...
Click to collapse
Correct, actually water analogy is quite often used here
yes i thought that...
phone charge lasted longer with the mains charger than the usb on pc
and usb pc takes ages to charge full
So I guess we'll all be using our wall chargers now? As the charge is faster and some believe better!
Make no sense to me as to why the charge of the PCs USB cable is not as good as from the wall....
However the slow charge time bit of it makes sense
Car Charger
I have huge problem with my car charger. I use Noname USB car charger, that worked perfectly with my Trinity. Now, when i connect my Diamond it sometimes connects and disconnects the device to USB twice in two seconds and so if the battery is low message about battery fklashes in an out. SOmetimes it does not happen and the battery is charging normally. When i start IGO8 while battery is full and Diamond being charged, it sometimes LOOSES power and after couple of hours it gets out of power even when charged. Sometimes it doesnt happen and the device is charging properly, but very very slowly. When i turn device off, it charges normally. I tried two different chargers and get the same results. But none was HTC original.
It's irrelevent how the phone was charged. If the battery is full, then its full ,and it will last the same period of time irrespective of how it was charged.
Charging rates will vary depending on input current, but once the touch sensor light stays on, then the battery is full.
I got the 16GB Touchpad few days ago and since i got the one with an american charger i cant charge it yet (till i get the traveler kit).
My actual problem is that it doesn't charge through the USB port too. I left it for like 24-30 hours charging through the USB port (with the cable that came with the touchpad) and when i try to turn it on, it shows me an icon of an empty battery.
Is my usb cable problematic or it just that the touchpad cant charge through the usb port from a PC?
ps: every time i plug the usb it get a message telling "to reliably charge please use the charger and cable that came with this device"
I have the same issue with a 32 GB one. I received it brand new, factory sealed today and it is going back to HP. I called HP, the cable is fine, works with my HTC phone, it's the USB port on the Touchpad, it's loose and losses connection. HP is sending a box with prepaid shipping label and doing a warranty repair.
I really love the Touchpad and I am a bit disappointed with receiving a new device with a loose USB port. HP has great support and I can't wait until I get it back.
Sent from my HTC Sensation 4G using Tapatalk
Unfortunately thats not an option for me (returning it to touchpad), since i bought it from Ebay (thats the only way possible for me to buy a touchpad from my country).
You had the same issue with the charger plugged in the usb cable as well?
What sort of power source do you use, if not the charger.
I've tried to use a computer, but it does not look like it's charging, but data transfer work.
I tried with an iphone charger, that sort of work. It complains about not getting enough power (iphone charger is 5,0V while the hp charger is 5,2V)
Bottom line. Use the original charger, just buy an us adapter. It works great.
There is another thread here sonewere discussing chargers for non US owners.
Sent from my M9 using Tapatalk
Jon (aka nle) said:
What sort of power source do you use, if not the charger.
I've tried to use a computer, but it does not look like it's charging, but data transfer work.
I tried with an iphone charger, that sort of work. It complains about not getting enough power (iphone charger is 5,0V while the hp charger is 5,2V)
Bottom line. Use the original charger, just buy an us adapter. It works great.
There is another thread here sonewere discussing chargers for non US owners.
Sent from my M9 using Tapatalk
Click to expand...
Click to collapse
Im trying to charge it through my PC using the original cable that was in the box (tried it in a USB 2.0 port) and im getting the 'try a reliable recharging source like the USB cable and the charger that came with your touchpad'.
I also tried charging it with a 5.0V 200mA phone charger but it didnt work either.
Shouldnt it charge even a bit with the cable? im trying to charge it for 2 days now
Varemenos said:
Unfortunately thats not an option for me (returning it to touchpad), since i bought it from Ebay (thats the only way possible for me to buy a touchpad from my country).
You had the same issue with the charger plugged in the usb cable as well?
Click to expand...
Click to collapse
Yes, tried the wall charger, then pc, a different usb cable, all had the same result. When I plugged in I could feel the USB port loose in the Touchpad itself, it had a bit of play and if I played gently on it, it would begin to charge or connect to the pc. When i let go, it disconnected from my pc and then gave me the charging error message. I purchased mine from an e bay store and it has a warranty for 1 year.
