Database Develop

USB tether w/o Root. PDAnet for Android Available now!

Hey everyone, PDAnet is now available for android!
http://junefabrics.com/android/index.php
PdaNet does NOT require root access or hacking your phone's firmware in order to work. It is just a regular Android application that works on all Android phones as-is. Currently this initial version supports USB tethering on the T-Mobile G1 phone. Tethering is secure and will also charge your phone at the same time. Your phone can either connect to 3G data or WiFi.
Click to expand...
Click to collapse
It works perfectly, and root access is not required.
Enjoy!

Good find! Works best with Opera browser (other browsers such as IE and Firefox, won't display pictures for some reason...) Has some connectivity issues when using longer than 5 minutes (yes, I have enable usb bugging enabled and stay alive while connected via usb) All and all, a good program for your laptop without draining your G1 or when the REAL internet goes out. Good find! Thanks! Also, incredibly simple to use!!!

EXE installer? WTF?! How does it work? Does the program require something on the computer-end too?
I'm Linux user, so I can't use it?

Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.

andonnguyen said:
Yes, it seems to be only compatible with windows. Since you're in linux, you may try running it through WINE to see what happens.
Click to expand...
Click to collapse
Did you experience the pictures not loading problem also while using IE or firefox?

this doesn't really seem to work yet
I was able to install it without much trouble and the initial connection looked promising (well, some pages came up anyway).
It was basically impossible to connect to Speedtest.net however and Speakeasy only rated my connection at 287/283 kbps at best (the G1 was on WiFi). I tested it again with the G1 on 3G and got a 409/330 kbps (doesn't that seem weird that it would rate better on 3G?) but then it seemed to stop connecting somehow and I had to restart the program and reestablish the connection on the PC. After a few more minutes it happened again. I would call this basically not useful at the moment, but I hope they can work the bugs out and get some decent speed out of it.
For reference, using Tether WiFi to connect to the G1 over 3G Speakeasy rated the connection at 699/316 kbps. And in my experience it's stable/consistent.
As a disclaimer, this was on my work laptop which has some pretty hefty encryption software installed. While this may be the problem, I didn't have any trouble connecting initially (multiple times).
Additional:
Their "reviews" section is just "customer testimonials", as my honest yet critical assessment of the app's inability to perform as intended was NOT posted and they didn't even bother to drop me an email to try to sort out the problem. I hope they can improve on the app, but they're quickly losing my respect and interest.

I just got this. I dl it to my sd card, connect phone to pc w usb, ran exe through windows. Installed program automatically onto phone. Windows asks to install driver for g1 and it does the work from there.
It seems to work ok, the first few tries on my desktop it would disconnect after a few minutes, restarted phone and its been better but still only seems to stay connected for about 20 min, which should be ample time to do alittle websurfing without getting mad about disconnects.

well they might not have replied because they are aware of the problem, and they clearly state that this is beta software. if you look at the known issues the first one is about the connection dropping and having to reconnect.
once they work out the bugs this software will be pretty useful because of how easy it is to use.

if only i could plug the g1 into the 360 would save me $100...or if i could share the connection with my windows media desktop(i use it as a media server for my xbox and its not even close to a internet connection).
i tried to connect it but it does the network doesnt have sufficient MTU settings. xbox live requires a minimum MTU setting of 1364.
darn.
ill be watching for updates though, should be useful once fully operational.

i've been using mine for a while now...no problems once i turn off the wifi switch on my laptop...recently when i plug it in tho, it says PDAnet is expiring soon...is this supposed to be a paid app?

This app is gay... It was pretty good at first... but once the guy updated to r1.5... its been acting gay... it would come up with random blockings... it blocked www.google.com... wtf?... and wikipedia... yahoo answers... so I just got root and installed WiFi Tether for Root users... works way better and doesnt have blocks...

USB tether 4.2.6
This is supposed to be plug and play. A lot of people have said it's great. I have not been so fortunate. Anyway, could someone give me directions on how to use this. 1. plug in phone via USB. 2. settings/wireless settings/ internet tether (on). 3. Go to PC and click on G1Tether click connect. For me this does not work. Help.

This application is a fine hold-over for people who are too stupid to get root, but it is a VERY VERY poor imitation of tethering.
1) A real tethering solution will NOT require proprietary crap to be installed on the CLIENT.
2) Wired or Wireless tether for root users *IS* a *TRUE* plug-it-in-and-it-works solution. Run the program on the phone, plug in the wire, and you're done. No weird nonsense to be installed on the computer.

