[Q] Back to 2.2.1 Stock, please help me! - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello everyone! I Hope someone can help me. I need to send my phone to service because the 3.5 mm plug is broken.
I need to get it back to stock. I have used a custom rom from romkitchen, and now i have no idea of what i've done. Sorry, but i am a noob and my english sucks!
I downloaded/tried XWJS3, XWJS5 from here and i used Odin to do it:
http://forum.xda-developers.com/showthread.php?t=771111
When this was finished, a white ring came up on top of the screen, and i cant get any signal. Now i dont know what to do!
Can someone please help me here? Now my phone says:
FW version: 2.2.1
Baseband v: I9000XXJPY
Kernel v: 2.6.32.9 [email protected]#1
Build number: FROYO.XWJS5

no signal ,,ur imei is changed thts y ur phone is not getting registerd with ur operator.so its like a big prblm cause i too faced this prblm screwd my imei and product code and dint kno what happnd,but i had a backup of efs ...do u hav a backup of efs.....else u need to send it to samsung center....

no my imei has not changed. just checked the box and imei info on the phone... ? it is the same!

flash it with pit 512 stock rom and see if it works...always hav a efs folder backup if ur rooted.

what is efs?

its a folder were ur pcode,imei and important details of ur phone is stored.there r lot of topics here on tht so alwayz read some b4 u flash ,,check ur product code too,,do a factory reset and flash fresh stock rom..

The white circle is still there! Is there any way to fix this? By rooting it again or something? Please help!

If you want to go back to a stock rom (without root i suppose) you will need to update your device with kies. But because you don't have a kies installed ROM, you won't be able to update with kies.
You will have to spoof the ROM version. Try following this post:
http://forum.xda-developers.com/showthread.php?t=959806
Let me know if you have any problems.

Related

[Q] Problem with 2.3 no sim found

hi everyone
i'm new to all of this and after few try's i have 2.3 on my sgs (3 ire) but the phone cant see the sim card i tryed *#7465625# and he give me error i dont know how to root the phone can someone help me ?
itamarsea said:
hi everyone
i'm new to all of this and after few try's i have 2.3 on my sgs (3 ire) but the phone cant see the sim card i tryed *#7465625# and he give me error i dont know how to root the phone can someone help me ?
Click to expand...
Click to collapse
Hi itamarsea, have you tried checking settings/wireless and networks/mobile networks/access point names
check if your settings are stored for 3 network.
Or check settings/ about phone/ status/ IMEI
check that IMEI number is still the same.
re setting
imei-unknown
network-unknown
imei sv-unknown
phone no-unknown
Type
*#06*
in dialer and see what number comes up.
Also what firmware are you on, jv1?
Type in *#1234# for firmware info.
It could just be a corrupt install. Iv flashed 2.3 on my sgs with odin about 5 times and tried about 3 2.3 roms and iv had no problems (Other than some buggy memory handling)
pda xwjn1
phone unknown
csc unknown
2.3 is beta A greek word for unfinished .
Factory reset that fails
Flash different rom via Odin .
You started at step two of flashing i presume and failed to backup your efs folder .
jje
Same thing on my phone, I flashed one JPM firmware with odin and nothing, tried with gingerbread and nothing... any info would help. thnx in advanced
Hi,
I have the same issue: NO SIM CARD!
My phone is locked and today I wanted to try insert another sim card, just to see if the message: "Insert the unlock code..." appears. After this, I noticed it's not working, so I put back the original sim card and realized that I have no network and got this notification message: NO SIM CARD.
I checked the IMEI code and it's the same, any hints, tips?
Is there some kind of problem with my sim?
If anybody can help me, I'd be more than grateful.
Firmware version: 2.2.1
Baseband version: I9000XXJPY
Kernel version: 2.6.32.9 (Voodoo stable 5.4.1)
Build number: Darky's v9.3.XWJS5
As a few people mentioned before it's a beta rom so it contains bugs. This may be one of them. If your imei isn't a lot of 0 you probably won't have problem after they fix this bug
Sent from my GT-I5700 using XDA Premium App
IMEI appears as unknown even after flashing darkys rom os a stock rom :S
I don't know how the Galaxy S stoores the imei, but my spica uses the efs partition for it, and this partition doesn't change when you reflash a rom (even if you used odin).
Sent from my GT-I5700 using XDA Premium App
EFS file may change after flashing a rom enough posts on here about it .
Rule one of flashing is to backup your efs folder .
Copy backed up efs to phone to fix
Probable fix as you have flashed custom roms is to use Odin and flash stock rom that may fix your efs .
jje
JJEgan said:
stock rom that may fix your efs .
Click to expand...
Click to collapse
Stock rom doesn't fix the efs. There is a guy at samdroid.net who can restore Spica's imei, maybe you should ask him if he is able to do it with your phone. Check out this url: http://forum.samdroid.net/f28/complete-imei-restore-how-1817/
Sorry, I found that I9000 is not supported.
theres a post about imei and pcode prblm check the forum,if u ave a backup of efs than ur lucky.usually if u screwed ur imei thts prblm m8.flash ur stock rom,get ur phone rooted,,there r good free apps for tht.download astro or root exp or lynda file manger.u can c a folder efs check tht out first.if u ave a backup of efs u can restore.for doubt pm.....cheeerz
Lost my IMEI flashed stock rom reset it .
jje