I would be happy to help you with yours, if you want to ship it to the US, it has a warranty from the factory. Pm me if you'd like help. I am certain that shipping to and.from US could be costly but I am willing to help.
Sent from my HTC Sensation 4G using Tapatalk
Mine will only will charge from official HP chargers. This is much like my old iPhone 3g before all the generic manufacturers caught up. I suspect that the voltage and amp requirements are tighter than the USB specification, so it will be a crap shoot if you use non HP chargers.
With that said, HP has 30% off all touchpad accessories right now. Combine it with the cupon SAVE15HP
-W
Sent from my I897 using XDA App
wpp105 said:
With that said, HP has 30% off all touchpad accessories right now. Combine it with the cupon SAVE15HP
Click to expand...
Click to collapse
Ya unfortunatelly i could order anything since i dont live in the US/UK regions
Varemenos said:
Ya unfortunatelly i could order anything since i dont live in the US/UK regions
Click to expand...
Click to collapse
Don't worry over that, I can get what you need and ship it to you.
Also, in speaking to HP, any USB charger in the US works, they're considered universal.
Sent from my HTC Sensation 4G using Tapatalk
you cant charge the touchpad using a computers usb ports. it doesnt draw enough power. the voltage of the charger doesnt really matter, it needs at least 2 amps or it wont charge the touchpad. cell phone chargers usually only draw 1 amp or less and usb ports only .5 amps.
cachookaman said:
you cant charge the touchpad using a computers usb ports. it doesnt draw enough power. the voltage of the charger doesnt really matter, it needs at least 2 amps or it wont charge the touchpad. cell phone chargers usually only draw 1 amp or less and usb ports only .5 amps.
Click to expand...
Click to collapse
That is absolutely not the case.
I have only charged mine once with the AC-USB thing and I have been using it since I got it the first day of the sale. I use mine all day long and only charge it occasionally via USB to PC connection. I use the original cable from HP and another one from my Samsung Mythic (work and home).
The message that you get when you plug it in is misleading but normal on a stock TP. However there is a patch in PreWare that changes it to just default to charge and not bug you. Anyone who intends to use this thing at all with WebOS needs to get PreWare installed. In fact, some time spent at precentral.net would benefit any new owners. You will learn A LOT more about these little jewels. I spent a few hours reading stickies and interesting threads and learned a great deal.
If it is really plugged in (and you will know because your PC will tell you) and you get no charge, you have a problem. It should charge on or off while plugged in - mine does.
nunjabusiness said:
That is absolutely not the case.
I have only charged mine once with the AC-USB thing and I have been using it since I got it the first day of the sale. I use mine all day long and only charge it occasionally via USB to PC connection. I use the original cable from HP and another one from my Samsung Mythic (work and home).
The message that you get when you plug it in is misleading but normal on a stock TP. However there is a patch in PreWare that changes it to just default to charge and not bug you. Anyone who intends to use this thing at all with WebOS needs to get PreWare installed. In fact, some time spent at precentral.net would benefit any new owners. You will learn A LOT more about these little jewels. I spent a few hours reading stickies and interesting threads and learned a great deal.
If it is really plugged in (and you will know because your PC will tell you) and you get no charge, you have a problem. It should charge on or off while plugged in - mine does.
Click to expand...
Click to collapse
The problem is, its plugged, i get the warning but its not charging at all (while the touchpad is turned out cause its out of battery the past 2 days).
Varemenos said:
The problem is, its plugged, i get the warning but its not charging at all (while the touchpad is turned out cause its out of battery the past 2 days).
Click to expand...
Click to collapse
Now to be completely honest - the first charge I made out of the box was with the AC adapter and I left it in overnight like I had been told.
But since then I have never used the AC plug and I have let it get down to about 20% or so but no lower.
It very well may be that from a DEAD state, it requires the extra amps to jump start it, but as long as you have that initial charge it is covered by the lower amperage of the direct USB-to-PC connection. I'm guessing it came with a fair charge and you burned through it without ever plugging it in to the USB.