Mobile network sharing app

Hey guys, longtime reader. I was wondering if there was an app that i could DL that would give me the funtionality of the Hero's Mobile network sharing settings? I have searched far and wide and have not seemed to find a solution for me to easily tether my PC running Ubuntu 9.04 to my G1 running Cy's 4.1.11.
Sorry if this has been discussed elswhere, and as you can see ive been a member for a long time and have never needed any help, but i have been lookin for about a week now and have only been able to find these 2 sites about it: http://joshuaredstone.blogspot.com/2009/01/bluetooth-tethering-from-ubuntu-to.html and http://www.kryogenix.org/days/2009/...thout-jailbreaking-or-installing-applications
The second one is the one im inquiring about.
thanks

Please correct me if I'm misreading you, are you looking to tether? ie. use your cell phone to get ubuntu online?
If so I use aNetshare, first result in google. It has worked best for every rom I've ran, the older RCs, cupcake and now donut. I'm roaming 99% of the time so that may be why the other more popular ones give me trouble. idk...
For any of them to work you'll need root and su permissions. There is a paid app out there which claims to tether w/o root or su. I think through usb.

yah im slightly confused as to what exactly it is you are looking for as well...but the one im using is called PdaNet just google it and its one of the first choices.
its free.
it claims it works without root, i wouldnt know cuz im rooted =] but you can try!
it works via usb so it charges the phone while you're surfin =]
EDIT....heres the link. http://www.junefabrics.com/android/index.php
PS. my bad...didnt realize you were already running cyan =]

sonikamd said:
Please correct me if I'm misreading you, are you looking to tether? ie. use your cell phone to get ubuntu online?
If so I use aNetshare, first result in google. It has worked best for every rom I've ran, the older RCs, cupcake and now donut. I'm roaming 99% of the time so that may be why the other more popular ones give me trouble. idk...
For any of them to work you'll need root and su permissions. There is a paid app out there which claims to tether w/o root or su. I think through usb.
Click to expand...
Click to collapse
sorry if i wasnt clear before but i have Ubuntu and want to know how to tether my G1 through bluetooth using Ubuntu....i cant get netshare to work through Ubuntu. how did you get it to work?

bluetooth, you got me there... sry
Ya, sry no idea how to tether via bluetooth. I really only use wifi. Dunno why(maybe because of high data traffic) but my phone would constantly die while tethered and charging via usb.
Other than getting ubuntu to see&install my wireless card(nothing to do with my phone) I don't remember having any problems getting it to see or connect to my phone.
Or am I still confused and what you're really trying to do is use the internet you already have working on ubuntu to get you phone online?

for whatever reason my Ubuntu 9.04 does not automatically read my phone (Tmobile G1) as a modem through the usb. whenever i configure the steps (http://technologyheaven.com/2009/08/27/phoneasmodem/) to get it to read my phone it still says not connected even though it IS connected. I know the usb ports work cause i can get it to mass storage...just not modem.
Any help would be greatly appreciated, thx!

it's been a long while since I used USB tethering (anyone remember tetherbot & socks proxies). You may need to have the android sdk installed or atleast know how to communicate with your device via console. Connecting as a mass storage device and as a modem are two different things, so one may work great while the other still needs more setup.
Hopefully someone else with more experience can chime in.. please.. anyone...
I don't know a ton about cyan's roms but I'm assuming they come rooted by default. Is there a reason you don't want to use the wifi method for the time being?
edit: fwiw, you can use the wifi method while charging via usb. But, with heavy traffic(downloading huge files consecutively) the usb may not be able to keep up with the battery usage.. especially if on a 3g network. Using the stock charger & wifi on 3g the battery actually gets a little charge(power supply is ~500mA on usb, ~1A on charger). Either way, usb or wifi, usb or charger, turn off your screen for best results.

Im surprised no one mentioned Wireless tether for root users:http://code.google.com/p/android-wifi-tether/
supports both wifi and bluetooth.

@B3astofthe3ast, cool I didn't know that(no bt on my laptop, ya it's kinda old heh). For whatever reason on several different roms I get terrible data when using that app, it might be because I'm 100% roaming with no 3g ever. Tethers to pc fine just 9/10 doesn't seem to be able download stuff.

thx, but i have that (http://code.google.com/p/android-wifi-tether/). anyway, im thinking its got something to do with my comp and not the phone itself, seeing as i can get on internet with windows just fine. Im just trying to move away from windows and to Ubuntu.
p.s. i dont have a wireless card in my self built computer, thats why i dont use wifi!