[Q] hii guys pls help

hi guys pls help me i tried surf the net with no help
i have a Samsung galaxy s i9000 i rooted to 2.3.3 but
today i flash my phone back to singtel firmware JG4 and i plug my device to kie
it came out this error hw do i change my CSC back to singtel?
Uploaded with ImageShack.us
pls help thanks
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
diiiooon1989 said:
i think its better that you first go to stock rom xwjs3 with the boot loaders.
you can download them from sam firmware,
and then check in kies the csc must be normal again, if so you can flash the rom you want..
i had the same problem and i think it is because with xxjvk you get the new boot loaders, and you must go back to the old one for you're rom
Click to expand...
Click to collapse
hi thanks for the reply but is this work for all country phone? cus mine is singapore
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
diiiooon1989 said:
i dont know that for sure
i know there are 2 roms one from darky : resurection edition
and one from nitr8 : EZbase
these roms are there for those problem that you have.
they wil restore everything
mayb you can check in those threads and find a answer there
Click to expand...
Click to collapse
hi bro i tried finding but with no luk
do u mind guide me with this
how to get xwjs3 with the boot loaders.>??
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
diiiooon1989 said:
yeah well i think that the best thing you can do is go to samfirmare.com
download there the xwjs3 firmware
this has the bootloader in it and wil bring everything to stock rom
you know how to flash that true odin?
once you have done that hang youre phone on kies and check the csc, it should say no (kor) more.
then you can flash youre firmware and it should be oke ( at least that helped for me )
i hope this wil help you!
Click to expand...
Click to collapse
hi bro thanks for the guide
but nw i have this issues
Uploaded with ImageShack.us
the reason i wanna flash back cus my phome home button not response-ing
): and my camera Len crack
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
JJEgan said:
A flash wont fix a cracked camera lens .
Kies cannot deal with a rom that does not match the correct product codes and hardware ID of the original device network data .
If you require Singtel firmware you need to source it from somebody that backed it up as you i take it did not back up your firmware .
Alternative is to try the Kies registry spoofing methods posted on xda or the app from the market .
http://www.appbrain.com/app/spooffw/com.johnan.spooffw
jje
Click to expand...
Click to collapse
hi thanks for the guide but nw my phone hang at Galaxy S
GT-i9000
Samsung
logo Screen >.< and plus my Home button not working anymore
even i try up + power + home button to recovery mode
or down+ power + home button mode
also not working >.>"
myrddral said:
If any of the firmwares overwrote your product code (not the salescode in the CSC!) then the only solution I know about is to put a factory firmware which has lower version than the latest available through kies (that to make sure kies can be connected and the fw updated) and as a second step you have to manually edit the nv_data.bin file in the efs folder(make a backup before you do this!) with a HEX editor. Find the wrong product code the jist replace the letters, write it back to the efs folder and reboot. You should be fine.
And don't forget to flash a carrier specific CSC via Odin!
Click to expand...
Click to collapse
hi thanks for the guide but i think my phone is dead >.>
Possible fix flash stock 2.1 rom with repartition checked and pit 512 not a 2.3.3 rom
Via Odin .
jje
Sunday i send my phone to causeway point to repair my camera lens and button.. today they send my phone to my house Thumb up... i notice they change all the button, lens and the whole back case and i notice my firmware is i9000DXJPB is it the latest firmware?