Bear in mind that not ALL USB ports on a PC are powered the same either. Older USB 1.0 and 1.1 are crap for power. Front or top-mount ones also may not have as much juice as the ones in the back directly off the motherboard. Look at portable hard drives, some come with a double-header cable to use two low-powered ports. I know my top-mount ones will not power my 1TB 2.5-inch drive, but the ones in the back do.
However, I am really surprised you can't pick up a standard plug in USB adapter for your country for a few dollars (equivalent) for wall. Jeez they sell them at the dollar stores here now. I don't know if a car adapter would output enough to do it but that is another idea. If you can get one, you should be able to bring it back easily enough. The 2 amp adapter does charge a lot faster.
---------- Post added at 11:15 PM ---------- Previous post was at 10:53 PM ----------
LOL, I am really in a rare mood as this question has bugged me a little. So I decided to find some straight poop. Here is the best description I have seen anywhere.
http://www.maxim-ic.com/app-notes/index.mvp/id/3241
If you don't want to read it, the gist (as I understand it) is:
At 5V, the USB ports in a PC have to be able to source (provide) at least 500 mA (.5 AMP). However, depending on how your motherboard is provisioned (MOSFETs and diodes) that is limited/controlled.
The spec though, does allow as much as 5A to be provided. In fact, 2A is not uncommon if the other ports are not loaded.
So you could try unplugging all your other USB stuff or try another computer's USB ports.
Varemenos said:
Im trying to charge it through my PC using the original cable that was in the box (tried it in a USB 2.0 port) and im getting the 'try a reliable recharging source like the USB cable and the charger that came with your touchpad'.
I also tried charging it with a 5.0V 200mA phone charger but it didnt work either.
Shouldnt it charge even a bit with the cable? im trying to charge it for 2 days now
Click to expand...
Click to collapse
Given that the HP charger has a 2A output, odds are that anything much below around 500mA isn't going to charge the device, or at least not at a rate that'll offset the drain while it's running.
The USB ports on laptops often won't supply enough current, particularly if there's other devices on the same bus. If you plug it into a powered USB hub then you should be in business as they should supply more like around 1A generally.
My Touchpad charges from my laptop USB port, however it is slow. I am getting about 8 - 10% charge per hour. The screen needs to be off though, otherwise there is no noticable charging happening.
Mine is not charging with USB laptop at all. Need to use wall charger
I have XRON VB2.8 on my two touchpads and both show battery charging symbol when they are connected to computer via USB and yes the they charge very slow.
FYI, can't remember if WebOS / Govnah tells you what the current amps being used is, but if you are on Android tools like Elixir 2 tell you how many amps you are either discharging (-) or charging (+). So depending on what you are using (wifi, bluetooth, # of widgets, running applications, screen brightness, overclocking, underclocking, etc.) YMMV on whether or not you can charge via usb connected to your computer.
So if you are discharging at a rate of -750 mA connecting to a usb port on your computer will still have you discharging at a rate of -250:
Code:
[COLOR="Red"]-750 mA[/COLOR] + 500 mA = [COLOR="Red"]-250 mA[/COLOR]
mine charges in the usb port, but only if I turn off the screen or turn off the touchpad completely. my ports only provide 500mA, and with the screen off, the touchpad draws about 50mA, so it can charge at about 450mA. With the screen on, it draws about 760mA, so even when it's plugged in the USB, it is discharging at a rate of about (760-500=260mA).
i have noticed that using a Dx v20 does not charge my battery when pluged to computer via usb, does anyone know why.
its same with sd mounted/not
Charging by USB is not the best.
e.g;
10 mins of charging by AC = 9-10%
10 mins of charging by USB =
2-3% , less even :O
Leave a thanks if I helped!
d
on your mobo maybe, mine can do 1.5amps on a single usb, but that is not the issue, i dont cary a wall charger on work just cable.
kaostechno said:
i have noticed that using a Dx v20 does not charge my battery when pluged to computer via usb, does anyone know why.
its same with sd mounted/not
Click to expand...
Click to collapse
And what kernel are you using?
EDIT: Alfs?
If yes, there you may have the reason for your problems.