Reverse-Tethering on a Vogue with Android (Share Windows PC's Internet with phone)

I have done the NAND install method on my Vogue with Myn's Warm Donut RLS3 from 2010-02-20. Since I do not have a data plan, and have the XV6900, which comes without WiFi, I cannot just connect to a local network to get internet access, so how do I get access over the USB cable or via Bluetooth? This would basically be like "Reverse-tethering", that you can do in Windows via ActiveSync (when you are hooked up you can use the desktop PC's internet connection)
So, how do we do this now on Android?
Thanks,
-C

Short version: we don't. Do you want details?

Well, without looking very hard... I know this is possible, since you can do almost anything on Linux. Here's a brief description of how this is done, although it may need some modification for our builds:
http://www.htc-android.com/viewtopic.php?f=5&t=154
OR
http://forums.androidandme.com/topic/internet-over-usb
Search for android ifconfig usb and see what you can find.

polyrhythmic said:
Well, without looking very hard... I know this is possible, since you can do almost anything on Linux. Here's a brief description of how this is done, although it may need some modification for our builds:
http://www.htc-android.com/viewtopic.php?f=5&t=154
OR
http://forums.androidandme.com/topic/internet-over-usb
Search for android ifconfig usb and see what you can find.
Click to expand...
Click to collapse
We certainly could if it was supported in our kernel, but our only USB drivers are adb and mass storage. I believe dzo and mssmison are working on some other. cdc, ethernet, rndis, etc. aren't currently supported.

mrkite38 said:
Short version: we don't. Do you want details?
Click to expand...
Click to collapse
Hmm bummer. Most people with cell service are STILL not paying for data plans, and only about 50% of people with smartphones have data plans yet. Heck...I got a data plan and then got rid of it after 6 months...that alone was $180 worth that was totally wasted for what...the convenience of checking email on my lunch break....yeah that's worth it. At least ATT is only $10 a month now if you are on a shared plan with your family for unlimited data. To bad I an on VZW, lol...
So anyway, it seems like this would almost be a must. I would gladly pay a developer here $50 if he came up with a widget to do it. He'd make a lot more than that on the market too if he developed that.

crobs808 said:
So anyway, it seems like this would almost be a must. I would gladly pay a developer here $50 if he came up with a widget to do it. He'd make a lot more than that on the market too if he developed that.
Click to expand...
Click to collapse
'Real' android phones can do it, our kernel can't. Plus, you can't download from market or use youtube, etc, over bluetooth tethering (I've tried) or via usb from what I've read. Only the cellular data connection and wifi are considered 'valid' by Android. So the dev would have to fix that, too, to make it worthwhile.

mrkite38 said:
'Real' android phones can do it, our kernel can't. Plus, you can't download from market or use youtube, etc, over bluetooth tethering (I've tried) or via usb from what I've read. Only the cellular data connection and wifi are considered 'valid' by Android. So the dev would have to fix that, too, to make it worthwhile.
Click to expand...
Click to collapse
I would be happy just to have WiFi, but the XV6900 (Verizon Touch) doesnt even have WiFi at all. I am considering getting the Nexus when it comes to Verizon in a few months.

crobs808 said:
I would be happy just to have WiFi, but the XV6900 (Verizon Touch) doesnt even have WiFi at all. I am considering getting the Nexus when it comes to Verizon in a few months.
Click to expand...
Click to collapse
Yeah, and the mogul might be a good solve but it only has a 64 MB ROM... I know, been through it all in my head before, too.

Thanks
Thanks. It can sure take some time searching to find some of this info, but even with the NO it won't work I'll still be searching
I want the Bluetooth PAN on Android!
It does not make any sense that Google would know I'm connecting via Bluetooth PAN vs. WiFi to my PC since this occurs behind my Router??? The IP is set at the Router level, my phone should not be visible.
edit... misread post above.
I guess Android itself would know, but that seems odd. But Odd rules sometimes.

Any updates on possibilities yet ??? or there is still no way to use internet on Vogue Andriod without having data plan ?

gogodj said:
Any updates on possibilities yet ??? or there is still no way to use internet on Vogue Andriod without having data plan ?
Click to expand...
Click to collapse
Not yet... the reasons posted above are still true.