No network avaiable after factory reset

my phone is international version (Euro verion), after I unlock, i factory reset and then my phone can't text sms, call. Plz help me! thanks a lots
tuteary Vtd said:
my phone is international version (Euro verion), after I unlock, i factory reset and then my phone can't text sms, call. Plz help me! thanks a lots
Click to expand...
Click to collapse
Have you checked your APN settings?
MrIwik said:
Have you checked your APN settings?
Click to expand...
Click to collapse
Have u mean Access Point Names?
My phone has no service
tuteary Vtd said:
my phone is international version (Euro verion), after I unlock, i factory reset and then my phone can't text sms, call. Plz help me! thanks a lots
Click to expand...
Click to collapse
u seem to have corrupted ur modem file.. flash te below link via cwm or use odin..
http://db.tt/sMvERqL
Dont forget to hit thanks!
doomsdaycs said:
u seem to have corrupted ur modem file.. flash te below link via cwm or use odin..
Dont forget to hit thanks!
Click to expand...
Click to collapse
i can't download your link, can u give me another link?
thanks all, i have sloved my problem. I also want to share my solution . I took uproom and hard reset hope if someone face to the same my problem, they can read my post hii
I've got the similar problem. My phone says "please put the sim card into the phone". This happened after I flashed Juwes 5.1 custom rom. My IMEI was corrupted after flashing, then I managed to restore it after I edited the nv_data.bin. Now I have an IMEI number, but the phone cannot recognize any simcard.
Reflashing to the stock rom with Odin doesn't help. I've already tried XXJVQ, now I've got XWJVI. Neither hard reset nor flight mode helps. I've already tried to delete nv_data.bin and nv_data.bin.md5 and reboot, but result is still the same. I cannot find any tipps for solution. Have you got an idea what could I try?
Here some information on my phone:
german version, not branded
*#06# shows the right IMEI
*2767*4387264636#:
Sellout SMS Off
Pcode: GT-I9000HKYDBT
Mode: Prod
*#1234#:
PDA I9000XWJVI
Phone I9000XXJVO
CSC I9000DBTJV2
everything seems to bi OK but it doesn't work. I have already found a topic in your forum about SIM initilializing bug, and somebody suggested to flash the following ROM:
(Rom) I9000 Hybrid / No TouchWiz *9/7/2010* for I9000
but its no longer available. EFS backup doesn't exist, as I deleted it some days before That was a big mistake.
Now I have to stay without my phone over the weekend
robis77 said:
I've got the similar problem. My phone says "please put the sim card into the phone". This happened after I flashed Juwes 5.1 custom rom. My IMEI was corrupted after flashing, then I managed to restore it after I edited the nv_data.bin. Now I have an IMEI number, but the phone cannot recognize any simcard.
Reflashing to the stock rom with Odin doesn't help. I've already tried XXJVQ, now I've got XWJVI. Neither hard reset nor flight mode helps. I've already tried to delete nv_data.bin and nv_data.bin.md5 and reboot, but result is still the same. I cannot find any tipps for solution. Have you got an idea what could I try?
Here some information on my phone:
german version, not branded
*#06# shows the right IMEI
*2767*4387264636#:
Sellout SMS Off
Pcode: GT-I9000HKYDBT
Mode: Prod
*#1234#:
PDA I9000XWJVI
Phone I9000XXJVO
CSC I9000DBTJV2
everything seems to bi OK but it doesn't work. I have already found a topic in your forum about SIM initilializing bug, and somebody suggested to flash the following ROM:
(Rom) I9000 Hybrid / No TouchWiz *9/7/2010* for I9000
but its no longer available. EFS backup doesn't exist, as I deleted it some days before That was a big mistake.
Now I have to stay without my phone over the weekend
Click to expand...
Click to collapse
Hi,
There was no need for you to flash to stock ROM after installing Juwe's ROM 5.1. I am currently on the same ROM and faced the same problem. All i did was flash the JVQ modem via odin and my device recognized the SIM card. Hope this helps.
Thanks for your reply. as I'm now on stock rom, I've already flashed the stock JVI with phone and csc over ODIN. But this didn't solve the problem.
The problem is solved, After restoring my IMEI I was stupid enough, to put the sim the wrong way into the phone Now its working. Thank you guys.
hi tuteary Vtd, what do you mean by "uproom"?? i have the same problem, could you please give some more information about your solution?
thanks,
sami

Need urgent help

I don't know what I've done to my phone but, I bought it 2 days ago and researched about installing floyo etc etc, I know for a fact my model is E15A not E15i, well as a requirement I meant to have baseband 15 If I'm correct, I had 06 so I decided to try and flash the baseband to 15.
What happened was it got stuck at the sony ericsson thing at the start of the phone.
My other friend directed me to flash this file on to the phone, so I did. Which unfortunatly leaded to my phone saying this - Firmware version 1.6
Baseband version Unknown
kernel Version 2.6.29
Build number 1.3.A.0.62
Does ANYONE know how I can fix this, I've downloaded the baseband version 06 and 15 again still the same result, seems I cant get back to the original version, I know that I do have xrecovery on my SD card ( Got wiped off for some reason ? ) if I put that back on I don't want to have to flash back to E15i again because it takes ages to load up.
Please if someone can help me, I don't want to be stuck with this forever.
u need reflash new baseband n latest version..
all of custom rom need it...
or u can try seus sony to repair the problem.
[email protected]
go to x8 dev forum will find wat u need... like the new version file..
[email protected]
Wont work no matter what I do

[Q] baseband from ...06 to ...15

hi all, need your help. i want update baseband version my friend X8 from ...06 to ....15 via PCC but PCC just update 'build number' and baseband still ....06 (my own X8 can update baseband via PCC). i want flash baseband my self but i dont no how to do it. i try download baseband from master blagus thread, but i cant download from he mediafire.... somebody can help me.... thanx for all...
sorry for my bad english....
Find a way to download it, get the flashtool, put it in the firmware folder and flash it like you're going to flash a stock rom on to the phone.
Sent from my X8
ow boy.....
its so easy man... pls read Q&A..

Categories

Resources