Hint: "update-rom-chargemon+vold-AlfsKernel.zip"
Charging via USB is very slow on all roms/kernels.
It is because USB can give only 500mA and phone is not taking more.
Normal charger not have that limit.
Plug phone and run logcat, you will see that
rav3n_pl said:
Charging via USB is very slow on all roms/kernels.
It is because USB can give only 500mA and phone is not taking more.
Normal charger not have that limit.
Plug phone and run logcat, you will see that
Click to expand...
Click to collapse
Yep. Its not just my phone or his phone, its everyones phone.
Anyway ; I don't use USB to charge my phone
Leave a thanks if I helped!
I've got this bug too.
I have a problem too...when i charge my phone it charges and then the battery percent starts falling untill it reaches 0% but the phone doesn't turn off it just stays on 0%
Sent from my X8 using XDA App
My N6 is no longer fast charging and is slower charging over all.
I bought a new turbo charger, tried different cables, rebooting and everything I can think of short of a factory reset. It seems to be a hardware problem with the device but I could use some advice here. I installed a Play Store app called Ampere which is showing a maximum charging current of 650 mA which I'm pretty sure is well below what it should be.
Just doing a back-up now in advance of a full wipe, though I don't think it's software related.
Any thoughts?
are you charging via being plugged into a wall outlet or via usb?
simms22 said:
are you charging via being plugged into a wall outlet or via usb?
Click to expand...
Click to collapse
Wall outlet using turbo charger
heccubusxda said:
Wall outlet using turbo charger
Click to expand...
Click to collapse
while usb and wireless, thats a normal amount of voltage, but for a wall charger, if below 90, its not quite enough. normal would be from about 2100-2400mA. but, since about 4 months ago, my phone stopped fast charging as well. but i still get more of a charge than you. honestly, ive no idea what causes it. my guess is that its something with the usb.
Just to update- I RMA'd my device this morning with Google and they're sending me a replacement device. It became clear it was a hardware problem with the USB port when I hooked it up to the PC and the N6 wasn't detected.
Just a note to anyone else with this issue. Check what Ampere says. It will give the mA, which is useful, but it will also tell you if it detects charging as "Turbo"
Indeed, Ampere was showing 'Normal' rather than 'Turbo' on my device.
ill try it when i get home as well..
Got my new N6 and everything's good. Ampere is showing 'Turbo' mode and its charging around 2000 ma. Much better than 70 mA, lol.
Hi everyone, so my issue I currently have with my Nexus 6 is as follows:
Device Details: Nexus 6, rooted, running CM13, Xposed Framework installed
Charging from USB: shows "charging slowly" message on lockscreen. Ampere shows an average of about 200mA, regardless of type of charger. Tried several QuickCharger adapters and a regular adapter, as well as several different cables to the same result. When connecting to a PC via USB, it shows the same charging power, however my laptop is not recognizing that the device has been plugged in.
Charging Wirelessly: charges normal as it always had, showing a average of about 500-700mA.
The issue occurred suddenly while I was out hiking and attempting to charge via a QuickCharge capable portable battery. The previous day it was charging as it always has.
All signs point to a damaged micro USB port on my Nexus 6, but wondering if there could be any other possible causes. I'm hesitant to try a factory reset to troubleshoot it as a software issue since I have no way of connecting it to my PC to re-root and re-flash CM if that doesn't fix the issue.
If it is the micro USB port as I think, any suggestions on how to remedy this? I'm used to using my device heavily everyday and charging it with a QuickCharger as needed, so this slow charging is a significant issue right now.
Thanks for any help!
your phone charges at differing speeds at differing parts of its charging cycle. and on top of that, charging via usb instead of wall charger will carge your phone at a much slower rate. that said, we also have a "usb fastcharge" option included in many kernels/custom roms. but you also have to know that fastcharge doesnt work with every usb port that you can plug into. it only will work with certain usb ports.
simms22 said:
your phone charges at differing speeds at differing parts of its charging cycle. and on top of that, charging via usb instead of wall charger will carge your phone at a much slower rate. that said, we also have a "usb fastcharge" option included in many kernels/custom roms. but you also have to know that fastcharge doesnt work with every usb port that you can plug into. it only will work with certain usb ports.