Are there any plans to add this feature to future ROMS? The only reason I haven't switched to android from windows mobile is because of this.

damaph said:
Are there any plans to add this feature to future ROMS? The only reason I haven't switched to android from windows mobile is because of this.
Click to expand...
Click to collapse
I don't think so. It's a kernel thing, not a rom thing, and it requires a lot of driver work. But even if it did work, android wouldn't recognize it as a valid connection.

rfcomm + pppd to tether both ways?
I am new to android, but I have networking experience with Linux. I am running Myn's latest Warm Donut on my Sprint Touch. And it seems that hciconfig/hcitool are working to associate the phone with another bluetooth interface. Also, rfcomm seems to be working. And lastly, pppd is installed and (indeed) necessary for the 3g/edge connection as evidenced by the ppp0 in ifconfig. Also, reviewing dmesg, I see L2CAP and BNEP are compiled into the kernel. And pand is also compiled and running. I am not familiar with these, but it seems to offer another route for maybe getting a bluetooth IP link established.
So, my question is simply this. Can we not use the hci commands to associate the phone to another bluetooth adapter on, say, a networked Linux system? Then use rfcomm to build a bluetooth serial connection between the two systems, and finally establish a ppp interface on each end of that serial link? Once that is done, the two systems will share a point-to-point IP link over BT over which they can communicate. Then it is simply a matter of establishing gateways, proxies, iptables NAT, DNS, and routes to make either forwarded or reversed tethered connections. I am reasonably confident I can do that. With a Class 1 bluetooth interface on the Linux server side, the range could be extended for reverse tethering...perhaps making it useful as a moderate range wifi replacement. Other webpages discuss similar approaches using bluetooth rfcomm/pppd. It might require experimentation to find reasonable baud rates for the serial link, etc., but nothing seems obviously impossible. And bluetooth can provide a 1 Mbps+ speeds...again, not great, but better than Edge or dodgy EVDO.
Likewise, we may be able to build a proper PAN connection. I am not familiar with pand and bnep interfaces, but I could probably figure it out.
As I said, I am new to Android, and I am just starting to test this on my phone. Is there something that I am missing with regard to existing hci/rfcomm/pand functionality? Dmesg reports all of these compiled in and hcitool scan seems to do something...it blinks the blue light and find my laptop. I guess I am just asking if someone can shoot holes in my idea before I waste too much time pursuing it.
Thanks.

mprinkey said:
I am new to android, but I have networking experience with Linux. I am running Myn's latest Warm Donut on my Sprint Touch. And it seems that hciconfig/hcitool are working to associate the phone with another bluetooth interface. Also, rfcomm seems to be working. And lastly, pppd is installed and (indeed) necessary for the 3g/edge connection as evidenced by the ppp0 in ifconfig. Also, reviewing dmesg, I see L2CAP and BNEP are compiled into the kernel. And pand is also compiled and running. I am not familiar with these, but it seems to offer another route for maybe getting a bluetooth IP link established.
So, my question is simply this. Can we not use the hci commands to associate the phone to another bluetooth adapter on, say, a networked Linux system? Then use rfcomm to build a bluetooth serial connection between the two systems, and finally establish a ppp interface on each end of that serial link? Once that is done, the two systems will share a point-to-point IP link over BT over which they can communicate. Then it is simply a matter of establishing gateways, proxies, iptables NAT, DNS, and routes to make either forwarded or reversed tethered connections. I am reasonably confident I can do that. With a Class 1 bluetooth interface on the Linux server side, the range could be extended for reverse tethering...perhaps making it useful as a moderate range wifi replacement. Other webpages discuss similar approaches using bluetooth rfcomm/pppd. It might require experimentation to find reasonable baud rates for the serial link, etc., but nothing seems obviously impossible. And bluetooth can provide a 1 Mbps+ speeds...again, not great, but better than Edge or dodgy EVDO.
Likewise, we may be able to build a proper PAN connection. I am not familiar with pand and bnep interfaces, but I could probably figure it out.
As I said, I am new to Android, and I am just starting to test this on my phone. Is there something that I am missing with regard to existing hci/rfcomm/pand functionality? Dmesg reports all of these compiled in and hcitool scan seems to do something...it blinks the blue light and find my laptop. I guess I am just asking if someone can shoot holes in my idea before I waste too much time pursuing it.
Thanks.
Click to expand...
Click to collapse
That's all correct, and I've done it before. But the issue is that Android only acknowledges TWO kinds of data connections: cellular and wifi. When I setup a pan and iptable'd my way to the internet, I was able to get google maps, but not market. I haven't tried Opera but the android browser didn't work. Etc., etc. So I think the usefulness of pan is limited. The real challenge here is for someone to dig through the source and find out how to ADD bt and USB as 'valid' data interfaces. I've never looked into that.

Cellular connection is ppp0. Have you tried running pppd over rfcomm? Or assign an identical IP address to the pan/pppd interface and set it's metric a notch lower so it is preferred over the ppp0 one? Also, will Android route over a VPN? Setup pan and VPN over it. VPN seems to "own" Internet traffic when it is configured according to this: http://code.google.com/p/android/issues/detail?id=4205
Also, I've seen posts indicating that the default browser can be configured to use a proxy.
Just ideas and I'd like to know what you've tried so I don't waste my time. Thanks for your input.

mprinkey said:
Cellular connection is ppp0. Have you tried running pppd over rfcomm? Or assign an identical IP address to the pan/pppd interface and set it's metric a notch lower so it is preferred over the ppp0 one? Also, will Android route over a VPN? Setup pan and VPN over it. Also, I've seen posts indicating that the default browser can be configured to use a proxy.
Just ideas and I'd like to know what you've tried so I don't waste my time. Thanks for your input.
Click to expand...
Click to collapse
Nope, didn't try any fancy-pants stuff. When I did all this, I was a total n00b to linux (only a partial n00b now) and it didn't take too long, so I say - give it a try! That's the spirit around here.

mrkite38 said:
Nope, didn't try any fancy-pants stuff. When I did all this, I was a total n00b to linux (only a partial n00b now) and it didn't take too long, so I say - give it a try! That's the spirit around here.
Click to expand...
Click to collapse
Great. That is encouraging. The link that I edited into my previous post seems to indicate that ALL traffic gets routed over the VPN when it is established. That would fix any security concerns I'd have about using a high-powered BT adapter. I think I will give it a spin.

USB Ethernet
In my kernel hacking trying to get Debian to run, I managed to enable USB Ethernet (the function driver; USB gadget crashes the phone) working, and I've been using it to SSH into my phone. I've used it to apt-get update without any problems. I believe it's just a kernel config option (although I might have done some code modifications), so the problem isn't the driver, it's with Android's userspace.

gTan64 said:
In my kernel hacking trying to get Debian to run, I managed to enable USB Ethernet (the function driver; USB gadget crashes the phone) working, and I've been using it to SSH into my phone. I've used it to apt-get update without any problems. I believe it's just a kernel config option (although I might have done some code modifications), so the problem isn't the driver, it's with Android's userspace.
Click to expand...
Click to collapse
So you enabled USB ether in the kernel config and it's working for you? Against a linux host or Windows? that would be nice, I haven't tried that in ages.
Edit: yes, the 'valid' connection check is definitely in Android userspace. But I either forgot or didn't know that our usb ether func driver worked when enabled.

[Q] Tethering after JB update (iptables help?)

Hello All,
My tethering hasn't worked since the upgrade, regardless of root, method or hack. It appears to set up the network fine and the laptop connects, but I can't pull up a site and troubleshooting points to DNS errors.
So it seems (after loads of research) that this is a known issue... But it's not an issue so much as a "feature" for our carriers: Apparently Jelly Bean allows Carriers to recognize and block tethering. That's why some folks lose tethering, and some don't. The "issue" is a switch that was enabled at the carrier's end.
For those of you who know that you are supposed to be able to tether per your agreement, the solution should be as easy as calling your provider and having them enable tethering.
For those (like me) who have been sneaking in the back door and wish to continue to do so, the fix seems to lie in iptables (root required). The simplest version I found was entering this in terminal:
Code:
su -c "iptables -tnat -A natctrl_nat_POSTROUTING -s 192.168.0.0/16 -o rmnet0 -j MASQUERADE"
...where "rmnet0" is replaced with the interface specific to your device. Apparently after this, one should be able to tether normally.
(Reference Android Google Code reported issue 38563, see comments 122, 125 & 131. Sorry... too noob to be able to post links)
Unfortunately this didn't work for me, but more than likely because I haven't a clue what I'm dabbling in. I sought out my "interface" by running "netcfg" in terminal with tethering disabled, and chose qmi0 (the one with a xx.xxx.xx.xx format IP address, the same as shows for the phone when it's successfully online). Does anyone know enough to see my mistake, or otherwise be able to help me with this?
Thanks in advance!