Click to expand...
Click to collapse
Sorry, I should have been more clear. When I said "Charging via USB" I just mean through the phone's microUSB port. Regardless of whether it was plugged into a wall charger(with or without QuickCharge 2.0) or my laptop or a portable battery, or a QuickCharge car charger, I was getting the same charge rate and message showing "charging slowly", much slower than wireless charge rate which showed the normal "charging" message. The Qualcomm QuickCharge 2.0 using the provided Motorola Supercharger or my QuickCharge 2.0 capable portable battery has always worked great prior to this issue.
mrkb510 said:
Sorry, I should have been more clear. When I said "Charging via USB" I just mean through the phone's microUSB port. Regardless of whether it was plugged into a wall charger(with or without QuickCharge 2.0) or my laptop or a portable battery, or a QuickCharge car charger, I was getting the same charge rate and message showing "charging slowly", much slower than wireless charge rate which showed the normal "charging" message. The Qualcomm QuickCharge 2.0 using the provided Motorola Supercharger or my QuickCharge 2.0 capable portable battery has always worked great prior to this issue.
Click to expand...
Click to collapse
ok, because the included "fastcharge" is only for usb charging. but regular charging still depends on where in the charging cycle you were. for example, at 92 itll charge at a much slower rate than at 50. what battery percent where you at when you noticed?
simms22 said:
ok, because the included "fastcharge" is only for usb charging. but regular charging still depends on where in the charging cycle you were. for example, at 92 itll charge at a much slower rate than at 50. what battery percent where you at when you noticed?
Click to expand...
Click to collapse
Initially very low, under 15%. Was attempting to charge with a QC2.0 portable battery, but the device was draining quicker than it was charging. When I got home, I attempted the Motorola "Turbocharger" wall charger and got the same rate. So I put it on the wireless charger, and as it charged, I kept testing the wall charger every 20% or so, getting the same slow charge rate.
The bottom line is really that the Wireless Qi charging is functioning properly as it always has, but any "plugged-in" type charging is charging at an extremely slow rate, no matter what type of charger, no matter what % the battery is at.
mrkb510 said:
Initially very low, under 15%. Was attempting to charge with a QC2.0 portable battery, but the device was draining quicker than it was charging. When I got home, I attempted the Motorola "Turbocharger" wall charger and got the same rate. So I put it on the wireless charger, and as it charged, I kept testing the wall charger every 20% or so, getting the same slow charge rate.
Click to expand...
Click to collapse
odd! it could be a software issue or just a derp. have you tried rebooting? im one of the few that i know with a broken usb on my n6. and it charges slower. it used to charge at about 2400mV, now it charges at 800mV max. now that its completely broken, i cant charge it via a usb anymore, now i charge it wirelessly, which is at about 800mV max as well. anyways, try a reboot, or reflashing your software first, before doing anything extreme.
simms22 said:
odd! it could be a software issue or just a derp. have you tried rebooting? im one of the few that i know with a broken usb on my n6. and it charges slower. it used to charge at about 2400mV, now it charges at 800mV max. now that its completely broken, i cant charge it via a usb anymore, now i charge it wirelessly, which is at about 800mV max as well. anyways, try a reboot, or reflashing your software first, before doing anything extreme.
Click to expand...
Click to collapse
Yea I've tried rebooting like 20 times lol. Also tried doing a CM nightly software update. I'll see if reflashing will do the trick. Any suggestion on reflashing from the device? I've always used Nexus Root Toolkit and did it from my PC.
If that doesn't work, guess I'm stuck with wireless charging too. Thanks for your help!
mrkb510 said:
Yea I've tried rebooting like 20 times lol. Also tried doing a CM nightly software update. I'll see if reflashing will do the trick. Any suggestion on reflashing from the device? I've always used Nexus Root Toolkit and did it from my PC.
If that doesn't work, guess I'm stuck with wireless charging too. Thanks for your help!
Click to expand...
Click to collapse
you can flash cm via twrp recovery on your phone, without a computer. oh, and my work buddies are still in shock that my n6 wirelessly charges.. they both have iphone 6s