Actually FoxFi released an update that supports usb tethering and wifi hotspot for the Droid 4. No root required.
You have to uninstall earlier versions of FoxFi and it's certainly worth it to get the paid version!
You do have to establish a password/pattern unlock for your phone which I find slightly annoying, but that's the workaround FoxFi found to make it work under JB and certainly worth the minor inconvenience.
Works great! I am writing this from my tablet tethered through hotspot to my Droid 4.
I had a custom rom installed because I need the wifi hotspot, but now I can thankfully go back to the (extensively TiBu cleaned) stock rom since the CM roms all have unacceptable bugs and/or instabilities IMHO.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2

Thanks for your response berndblb... I must admit, you got my hopes up!
Alas, it seems my problem runs deeper than FoxFi's solution. I downloaded, installed and gave it a shot, but basically got the same stuff I'd acco mplished already with root: I can build a network, I can connect to it (really adds to the optimism), but I can't reach the DNS server. No joy. My guess is that FoxFi still only manages to bypass Verizon's block, but not the switch that's the problem inherent to JB.
And so I maintain my hope to find a resolution via iptables as described here https://code.google.com/p/android/issues/detail?id=38563.
Help?

Strange, I can tether just fine on my Droid 4 (Verizon) with unlimited data using the SQL database edit and the stock Mobile Hotspot app.
I'm not supposed to have tethering but just browsed the web on my tablet tethered to my Droid 4 with no issues.
Who is your carrier? Every other Verizon Droid 4 owner who has done the SQL edit has been able to tether....

tcrews said:
Strange, I can tether just fine on my Droid 4 (Verizon) with unlimited data using the SQL database edit and the stock Mobile Hotspot app.
I'm not supposed to have tethering but just browsed the web on my tablet tethered to my Droid 4 with no issues.
Who is your carrier? Every other Verizon Droid 4 owner who has done the SQL edit has been able to tether....
Click to expand...
Click to collapse
Thanks for your response.
I'm with Rogers here in Canada (AT&T's counterpart). Agreed about the SQL database edit having been the trick. That's all it took to get me rolling in ICS with the stock hotspot app. When I upgraded to JB, I removed the entitlement check in the SQL database and thought I was set... but no joy. Everything looks good right up until I try to pull up a website. That's when I realize I'm not getting to the DNS Server, and therefore unable to surf. I know nothing's changed on Rogers' end, because I can still tether if I drop my SIM back in my old D2G.
My research led me here: https://code.google.com/p/android/issues/detail?id=38563#c122. Previous comments explain that tethering is now blockable at the carrier's end (what Verizon was attempting to add with their "entitlement check"). Comment 122 narrows down the source of this block as IP address related, and suggests a fix that worked for him. To quote:
I'm not sure exactly what it means for the device to "properly flag when data is for tethering purposes" (comment #105). My own observation was that the outbound data on the 'rmnet0' interface wasn't being NATted. The phone's IP address on that device was (for example) 10.182.48.29 and all its *own* data was coming from that address. And responses from the Internet were coming back just fine.
The phone assigns IP ranges in the 192.168.0.0/16 range to its clients on the USB and wifi tethering. And those 192.168.x.x addresses were being seen on the outbound rmnet0 interface unmolested. Perhaps that's how we're *supposed* to indicate that it's tethered data, and we let the carrier perform NAT for us at their end?
Either way, running this command seems to have 'fixed' it for me, and with my Samsung Galaxy S3 on Orange UK I now get functional tethering again:
su -c "iptables -tnat -A natctrl_nat_POSTROUTING -s 192.168.0.0/16 -o rmnet0 -j MASQUERADE"
Obviously there's nothing preventing your carrier from assigning addresses in the 192.168.0.0/16 range to the device itself, and I have no idea what the various rmnet[012] devices are, so this isn't a "fix" for the general case but most people with a rooted phone should be able to work it out from here...
Click to expand...
Click to collapse
Assuming I'm on the right track (symptoms are the same), I'm looking to figure out how to adapt this to work for me. Unfortunately messing with iptables is well over my head. Sigh...

Yeah i had the same problem FoxFi Worked for me as well

this will forcefully allow tethering no matter what...
If this is over your head, do NOT do it! You can permanently brick your phone!!!
http://forum.xda-developers.com/showpost.php?p=15931904&postcount=1
This goes to the hardware level and mods things to make it look just like your phone is pulling the data not tethering.
Technically this will work on any and every motorola phone

je2854 said:
this will forcefully allow tethering no matter what...
If this is over your head, do NOT do it! You can permanently brick your phone!!!
http://forum.xda-developers.com/showpost.php?p=15931904&postcount=1
This goes to the hardware level and mods things to make it look just like your phone is pulling the data not tethering.
Technically this will work on any and every motorola phone
Click to expand...
Click to collapse
Thanks for your recommendation je2854.
Good news: successfully made the changes, and phone is not bricked.
Bad news: same trouble as before. I can create a network and connect to it, but can't get a DNS server (for either USB tether or WiFi Hotspot).
Really frustrated here. I've reverted to a trashy LG L7 as my primary phone. Slow and no hardware kb, but at least it works. Sigh... Droid 4 going back in the drawer until someone figures out how to rewind to ICS.

Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!

cellzealot said:
Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!
Click to expand...
Click to collapse
speaking of flashing... I have purchase one of your OTG adapters.... b-e-a-utiful work you have there!
works amazing! even on the HP TouchPad! (it charges faster like it should)
Also you are correct, I used to have a D3 and that hack works well...
could you kinda point me in the right direction of the SQLite hack? I have that and would like to try it...
(Although I already have tethering enabled via family share)

WaHoo!! Consider yourself kissed!
I'm typing from my tethered laptop. Not sure what did the trick, as I've tried WiFi Tether before with no joy.
I did flash the 18_2 JB, though, and tried the WiFi Tether settings you recommended. Up and running. And grinning.
THANKYOUTHANKYOUTHANKYOU for bringing my Droid4 back out of the drawer it was banished to a couple months ago!
cellzealot said:
Just an FYI about the method posted above.
It is only for legacy 3G CDMA/EVDO devices like the Droid 3 and does not work at all on any LTE capable device with SIM based authentication.
But the good news, as stated by tcrews above, is that wifi tethering works just fine under 4.1.2 using the SQLite Editor entitlement check mod and also
WiFi Tether for Root available in the Play Store works very well under 4.1.2.
Use the Generic JB wlan1 profile and netd-ndc(master) setup method and it works as it always has under previous OS versions.
I am tethered to my D4 right now posting this with the latest cdma_maserati_9.8.2O-72_VZW-18-2_1ff.xml build released a week or so ago flashed on it.
It works!
Click to expand...
Click to collapse

Yay!! Congrats! Glad to help out...D4 is still a great device and for better or worse it is still "best in class" of all the hardware qwerty keyboard phones.
Good luck!

none of above work for me.
verizon build # 9.8.20-72_vzw-18(debloated with script)
entitlement check edit works and keeps thru reboot
sqlite editor (install in play store)
goto:
settings storage: (hammer and wrench icon. says "com.Motorola.Android.providers.settings" below it)
settings:
66 entitlement_check:
long press over the 1, change to 0 and click save
exit and reboot
native hotspot works

[Q] VZW Moto X as Hotspot

So I am strongly considering the Moto X not that Verizon has Moto Maker and the 32GB verizon. The one thing I love on my current phone running CM10.2 is the ability to tether my laptop to it for internet access without getting charged extra by verizon while I travel. Usually in a monthly billing cycle when traveling with work I'll consume about 20GBs of data. Can I do this with the Moto X without getting charged tether fees? Do I need to root it to do this?
FYI: I'm i'm on an unlimited plan

If you root with RockMyMoto, yes..
For using Wifi Tether for Root app, see -> http://forum.xda-developers.com/showthread.php?t=2449534 You MUST use the specific version now linked in the first post, or it wont work.... In other words, do NOT get the version from the Play store. (I'm using this way with my Rooted X, also unlimited plan)
To use the built in tethering app see -> http://forum.xda-developers.com/showthread.php?t=2443562 (I haven't tried it, but there are many reports in that thread of it working).
If you don't want to root, then you could try Foxfi. Not sure if it works, I've never used it.

I have always used THIS, on multiple phones. I'm on the 3.3 beta 2 and it works fine. Go into settings, and make sure the device profile is Generic ICS/JB (wlan0), and check the WiFi driver reload, MSS clamping, and Routing fix options.

gokart2 said:
I have always used THIS, on multiple phones. I'm on the 3.3 beta 2 and it works fine. Go into settings, and make sure the device profile is Generic ICS/JB (wlan0), and check the WiFi driver reload, MSS clamping, and Routing fix options.
Click to expand...
Click to collapse
For some reason I couldn't get that version to work on my Verizon X. While the PC and tablet saw the X, it saw it as WLAN0, and never properly connected to the phone.
The thread I linked to has a patched version that works properly for me, including seeing the "hot spot" as the SSID I set on the phone, and letting the PC and tablet connect to the phone and get to the internet.

The x is awesome for one. All u gotta do is root and follow the thread to use built In tethering appreciate. Works great. Or better yet flash Nitro's eclipse ROM. Its all done and its a great rom
Sent from my XT1060 using xda app-developers app

KidJoe said:
For some reason I couldn't get that version to work on my Verizon X. While the PC and tablet saw the X, it saw it as WLAN0, and never properly connected to the phone.
The thread I linked to has a patched version that works properly for me, including seeing the "hot spot" as the SSID I set on the phone, and letting the PC and tablet connect to the phone and get to the internet.
Click to expand...
Click to collapse
I did notice the wlan0 where on the other device I had u could change it or use the ssid, but my tab and others will connect? The initial connection always funks up, usually just have to cycle WiFi from the device and cycle tether too. U try reboot, fix perms, and cache/dalvik wipes? Haven't tried modifying that system apk, heard about some issues and this never gives much, if any.

gokart2 said:
I did notice the wlan0 where on the other device I had u could change it or use the ssid, but my tab and others will connect? The initial connection always funks up, usually just have to cycle WiFi from the device and cycle tether too. U try reboot, fix perms, and cache/dalvik wipes? Haven't tried modifying that system apk, heard about some issues and this never gives much, if any.
Click to expand...
Click to collapse
I tried everything. Yes.
I liked the way wifi tether worked on my past phones. Using the patched copy found in this thread -> http://forum.xda-developers.com/showthread.php?t=2449534 , which is also needed for the GNex w/4.2, works just like it did on my Bionic, Thunderbolt, and other past phones. No issues. After initial config and allowing SU, just launch the app, tap to start tethering, go to my PC, Tablets, etc.. and connect and go.
The APK is originally from https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c109 however, I just noticed lower down in that discussion a patch was added to the experimental 3.4 ( https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c197 ) so I might try that.
I don't feel the need to mess with those system files to use the phone's built in tethering app. I don't have to. I only offered that because some were using it since Wifi Tether for Root wasn't working.

KidJoe said:
I tried everything. Yes.
I liked the way wifi tether worked on my past phones. Using the patched copy found in this thread -> http://forum.xda-developers.com/showthread.php?t=2449534 , which is also needed for the GNex w/4.2, works just like it did on my Bionic, Thunderbolt, and other past phones. No issues. After initial config and allowing SU, just launch the app, tap to start tethering, go to my PC, Tablets, etc.. and connect and go.
The APK is originally from https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c109 however, I just noticed lower down in that discussion a patch was added to the experimental 3.4 ( https://code.google.com/p/android-wifi-tether/issues/detail?id=1661#c197 ) so I might try that.
I don't feel the need to mess with those system files to use the phone's built in tethering app. I don't have to. I only offered that because some were using it since Wifi Tether for Root wasn't working.
Click to expand...
Click to collapse
editig one cell in the system settings to get the built-in hotspot app to work is hardly messing with the system files. i've done this on my last three phones and they've all worked flawlessly. plus the built-in app has decent security features.

640k said:
editig one cell in the system settings to get the built-in hotspot app to work is hardly messing with the system files. i've done this on my last three phones and they've all worked flawlessly. plus the built-in app has decent security features.
Click to expand...
Click to collapse
I know you read the one thread I posted a link to as you asked about doing the SQL edit, and posted a screen shot from your D4.. Its OP talks about replacing a bunch of APK files which are system files...
In Post #24 of that thread, thepolishguy the SQL tweak doesn't work.
... hence my saying I didn't want to mess with a bunch of system files.
Not to mention, side loading an APK and using it is easier. It might not be "cleaner" or seem as "integrated" but it works.

Awesome thanks everyone. I defintely plan on rooting my phone and installed xposed.